Dimensions of the OfficeJet 6100 with tray in use

Similar Questions

• XP 64 bit driver for the Officejet 6100

  Given that HP is not a driver for the Officejet 6100 on a Windows XP 64-bit system, is there an unsigned driver or a work around to get an Officejet 6100 to work on a Windows XP 64-bit operating system?

  I tried to use the work of 990c but that didn't work.

  Hi Keith61,

  As far as I know that there is no actual work around to install a printer on a system that is not supported. Installing 990c drivers should have given you the ability to print. Can try one of the methods below to see if you can get the 990c driver to work or you can upgrade to a newer operating system. Let me know what you find?

  USB

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your Officejet 6100 printer using this driver.

  Wireless

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  8. open the Printers folder

  9. right click on Officejet 6100 and then select Properties

  10. click on the Advanced tab

  11. click on the drop down arrow under pilot to change the 990c driver and then click ok to accept the new driver.

  Try printing on your printer Officejet 6100 using this driver. I would like to know if you have the same problem?

• dimension of the hierarchical attribute with Essbase Studio

  Hello world
  
  I need to load the product dimension that is organized in a parent-child relational table like this:
  (parent_code, member_code, member_alias, mark, consolidation, formula)
  
  Each product has a mark and I need to load brand as a dimension of the attribute. The thing is the brand isn't flat, but it has its own hierarchy. For the brand, I have another relational table, where the data are organized parent-child like this:
  (brand_parent, brand_child, brand_alias).
  
  I do this load with Essbase Studio but I know is not how to create the Product hierarchy in the cube schema in order to load the parent-child hierarchical attributes. Documentation and tutorials only show examples of dishes attributes. I thought of these two ways, but do not know if will work:
  
  hierarchy of case 1) product like this:
  
  Parent_code
  Member_code
  Brand_parent
  Brand_child
  Member_code
  
  hierarchy of case 2) product like this:
  
  Parent_code
  Member_code
  Brand_parent
  Brand
  Member_code
  
  Someone had to do this? How did you do?
  Any help will be much appreciated.
  
  Thank you
  Daniela

  Hello Daniela,
  Please see the following post. One of my colleagues ran into the same issue, and his post was answered in the post below.
  ESBase Studio question - how to set up the dim attribute?

  Thank you
  Daniel
  http://dvepm.com

• Cannot print with HP Officejet 6100 with the latest version of Firefox

  Because I got the latest version of Firefox, I can't print anything online. I use Windows 7.

  "If I type"Print-printer", I get a blank page."

  Not a hyphen, an underscore character to separate printing and the printer.

  printer printing_

  In addition, JS (JavaScript) files can be read and edited in a text like Notepad or Word program using Open with... . When editing to ensure that you save the files in plain text format. Must edit with Firefox closed.

• VDI connect to the virtual computer with multiple NICs, use wrong address

  Strange question, we are the double of a VM to autoguiding.  Each NIC is on a different network, and it works very well.  Except when you sign out of the VM with a zero client.  If both network adapters is enabled through the vsphere, zero client the client tries to connect to the virtual machine using a wrong address.  He will try to use the address 172.16.x.x, but the life of the virtual machine and is stored on 192.168.x.x network.  Is there a way to make the NETWORK on 192.168.x.x address network card that zero the client tries to connect?

  Using the network-> Advanced-> advanced-> tab connections maps and links, move the 192.168.x.x network adapter to the top of the list of connections.

  Linjo

• Connection printer OfficeJet 6100 wireless

  I don't know what else to try, and I'm hoping someone can help.  I am attemtping to connect the OfficeJet 6100 to my network using Netgear N600 Wireless Dual Band Router WNDR3400.  After the implementation of process several times and print pages "HP Network Configuration Page" and "The wireless network Test results", everything appears it should work, but isn't always.  I am able to print if my ultrabok (Acer Aspire S3, running Windows 7 Home Premium 64-bit) is connected through the USB port.  I would like to get this set up wireless so that I can also take advantage of the capabilities of the ePrint.  Please let me know if you need any additional information.

  The wireless network Test results

  Model: HP Officejet 6100 x

  "No problem found. Congratulations on the successful your printer wireless installation. »

  Diagnostic results

  >Wireless

  -Wireless on: PASS

  -Wiressless work: PASS

  -Signal quality: Excellent

  >Connectivity

  -Connected: PASS

  >Network

  - Find the network name (SSID): PASS

  -Other networks detected matching your network name (SSID): No.

