Difficulty accessing the loader program
My lightroom was working fine 1 minute then it shut down by itself and now I can't open more. It says error reading the preview cache.
Greetings!
You must remove the preview for your Lightroom Catalog Cache.
It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted. Here is a picture of what it is named as default LightroomcatalogPreviews.Lrdata.
Location /Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows Pictures/Lightroom on MAC
Delete this folder and restart Lightroom
Let us know if this helps
~ Assani
Tags: Photoshop Lightroom
Similar Questions
-
Impossible to access the QuickBooks program
I tried to access my QuickBooks program and got a pop-up message from:
Microsoft C++ runtime library
Program; C:\Program Files\Intuit\QuickBooks2005\qbw32.exe
abnormal termination of the program
I n ' a clue how to approach this problem... Any help would be appreciated...
Hi Jack,
You can consult the following Intuit article.
-
Original title: Code43 error (built-in) Bluetooth
I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43
that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result
Hi DerekWilliams,
What is the brand and model of your system?
You can try the following steps and check if it helps:
Method 1:
Try to run the corner hardware store and check the issue.
For more information, see the article:
Code 43: Windows has stopped this device because it has reported problems
Method 2:
You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:
For more information, see the articles:
-
HP Pavilion G6 2149tx battery or the load program
Greetings!
Guyz yesterday I was using my laptop support, once completed it disconnected from the load after a few hours of work when I plugged it again say "plugged in, do not load", but after 1-2 minutes later, I saw the icon it say of "plugged in, charging»
Can you please tell me what is it!
-What is the charger and the battery safe?
Thank you
Hi Jess - ul - Abdin, welcome to the Forums of HP. I understand that your notebook does not immediately load after the insertion of the adapter. Sounds as if it was a behavior normal, as shown in this document explaining a precaution security put in place in your laptop: battery charge delayed when operating in high ambient temperatures laptop
Let me know if it helps.
-
Help with buttons to access the loaded layers
Hi all... Using Flash CS3 and AS3 to build a learning module that loads different layers of SWFs of the buttons on the main screen. Got this work without problems. What I want to do is to add buttons to provide learners of features, specifically a next button, the "back" button and a check box that will keep progress automatically. I did some massive research and so far nothing seems to work. Seems like I am going so far is the main layer, not the new layers as they are loaded. Here is what I tried with the back button; the next button uses nextFrame and Handler2. It does not work. Not even sure how to start with the check box for advance auto. Any help would be GREATLY appreciated.
Mark
back_btn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler1);
function mouseDownHandler1(event:MouseEvent):void
{
MovieClip (root) .prevFrame ();
}
If you try to get the swf loaded in advance and not the main timeline, you need to target the loader.content, not the root, as in:
MovieClip (loader.content) .nextFrame ();
-
Error "Change Windows settings" when trying to access the installed program Pastel 11
Original title: can not enter in the program that I installed
I installed the version 11 of pastel and all succeeded but now I'm trying to enter pastel it is said to change windows settings. How do I do that?
Try to reinstall by using compatibility mode.
See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.
Windows 7 Compatibility Center
Check if your application software or hardware is on the list
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Software:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software
You can also try to run the program in compatibility mode
You can find more information on compatibility modes in the articles below:
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question
The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:
Run in Windows XP Mode requires:
(1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).
Windows XP Mode and Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/default.aspx
Windows XP Mode now accessible to more than PC
Get started with Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx
http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/
Windows 7 - upgrade Express features:
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade
-
Difficulty accessing the virtual private network (VPN) to run on VMware Fusion
I use Mac OS X 10.5.6 with VMware Fusion 2.0.1. I am running Windows XP Professional 2002 with service pack 3 and the 5.0.01.0600 Cisco VPN client. I couldn't connect to my home institution, even if the Mac has no problem making this connection on the same server using a client provided Cisco VPN.
I tried bridged and NAT connections. For packed I put the XP network settings to DHCP and of course, he is able to get on the internet. It detects the VPN server, but the client does not let me enter a password. Only a single character is accepted. For the NAT settings, I used normal settings for the XP operating system I internal thought Windows communication would be tunnel by the VPN connection on my Mac. But I can say that it does not work.
I prefer to use the NAT connection if possible as this seems the right way to do it and should be more simple. Any thoughts?
