Difficulty STString.dll

Similar Questions

• STString.dll is missing

  My pc came with an err STString.dll say is missing from the computer try reinstall I do not know how to reinstall

  STService.exe System err

  and a say the service dll wireless config it that not a registered program will not work correctly this program does not work correctly

  my internet works fine

  my pc works well, but don't know what it is

  Hi Susan,.

  ·         What is the operating system installed on the computer?

  ·         Exactly when you receive the error?

  ·         Is the Windows startup?

  Start the computer in safe mode and check the number. Report of the results.

  For Windows Vista/Windows 7: start your computer in safe mode

  For Windows XP: Microsoft Windows XP - start the computer in safe mode

  Respond with more information so we can help you best.

• my laptop repeat myself that ststring.dll is missing when I turn it on

  my laptop keeps saying that ststring.dll is missing when I turn it on what should I please

  Hi gaynoredwards,

  1. what operating system is installed on your computer?

  2. don't you make changes on the computer before this problem?

  The ststring.dll file is associated with the secure Dell Data Backup Local software.

  You can set up your computer in a clean boot state, and check if the problem persists. It will start Windows by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information.
  Please post back and we do know.

• Error loading STString.dll

  Does anyone know how to fix this error. I get an error message when starting my laptop that says "Of STString.dll is not load correctly." Any suggestions?

  Hi brewzboo,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• How to difficulty Xinput1_3.dll is missing in windows 7 when you try to run Far cry?

  I installed windows 7 on my laptop and try running farcry on it but it gives me an error Xinput1_3.dll is missing.  Now what should I do?

  Original title: how to difficulty Xinput1_3.dll is missing in windows 7

  I installed windows 7 on my laptop and try running farcry on it but it gives me an error Xinput1_3.dll is missing.  Now what should I do?

  Seems that you need to update direct x version...
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/missing-d3dx942dll-and-xinput13dll/44b0396e-a5a2-4BC2-BB32-234aa7cb82dc

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/xinput13dll-error/eef81b99-3244-4526-b740-40ee1469ff5a

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35

• When starting my computer Windows 7, error ststring.dll is missing

  I get an error message that ststring.dll is missing when I start my computer running windows 7 Home premium. He suggests that I have reinstall. What is ststring.dll and how I would like to reinstall it?

  Hi I found this post a while back on another site, I did what it said to do exactly and it worked for me, don't waste your time call Dell they want only to load on a 100.00 to fix and there is no guarantee. Just try to do what that told the post that I inserted below or if you can't find a friend who is more computer savy and have do them. I hope this helps.

  Solved: "STService.exe Unable to locate component."

  Hey

  First of all, my apologies if there is a section of this forum that this thread would be better suited to the. Mods, feel free to move the thread elsewhere if that is the case.

  Anyway, I just thought I'd post a little fix for a problem that I had with my Dell laptop. After a registry cleanup, I started to receive the error message every time after that I logged: "unable to locate component STService.exe. This application has failed to start because STlog.dll is not found. Reinstalling the application may fix this problem. »

  I googled the problem but could not find a suitable solution - all other users have this problem had simply uninstall Dell DataSafe Local Backup (where the problem is) or just simply to stop it running at startup to the top to get rid of the error messages.

  However, if, like me, this isn't something in particular, you want to, here's a quick solution:

  Find "Dell DataSafe Local Backup" within your program files (for me, it was in: "C:\Program Files (x 86) \Dell DataSafe Local Backup")

  Find the STLog.dll file in this directory

  Copy the file - and I hasten to repeat, copy it (do not move or cut the file, because it would be a lot more questions)

  Find the folder Scheduler (for me, it was in: "C:\Program Files (x 86) \Dell Backup\Components\scheduler DataSafe Local ')

  Paste the file into this directory

  At this point, I want to emphasize that STLog.dll is not - or at least was not for me - the only one missing. I also had to copy all the following dll files in the same way:

  CSTError.dll
  STString.dll
  STXml.dll
  STStringArray.dll
  LibXml2.dll
  ZLIB1.dll
  STFiles.dll
  STRegistry.dll
  STPE.dll
  STNLS.dll
  STSystems.dll

• How re - install the program STString.dll missing

  When I start my computer it calls the STSring.dll message is missing to reinstall... Thank you

  Based on the link at the end of this post, STstring is apparently related to Dell DataSafe Local Backup.  There are a few solutions listed in the link.  I never got the error but I went to control panel > uninstall programs and uninstalled Dell Datasafe, such that it was not something that I never wanted to use and he gave me some other annoying messages. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-starting-my-Windows-7-computer-getting-error/d25b1e2a-4CC1-4340-bf5f-3b3efbe00ee6

• Difficulty MSS32.dll is missing or damaged

  CODUO needs the DLL in Windows 7 (I guess).  He has worked with XP PRO-Service Pak 3.