  -Network detected: 5

  > Settings

  -The printer settings compatible with the wireless router settings: PASS

  -No filtering: PASS

  -Channel: 11

  -Security: PASS

  Current configuration

  -Name (SSID) of the network: xxxxxxxxx

  -Hardware (MAC) address: xxxxxxxxx

  -IP address: 192.168.1.4

  -Source configuration: DHCP

  -Mode communication: Infrastructure

  -Authentication type: WPA - PSK

  -Encryption: Auto (AES or TKIP)

  HP Network Configuration page

  General information

  Network status: ready

  Type of connection: Wireless

  Firmware revision: TQP1FN1146AR

  Hello MP4683

  We are at least getting somewhere HP has a troubleshooting article that help address the question of the printer offline.

  See if the above measures help solve your problem.

  "Printer is off-line" Message appears on the computer and the HP software does not print

• longer the officejet work optional paper tray with the officejet pro 8500 a 7410?

  I just bought a HP Officejet Pro 8500 has more. Can I use the papar second drawer of the Officejet 7410 with it?

  Hi tsemaya,

  No, the contacts are different for each unit.

• Officejet printers with 2nd undetected paper tray

  If you happen to run across the following problem with tray 2 not detected on your Officejet printers, try the following steps that should help solve the problem.

  (1) turn off the printer

  (2) pull tray 2 completely out.

  (2) turn on the printer without 2nd tray

  (3) turn off the printer

  (4) install 2nd tray

  (5) turn on the printer

  Try the steps I provided below and let me know if this worked for you. My current setup for premium 8600 goes like this.

  The PC printing: tray 2 is set as default Type on paper: plain paper

  Copy of the printer: tray 2 is set as default Type on paper: plain paper.

  Tray 1 contains photo paper, tray 2 contains plain paper.

  This way when I print from the PC it always pull out tray 2 unless I select manually 1 tray to print photos. The same for Copies, when I make a copy he always starting from tray 2, unless I manually select to pull from Tray 1.

  Tray 2 as the default value for the copy configuration steps

  1. press on copy

  2. tap on settings

  3 change the Type of paper in paper-regular

  4 change Select tray 2 tray

  5 scroll and select set as new default.

  Press home to return to the home screen. Press copy, tap Settings and check if Select tray is always tray 2. The current version of the firmware on my printer is CLP1CA1136AR. You can check your firmware version by printing the printer status page in the Setup Menu.

  Let me know if it worked.

  Binary_Zen (an employee of HP)

  Click the White Star of Kudos to say thank you
  Please check accept as Solution if it solves your problem

• HP Officejet 6100 cut the top of the page when printing

  I use a printer HP Officejet 6100 with Windows 8.  Sometimes the printer has trouble grasping the page to print. Printing starts at the top of the page - cut on top of what is being printed. Does not happen all the time, but often I have to reprint for a picture with appropriate boundaries. It's printin 4 photos per page.

  Hello Jlove25,

  Welcome to the Forums of HP Support!

  When the Officejet 6100 struggled to pick up the papers, it is another type of paper that when he goes to pick it up? "The cleaning rollers would be my first suggestion, this guide will show you the rollers to clean: a ' Out of Paper ' Error Message on the computer and the printer is not Pick Up or paper feed.

  I would like to know if the cleaning help rolls the printer print on a more consistent basis for you.

• OfficeJet 6100 Wireless: default print to hp officejet 6100

  I have an officejet 6100 on a WiFi network with a computer using Windows 7 and the other stuck with Windows 8.1.  On the Windows 7 machine, I can set the default value of printing from the choice of the printer control panel.   It is Only/Draft of black ink, and the settings are retained.  The other machine is Windows 8.  When we the printer (Control Panel) on the setting of the aboves, they returned to a stop settings / Normal grayscale.  This means that everything is printed in color and not the project unless we do not forget to change the settings before printing. How can I get the settings Windows 8.1 by default Black Ink Only/Draft machine?

  On the Windows 8 machine follow these steps: in Control Panel click devices and printers.  Right-click on the Officejet 6100 series and select Printing Preferences.  Click the paper/quality tab, select quick print of project quality, apply.  Then click on the tab color and check printing in grayscale and check the Black Cartridge Print selection only, apply.  Now you can also make a new print task Quick Set, type something like project - black only, Save, OK.

  At this point, the default should be project with black only.  Note that some programs may keep their default values.

• you're wondering what that the autonomy of series Watch 2 using GPS?

  Plans to buy the new series 2 shows that there are now GPS. I wonder what will be the battery life while using the GPS when I am running?

  Hello

  Battery life varies depending on use and other factors.

