direct error

Similar Questions

• Direct error in dxdiag

  I discovered while playing online, the Doom3, that when I close my PC a direct X file called system.dll was missing but I looked under this file it see, Doom 3 has been ptached to version 1.3.1

  I had some mods, I installed Microsoft Sliverlight, installed then removed Gametap. I got when first had directX9c PC even update.

  I could post a diag here if you like, I just want to make sure that it is not something bad picked up in this online game.

  Even a scan disk errors.

  Last good known backwards compatibility mode.

  Tried to installed direct X game same cd updated again.

  Help me: robotindifferent::smileyindifferent:

  My Dell Dimension 3100 features.

  Windows XP sp2

  512 MB of ram

  PNY nvidia 6200 256 MB pci added with pilot 81.95 whql no errors when I installed this before.

  Message edited by electromagnetic on 02/02/2008 01:49
  
  

• Windows live movie maker error 0 x 80070002 when you save a file it tells me files are missing. Help!

  Help.  When save/replace a file, I receive direct error 0 x 80070002 and said to find all the missing files or unstable files in my project and try again.  What are the files?

  Your problem belongs to Windows live Solution Center.
  Repost of Movie Maker Forums - son Movie maker section:

  http://windowslivehelp.com/forums.aspx?ProductID=5

• UNI-DIRECTIONAL normal/aggressive with several neighbors

  Hello

  We lack 4 c4500 switches to 2 sites linked together through the layer 2 cryptographic boxes and VPLS in a point-to-multipoint configuration which is completely transparent (it's more or less like connecting them via a Hub - each switch sees the other 3 as neighbours).

  Our basic configs have Uni-directional globally active in aggressive mode.

  I wanted to only disable interfaces (routed ports) to crypto boxes, because I don't want their ErrDisabled for 5 minutes if there is connectivity problems in the VPLS-cloud (each switch also had 3 UNI-DIRECTIONAL due to the P2MP configuration neighbors).

  Mode config-if I could do it simply with 'disable the port Uni-Directional', but I thougt it would be better (not aggressive) normal mode execution for the chance to use UNI-DIRECTIONAL-show commands. So, I have configured 'Uni-directional port' for the affected interfaces.

  interface GigabitEthernet1/2

  Uni-directional port

  !

  Parts of the show command:

  ! P2MP port to crypto-box

  Interface item in gi1/2

  Port enable the administrative configuration setting: enabled

  Port enable operational state: enabled

  (...)

  ! standard port with the default configuration

  Gi2/1 interface

  Port enable the setting of administrative configuration: default of the unit follows

  Port enable operational state: active / aggressive mode

  (...)

  I was very surprised to discover that a single interface will still in State of ErrDisable after discovering an error UNI-DIRECTIONAL:

  % UNI-DIRECTIONAL-4-UDLD_PORT_DISABLED: UNI-DIRECTIONAL disabled interface item in gi1/2, detected one-way binding

  % Of PM-4-ERR_DISABLE: Uni-directional error detected on item in gi1/2, by putting the gi1/2 item in condition of err - disable

  Now, I'm stumped: have I misunderstood the difference between normal and aggressive mode? Or something wrong with my setup?

  IOS version: 12.2 (54) SG

  Thank you

  Rolf

  What I don't understand is why it ends up in errdisable state when it's configured in normal mode.

  You have configured UNI-DIRECTIONAL on BOTH sides right?

  If the answer is Yes, then I recommend that you enable the record link "enable connection logging" on the interface to determine if you have a potential problem with this link.

  Furthermore, this link is the fiber optic, no?

  If this is not the case, UNI-DIRECTIONAL is good if you have fiber.  I would recommend not UNI-DIRECTIONAL on a link of copper.

• Display of messages FacesContext top of page

  Hi all
  
  I use jdev 11.1.16.0. I want to display FacesContext messages as text output at the top of the page, but I'm able to display these messages pop up. I tried with < af:message / > tag still there is view as popup. Here's the code I used.
  
  FCX FacesContext = FacesContext.getCurrentInstance ();
  FacesMessage msg = new FacesMessage ("Enter comments");
  fcx.addMessage (null, msg);
  Returns a null value.

