Digital Audio Room Correction error: failed to get delay measures

Similar Questions

• How do I remove * error: failed to get cell value * in EN?

  is it possible that I can delete * error: failed to get cell value * financial reports... ?

  I use TxtCase and its gives me this error on the support of point of details...

  How to remove it... ?

  Thank you!

  You can try to delete the advanced, clear the error.

  Using the advanced in conditional removal Option

  Concerning

  Celvin

• How to deal with the error "failed to get the kernel function pointer".

  I was running smoothly first Pro CC all day today. I stopped at the end of the day and now when I try to launch first yet, only a few hours later, the program will not open and I get the error "unable to get the kernel function pointer.  Help!

  I run first on a Macbook pro i5 processor at 2.3 Ghz with 16 GB RAM, graphic card 512 MB intel HD 3000 running OS 10.10.3.  It worked well (although sometimes a little slowly) for one year. I keep the project file on the portable hard drive, media files on a port firewire 800 Gdrive.  It has been working well.

  The only thing that happened between the first success today and refusal to open the first tonight, I ran something of card/holiday calendar interactive multimedia for my son that I had installed a few days ago but not yet opened. When he installed Abobe AIR opened and did the installation.  To see if this can help, I uninstalled the holiday card and rebooted the computer a couple of times. No dice.

  Help!  Luke

  I have the same problem on several machines. What seems to be the case is first is losing track hence basic audio filters are on the system. The only solution that works for me is uninstalling first, then put it back. I found myself to do this every day or almost.

• Get the error message: "driver software was installed correctly" and failed to get the Samsung Galaxy S to connect to my computer.

  Original title: Samsung Galaxy S

  Cannot connect Samsung galaxy s to computer says software driver has not been installed successfully

  Original title: UBS connection I can't get my samsung galaxy s to connect to my computer, it keeps giving me an error message that says the driver software was not successfully installed

  Previous page Next Page

  Hi Jeehadave,

  1 have you tried the steps by Sandeep GNT replied on March 13, 2013?

  2. you receive the specific error codes with the message?

  Usually after installing the Samsung Kies software, you will be able to connect the Samsung Galaxy with Windows.

  Samsung provides the Kies software to communicate with Windows.

  You can try to connect to another USB port and check if it helps.

  If the problem persists even after installing the Samsung's Kies software, then you must get in touch with support from Samsung to get help.

  Hope the helps of information.

• "Error: failed to get the IP address of the destination virtual machine running the converter to assistance server." with a static IP address

  Hi all

  I'm trying to p2v linux 6.4. It fails with the following message is displayed:

  Error: Cannot get the IP address of the virtual destination machine running the converter assistance server.

  I have seen discussions on this message, but they all refer to dynamic IP address, taken from DHCP, as in my case, I use static IP address.

  In the meantime the p2v (which then breaks down...) I open console support machine and saw a message:

  
  

  eth0 is not a recognized interface.

  Can someone tell me what is happening?

  Hello

  I assume you are using converter 5.5. There is a new feature that allows the selection of the network card. However, it works well in the case of Linux P2V. If you have changed the type of adapter, use 'e1000' or 'auto' and try again.

  HTH

  Plamen

• Smartphones blackBerry synchronization error - failed to get the file

  BlackBerry Torch 9860 software v 7.0 Bundle 2406

  Can someone help me with this error message of synchronization:

  "An error occurred during an attempt to access a record of the database of the device."

  Details below.