Jan
I think that there is a good chance of your router only supports 2 connections to the same VPN at the same time, and that's why you can't have the Mac and the VM connected at the same time. According to your needs I think you only need one or the other connected at a given time. When the Mac is connected you can access VPN network resources by placing the virtual machine mode NAT network. When the Mac is not connected, then run the VM in bridged mode and VPN with only the virtual machine.
I run 2 Windows XP Pro SP3 machines virtual enough daily, each connected to a different VPN. My Mac is not connected to a virtual private network (and does not need to). This configuration allows to my Mac to access local network resources and the virtual machines to do everything that is required through the VPN. I am running customer Cisco 4.6.x on a virtual machine and a client owner on the other.
-
Our members should be good. Not sure why he thinks I'm overwhelmed. Any help on the situation would be greatly appreciated.
Hello
Please try to sign out and sign back in.
Connect and disconnect activate Cloud Creative applications
Kind regards
Sheena
-
How to access the BPM 11 g load useful or process varibles in the workflow of ADF
I'm trying to view/edit the data in a user interface that is linked to a database by using a foreign key, requestId. The foreign key comes from a BPM process where it is spent in the workflow, a human task. The foreign key comes process variables or values of payload. I know that I can simply load the payload in BPM with the data in the tables, but I'm looking for a better solution use the ADF business components to view and edit data directly in the user interface.
The BPM process uses a web service to start the process. Web services takes a primary key as a parameter to reference a column in the database table. The data is pre-filled with content and a primary key reference. The first activity is an activity of the user. I want the workflow behind the user activity to accept this primary key and use to locate the line in the database, so related views of the database delimited ADF business components can work to present the data in the user interface.
I tried two approaches to the problem. The first uses the setCurrentRowWithKeyValue operation. The other changes the SQL where clause, used by the ADFbc iterator only returns one row for the given requestId. Both of these approaches fail to work because I don't know how to access the load BPM or variable data entering the workflow. Here is the piece of code that I used to try to define the row using the value of setCurrentRowWithKey:
public String setRequestId() {}
FacesContext context = FacesContext.getCurrentInstance ();
Object requestObj = context.getApplication () .evaluateExpressionGet)
context, "#{bindings."(, Number.class) RequestId.inputValue "};
If (requestObj is nothing)
Returns a null value.
RequestId number;
requestId = (number) requestObj;
ITR DCIteratorBinding = (DCIteratorBinding)
getBindings () .get ("PatfRequestHdrView1");
itr.setCurrentRowWithKeyValue (requestId.toString ());
Returns a null value.
I didn't get very far with the second approach, change SQL where clause, because I do not know Groovy. I think I need something like:
adf.object.viewObj.RequestId. but it is not a viewObject associated with BPM data, so I don't know that this particular expression will not work.
Any help you can give me is greatly appreciated.
Kind regards
MarkTry this code in your method:
FacesContext context = FacesContext.getCurrentInstance ();
String ctx = (String) context.getApplication () .evaluateExpressionGet (context, "#{pageFlowScope.bpmWorklistContext}", String.class);
String tskId = (String) context.getApplication () .evaluateExpressionGet (context, "#{pageFlowScope.bpmWorklistTaskId}", String.class);
IWorkflowServiceClient workflowSvcClient = WorkflowService.getWorkflowServiceClient ();
ITaskQueryService wfQueryService = workflowSvcClient.getTaskQueryService ();
IWorkflowContext wfContext = wfQueryService.getWorkflowContext (ctx);
Task myTask = wfQueryService.getTaskDetailsById (wfContext, tskId);
XMLElement xmlPayload = (XMLElement) myTask.getPayloadAsElement ();
get the payload as a string simple, useful for debugging
java.io.StringWriter writer = new java.io.StringWriter ();
xmlPayload.print (writer);
String payloadAsString = writer.toString ();
extract payload values: use methods in Oracle XDKSee also this post:
-
Difficulty accessing basic programs
I have problems to access the Basic programs, such as accessories, in the start menu. When I click on start > all programs > Accessories > entertainment, for example, I get "(empty)." Even for Microsoft Office > Microsoft Word. But if I search the programs individually through start > search function, I can open programs like that.