  Hello

  affecting true property inline on af:messages tag should show direct error messages on the page rather than displayed in popup.

  Sample:

  Jean Lou

• Make a dimbuild prior to loading - all of FDM

  Greetings,
  
  We are doing loads of data using FDM. The problem arises when there are new accounts in the data file. Fail to load, and it must be manually added to the database, and then run the load again.
  
  Is it possible to run a build dim where for each new Member of this dimension, I have FDM add it to a specific hierarchy within the dimension? So if ABC Member new and not yet in the database, the dimbuild will add it to the database, then once done, do a load.
  
  I can't simply the functionatlity of construction dim Essbase because the specific dimension, I need to do that against contains a mapping in the FDM...
  
  We are on 11.1.1.4
  
  Thank you very much.

  Hi, QC

  What kind of mapping is done? I ask that my first reaction is ' what checks do you the Member to be added is a valid member?

  To my knowledge there is no standard features of FDM delivered to do this (not sure if there are via ERPi as I haven't used). However the flexibility of FDM Screenwriting I would have thought that you could do something to make it work.

  Things to consider:
  1. it is possible in scripts VB FDM to shell out and launch a .bat file, i.e. gives the possibility to launch a MaxL script to build Essbase dim

  2 FDM would not wait for a return code of this process, then you need to generate in some sort of loop mechanism in your script

  3 mapping is completed during the import step (although if loading manually rather than batch then should not be derived when importing the target member, you have the chance to add an explicit mapping to step validate), carefully consider where where scripts, you must add your code, the FDM API guide will help with the event firing order

  Down another track, I know that you do not want to reload the entire file, but you can still:
  1. launch the load
  2. use the error log to find new members and make the Sun build Essbase
  3 re - load on the Chronogram of the direct error log to Essbase

  However, this second option break some of the audit trail provides the FDM so not ideal.

  Hope this helps
  Stuart

• 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand

  When I try to go to my site, I get a blank screen and this message:

  Method not implemented

  GET to / not supported.

  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.

  Can someone help me fix this bug, please? Thank you!

  This problem may be caused by corrupted cookies or cookies that are blocked (check the permissions on the subject: permissions page).

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Please upgrade to the current version of Firefox 30.

  • Firefox > topic

  The version of Firefox you are currently running is no longer supported with security updates.

  • It is important to update Firefox and Add-ons to the latest version to get all security patches.

  You can find the full version of the current version of Firefox 30.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• Executable VI generating an error 222 on Keithley 2612 although his run correctly when starting labview 2009 directly

  Hi all

  I have a VI that works perfectly and I can control, a 2612 Keithley has for measurements of transistor.

  The VI run well when I realize it from the computer that has the Labview 2009 (XP OS) platform

  Equipment (IE Keithley 2612 A) is related to another computer that is not labview 2009.

  I installed the Run-time-engine 2009 (32-bit XP OS) on this computer.

  Then, I create an executable of my VI with the option 'build application.

  The executable VI starts normally on the computer, but when I run it, I get an error message from the Keithley 2612 (which wasn't the case when I ran the VI directly from the computer haing LabVIEW 2009 installed on it). The error message is 222 (ie the long parameter)

  I thought I did something wrong and I create an executable from an original VI of Keithley (IE without modification). I get the same error message.

  When I create an executable with the runtime engine 2009 included (because it is possible to do with LB 2009), I am geeting the same error message.

  So I need to check step after step, when the message arrives but

  Someone knows something about such a question?

  Thank you

  Hi all

  Just for those who might experience a similar problem.

  I found the solution after fighting all the possibilities.

  The source of the problem was (for some reason) that the country setting of the computer was wrong

  and decimals are written with one, instead of a point.

  As I correctly reset the country setting, stand-alone files work normally.

  Best regards

  Youki

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Cannot load games 'Titanic', 'Travel' - no message just a flicker on the screen, then the game stops. On "Death on the nile" error - latest version of directx. On 'Peril at End House' error - last need direct 3d.

