Digital microscope

Similar Questions

• New device

  I got a digital microscope USB of Optex for Christmas and I installed it.  When I connect the magnifer usb port and click the icon for stgart top, it comes up with the message "No Device detected, please connect your microscope directly to your USB port on the PC."  It has already been connected.  Please help me.

  Hi Coinguy,

  Welcome to the Microsoft Answers site!

  1. How you connect the device to your computer?
  2. Try a different USB port and check the status?
  3. You try to install a new driver for the device?
  4. You are able to install the drivers on another computer?

  After connecting the device, you must install the drivers that the computer detects the device.
  You may have received a CD that contains the necessary drivers for different operating systems. If you don't have the driver CD you may have to download the drivers from the manufacturer's Web site and install it on your computer.

  http://www.Microsoft.com/whdc/driver/install/default.mspx

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can I run a 32 bit AND 64 bit Windows Vista on the same computer version?

  I have laptop SONY VAIO 64 bit and a new digital microscope that has a driver 32-bit. I can't the microscope to work and it is not a driver 64 bits for the microscope. Their tech support suggested the installation of a 32-bit version of Vista on the laptop. Can I do this and still keep the 64 bit version of Vista as my main operating system. This suggestion is practical or even possible?

  Hello

  You can double vista 32-bit and 64-bit on your computer

  BUT you would need to BUY the 32-bit operating system vista to install it

  and Microsoft sells more Vista

  they switched to Windows 7

  and what you want to do with your time if it's for work, because you will constantly change the operating system to use if you use 64-bit for most of your work

• installation driver for Qx5 computer microscope

  Hello

  I have a Dell laptop inspiron 13 with Windows 7 (64-bit). My laptop doesn't have any CD player. We recently received a Microscope digital blue QX5 computer (v1); However, when we came to install the driver for the microscope with connects via the port USB is not found.

  I think I have the first version (v1) of the QX5 microscope and so I'm not sure, after being on the manufacturer's website, there is a driver for this device. If I find the right driver how do I know that my computer it will pick up if I downloaded it?

  Thanks in advance for any help.

  When you download a driver, you must usually install.  So, you should pay attention to where it downloads.  With IE and Firefox, you can open the containing folder, so you can do and SEE which he downloaded.  Downloads usually go in your DOWNLOAD folder.  There are usually building instructions to the location that you download from.  If it is in the form of xxxxx. EXE, you can simply double-click it to install it, but look for the manufacturer's instructions.

  Good luck.

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!

• AUTOFILL DIGITAL SEQUENCE

  Spreadsheet Numbers: how, please, can I fill a single column in a single digital series from 1400 and goes to 3000?

  in the cell where 1400, replace the contents with:

  = 1400 + Row)

  Suppose that it is cell A2

  shortcut for this:

  A2 = 1400 + Row)

  Select cell A2, copy

  Select cells A2 at the end of the column, paste

• iTunes digital copy of the film

  I bought Star Wars: The Force Awakens on Blu Ray in April and it came with an iTunes and/or the Google game code to redeem the film. I bought it on iTunes, but I wonder. It is essentially a way to get the legit iTunes version for free, or is it a different version?

  Also I had people telling me that it is not safe to buy digital copies of movies, but I don't know why it wouldn't?

  Hello Ben_2575,

  After reviewing your post, it sounds like you want to know if the redeemed code is an iTunes movie Store and if it is safe.
  I recommend you read this article, it has additional information on the purchase of a code. If you redeem the code in iTunes than it is from the iTunes Store. It is available to be downloaded later as a purchase, so you don't lose your content.
  

  If you choose the later versions, you can download your movie from the iTunes Store: in iTunes, go to the iTunes Store. Select movies from the menu in the upper left corner, then click on purchased under film quick links on the right hand side of the iTunes Store window. Then click on the download icon in the upper right corner of the film. Learn more on download past purchases to iCloud.