  engine 08:46:51.759 waiting for the user to input - message WPF event for messageId 15003 raised read 310 records
  08:46:51.762 engine work - full message event for messageId 15003 read 310 records
  08:46:51.859 CBBTransBase::GoToRecord - could not get the file FFFFFB45
  08:46:51.860 error information: 18008 (00004658) (KnownErrorWithLocalizedText), Description: an error occurred during an attempt to access a record of database device., File:.\BBTransBase.cpp, line: 736
  08:46:51.860 CRSyncUtil::GetTranslator: FeedProfileShim2Trans (responsible Trans) BlackBerry
  08:46:51.860 CRSyncUtil::FeedProfileShim2Trans: returns 0
  08:46:51.860 CRSyncUtil::LogFatalTransError: 'GoToRecord()' 'RimBB' translator for the "Contacts" application API returned empty error
  08:46:51.860 CBBTransContact::Close - clean temporary fixation for contacts files
  08:46:51.862 CBBTransBase::Close - Mode: 4
  08:46:51.862 CBBTransBase::Close - commit the change log
  08:46:51.862 CBBTransBase::Close - save information from source database device
  08:46:51.976 CBBTransBase::Close - peripheral close database
  08:46:51.976 CBBTransChangeLog::Close - close change log db. Record count: 474. Db file: C:\Users\Bob\AppData\Local\Research in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Translators\RimBB\Contract{8BCB53647E24F3BB61A8E73C4FDAB}.adt
  08:46:51.990 enter COLTransBase::Close - Mode - 4
  Synchronization of end of 08:46:51.991 with error 2

  Glad to hear it is working now.

  Don't forget to let us know if you have any other questions.

• error: failed to get the value of property 'SetReturnValue': object is null or undefined

  Why did I get this error message when I open the weather channel desktop application?

  Hi Jimmy'Tidwell.

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Check out the link below for the weather channel support and check if it helps.

  Why do I get an error message?

  How do we uninstall Desktop?

  For further assistance, contact the vendor of the software.

  http://support.desktop.weather.com/ICS/support/default.asp?deptID=2552

• P2V to the local computer - error failed to get hardware information

  Hello

  I get an error using vCenter Converter Standalone 5.1.0. I'm trying to convert a local computer to an image on a hard drive external. The local computer is Windows 7.

  The error I get is impossible to get the hardware information for the selected computer.

  Here are the steps I am following

  Select the source type: slot machine tension

  specify the machine: this local machine

  Thanks for any help

  It seems that there is a problem with your volume K:. What is it? Is there a chance to detach or make offline and try again?

• Internal error: failed to get the path of the file directory common 64-bit

  Help!

  I had the worst time trying to figure what to change my path to the registry to resolve this problem. What I discovered Google, I need to change the path to my shared files, it is currently

  C:\Program Files (x 86) \Common Files\

  (I added the------because I read somewhere it was causing problems with facilities)

  I have this problem with some keys:(que toute aide serait grandement appreicated!) plants

  Thank you all

  This is part of what I have listed in the register-

  http://CID-db58e4a03b3dccab.Office.live.com/self.aspx/public/current.jpg

  That matches your entries?

  Your currently connected user name can navigate at this location and records open to the breast?  They can create a .txt file empty which are there?

  C:\Program Files (x 86) \Common Files

  Is your current user have read permissions for this registry key?

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  Finally what programs you are trying to install?  They are compatible with Windows 7?

• Error: FAILED to WRITE DELAY of WINDOWS IN OUTLOOK 2003

  Hello

  Can someone help with this error message that I can't get anywhere with him? I searched on the net solutions to this WINDOWS DELAYED WRITE FAILED error code in OUTLOOK 2003 (I wrote about the rest of the error message because there is more); NONE fixes possible of any kind have worked. This error appears when I start Outlook 2003 and start downloading all my emails (of several different email addresses to Outlook). One or two emails come through, and then displays the error message, then all files are locked, cannot enter into them or delete them, move them etc.

  It seems to have started a couple of days, when I deleted a LOAD of files from my laptop. nothing else was done to the system which has been very stable for several years in all. I also did a few "household" and deleted a lot of surplus compared to files of type system requirements when you make a disc clean up etc.. I cannot now make a disk defragmentation C either, I could before this specific error message started upward. I never saw this error message in my life of entire computer user (29 years).

  Help! I am not able to pay someone to fix it, so post here.

  Thanks, Ania

  Hello

  Step 1

  I suggest to do a SFC scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Step 2:

  I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

  a. click on start, then run.

  b. in open, type cmd, and then press ENTER.

  c. use one of the following procedures:

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  You can see the article mentioned below for assistance.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Step 3:

  If this does not help, then I suggest you to do a system restore. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AppleScript Error-1728 - failed to get document 1

  I'm trying to find out why my AppleScripts I use for automation of numbers do not work this month.