  I have win7, Windows Home premium 64-bit on an HP Pavilion Elite I - 7 core intel and Gateway screen (fx2300). After the last update for windows and ATI, I had problems to read my games - some don't is not loading, some give me access violations, others do not go full-screen. Oh, now I can no longer adjust the resolution of my screen for anything other than the highest or lowest values acceptable (everthing in between is blocked).  I have supported the ATI update several times, but it takes to watch TV in hd. I worked with HP to install and reinstall the ATI update and update of the last window. Whenever errors are different on my games. Initially, they were access violations and some games would not work, I have the update and reinstall it and other games would get the access violation? Now I can't load games 'Titanic', 'Travel', 'Nancy Drew - lights camera curses'. -No message, just a flickering on the screen, then the game ends. On "Death on the nile" error - latest version of directx. On 'Peril at End House' error - last need direct 3d. I have directx 11. All my games worked at the beginning of April. .  I have directx 11.

  First thing to do would be to check the compatibility of the individual games that you are trying to play the Windows 7 Compatibility Center.

  Here is the link:

  https://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Then, DO NOT ever update the drivers through Windows Update. Always install the drivers from the manufacturer's website.

  Is your Windows 7 install an upgrade of Windows Vista?

  Titanic, travel, etc. - are these games, bigfish, BTW?

  If so, contact them.

  I feel ultimately that your user account may have got corrupted somehow.

  Create a new user account and check if you can play the games there.

  If so, fix the damaged user account.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• Error code 80072EE2 - Windows update searches for proxy while the Internet is directly (64-bit windows 7)

  Windows Update error code 80072EE2. Update Windows Journal shows he's looking for a proxy in spite that the intenet access is direct. How can I find out Windows Update that I don't use any proxy? Proxycfg would probably help, but there are more with Windows 7.

  Thanks to anyone who can help!

  French Old Timer,
  In addition to the information requested by PA Bear, take a look at this article and let us know if it helps.

  You may encounter temporary connection related errors

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• Error: "cannot open Volume for Direct access" is displayed when Chkdsk runs at startup

  Original title: Edit/Fix key in my registry

  CHKDSK keeps trying to run during startup, but "cannot open volume...". "If I can solve this problem, I want to put it in the manual, not automatic.      My registry key: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\rchelp is missing.   Can I remedy this by creating a text file with an REG extension and if so, where can I find the exact measurements to do?  It is the DOS Cmd or in Notepad?

  Hi BarneyBear,

  1 did you allow that chkdsk runs successfully at the start of the system?

  Editing registry is not necessary here. We recommend you to check if the disk check is scheduled.

  This problem can be solved by installing the latest service pack Windows XP.
  See the error message "Impossible open Volume for Direct access" When Chkdsk runs at startup

  See also, Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error No.: test result sound 0x80072EFF__Direct fail step 3 (create direct sound) __0x88780078 no driver

  Error no 0x80072EFF

  Test result fail step 3 direct sound create 0 x 88780078 no driver

  Error no 0x80072EFF

  Test result fail step 3 direct sound create 0 x 88780078 no driver

  go to your sound website and download the latest version of the driver.

  can help.

• Windows Update error Code 800F0219 with the creative camera direct

  Original title: Code 800F0219

  This update has to do with Creative direct from the camera and the complete error code is: Creative Technology Ltd. - Streaming Media and Broadcast - Creative Live! Camera

  Download size: 285 KB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  Creative Technology Ltd. Streaming Media and broadcast software update released in August 2009

  More information:

  http://winqual.Microsoft.com/support/?DriverID=20293226

  Help and Support:

  http://support.Microsoft.com/select/?target=hub

  In addition, there was a mistake with the number 643: Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2742597)
  Download size: 15.3 MB
  You may have to restart your computer for this update is taken into account.
  Update type: Important
  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
  More information:
  http://go.Microsoft.com/fwlink/?LinkId=261907
  Help and Support:
  http://support.Microsoft.com

  Hello Arnold,.

  Thanks for posting your query in Microsoft Community.

  According to the description, you are facing problems with installation of update for Live Creative Camera and receive error code 800F0219.

  In order to quickly provide a solution, please answer these questions:

  1. is the issue with this particular update?

  2. What is the full error message?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest following the steps listed in the article and check if it works.

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Method 2: I suggest to perform the clean boot and then try to install the update.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.