Dimension 2400 Power Pack

Similar Questions

• Dell Dimension 2400 desktop w/XP Home Edition: video card Question

  Hello people... last week, I got a desktop pc from a friend who walked away, Dimension 2400 desktop with Windows XP Home Edition. I plan on upgrading it and either sell it or it give. Last night, I ordered a titled graphics card "ATI Radeon 9250 card 256 MB DDR PCI"... which, after purchasing, I discovered via google and other search engines it takes to 220W - 250W power... the power supply installed is 200W... fundamental question is: should I upgrade the PSU? ". Or 200 will do well. Thank you!!!

  Jimmy

  Dell Dimension 2400 desktop SPECS: Intel Celeron 2.40 GHz PCU; Hard drive 40 GB IDE WDC Caviar WD400BB-75JHC0; Optical drive DVD-ROM IDE; Installed Maxxed-Out @ 2Gb (2x1Gb) DDR1 memory;  Windows XP 32-bit Home Edition with COA & Code product key sticker

  Hello

  Welcome to the community

  Have you tested the video card? The computer works fine with the new card? In this configuration, I suggest to upgrade the power supply. You can get 250W or higher power. If the computer is on, you can wait for that stop at random. Let me know if you still need assistance.

  Kind regards

• DVD Rom does not work in the Dimension 2400

  I have a Dell Dimension 2400, operating on Windows XP service pack 3, him comes from the computer with a CD burner and I need to install a DVD player, so I bought a HL-DT-ST-DVD-Rom GDR8163B, I installed the DVD and the computer recognizes the DVD-ROM and device manager says it works fine.

  When I try to use the DVD to play DVDs or CDs, it starts to run, but slow, then after a few seconds it stops, if I go to my computer, the drive is there and if I click the icon it says insert the floppy, puppy little drive upward and then stops.

  I had also installed on this computer Sonic Record now Version 7, I removed that thought it might be in conflict, but no help.

  I tried the fix for WIndows to delete the upper and lower limits

  I was also told that the computer is old and she might need a firmware update or something?

  Can anyone help?

  Osprey, you reason the drive was bad, I went and picked up another drive today and it works great, thanks for all your help.

• Dimension 2400 CPU

  I damaged one of the pins on my Pentium processor in my Dimension 2400 trying to remove it & the heat sink (long story).  So can I upgrade the processor?  Registering online for my system says:

  Pentium 4 Prescott DT Pentium 4 David mill

  So I don't know exactly what all this means, but it has a heat sink aluminum great & no fan above.

  Should what CPU I replace with that will fit the power outlet?  I have to remove the radiator and use it again and if so, how?

  Thank you!

  Thermal compound facility:

  cs_setInnerHtml ('c video_652a921f-0473-4-18-a8ee-aa573a88a44a', ");

  Heatsink Installation:

  

• TOSHIBA Power Pack pack stopped working after 12 months

  Can't believe Toshiba power pack stopped working 12 months and 20 days after purchase.
  I bought the warranty 'extended', but it does not cover something external to the laptop.

  The unit itself is fine, but the Accessories pack must be less than this model (I've never had this problem with other laptops work).

  Cost was $ 110 to replace.

  Thanks Toshiba.

  Hello

  I agree with you, it's too expensive to buy a new one for $110. But the time for power supply operation 12 months is normal

• New HP 2011 x 20 '' LED monitor for old Dell Dimension 2400. necessary graphics card?

  My in-laws have an old Dell Dimension 2400 and the monitor exploded. I bought a new HP 2011 x 20 '' LED monitor. My WIRE went to set up, and he tells her that a HMDI graphics card is required.

  This is a pretty old computer. I think he might have as... 512 MB of RAM. Is there an inexpensive graphics card that will meet their needs?

  And besides, when they buy the graphics card, are there all the cables that they must reach a new monitor to an old computer?

  Thank you very much!

  Nice description of Dell:
  Video connector to 15 holes :-)
  
  Seems to be a VGA connector.
  
  From the description of the monitor:
  http://support.HP.com/us-en/document/c02643130
  There is an also vga connector, so you will have no problem to connect the two.
  
  No additional card is necessary, no other cable - just use the old vga cable.
  
  Your only problem might be the resolution:
  resolution 1600 x 900 set at the factory for the monitor.
  
  I don't know if you can set the resolution to Dell, you should test.
  
  Otherwise a 4:3 normal/old monitor would be better than this 'big screen' new.
  
  HTH
  C.
  
  P.S. the Dell printer documentation:
  http://support.Dell.com/support/eDOCS/systems/dim2400/

• Power pack 1 error (new installation windows server 2011)

  Hi all, Im having problems trying to install power pack 1 of windows home server 2011, there is a new configuration with all windows update at day and not being invited by update install any update. The microsoft Download Center, I was able to download the power pack 1 when I distance destop and try to install, I get "error installing memory is available to process this command.  3 TB of storage.