  I have several scripts that I built for the treatment of the expenditure reports and I ran them last time in February with no problems.  Whenever I now them I get the following error message:

  error "Numbers had an error: failed to get document 1." the document number-1728 1

  I looked at this post: https://discussions.apple.com/message/29854515#29854515

  I have not found the cache file listed in the directory of ~/Library/Caches... ask yourself where the hell numbers may be sticking this file in order to remove it and see if this solves my problem.

  All I have this problem or knows where I could find the file cache for numbers?

  Thank you

  Rich

  To solve this problem...

  I had to remove the container file to ~/Library/Containers/com.apple.iWork.Numbers and my scripts are back and working again!

• Get error 'Failed to verify internal {no context}' when using the suite of flow

  Hey guys, I'm trying to get some layer flow using stream suite, but I get the error 'Failed to verify internal {no context}' on After Effects cc 2015. but the same code works fine on After Effects cs6. Here is my code,

  Value AEGP_TwoDVal;

  A_Err err = A_Err_NONE;

  Flow AEGP_StreamRefH = NULL;

  ERR (_suites-> StreamSuite4()-> AEGP_GetNewLayerStream (_plugin_id, layer, AEGP_LayerStream_ANCHORPOINT, & stream));

  Val AEGP_StreamValue2;

  AEGP_StreamValue2 * sample_val = & val;

  AEFX_CLR_STRUCT (Val);

  ERR (_suites-> StreamSuite4()-> AEGP_GetNewStreamValue (_plugin_id, flow, time_mode, time, ignore_expression, val)); 'failed to verify internal {no context}' on this line

  val.val.two_d.x = value.x;

  val.val.two_d.y = value.y;

  ERR (_suites-> StreamSuite4()-> AEGP_DisposeStreamValue (& val));

  ERR (_suites-> StreamSuite4()-> AEGP_DisposeStream (stream));

  And the error code is "A_Err_PARAMETER".

  But the code works fine on CS6. Did you guys ever faced this problem?

  Yes, I think that the problem of thread is the case. I move the whole EI to the idle hook, and now things work correctly!

• I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quic

  I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.

  Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.

• I get a 'Secure connection' error failed with google stating "certificate contains the same serial number.

  When I click on a link to a google search, I get the "Secure connection" error failed in Firefox. He says, "please contact the administrator of the server or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority."

  I followed the instructions here:
  https://support.Mozilla.org/en-us/KB/certificate%20contains%20The%20Same%20serial%20number%20As%20another%20certificate
  and looked at this article:
  https://support.Mozilla.org/en-us/questions/1028103?ESAB=a & As = AAQ

  I uninstalled and reinstalled Firefox, deleted the entire folder profiles and reset Firefox. I see that the older (orphans) article points to my router. However, I have a new router and have updated their software. There is no button to add an exception (as stated in the article), so I can't just work around it. This problem does not occur with IE, so I have a hard time to believe that it is my router.

  How to solve this problem? I really want to change browser.

  Finally, I tracked the issue. The answer was found here:
  https://support.Mozilla.org/en-us/questions/1028985

  It turns out that Avast has a web shield that passes through its own verification of certificate https. Of course, this feature is not quite right and loses track of the certificates. Disable "https scanning" in the settings of Avast resolved the problem.

• Cannot download Fallensword Helper Scripts. Get ' Script cannot be installed error: failed @require json2.js.

  Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install the scripts said "Script cannot be installed error: failed @require json2.js. I did it for my computer every year since I started to use computers. I've never had this before. Please help me to get a fix for this, because I google it and cannot find an answer.

  I am the original author of FallenSwordHelper. It was due to some changes in GreaseMonkey 0.9.0, which made it impossible to have local scripts.

  I did an update (temporary?) so that extra all scripts (such as json2.js) now use absolute URLS.

  See also the official website of FSH