Not sure how this happened? I would like to find a way to put all these programs back on my Start menu. Any help would be appreciated.Hello
see this link:
-
- Last week I bought Adobe Acrobat Pro XI - it does not work - I can access the forms - but I can't access the Basic program - reps tech worked on it for a long period of time last week and now I can't even open the Basic program. Frustrated
2 weeks as my hard drive (XPS18) locked Windows me - I could not go to a restore point, I couldn't do anything. So I had to start from scratch - re-load the operating system - windows 8.1 Pro 8.1. Then it is time for reloading MS Office 2013 - I got my Dell/MS product key - but had to get involved Microsoft (do whatever they did) to allow me to put it back in my current product key. All resolved, then is the time to go to my Adobe product - I've contacted Dell and I shared the purchase and shipment showing slip $ 299.00 for the Adobe product. I assumed that it is in my digital library - I could not find any digital library - so I called the customer support number (Overseas) and they couldn't help me. Bottom line, I paid for an installed electronic product and don't have no way to access to re - load. After several days and calls - I am at my last appeal on October 23 in the morning - bottom line the tech rep could not find any information on my Adobe product. In order for me to get my business online, I ended up buying another Adobe product price still an another $ $299,00. Yes, it was a new version of what I had, but again he did have to pay full price, even if it's an upgrade, then after installation, integration, and the Fund - I asked for documentation for the Adobe product and the license key. He said "do not worry about this, all you have to do is call the customer service number and we will help you" - well this isn't enough for me - because you can see above what happened earlier and I am complete was dissatisfied with the results. I've been a long-time buyer/user and believe in the Dell product - but the service the customer to your loyal customers really sucks! As a consumer of your product (s), all that I pay because I should receive the required documentation, the numbers of license and any information related to that hardware, software and firmware - I should have a way to access.
Thank you
Gene Davenport
Hi gdavenpotx,
No more, Adobe provides Acrobat XI, seems that you purchased from a dealer.
Please run this tool cleaner uninstall all previous installer Acrobat Download Adobe Reader and Acrobat tool - Adobe Labs, retsrat your system & reinstall it using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.
Activate by using the serial key provided to you. If the serial key still does not work, please contact your Acrobat reseller.
Kind regards
Nicos -
I can't access the startup folder
My computer has been terribly slow. It runs Windows Vista Ultimate Service Pack 2.
I thought to reduce the number of startup programs.
Click on the change of starting programs in control.
I get the message in a window pops up: Windows Defender is disabled. She added turn on and open windows defender.
When I click on this link: I get the Windows of your authorization needs to continue. When I click on allow that I get the message «Windows defender...» »
I'm kind of a loop.
In a nutshell, that's the problem.Another way to access the startup programs.
Attention... Make sure you understand the function of the program UNTIL you turn it off.
Start > Search box, type msconfig > Enter > Startup tab > here is the list of startup programs.
to disable... Uncheck the box in front.
to activate the checkbox....
Click OK when finished.
-
Determine the width of the loaded clip
Hi all
Is there a way I can get and set the width and height of a loaded clip? I created a movie then loaded and empty empty a small swf file in the film with loadClip. I now want to determine the width and height of the loaded clip and it adapts to the size of my movie dimensions. Is this possible? Although the film load fine and I can position its x and y coordinates, the width and height show as zero.
Can someone help me with this one? I use Flash Professional 8.
Thank you
BrayneYou must wait until loading is completed to access the loaded SWF _width and _height. and then you'll see the _width and _height of objects on stage in the first image if you access these properties as soon as the SWF is initialized.