  During tests, for example, Apple has reached 18 hours of battery life with the next use: 90 time checks, 90 notifications, 45 minutes of usage of the app and a workout of 30 minutes with Apple Watch Bluetooth music playback.

  Y using the application of the training session with and without using the built-in - GPS function examples are available here:

  • http://www.Apple.com/watch/battery.html

• Connection Officejet 6100 to Wifi with the Mavericks

  I have Mac OS 10.9.2 (Mavericks) and have installed all available updates.  I just bought a HP Officejet 6100.  The configuration software supplied with the printer does not work on the Mavericks.  I can use the printer via USB, but have no idea how to do to connect the printer to my wifi network.  All the instructions I found point using the diskette supplied with the printer (not compatible with the Mavericks) or assume that I already connected the printer to my network wifi (which is the problem that I am trying to solve).

  I had HP products in the past and if it is connected to the network, but it supports WPS and has a touchscreen user interface.  This printer does not seem to be supported.  The wifi light just keeps blinking.

  I don't like on ePrint, etc..  I want just the printer connected to my wifi so I can print from any number of computers on this network.

  Help, please.

  Thank you

  It wasn't very nice, that we were just trying to help.  Don't tell you specifically that your router has WPS.

  On your printer, press and hold the button wireless for 3 seconds.  Within 2 minutes, press the the router WPS button.

  Wait about 2 minutes. If the printer connect successfully, the wireless light will stop blinking but stays on.

  From there, you can connect your printer on your Mac:

  -Go to System Preferences > print & Scan
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• OfficeJet 8100: New HP Officejet 8100 recognize tray 2, but keeps saying no paper in the tray

  I just got an officejet 8100 with a second tray and the driver recognizes that there is a tray 2. I have regular bar State, but when I print to tray 2 paper, I get a message "on paper." There is nothing of blocking the tray that I see. I have reset the printer, checked for jams, etc., but I still receive the message.

  Hey there pcforms!

  It seems that the tray is not for the Officejet all after 8100, which is probably the cause of the problems. I checked the HP parts Surfer website to find the information that you will need for the second ferry that will be compatible with your printer. You can order the part on the website or contact HP directly. I'll leave the details of HP below for you. If after you have the correct bin and you're still having problems, let me know and I'll do my best to help.

  SURF PARTS: HP OFFICEJET PRO 8100 X - N811A/N811D

  Reference number for the 2nd tray (second tray): CQ696-60010

  Click on the "Accept as Solution" If the issue reached a resolution! Hit the thumbs up below to love my post or show thank you for giving me a helping hand!

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• OfficeJet 6100 x (H611a) will not be re - connect to the eprint Server

  My printer HP Officejet 6100 (H611a) has been connected to the server eprint for over a year.  A few days ago when I tried to print from my tablet, he told me that I was no longer connected to the server.

  When I went to the page of the built-in web server, it showed that I had lost the connection and was an icon that says 'fix it '.  I tried the reconnection to the server by clicking on this icon for several days without success.  He would say "unable to connect to the server.

  Finally, I tried to cancel the registration of the printer and tried to start over.  Now whenever I try to save the printer it says "unable to connect to the server.

  I tried this for about two weeks, without success.  Any help would be greatly appricated.

  Hi scthom,

  Welcome to the Forums of HP's Support.  I understand that you get a connection error message when you try to connect to the web services of HP to use ePrint.

  My feeling is that there was an update to your router or modem firmware and this update is causing the printer to communicate with HP.  Please define Manual of the printer an IP address manually and DNS servers.  I've included a link to another post with measures, including screenshots, of how to do it.  Don't worry that the screenshots are for an Officejet 8600 the steps are the same.

  Please let me know how it goes.

• Printer HP Officejet 6100; Win 7; Access the ink cartridges

  Printer HP Officejet 6100; Win 7;  If the ink cartridge access door is opened with the printer, the cartridge printheads do not change access.  No error reported.

  Well, couple of questions:

  First, they move with the door closed while printing, I want to say it actually prints, which would indicate that the transport is not stuck on the side? If it does not move, it may be blocked behind the paper or something inside the printer. It is not recommended to reach into the printer.

  Second, is there an indication (light/message) which shows the door is actually open? Otherwise, there is a tab inside the right side of the door near the label to ink cartridge number? It is located on the edge of the door, and goes into the printer indicating open or closed to the printer.

  If all this seems correct, try a hard reset on the printer. Powered on, unplug the power cord of the printer, wait at least 30 seconds, then plug the power supply cord. Turn on the printer and see if it will allow access to the cartridges.