DIMM ERR appears in the system BIOS System Information

Similar Questions

• My WD external HARD disk usb device does not appear in the computer on XP and Win7, but appears in the system tray?

  I have 2 GB external usb external hard drive that appears in the XP and Win7 system tray, but not in my computer/workstation?

  When I go to the management of computer disk/storage/management - is not there in XP but it is for Win7.

  How to work various PC and diferent OS?

  If you view the contents of the external drive, I think that the first folder contains a USB driver that you need to install to run properly, if you cannot view the contents of drive I'm sure you can download the driver for Western Digital. I think that the work of readers well on Windows 7 installs with 3 USB ports, but drivers are needed for USB 2.

• How can I completely stop the LAN icon appear in the system tray >

  I used the function customize icon and click always hide > apply > OK.  It works up until I got disabling my computer.  The next time it is turned on, the LAN icon is back in the system tray.

  Sure Editbabe

  Click lan icon open

  Go to the properties

  the icon tick of the United Nations on space forms when connected

  hope this solves the problem

  Best regards and good luck

  Sohail Khan A professional network hardware

• Sound does not work on the computer and the volume icon does not appear in the system tray.

  Original title: my sound icon has disappeared from the taskbar.  The Control Panel indicates the sound is on, but I can't hear anything.  What happened and how do I get my sound back?

  Have a Toshiba laptop that always displays the lower icon audio in the right hand of the screen.  The sound icon has disappeared and I can't hear anything.  I check Contol Panel and sound, and he says it works and is turned up... but I can't hear a thing.  How can we retrieve icon of audio and how I can hear sound?

  Hello

  Thank you for your response.
  I did a "System Restore" and the icon reappeared, and the sound now works.
  I restarted the computer a couple of times, but that does not solve the problem.  Also, I went into the Panel and checked to see if the speakers were working and were lit, and they were.
  It wasn't until I did the restore of the system that the icon reappeared and the noise began to work again.
  Thank you.

• Volume contorl icon does not appear on the system tray.

  Original title: Volume control

  My volume button has disappeared from the lower toolbar.  I can't find where the volume can be controlled.  Any ideas?

  My volume button has disappeared from the lower toolbar.  I can't find where the volume can be controlled.  Any ideas?

  Hello

  You can access the Volume control of the following location: %SystemRoot%\System32\SndVol.exe
  Are you really sure that it is not visible in the status bar? Please, try the following methods and check if that helps
  [1] method: Using the properties of the taskbar to configure the system icons
  • Right-click on the taskbar and select Properties
  • From the top, select the Area of Notification tab
  • Make sure the Volume is checked under system icons

  Screenshot: http://maximumpcguides.com/wp-content/uploads/2006/12/2vista_taskbar_properties.PNG
  [2] method: Using the registry editor to reset system icons
  ATTENTION: It is recommended to create a System Restore Point or a backup of the registry before proceeding
  • In the start menu, search for: regedit
  • Right-click regedit and select run as administrator
  • In the right pane, navigate to the following key HKEY_CURRENT_USER Settings\
    Software\Microsoft\Windows\CurrentVersion
  • Delete the following key under Windows\CurrentVersion: TrayNotify

  
  

  Screenshot: http://www.wincom7.com/blog/wp-content/uploads/2012/05/registry-entry-image1-625x316.jpg

  If the above could not show you the Volume control, please try the following
  Method [3]: Creating a new user account
  Made from Microsoft Windows
  • Open a user account by clicking on the button start , clicking Control Panel, clicking user accounts and family safety, and then clicking user accounts.

  • Click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  • Click on create a new account.

  • Type the name you want to assign to the user account, click an account type, and then click on create an account.

  Thank you
  I hope this helps :)

• I installed 4 GB of RAM in my computer Windows XP which has detected correctly 4096 MB, but the system information that 2 GB of Ram available.

  I recently installed a maximum of 4 GB of RAM for my Win XP Home computer: four tips of 1024Mo in 4 available memory locations. Story: It came with 512 MB of RAM (256 MB two cards to 2 of the 4 slots). I sometimes treat files large image or video in a few applications, and if I do too much without saving the files, I get something like "...". not enough memory to complete... "and can not save either and lose an hour or two of work, all frozen, treatment and once had to turn off the computer by pulling the power plug (nothing else worked). Later, I added two boards of 1024 MB and moved the two 256 MB for the other two locations. The computer has detected correctly the RAM and showed 2,560.00 of available physical memory total MB of RAM in system information and available physical memory 2.00 GB (currently about 550 MB, current process). I put 4 GB page file. That helped a lot with the processing of these applications, but if do not attention, the same "...". not enough memory... "thing and I lost the job. So I added another 2 identical cards of 1 GB replacing the two planks of 256 MB. The 4 GB of RAM, I've added exact IS correct type for my computer. Set the pagefile to 1.5 times RAM available, etc, so that's it of OK. NOW THE PROBLEM, if it'S a PROBLEM: in the information system RAM is detected OK, showing 4,096.00 MB total physical memory, BUT not much more available memory: 2.16 GB available physical memory! Total virtual memory 2.00 GB remains the same in both cases, even if I put the pagefile of 12 GB. Page file space shows what I put in more added about 2 GB.
  SO THE QUESTION: Is all the 4 GB of RAM (essentially) available for use with my operations high megabytes to image and video processing applications?  Or is Win XP steal my RAM and makes the page file? What happens here? You wish to know if I've lost $120,00 on two more strips of 1 GB of memory. Thanks loads, if someone can tell me.
  Did not have a pretty good test in image/video applications to find out if I won anything yet. Always the same 550MO ongoing process. And Yes, I spent hours on the things in forums of online learning on the page file and RAM, most of which I knew already, but there is no explanation on the information system does not more than 2 GB of RAM available.
  Thanks loads, if someone can tell me.