  Windows Home Server forums are here: http://social.microsoft.com/Forums/en-US/category/WindowsHomeServer/

• WHS Power Pack 3 not in Windows Update

  When I try to upgrade to Power Pack 3 for Windows Home Server 2011, it isn't here. There is only the updates for silverlight applications. Does anyone know why this is? I am connected to the internet.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• At the start, receiving the message "Primary Drive 1" not found on Dell Dimension 2400 desktop

  Original title: primary drive 1 not found

  I'm helping a senior Windows user with a problem on his desktop Dell Dimension 2400.  At the start, he gets the message "Primary Drive 1" not found.  Can someone point me in the right direction as to what measures to take next?

  THX,

  Mike T goes.

  Hi Mike t. in Virginia

  You can check out the following link and try the steps suggested by Samhrutha G, Support Engineer, December 3, 2010 and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/primary-hard-disk-drive-1-not-found/fa3e591f-daeb-47bf-8f6f-3238f9507b6a

  Hope this information helps.

• Windows Home Server 2003 - cannot install KB968349 (Power Pack 3)

  With Windows-Home-serer-2003, whenever I try to install Power Pack 3, I have the following message:
  The following upates wer not installed: Windows Server of the MCH PowerPack 3 (KB968349).
  Thank you or your help.

  Hi oldrourou,

  I want to tell you here.

  http://support.Microsoft.com/kb/968349

  Prerequisites

  To apply this update, you must have Windows Home Server Power Pack 2 installed. If you have a beta version or a release candidate of Windows Home Server Power Pack 3 is installed, you must uninstall these preliminary versions before you install this release of Windows Home Server Power Pack 3.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dell Dimension 2400 will not meet the key USB WIFI Netgear

  Dell Dimension 2400 Windows XP.

  Trying to get my old Dell back in action, but I ran into a problem. NO INTERNET.

  I have the WIFI in my house but I can't connect wirelessly with the desktop computer.

  I have a NetGear Wireless - N Dual Band, but dell WNDA3100 USB won't pick it up. The flash player is on, but it will not install the new software. It is said there was a problem and it probably won't work correctly.

  Any ideas? Thank you!

  first go to the device driver and uninstall everything dealing with netgear.

  also if it is listed in Add/Remove to uninstall and restart.

  https://www.Google.com/#q=NETGEAR+Wireless+n+dual+band+WNDA3100+USB+XP+installation+guide+and+software

  above is a search page with instructions for installing xp

  you have version 1 or 2?

  just a thought you have wireless zero config service started/automatic services?

  After all your updates should be installed which will disable the autorun, so that when you insert a usb key, nothing will happen until you go to my computer and click on the device to open it, this was done so that you would have a chance to scan a usb usb being one of the fastest ways to spread a virus If she had previously plugged into an infected pc.

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.

• I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP. I can move program Windows XP my laptop that is running windows 98?

  I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP.  I can move program Windows XP my laptop that is running windows 98?  I need to access or code # s to do this and if so, how I get supplied with the printer Dell reinstallation disks have not all codes on them?

  original title: reuse of windows xp

  I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP.  I can move program Windows XP my laptop that is running windows 98?  I need to access or code # s to do this and if so, how I get supplied with the printer Dell reinstallation disks have not all codes on them?

  No you can't. Given that it's a Dell and it came with Windows XP pre-installed, it's an OEM of Windows version.  The biggest drawback of an OEM version (at least in the USA) is that its license it permanently binds to the computer first it is installed on. He can never legally be moved to another computer, sold, or given to outside (except with the original computer). If the computer dies or is stolen, your license dies with him.

  And let me ask you as if you checked to make sure everything on the Dell is compatible with Windows 7, and there are Windows 7 drivers for all your hardware that requires it.

• My computer comes with two CDs/DVDs? Dimension 2400

  Need to know if my computer has a DVD as well as CD or can I get a driver for play it movies?

  Look on the front of the drawer where you insert the CD.  If the device is able to read or write DVDs, there's a "DVD" logo it.

  Or you can go to Dell for the Dimension 2400 and enter your Service tag by clicking on the link that says "enter a Service number.

• My external CD/DVD burner does not work with Dell Dimension 2400 XP

  I have a Dell Dimension 2400 desktop but the CD-ROM supplied with the PC is no longer works it is stock and does not open, this is the reason why I had to buy an external which has the Maxtor 6E040L0 pilot, he worked for a while but don't any more. It is listed in the Device Manager and indicates that the device is working correctly, it is also listed in my computer, in the tag properties indicates it works. What can I do? I am not informed PC and don't have the money to hire a technician. Please, I beg you! Help. Thank you.

  Jose

  Hi JoseCedeno,

  See the following troubleshooting article:

  http://support.Microsoft.com/kb/982116

  I hope this helps!