  DLL files updated all the time, so if you download an it very probably will not be at the right level for your computer.  The best thing to do is to get a compatible version of Windows 7 to your application and install it.  The next best thing would be to try to install an older version in compatibility mode.  After that, you could try XP Mode if you have the professional or Enterprise version of Windows 7 Ultimate.

  Good luck.

• How to download STString.Dll for free, it is to my computor disappear

  STService seems to have deleted it's self from my computor how do I get it back free.

  Hello

  1. what operating system is installed on your computer?

  Assuming you are using Windows 7, if you have a Dell computer, I think you will find that it is a problem with the Dell Data Safe backup.

  Reinstall using the program supplied by Dell installation disk or contact Dell support for assistance.

• message keeps popping up aying that STString.dll is not installed

  Message keeps poping up when I turn on my computer. STStringdll is not installed. What is c? What's doing for my computer?  Do I need this? I have a Windows XP - has it from Dell directly, in 2010. Can you help me? My e-mail is * address email is removed from the privacy * thank you... Robin S. Merchant

  Hi Robin S merchant,.

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: This file could belong to Dell DataSafe Local Backup. Search "Dell DataSafe Local Backup" in the Program Files folder. You should be able to locate a backup file and copy it to the C:\Program Files (x 86) \Dell DataSafe Local Backup\Components\scheduler.

  If the above does not help, and indeed, you have the Dell program, contact Dell support for more help and information.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us

• How difficulty Xinput1_3.dll missing?

  I'm sick of this error. Someone told me that it is a DirectX error. So I uninstalled DirectX from the hard drive and reinstalled back. It was a useless effort that the error persists. I also checked if the version of DirectX installed on my PC has been updated.

  Any help will be appreciated.

  James.

  Hello

  What you probably need is the DirectX Runtime June 2010... This is an optional set of DirectX files, which one is be the one you need...

  After downloading the full package, double-click it. This will bring the self-extracting package...

  Don't forget to note where it is saved.

  Then open the folder and double-click DXSETUP, and you should be good to go...

  Here is the link... It will start the download of Microsoft...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• error d3dx9_32.dll

  model: HP 15-d000sia
  I try to install 2 a game after installation I couldn't open it, a box pops up saying lack of d3dx9_32.DLL
  Please help me!

  Hi @israelio

  I understand that you found an error in dll missing after installation, and you try to run a game. I'm happy to help you.

  The dll error you describe is due to a problem with your installation of directx.

  Take a look at this page which is after a little research:

  How to difficulty D3dx9_32.dll not found or missing errors - about.com

• I was told to contract from microsoft to get the ATL DLL system file.

  I am trying to install a new printer. This is the message that appeared: Module c:\windows\system32\hpbmiapi.dll failed to register. HRESULT-2147467229. Please contact the support staff. http://www.hp.com/support to correct this information about "Fatal Error" and MSI-dot4wrp01 ". I am now told to contact microsoft to get the ATL DLL file system. How can I get this file and put it again on my system?

  http://pcsupport.about.com/od/findbyerrormessage/a/ATL-DLL-not-found-missing-error.htm

  Stages of difficulty Atl.dll is missing and Atl.dll errors not found

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 is missing the MFC71.dll.

  Miss me MFC71.dll. I am using Windows7. Where can I download this dll? Where should I put the dll when it is downloaded?

  While I do not recommend that any of the so-called free scans on this site to other parts of the site are worth reading.

  Difficulty Mfc71.dll not found error
  http://www.dll-error-fixes.com/fix-mfc71dll-error/

  A .dll file is usually placed in the Windows / System 32 folder, although you can sometimes dating place in the actual program of Program Files folder.

• I can't open lightroom after I installed windows 10

  I can't open lightroom after I upgraded to windows 10.

  Intel Core i7 to 2.50 GHz

  51 ° C.

  HASWELL 22nm technology

  Monitor generic PnP (1920x1080@60Hz)

  Graphics Intel HD 4600 (HP)

  2047 MB NVIDIA GeForce 840M (HP) 47 ° c.

  ForceWare version: 372.54

  SLI disabled

  Hewlett-Packard, 1968 (U3E1)

  10 64-bit Windows Home

  Can anyone help

  Had the same problem after upgrading to win10 with lightroom 6.6.1 win7pro.

  This fix worked for me:

  Difficulty "MSVCP110.dll is missing" in Adobe Photoshop CC on Windows 10 - YouTube

  by TechFixIt.

  I just used the x 64 file, installed and Lightroom pulled straight up.