  Buy digital copies of DVDs or Blu-rays in iTunes on Mac or PC - Apple Support

  Thank you for using communities of Apple Support. Good day.

• Digital certificates and runaway trustd

  Just improved El Capitan (10.11), Sierra (10.12). Updated the o/s, kept my applications and data on both a beginning 2011 MacBook Pro and an iMac end of 2013.

  First question mentioned was that Outlook for Mac 2016 hung on the iMac, if I tried to open a digitally signed message (DoD PKI-signed). Had to force quit.

  Next issue noted was that Keychain Access hung when I tried to start it. No window of Keychain Access, never not published, if the icon showed in the dock. Open Activity Monitor to investigate and found that the process trustd seems to have run away. The memory of the process was beyond 1 GB. Forced quit Keychain Access, then sent a HUP signal to my trustd process via the terminal. Once he showed up, process trustd memory reached 11.9 MB.

  Trying to reopen the Keychain Access, but it hung again. I let it go for a while, and Sierra informed me that he had become insensitive (thanks!). Killed, then looked at the allocation of memory of trustd. It was close to 2 GB.

  I upgraded the Macbook Pro at the same time (won't do again). Soon after the connection, I noticed that the fan spun. When he didn't slow down after a bit, I open Activity Monitor and saw that trustd process memory beyond 8 GB. (The total physical memory on the Macbook is 8 GB).

  On the iMac and Macbook, I created the new keyrings connection to get rid of all personal digital certificates.

  It helped on the iMac. I work in the old Keychain, so I do not have access to the certificates. If I do, Keychain Access crashes and trustd fled. I can return to normal by sending a HUP and stop smoking-force Keychain Access. In addition, Outlook crashes and trustd fled if I touch a digitally signed message. Again, I can go back to normal in force - quit Outlook and sending a HUP to trustd.

  The set of connection fees did not help on the laptop. trustd to save, eat memory in the process. I could reset by sending a HUP, after which she would free up the memory, but then he save again. From scratch (erase the hard drive, install Sierra) solves the problem of runaway trustd. I did not restore the Keyring containing digital certificates.

  Is this a problem with trustd? I need personal digital certificates to work on at least one of the computers.

  I also have problems with a runaway trustd, although slightly different triggers.  I'm trying to synchronize my mailboxes from several of my servers.  It downloads a few hundred saved messages, then trustd goes into overdrive, the fan is used, and the computer works nothing except trustd.

• Automatically maintain Messages digital Touch

  Some settings on my phone seems to be now automatically "Touch Digital" of messages sent by another user and who are sent by me.  I've just updated to iOS 10.  I have a 6 s phone.  When a message is sent, I do not have the option 'Keep' under him.  It stops automatically.  Anyone know how to disable this option?

  HHave same problem.  My phone works fine but auto girlfriends retains the message. Do not understand why.

• Digital touch messages problems

  Why I can receive and send digital messages tactile animation and my husband can send digital touch messages animated and when he gets then it just shows up as a guess we both same phones and iOS 10?

  Hi rachael2016,

  Welcome to the communities of Apple Support!   Looks like you and your husband are exploring new effects of iMessage with iOS 10.   If the animation occurs on your husband's iPhone, him having check its settings reduce Motion in settings > general > accessibility.   If the Motion to reduce is enabled (green button), turn this setting off.

  Reduce the screen on your iPhone, iPad or iPod touch resolution
  

  When reducing Motion is enabled, certain effects screen change or are disabled on your device, including:

  • You cannot send or receive effects of bubbles or fullscreen in Messages.

  Use effects of message with iMessage on your iPhone, iPad and iPod touch

  Enjoy the rest of your day!

• Digital Touch iPhone

  Hello

  I updated my iPhone 6 more (64 GB) at ios10.0.1. My question is related to iMessage how to turn off the digital automatic saveing to the touch icons?

  All the friend of my friends have an option under each button to explicitly save a digital key, otherwise it will be deleted after 2 minutes. Unfortunately I do not have this option, but it is always saved automatically.

  Please help me find the option to disable AutoSave.

  Thanks and greetings

  Max

  I have the same problem. I started yesterday a message which can be found here: Re: how to enable/disable Touch Digital messages expires after 2 minutes?

• How toggle Touch Digital messages expire after 2 minutes?

  My partner and I have the iPhone 6 Plus and we have updated to iOS 10 today. My phone seems to work fine with Digital Touch but its not.

  When I get a touch digital message, the words "expires in 2 min" appears below the message on the right side. Shortly after, this sentence disappears to be replaced by "Dungeon." If I press 'keep', the message will not disappear in 2 minutes. Similarly, if I send a touch digital message, the word "keep" appears behind the message (on the right side), and if I do not press 'keep', the message will disappear.

  However, this does not happen on his phone. When it receives a digital message Touch, no expression is displayed with the message. The messages it sends and receives never disappear. In addition, instantly when it displays the message on my phone the words "kept" (and currently) appears below the message on the side LEFT of the message. I am advised that he kept my digital touch message whenever I have send one to him, but if I keep one of their own, it is not notified.

  All our message parameters are the same under settings > Messages. For both of our phones, I have enabled iMessage under settings > Messages several times. I restarted the application Messages several times. I also rebooted the phone by pressing Home + Start button / stop.

  All other features to work for him, including stickers and the effects of bubbles/screen, but I can't seem to find where turn the expiry of 2 minutes to Touch Digital. Any help is appreciated!

  (On a side note, we have all two audio messages to expire in 2 minutes and this feature works correctly for us two).

  I have the same problem. I reset my phone, and "expires in 2 minutes" came for a fraction of a second and disappeared.
  PLEASE HELP APPLE.

• iOS touchscreen Digital 10 does not properly

  My boyfriend and I have iOS 10. I can send digital messages touch, and he can see their animation, but he's trying to send them to me, and I only receive static images. Is there a setting that he needs to put on the March? We have scoured the messages and accessibility settings, but I see nothing of what it could be. It also has its "reduce the motion" setting disabled.

  Hi rstandi1,

  Welcome to the communities of Apple Support!

  I see that when your friend sends you a message from digital key, you will only receive static images. When you send a digital message touch, your friend can see it very well. I know how it is important to ensure that you can as well use and enjoy digital devices Touch iOS 10. I have something I want you to try.

  Since you mentioned that you have both use iOS 10, you two should be able to send digital messages touch each other. Please use the following article and make sure that your boyfriend is following the correct steps to send a digital message touch:

  Use the number key on your iPhone, iPad and iPod touch

  Best regards.

• Design of digital touch Apple Watch cancel

  How to cancel rather than send a digital key relying on the watch? Sometimes do not work drawings, and there must be a way to avoid sending them.

  Hello

  Once it is sent, there is no way to cancel it.

• How to create individual tracks of a tape to make a digital file

  I intend to download tapes to the application Garageband to a player via a USB cable. When I downloaded and got in Garageband, I have to change to create individual files to send to iTunes. I'm hoping to do in order to be able to play individual tracks of the videotapes when I sync with an iPod. I'm wishing that I can play them in the iPod even I could play a prerecorded CD by scrolling. I don't want the all digital tape to play without interruption.

  Since I was 250 tapes I want to scan, it would be nice if it was easy to do the editing instead of cut to each track and sending the iTunes Song individually one at a time only more and more.

  Can you help me understand how to do this? Any suggestions would be welcome.

  If you need to split a recording into separate songs which will be sent to the iTunes audio, you can use the cycle area in GarageBand to mark individual songs.

  Drag the yellow bar to cycle through the record, which must be registered as a separate song, then use the command "share > song to iTunes" to add this song as a separate to the album track.

  

  Repeat this for all the songs on the album.

  This help page describes the use of the cycle area: http://help.apple.com/garageband/mac/10.1/#/gbndac973a7d