  "My OS is Windows XP family 32-bit." End of the story for the possibility to use up to 4 GB of RAM. No, there is no way to magic, you can force a Windows 32-bit operating system to use all 4 GB of RAM. There is a difference between the question of whether a motherboard will support a certain amount of memory and an operating system be able to access memory. Sorry, you missed this fact in your research. Oh, and if you want to try one of the many Linux distros do not forget to use a 64-bit - after checking your processor is 64-bit also. That yours is not.
  MS - MVP - Elephant Boy computers - don't panic!

• How can I change the system information

  I inherited a computer for my daughter in law with XP Home OS on it. Can I change the operating system information easily?

  If you mean 'Owner' and this information, Yes

  However, what you need to do as far as the account (username) is conerned, it is create a new account in any name you want, and then delete the old - go to control panel, user accounts.

  This avoids difficulties alter on if you siply change the username in use.

  After the back if you want more details on how to change the 'holder' (that long because I did, I forgot!)

• Information of the logged-on user does not appear after the user updates their information

  I created 2 pages. Page 1 has a recordset that only displays the users username and password, I made a filter on the recordset as username = var = MM_Username session. When he clicks on update, which is just a link to page 2, they go to page 2 which has a Recordset which filters their modules in the same way and allows them to update their username and password. I used a behavior to update this page as well. Thus, when the user updates their information it modifies the database information and works very well.

  The problem: when the user returns to the page 1 to see their update of username and the password that they have just updated, it is EMPTY. No info displays on the screen, even when I refresh the page. There if MM_Username var isn't refreshing while connected. Because when the user disconnects and connects, it displays new user name and password on page 1.

  It DOES not work when I take the filter out of the 1 Recordset page, but that doesn't make me all good b/c the user must of course only to see their information.

  I'm under DW CS3, php and mysql.

  Help, please! Thank you.

  I know a little php and takes care of everything.

  Great, because this will save my gibberish long habit ;-)

  I m attaching a screenshot of the login page updated the PHP code, which has only three new lines to take custody of.

  Line 1: Add the primary key to the 'users' table to the query

  Line 2: Add function mysql_fetch_row whose resource is the existing variable in $LoginRS

  Line 3: Add the Session Variable MM_user_id and assign the $row variable [0] (see line 2).

  Well, that s, and on other pages, you can define a query such as...

  "SELECT username, password FROM users WHERE id" is equal to the Session Variable MM_user_id

• Why Muse does not once (Proxima Nova) when the other versions are installed on my computer? The police also does not appear in the system fonts.

  Hello

  I want to use web fonts Proxima Nova (as woff) in Adobe muse on my site. These fonts are on my computer.

  The otf and ttf files are also installed on my computer, but they do not appear as sytem fonts in Muse.

  When I try to add the web fonts for Muse, it gives an error.

  
  Can someone tell me how I can get Proxima Nova as a system font in Muse?

  Thank you!

  In the version of June of Muse CC 2015 Typekit fonts have been integrated into the Adobe's Muse.

  Please try following steps to add them to your list of Web fonts.

  1. go into file > add/remove both

  2. Select the tab for typekit and "Proxima Nova" police search

  

  3. Select all, and then click OK

  4. these fonts will be added to the list of Web fonts.

  

  You can also check out the link below which has documentation for the same thing.

  https://helpx.Adobe.com/Muse/using/Typekit-Web-fonts.html

  Concerning

  Vivek

• problem on Windows vista 32-bit: blue screen appears and the system reboots automatically when you work

  signature of the problem:

  problem event name: bluescreen

  OS version:6.0.6001.2.1.0.786.3

  Locale ID: 16393

  More information about the problem:

  BCCode:10000008e

  BCP1:C0000005

  BCP2:94B525C6

  BCP3:9BA92C14

  Product information

  Product number: NC646AA

  Series No.:CNX9030FZ9

  HP Pavilion Slimline s3560in desktop PC

  Hi mkm.

  Were there any hardware or software changes made at the time the blue screen appeared?

