Vista SP1 has reduced graphics performance

Similar Questions

• How to know if Vista SP1 has been installed on the Satellite P200

  Can someone tell me how do I know if I have Vista service pack 1 on my laptop P200?
  Some updates on day of Tempo of Toshiba requires it, but I don't know if I have it!

  'Computer', 'properties' simply said Vista Home premium.

  Thank you.

  If you do not find in *-> System Control Panel *, then SP1 has not been installed on the laptop

• Re: Equium P200 close issue with Vista SP1

  My Equium P200 seems to have developed a problem when stopping down.

  If I select 'Shut Down' option in the Shut Down menu then all revenues, but while the laptop restarts itself and there will be a 'blue screen of death' teling me he does a memory dump physical.

  When it is complete Notepad starts and there is a message saying that Windows (Vista SP1) has recovered from a serious problem.

  Any ideas on how to fix?

  Thank you

  AFAIK SP1 could create serious problems because of the problems of compatibility between some drivers and tools.

  Have you noticed the same issue without SP1 installed?

  I think you should check this!

• Satellite P100 - no sound after installing Vista SP1

  The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

  I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

  I tried to restore to before the time when SP1 was installed.
  I updated the BIOS to the last on the Toshiba site.

  I pulled my hair.

  Someone at - it any other suggestions?

  It s certainly a useful information. Thanks again!

• Vista SP1 Installation 936330 question

  Hello

  I bought a HP Desktop used with Vista Business on it. Vista SP1 (KB936330) shows (two) installed and cancelled in 'history of the Windows Update.  The last time I tried to install SP1 a message stating that "this will take a few hours and your PC may restart several times" appears.  As soon as I started the Setup he quit smoking.

  I tried to solve the problem using the method described in the article, "Windows Vista SP1 (KB936330) issue", but it did not work.

  At this point I don't know if Vista SP1 has been installed or not - because he says that both cancelled and installed - as mentioned.

  Another point that may touch, is the PC has only either 7 on it.  I tried to update IE 9, but whenever an error message appears and I can't download it.

  Any help will be greatly appreciated!

  Terry

  Hello
  Thanks for posting your query to the Microsoft community. Sorry for the delay in responding. Before you install the Service Pack, I recommend you follow the steps in the section "before you begin" of this article and check if it

  help.

  You can also follow the suggestion of PA bear MS MVP of this thread and check.

  Hope that the information provided has been helpful and let us know if you need assistance in the future. We're blad for help.

• How to install Vista SP1 after that 947366 troubleshooting has failed?

  I have Vista Home Premium 32-bit. I want to install SP1 (and, eventually, SP2 before the April deadline, deadline of 2010). I tried the "Windows Update" - it did not work. I downloaded the installation manual - it did not work. I tried searching for an answer in the forum "Install Vista, upgrade and Acivate", and Mick Murphy (Microsoft Partner) referred me to this forum, the forum "Windows Update". This is probably the right forum to deal with SP1 installation problems vis a vis Vista. Could someone please offer some advice on what would be my next step in the installation of Vista SP1 32-bit? To be more precise on the substantive contribution: I met this http://go.microsoft.com/fwlink/?LinkId=101139link, which redirects to this link http://support.microsoft.com/kb/947366and this link 947366 is where I went through resolution 1 to 4 of the resolution in a vain attempt to get SP1 installed on my computer. In other words, I've tried every resolution 1, 2, 3 and 4 and each result is a pop-up window evoking me the 101139 link. ATER each resolution has failed, I reached the bottom of 4 resolution follows her where:

  Note If the problem is not resolved, this content cannot help you. So, you might want to visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/contactus
   
  which of course makes back off the screen of troubleshooting altogether. I tried to call Microsoft and their lines are busy all the time. I hope that someone else has experienced this similar problem. I did much research on Google, nothing helps. I hope someone in "Microsoft answers" can provide a response to my "question of Microsoft." Again, my question is: what should I do to get SP1 is installed if resolution 1 to 4 of the resolution at this link http://support.microsoft.com/kb/947366 failed? The above is the most accurate description of the problem that I can provide, including the specific error codes and I have already taken measures. Please please please help!
   
  Thank you!

  Paulbyl,
  I suggest that you first run the disk error check and make sure your player is no problem.  Then, run the System File Checker to check for problems with the system files.  If he can find and correct and rerun the System Update tool .  At this point, you must perform a clean boot , and then try to start the installation of stand alone for SP1.