-
My computer has suddenly decided to stop loading programs. As it happened, my mouse in the right hand by clicking the ability disappeared. The toolbar at the top of the screen works differently and will not help load, the dropdown under FILE no longer exists, the drop-down list under TOOLS decreased by only 2 items, (POP UP BLOCKER AND SMART SCREEN FILTER) and INTERNET OPTIONS no longer appears. The internet is a mess, especially with whatever it is when dealing with photos. I used to be able to click on many photos and expand in doing so. No longer. I used to be able to right click on a photo that has produced a menu drop down includes SAVE AS but no more. If I can get a web page to the top at all, it cannot be browsed. Although the web page shows "life" nothing cannot be engaged on the screen by clicking on its characteristics. Earlier this week, I could load games like SOLITAIRE, but even the game features were incomplete. That game normally has some features TIP link in the upper left of the page of the game but who went and now it will not load even upward. One of the last messages that I had was the one who said, "AN ERROR IS PREVENTING the STARTING PHOTO GALLERY VIEWER WINOWS." A message that I had before I told him, ' COULD NOT CREATE THE SCHEDULED TASK for THE FOLLOWING REASON: THE REQUEST IS NOT supported 0 X 80070032.» I recently tried to load OPEN OFFICE.ORG and it could not load the displayed computer ERROR 1935. He also says, "HRESULT 0 X 80070091". I don't think that I will be able to access the Microsoft Forum for any answers that might come my way so I would be VERY VERY happy if someone could answer my e-mail address that, for now, still works: * e-mail address is removed from the privacy *. Thank you for taking the time. Best regards, CharlieChanFan
Hi CharlieChanFan,1. from when are you facing this problem?
2. any recent change in software/hardware on your computer?
3. What is the full error message about solitaire game?Scenario 1: Operating system won't load does not have the following features.a. toolbar running differently (do not load file menu, the Help window, tools)
b. games such as Solitaire features do not appearTo resolve this issue I suggest you to follow these methods provided below.Method 1:Try the SFC scan on the computer.Reference:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833See also:How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Method 2: Try to solve this problem with boot.See the following Microsoft KB article:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.Scenario 2: Troubleshooting problem of Internet explorer.Step 1: I suggest to perform an optimization of Internet Explorer on your computer and find the number.
How to optimize Internet Explorer
http://support.Microsoft.com/default.aspx/KB/936213
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settingsStep 2: Visit it below mentioned link and follow the instructions to solve the problem of Internet Explorer:Tips for solving problems with Internet Explorer
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-ExplorerScenario 3: To solve the problem of the Windows Photo Gallery, I suggest you follow the steps inScenario 1.Scenario 4: Error code 80070091 means "the directory is not empty.I suggest to run the application as administrator and check for the issue.a. right-click right the program and select Properties
b. on the Compatibility tab, select run this program as an administrator
c. click on apply and OKNote: If none of these methods provided and steps resolve the issue, then I suggest to create a new user account, try to fix the damaged user account and control the issuance.For this you need to follow the link below.Create a user accountFollow the link provided below to fix the damaged user profile.Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileIf the problem persists then I recommend you to run online Virus Scan to remove any infections, as appropriate.
Follow the link below to start the free online scan:
http://OneCare.live.com/site/en-us/default.htm
Also, follow this link below:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Satellite L40-170 - cannot access the parition of disc to load Windows XP Home edition
I downloaded Intel storage disk manager 32 bit on my flash. I hit F6 again to load Windows XP Home edition, but it tells me that the startup of Windows XP Home edition program is impossible to access the disk containing the partition.
What software do I need?Hello
This will help your for sure:
[How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]
Check this doc from Toshiba and post feedback after installing the SATA driver.
Concerning
Maybe you are looking for
-
Vista SP1 has reduced graphics performance
I installed Service Pack 1 through Windows update today and it decreased my laptop performance much :(For example my GPU and CPU had 68000 points in aquamark3 without SP1, but after installing did a test and got only 53000. Later, I removed SP1 and n
-
Why my monitor goes into hibernation every 30 seconds and how to fix it?
It doesn't matter if I'm on the web, in my yahoo email or file open on my drive C:, my computer times out after 30 seconds, then the screen is replaced with my screen saver. Does anyone have a solution for this problem? It's annoying when you const
-
scrolling with the touchpad.
I use a laptop with Windows 7. When I am trying to up or down in a document internet etc., the page doesn't move upward or down 1 line at a time. How do I change the settings, so I can move more quickly and smoothly without the entire page that nee
-
Windows Help explains how to use the character map to copy or drag special characters in Unicode-aware applications. In Vista, it was possible (but heavy) to insert special characters using the keyboard with the method known as Alt-plus, which has on
-
Ergonomic configuration Sculpt natural key
I just "upgraded" my natural ergonomic 4000 for a sculpt. The material is excellent but the configuration utility is useless. The Microsoft Mouse and keyboard Center does not allow me to reconfigure the windows keys 8 only the pause/start button can