Difficulty of startup disk after copying the OS to new SSD

Similar Questions

• Backups taking over 130 GB of 160 GB, getting 'Startup Disk Full' and the computer does not. Help!

  I fight for free space on one of my older iMacs work and I am to the point that we cannot use it because the startup disk is full.  I've recently upgraded to Snow Leopard OSX Lion (10.7.5) so I could update our video editing software, Adobe Premier.

  We run all our video projects on external hard drives, which does not have the boot disk space and are always good on the erasure of files from the Recycle Bin, audio, photo and video so that they are not get bogged down.  About this Mac shows my 160 GB boot drive contains 8.87 GB Audio, 7.69 GB, 6,49 Photos GB movies, 6.58 GB Apps and a huge 129.34 GB of backups.  I have time Machine backed up on an external hard drive and can't seem to find out where these files are to be removed from the startup disk.

  Turn off time Machine and restart does not clear space.  I have even made the Terminal kill command no matter what auto backups, deleted device and old library version in iTunes, etc.  and I have no backup label appears when I bring up the screen of star wars of the time Machine. I went through so many stages and suggestions to get this machine working again.  I understand these backups are supposed to remove themselves automatically, but why are there still first place if I save on the outside?

  PS I'm not very computer savvy, but I know my way around.  Additional suggestions are appreciated - please let me know if I need to provide more information.

  http://www.howtogeek.com/212207/how-to-free-up-space-used-by-time-machines-local - backups on your mac.

• help - a few corrupt after copying the dng files

  Hello

  I don't know where to post this, but here's my problem:

  When I copy files dng from the computer internal hard drive to a hard drive, many files become corrupt (I guess). When I opened the copies, photoshop just says that he "cannot complete your request because Photoshop does not recognize this file type." On OS x, you can usually see a thumbnail preview for each file, but files corrupt, there is only a symbol of dng, and when I enlarge him to preview it will not also show the image.

  Of the original files all work perfectly fine. Oddly, not all copied files get damaged. I tried two different hard disks, both had the same problem. copy to another location on the internal hard disk works without problem.

  A that someone has encountered such a problem? I couldn't find anything like it online, I don't even know if it's a hardware or software related issue.

  Thank you!

  Hi fleshdog,

  We have sent a private message, please check.

  Kind regards

  ~ Mohit

• "You do not have permissions to access this folder" after copying the files on server 2012R2

  Recently, I've copied the 600GO files and folders using Robocopy from 2003 to 2012R2. No problem with the copy, but the properties of the root of the copied files showed a number of size and file incorrect directory to the same directory on Server 2003.

  Pursuit of the investigation, it seems that even if I am in a group of security on all files (with full control), I can't navigate some of them. When I select some files, I get a popup saying "you don't have permissions to access this folder." If I click on the "Continue" button, I also have access to the folder.

  When I check the permissions applied to the folder, it shows my group listed (with full control in the source files) and now added my user account security and given full control permissions.

  Anyone can shed light on what is happening here?

  To answer my own question, I just find some information about it and it is linked to the good old UAC.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/9061bc1c-42EA-47ed-8c7d-56b07139fb86/you-don ' t-currently-have-permission-to-access-this-folder-click-continue-to-permanently-get-access?forum=winservergen

• Restore failed HP of Win8n after reboot when restoring to new SSD on Pavilion G6 2284 cell ca

  System: HP Pavilion G6 2284 cell ca

  OS: Windows 8

  Relevant additional material: OCZ 240GB SSD Vertex 3 Max IOPS Edition (firmware 2.25)

  Steps to reproduce:

  (1) HP Pavilion G6 2284 portable ca new unboxed

  (2) used HP backup/restore software to create a backup of the OS (22 GB) factory on USB. Commpleted without error

  (3) taken from default HDD and replaced by the new OCZ Vertex 3 240 GB SSD

  Booted 4) of the USB in the restoration of HP.

  (5) restoration of HP software detected the SSD, formatted, copied the files of operating system to it, unpacked the OS files and said she needed to reboot in order to continue the restore process.

  (6) system restarts and displays the error message "Boot device not found - please install an operating system on your hard drive - (3FO)"

  I repeated several times with different options of default BIOS (disable UEFI, check the boot order, forcing the boot hard drive, etc.), the process of restoring without effect.

  If I leave the USB key in when it restores, it starts on the USB and load restore HP, stating that he found the USB as the first boot device (although it is listed after the hard drive in the order in BIOS).

  My best guesses are 1) restoration of HP software is incorrectly written statement details starting sector/UEFI/OS boot during the restoration of the reader and so when the system boots it gets a corrupt boot sector/OS start the details of the statement and so cannot find the operating system.  2) there's a hardware incompatibility with the OCZ Vertex 3 240 GB (2.25 firmware) drive that allows it to be visible in the BIOS and visible to restore Manager HP to format/copy of files, but which prevents the direct start for some reason any.

  Any help and suggestions would be appreciated.  Thank you.

  After several additional hours of troubleshooting (and 2 levels of support HP being completely clueless on the issue), I could solve the problem.  It is not related to the EHR.

  The restoration of HP software, when it is started from USB, seems to alter the UEFI devices and incorrectly referred to the boot drive during the process.  The only way to fix the problem is to enable "legacy" mode in the BIOS (which is not the default), and lower the priority of UEFI boot devices are much lower in the list (the BIOS does not allow a complete deactivation of UEFI, much to my annoyance).  If you start the restore software of HP USB stick with legacy mode enabled, the boot device designation, he writes to the hard drive is correct, and at startup, the BIOS has no trouble finding.

  This issue should occur exactly in the same way with the hard drive by default.  It is not related to the EHR.  This is a bug in the HP restore software that is not properly manage the UEFI boot, which is the default value on this laptop.