  If SFC finds issues it cannot fix you will need to perform an inplace of Vista upgrade.  Follow the steps described in this article.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Graphics performance significantly reduced after an update

  I have a HP Pavilion g4t customizable Notebook PC with 512 MB DDR3 (TM) Radeon HD 6470 M Graphics [HDMI, VGA].

  When I got the computer first, the graphics (graphics of Windows Aero and Business/Gaming) were both rated 5.3 or higher on the Windows experience index.

  Since then, I think that an update (update of the BIOS?) has greatly reduced the performance up to 2.0 (Windows Aero) and 4.4 (Business/games graphics). What happened, and how can I solve the problem?

  The computer is always set to use the Radeon 6470 graphic card - it is not configured to use the built-in standard charts.

  Is there a BIOS setting that I can change? Or is my computer just defective and in need of a repair?

  As I said a graphics driver could have updated your WEI score. This is not mandatory but the most often occurs when the most current drivers are installed. This happened to me several times as well.

  In order to have the correct score of WEI each time I install display drivers that assure me that I uninstall old graphics drivers. After that, restart the computer and install the most recent which ideally is a better way to do.

  I also wanted to know after you have installed the latest drivers from the HP site, WEI score window you clicked on "Re-run assessment" or update my option of partition?

  If it really bothers you, I'd say he hack and change for what satisfies you . There is a guide available at the link below

  http://www.Blogsdna.com/4075/how-to-change-fake-Windows-experience-index-on-Windows-7.htm

• Has managed to recover from the infinite loop restart Vista SP1 "configuration updates stage 3 of 3 0%"- but Windows Update always wants me to install Vista SP1!

  WIndows Update asks me to install Vista SP1. I did and got into the infamous infinite loop of SP1 (infinite loop ' configuration updates stage 3 of 3 0% "with Vista SP1). I used F8 to repair my computer, and I chose a restore before the SP1 update point has been installed. The restore point has been applied successfully, so I have the computer in the back. Super. However, Windows Update wants me reinstall Vista SP1. Needless to say, I am reluctant to do so. But I want to be aware of the Windows updates. What do I do? TIA

  (With the help of Vista Home Premium)

  This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. right click on the file that you saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. ensure that the http://support.microsoft.com/kb/955430 and http://support.microsoft.com/kb/947821 have been installed. (If they were, they would belong to installed updates. If they don't, try to manually download/install.

  6 test cycle.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My Vista computer has ceased to be able to print or use the windows photo gallery, or to be able to perform updates.

  Original title: non-functional computer

  my vista computer has ceased to be able to print or use the windows photo gallery, or to be able to run updates and I can't find any way to put this right - someone had something similar - it custom install service pack 2 for vista and it wont let me download a update Internet explorer 9 - also stop the program index - continues and the print spooler said it works but it doesn't will not print - any ideas?

  Hi John,.

  1. you receive messages or error codes when you try to print or to use the Windows Photo Gallery?

  2. What is the code of error or message that you receive when you try to install service pack 2 and Internet Explorer 9 download?

  3 did you recent hardware or changes to the software of the system?

  You try to perform a restore of the system to a restore point before you have been affected by the problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following articles:

  System restore

  System Restore: frequently asked questions

• I don't know if Vista sp1 or sp2 has been installed on the Acer Aspire deskton.

  Hello

  A notification came sayng Vista sp1 must be installed. We had just aiinstalle Norton 360, then we have disabled to install Vista sp1. The download is complete and the computer has begun to install three downloads. The first download is installed without problems and went to the 30% bar install the second download when in the middle of the installation, the computer said computer closing screen. I knew we were in trouble, because he read on the screen during the installation do not stop computer during installation. Message came after the computer restarted him comes from message on the black screen, saying that the computer is not close properly and the 0xc01a001d 37038/95074 (\Registry\machine\components\Derived data...). I tried everything to get it started all the suggestions, but still a black screen, the biggest problem with this computer, is there had never been installed sp1, sp2, or any protection because it was purchased, I think that somewhere to 2006 or 2007 may 2008. It is an Acer Aspire desktop computer.

  Thanks again,

  gmax3

  If she never had no installed protection because it was purchased, my suggestion is simple, albeit drastic.

  Make sure that your backups and serial numbers and product multimedia/installation/etc key is complete and stored on the computer in question.  Restore the system to factory in any way has been given by the OEM, upgrade completely (all service packs and posterior to the service pack updates) and install your anti-virus software. Reinstall your applications on which would not have been restored in the factory reset.  Update all software from third-party manufacturers to their latest versions.  Install all drivers for newer hardware devices.  Restore your personal data on the machine.