  I suggest to close the PC and remove all devices in addition to the screen, the keyboard and the mouse.

  If the computer works without a blue screen for a reasonable period of time, you can start to add them one at a time to see if a specific device that is causing the error back.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A ball occasionally appears on the system tray which reads: "the preliminary version of Windows Vista will expire in 5 days. Save all the files... »

  Dell's tech found a virus on the computer that has been deleted. Thought that this solves the problem, but even after the virus has been removed, the message reappeared. It does not show every day, but sometimes and counting down the days of the expiration.

  What is the problem?

  Hi lugnuts.

  You experience this problem, because you have installed the beta version of Windows Vista Service pack 1 (SP1) on the computer.

  Before coming to the evaluation license expiry date, you must uninstall the Windows Vista SP1 update package.

  To uninstall Windows Vista SP1 update package, follow these steps:

  1. click on start and then click Control Panel.

  2. click on programs.

  3. click on programs and features.

  4. click on view installed updates.

  5. click on Service Pack for Microsoft Windows (KB936330).

  6. click on uninstall.

  Reference:

  You receive a message when you are running Windows Vista with a version beta of Service Pack 1: "your Windows license will expire.

  http://support.Microsoft.com/kb/954753

  For more information about how to uninstall Windows Vista Service Pack 1, click the number below to view the article in the Microsoft Knowledge Base:

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537/

  Once the beta of Windows Vista Service pack 1 (SP1) is uninstalled from the computer

  You can install the final version of windows vista service pack 1 on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  What you need to know before you install Service Pack 1

  http://support.Microsoft.com/kb/936330

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Unfortunately, the content delivery Service has stopped" appears when I start the system.

  Dear friends,

  I use Thinkpad Tablet. Since the day bf yesterday, this message appears when the system startup is almost finished. Someone knows how is it? Thank you!

  I solved this problem by the method in the post
  forums.Lenovo.com/T5/ThinkPad-Slate-Tablets/quot-Unfortunately-Content-Delivery-Service-Has-Stopped-quot/TD-p/897731.

• Event 45, volmgr. Windows 7 x 64 SP1. "The system could not sucessfully load the crash dump driver."

  The crash dump driver fails to load at startup.  When the system crash it does not blue screen and reboots the system.  I want to get it going so I can read the crashdump...

  There is a fix out there for pre Windows Vista SP1 that appears very relavent but will not be installed (by his design of the correction).

  Details below...

  Log name: System
  Source: volmgr
  Date: 18/05/2011 08:54:37
  Event ID: 45
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Cryogen
  Description:
  The system could not sucessfully load the crash dump driver.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      45
      2
      0
      0 x 80000000000000
     
      39071
      System
      Cryogen
     
   
   
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C003200000BB0000C000000000000000000000000000000000
   
  

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the CRYOGEN system
  System manufacturer system manufacturer
  System product name model system
  System Type x 64-based PC
  Processor Intel (r) Core i7 970 at 3.20 GHz, 3201 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date American Megatrends Inc. 1301, 16/11/2010
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Cryogen\Charles user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 24.0 GB
  24.0 GB total physical memory
  18.1 GB available physical memory
  48.0 GB total virtual memory
  41.8 GB available virtual memory
  Page file space 24.0 GB
  File E:\pagefile.sys

  Drop the question above actually lead to what may be a solution... The fix for Windows Vista pre SP1 fixes an issue with the (cloned) dynamic disks used to store the paging file.  I have two drives on the clone (E:\) which the system information noticed the location of the swap file.  I put the pagefile drive to C:\ in the event where it was the same problem, such as reported in the hotfix, but it has not fixed the problem...  So I assumed that this fix has been exceeded and a coincidence. But the information system showed the swapfile E:\, my dynamic disks...

  What has removed the error is "double adjustment" the return to C:\ drive.  Apparently once is not enough.  I put the pagefile on C:\ managed and rebooted system.  Then I noticed the mistake of volmgr came from miroir3 (second player in E:\) still info system showed the swapfile on C:\.   Weird indeed.  I went and be given the C:\ drive as the system swap drive to managed by activation/deactivation/Executive every car out of the current value, and then back to the desired direction.  After having done that and restart once more the error no longer appears in the event viewer at startup.

  The only thing worse than a BSOD, no BSOD.

• How to repair FCPX 4 K edition freezes the system

  PLEAS HELP!

  Only when 4 K editing until the addition of transition, red square pixels appear throughout the system and the screen freezes. Now, whenever I try to edit it, it does the same thing.

  Restart the system and all the programs work well, even to save the system for more than 10 hours without problem. As long as I'm not in FCPX. It seems to be a problem of overflow REM edition 4K. Technical support advised to hold command + Option + P + R to reset NVREM. It did not help.

  Someone please help! I'm almost done with my slide show of 4K 2 hours, but can not continue to finish.

  I thank very you much in advance!

  What are the specifications of your computer? What resolution are your slides?

  Russ

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation