Dim dark screen on T60p after convert for Win 7

Similar Questions

• Satellite P30-110: the screen is blank, after working for a few minutes

  Hello.

  Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.

  I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.

  Any adviser who can offer are welcome. If you need more information about the problem please let me know.

  Thank you very much

  Hi Paul,.

  If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.

  I suggest that you only contact your nearest ASP for further diagnosis.

  Kind regards

• D drive not available after abilities for win 7

  I installed windows 7 after 2 formatting hard drives and reinstalling windows xp, after the installation of the second drive appears as drive C 01 and not the D drive, I can't access D drive.

  Your problem has nothing to do with Windows Update (compared to the upgrade of Windows). Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem RAM on E1 - 571G after downgrade for win 7 32 bit

  Hello

  After installing windows 7 on E1 - 571G, I can see only 2 GB of usable RAM even if there are 4 GB installed. Is there something to do with UEFI bios which I upgraded to 2.15 last when I was on windows 8.

  Please help me guys.

  See you soon

  OK guys, I got little lead here UEFI - install Win7 and here UEFI USB Bootable , which finally solved my problem.

  I am now under Prof Win7 64bits (eval copy) and the operating system is reading 3.86 GB RAM so now the next step for me is to get a teacher version full Win7 x 64, I think I should be able to get in a day or two.

  Thanks for your support guys. Really enjoyed.

  See you soon

• Satellite Pro U400 - no sound after downgrading for Win XP

  Hello

  I hope someone can help!

  Have just downgraded from Vista to XP pro U400, downloaded all the drivers I could get on the Toshiba site but I still have PCI Device and unknown device drivers are not installed for.

  Think it must have something to do with the sound when I tried to load sound divers, he came up with "cannot find media device" If don't have her no more, anyway don't know what to do next.

  Thank you for the charges

  Hello

  This theme has been discussed here many times.
  It s a general problem with Windows XP!
  If you n t install the patches MS as KB888111, KB835221 and then you would not get the sound.

  You must install these cites patched before install you the audio driver!

  If the driver has been installed you must remove it first before the patches are installed.

  PS: This MS patches are part of the SP3 too!

• Beats Audio disappeared after downgrading for WIn 7

  Recently bought a new laptop with Win 8 Pro (product #: E4T18AV, ENVY TouchSmart 15 t-J000 Quad Edition).  I got the computer to Windows 7 Pro and I thought that I loaded all drivers (drivers missing is more according to Device Manager), but my Beats Audio no longer works.  In addition, the key light mute volume does not work.  The mute button itself still works, but the light does not work.  I tried installing many drivers after a search through the forums, but cannot find the right one.

  Any help is greatly appreciated.

  Thank you

  Hello:

  Please see if one of them solve you audio beats threads is a help to you.

  I think that you need to install the audio driver IDT W8 to support your laptop and both driver page.

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels & q = Beats + Audio #/? solved = true & q = Beats + Audio+ Windows + 7 & Filter = labels % 2CsolvedThreads

• U410 no WiFi after downgrading for Win 7

  Hey everybody.

  I am a newbie in what it is technical so please be nice.

  Recently, I've killed my Ideapad U410 of Windows 8 for Windows 7. Installed all the drivers and all works fine except for the Wifi. He is yet to find a network, it's more like he doesn't even know that there could be something like wifi?
  Has already done some research but I have no idea what could be the problem. Any ideas? If the problem is related to the BIOS?

  I'd appreciate more than any type of help! Thank you!!

  Hey,.

  Thank you for your advice.
  I got the idea to try a pilot Win8 on my now computer laptop Win7 and as if by magic, it works! I don't know why or how but now my WiFi works again.

  Thanks anyway for your advice!
  Kind regards
  Carmen

• IPhone 5 s screen turned black after jettisoning

  I dropped my Iphone 5s in the Park. The screen worked fine after release for 2-3 seconds and that I moved to the bench, it turned black on the first move. The touchscreen works perfectly fine because I can pick up calls. Is my broken screen?

  Hello

  It may help to follow the steps detailed here:

  • If your iPhone, iPad or iPod touch won't turn on - Apple Support

  However, as your iPhone has been abandoned and seems to have suffered damage, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar to organize your iPhone to inspect and, if the service is recommended by Apple, to determine your available service options, deadlines and costs.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/au/retail/Geniusbar/

  Repair service for iPhone price information are available here:

  • price of Service - Support Apple iPhone

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• HP Envy 15-k020us: video flickers and has red screen after running for 2 hours

  After running for 2 hours, my screen flickers then goes red.  I saw a previous announcement but this person was able to solve the problem and the answer has never been published.  I fear that the problem may be due to overheating.  Thank you.

  Hello @Jodonnell715,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are not familiar with works of the function of the Forum, private messages
  this message has instructions.

  Good luck!

• Problem dual screen ' after working for a while, the screen of my laptop turns off.

  Original title: Problem dual screen

  I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?

  Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.

  KR

  bs3dm

  Portable computers support two monitors. The problem may be caused by two reasons:

  1. incorrect power setting.
  2. the problem with the drivers.
  1. you can download and open Microsoft Fix it for the question.
  2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check.

• Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Is there a reason to save the two versions?  The NAVE seems to have no further use other than too much hard drive space.

  Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Why save versions when the DNG is the original and the NAVE seems to just take remote hard drive space?

  I see no reason to keep them, they take a lot of space, one of the reasons to convert to DNG is that they are almost 20% smaller than the ships.

  But it is of course your choice...

• How can I prevent the splash screen to disappear after a few seconds?

  I have a HP Touchsmart all in one by using Windows 7. The machine is brand new.

  Whenever I get the splash screen, if I am not for nothing, after that a few seconds, the screen turns off and then I can make it back by pressing any key and then click on my name from the entrance to ge the rear screen startup.

  Hello jimtiger: I'm not familiar with the Touchsmart version 4 software. It works with version 3 of Touchsmart. Left click mouse any where on the screen click on customize. The opening of new windows screen saver goto adjust the wait time for a longer period of time.  Can also change the settings of computer power. Control in the lower right panel, you will see tools and information on the performance up until it clicks. Top of next window right-click on the adjustment of the parameters of energy.  Check high performance box.  Who will now have a blue dot. Just beside it, you will see the settings of plan up until it clicks.  You will see the screen dims: click the box next to it. My is set to 10 minutes below. Turn off the display: click the box my is fixed to 15 minutes. Put the computer to sleep: click the box my is defined. Never. Brightness is right-wing. Under that, you will see the change, click on advance power settings. Everything has a greater mark in it. Click ok. Close all windows should be all set now.

• HP Pavilion 15 n043ee - dark screen

  The screen of my hp pavilion 15 043ee N laptop is extremely low. I am unable to see anything on the screen, unless I have shine a flashlight on him, and even then, I can barely see. When I connect it to an external monitor, it works very well. I restarted and press f8 to access the bios screen and is also dim there as well. My laptop is only a few months old, and it's very disappointing. Please advise me on how to solve this problem. Thank you

  Hi iverson999,

  Welcome to the HP community! I saw your post about the dark screen on your new building. Good call by connecting it to an external monitor. From what you described, it seems that the converter to display may not work. Since it is a hardware problem and a few months, I would recommend that contact you HP. You can reach HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• Snipping Tool background dims the screen

  The cutting tool opens with a dark gray background, which dims the screen completely.  I don't see what I want to snip. If I "blindly snip", I get a black rectangle.  I have Vista Business with Service Pack 2.  The options do not seem to help.  I searched the web and Microsoft, and I can't find any reference to this problem.

  What happens if you do a right click on the tool and set the properties / Advanced "run as Administrator"?  Again you should not use that, but it may be a workaround.

  You might be able to do something with this information, for example, uninstall and reinstall the tool to uncheck and recheck the "Tablet PC optional components ", see what you think?

  Install or enable the cutting tool in Windows Vista
  http://www.mydigitallife.info/2007/08/17/install-or-enable-Snipping-Tool-in-Windows-Vista/

  If you copy the folder System32 SnippingTool.exe and place in your user folder and run from there it works?