  I'm not sure if this problem will be solved by the BIOS update you suggested.  For now, since the system is now works fine, I won't upgrade the BIOS.  I'll keep an eye on its stability, however.

• Install the OS on new SSD

  I have an iMac 27 inches in 2009 and replaces the HD with an SSD. I have the new SSD installed and have a copy of a DVD/CD MBP OS. Can someone tell me how to get the operating system on the new SSD? Is it feasible with the disc MBP?

  Yes.

• Install the EFI on new SSD partition when doing 10 costs of Windows Installer

  I have a similar problem to this topic. Windows was originally (and still is) installed on my HARD drive and I just installed my SSD recently. When I did a clean install of Windows 10 on my new SSD it has not installed the EFI partition.

  Is there a way to create a new partition on the SSD EFI (of course I have to do another new facility) or do I have to physically unplug my HARD drive before you begin?

  my personal rule, I always disconnect a disk with a partition bootable OS, just to reduce the troubles and do not mix the boot managers (I prefer to select the BIOS boot device)

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• You are prompted for the startup disk after PC Backup

  I want to back up files to an external hard drive (my hard drive is a FAT32 file system), I wanted to save on my removable hard drive from WD, but the program would not let me do this.  I discovered that I could put it in a drive on my computer I've ever used.

  So I used the feature to backup all the files on the computer.  After 3 hours, the program prompted me to put in a 3.5 diskette formatted as a boot drive.  (I had everything that I have is a flash drive.) He wouldn't let me change to my flash drive.

  Lost all my info? How can I use this return to the high back, now?

  Help, please

  What is your goal? A single backup? Regular backups? You want to save your data ONLY? Or you want to back up your ENTIRE system?

  I know there are a lot of questions, but it is important to know what it is you want to do!
  In the meantime, change the file system of your external hard drive from FAT32 to NTFS:

  Convert FAT32 to NTFS in Windows XP:

  • Click Start-> Run
  • Enter "cmd" in the field of text labeled "Open".
  • Button click OK
  • If you want to convert drive D (d), enter the "flight d:" command in the command window, find the name of volume for the D: partition
  • Then enter the command "convert d:/FS: NTFS" to convert the partition D: from FAT32 to NTFS
  • When you are prompted, enter the name of the partition volume
  From:
  http://www.partition-tool.com/resource/convert-FAT32-in-Windows-XP-and-Vista.htm

• Lost files after copying the folder

  Hi all

  I made a huge mistake which I deeply hope will have a solution. Let me explain with an example. I have a file has my local drive (unit D) with A1, A2 and A3 subfolders it contains. I have a folder in my hard disk with only A1 inside.
  I copied folder from the hard drive of my D drive accidental everything. As a result, I lost A2 and A3.
  Is it possible to recover these files?
  Thank you very much
  yoelciclista

  Hello

  You can try this free program.

  http://www.Piriform.com/Recuva

  But it sounds like it may be a work of Experts in data recovery; which are very expensive.

  See you soon.

• After copying the CD, he will play on the drive from the computer but not on my CD player

  I copied a few albums of my computer on blank CDs with media Center.  The cd will play through the computer but not on my CD player

  I copied a few albums of my computer on blank CDs with media Center.  The cd will play through the computer but not on my CD player

  ==============================================
  Looks like you have created a data CD.

  You need an Audio CD (music) for playback in a standard CD player.
  (an exception to this rule would be if you had a CD player that has been
  compatible with the files MP3 and you burn a CD of data with MP3s)

  See the following article...
  (scroll down and expand the section "Burn audio CD")

  Windows 7 - burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

• After copying the audio from one project to the other, there is only silence?

  I work in Adobe Premiere CS4. Due to an error with one of my projects, I found myself just copy all the videos, but also audio (which has a lot of splices fadeouts/complex) to another project. When I try to play the audio in the timeline panel, however, there is just silence. The video is very good, although, in addition to things like the scale being off, that I accepted that I'll have to do it again manually. But does anyone have any ideas as to why the audio is just not playing at all? Thank you.

  Select one of the clips of silent and Park then the head top.  Perform an operation to Match Frame by pressing the M key.  That should bring back your audio files.

  -Jeff

• Missing originals after copying photos for a new mac external HARD disk library. How to fix this?

  Move the library of photos hosted on an external HARD during a new mac disc.

  I can open the app and import new pictures, but I can't change any of my previous photos because he complains that the original is not found. The "Use as system library" button is gray which implies that the current library of photos on the new mac is defined as the system library.

  I still have access to the external HARD drive that I imported a couple hundred new photos for the new mac.

  How can I fix?

  How did you set up your library.  You use a library "referenced"?

  

  If Yes, then you have lost the links with the original files.

  You have the iCloud library enabled in the preferences of the iCloud photo Panel?

  

• After copying the files to a CD, the CD will not work in stereo regular... it only works on other computers. Is it a kind of formatting, I need to do to get the CD to work in my car stereo?

  I just want to know how get a CD I save the wrong files to Windows Media Player 9 to work in my car radio...? Do I have to format the drive somehow? I just want to rock in my car!

  Hello

  Burned CD does not not in car CD player
  http://www.andybrain.com/archive/MB/burned_cd_in_car_player.htm

  Why the CD player in my car does not play the CD that I burn?
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0091.mspx#EKF

  Check with the experts here
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Failed to load a backup disk after replacing the hard drive.

  Until I replaced the hard drive, I backed up everything on a disc using the Vista backup program. Now I am trying to get at the way it has been, but I don't know how. Help?

  Start, programs, accessories, System Tools, backup status and Configuration.