  You'll find yourself with something you can do better than what you have now.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Part number (number removed) has windows vista sp1? __

  Part number (number removed) has windows vista sp1?

  Hi Slandlord,

  Where did you buy the Windows Vista DVD?

  If Service Pack 1a is shipped with Windows Vista, then it will be mentioned on the cover of the DVD of Windows Vista DVD and it will be also mentioned on the DVD so I suggest you take a look at it.

  Or

  You can also confirm it by calling our customer service Central at this toll-free number 1 - 800-(642-7676) Please provide the part number of the DVD for them and they will check the validity of the product.

  For more information, see this link:

  http://support.Microsoft.com/contactus/cu_sc_more_master?ws=support#tab1

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Vista SP1, error 800F0816

  I reset my computer to factory settings. I went on the installation of the updates that come with, until the time came to Vista SP1. I did the thing, he started to install and when it restarted it sent me to the thing system restore and it has not stopped. I was forced to 'pull the plug' and reset my computer to its previous state before installing SP1. Everything was OK until I did my format. Could this be a problem, that I don't have my original graphics card and RAM on my pc (I have them again).

  What else could I give you, so that you can give me the best possible solution. I just want to know where the fault is and how to fix it. Even if I have to buy new hardware or something like that. Could it be, because I did a format and I have all the drivers and other updates, so that my computer crashes after I turn it on in the morning?
  I get error Code 800F0816, when you try to install the Vista SP1
  Thanks in advance
  Andres.
  Edit: The problem Signature:
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1061
  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8FE8CDF7
  BCP3: 8BB37A8C
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  I think I still have these files after restoring that describe the problem.

  Hello

  1. are you able to start your computer normally, now?

  2. Once you get the blue screen error?

  3. is your copy of Windows Vista active?

  Method 1:

  Step 1: Perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Step 2: Download and install a stand-alone copy of Windows Vista Service Pack 1.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  Method 2:

  Check the hard disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

  Check the memory of your computer for any errors.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  I hope this helps.

• Equium L40: slow graphics performance while playing a few games

  In the past months, I have the same played a few games and have noticed that I'm more in addition to lag screen gradually.

  I guess it's due to the graphics card. The graphics card is a Mobile Intel (r) 965 Express Chipset Family, and it is updated with the latest drivers.
  I'm on Windows Vista Home Edition 32-bit.

  Appreciate your help.

  Hello

  I I think that don t games run smoothly because of the lowest performance chart
  I think it s a shared memory graphics card.

  This means that available graphics card memory depends on the amount of main memory.
  For example you laptop has installed 1 GB of system memory and GPU use 251 MB (128 MB video memory + system Shared Memory System 123 MB)
  If laptops use 2 GB of RAM then the GPU could use 358MB (128 MB + 230 MB)

  In addition the Vista operating system needs a lot of resources of the laptop. He needs more as a beginning like Win XP OS. The games are unable to use these resources because these resources are occupied by Vista.

  As you see it installed (Vista OS) software and graphics card can affect game performance

  I think you should try the graphic details of game and other specify settings to a lower maybe level helps.

  Good bye

• Installation update KB936330 (Vista SP1) fails with error 8007371B code. No one knows what is the cause?

  I've had this problem for awhile now and it seems to be no details on how to stop the resulting error code.

  The update of the serivce pack seems almost half installed the first time that I have tried (and the first time she didn't).  Whenever I try once again today, the process bar is automatically up to halfway and then it goes all the way to the breast are contiguous 5 minutes and gives this error code.

  This update seems important.  I can download all other updates without problem and downloaded system preparation tool already and tried to install the update by downloading it manually - the same problem occure.

  Can anyone help please?

  I tried the above and the error persists.  Is there another way?

  The only other 2 methods would be:

  (1) try to run the System File Checker and see if it can replace or repair which is not present. Read the section ofthe System File Checker utility

  (2) do a upgrade on the spot , aka Repair the Installation, if you have the Vista installation DVD: How to perform a repair for Vista Installation

  In addition, Microsoft has extended its offers free support for those who are just trying to install Vista SP1 :

  From: https://support.microsoft.com/oas/default.aspx?ln=en-us&x=8&y=6&prid=11274&gprid=500921&st=1&wfxredirect=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for the Service Pack 1 (SP1). This support for SP1 is valid until August 30, 2010. Availability of support chat or messaging differs depending on your location. For customers resident in America North or Canada, chat and e-mail support is available.

  Some questions may require more Advanced support for which there is a charge.

  Please click on the first link to receive free assistance of MS before August 30 .

  MowGreen Services update - consumer safety