Direct Login mode with CAT OS using Ganymede +.

Similar Questions

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• Pavilion G6: Login limited with Win8.1 using Pavilion G6 but not another PC on network

  I looked through several positions but can't find one that is same situation or the solution worked.

  My situation:

  • Windows 8.1
  • Connect to the DLink wireless router
  • Using something called ISP of Communications to wide band Mediatti (for the military in Okinawa)
  • All other devices in the House connects to the internet just fine
  • The HP in question connects to the router
  • It can ping the router and other computers on the router
  • It can connect to other computers and view the content
  • It can not connect or ping to the internet (ping google.com)
  • It cannot connect to the router (http://dlinklocal.local) (cannot display page)
  • It will connect when I do a system restore
  • It will usually connect for a few days, or even weeks, and then it will stop working
  • deactivation and reactivation of the connection do not work.
  • All the problems are the same, whether it is connected via WiFi or CAT-5

  I think that it is at least sufficient to get people started. I am totally frustrated and really want to throw the thing out the window and buy a Mac. (Just kidding--perhaps.) It has other problems, as I speak on this subject. For example, if you restart the computer, the WiFi doesn't. You must close it and start normally. What else... If you have anything else that a mouse - like saying an external drive or a card CAC reader, the computer will not start. If you update the driver, it won't work anymore. At low levels of light, the screen flashes. If you try to start a video on the internet or music on a music player, it takes several minutes to start. Etc. not very happy.

  In any case, thanks for your suggestions.

  Todd O'Brien

  @PavillionG6User ,

  Hello and thanks for the display on the HP support forums.  So, thank you for providing great information.

  What you have is a problem with your router.

  If you can connect and ping then the hardware works correctly.  Everything on the outside which belongs to the router or modem for the control connection.

  I have dealt with the same question to the House and found the type of router I was using not will give me a speed the internet as more than 3 devices when connected and stream.

  as soon as I got my brother-in-law to connect with his Ipad and phone to the router then boom my laptop will no longer go on the internet.  I can ping other devices without problem.

  Try to update the firmware on the router or modem.

  Here is a link to check out as well.

  Troubleshooting wireless network and Internet (Windows 8)

  If you still have problems then please contact the HP support by phone. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks again for posting and have a great day.

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Try to use remote desktop to connect to a computer in safe mode with networking

  I'm trying to troubleshoot a remotley pc on the network using remote desktop. I can connect properly, however, I want to continue to solve the problems with the pc remote in safe mode. When I choose to restart the pc in safe mode with network remote I am unable to connect to this computer by using remote desktop. Is there a certain config that I need to put in place inside msconfig which will restart in safe mode and I would still like access to connect to this computer by using remote desktop. Thank you.

  Hello

  @hoosier1077

  Assuming this isn't a general network problem (such as restarting changes to the local IP address on the remote computer).

  Maybe this can help.

  http://support.Microsoft.com/kb/315222

  http://support.Microsoft.com/kb/316434

• Is it safe to use Safe Mod with networking for the use of the computer every day?

  Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you

  Hello, Winston,

  It is actually for troubleshooting only.

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.

  Wireless network adapter may not work when you use the Option "Safe Mode with network.

  http://support.Microsoft.com/kb/305616

  Safe mode disables most of the processes and services running. These services include the Windows Update service. »

• Internet problems: can't use it in safe mode with networking

  original title: Internet problems

  My computer connect to internet wireless whenever I turn on my laptop; However, I still can't access internet. I have to go to safe mode with networking to get internet. What can I do? My Xbox is connected to the internet with no problems at all.

  Hi Aaron,

  What antivirus do you use? Since you are able to connect mode without failure, it leads me to believe that this is caused by a program that you run which restricts navigation. Try to disable all antivirus software and try to get online.

  Just note that it's always a good idea to always have an antivirus running. But not more than one at a time can cause problems.

  I hope this helps.

• No access to Windows Update in Windows Vista safe mode with network

  Since yesterday every time I connect normally to Windows Vista, the programs stop responding at random and nothing works Manager tasks even not so I am forced to close it manually, the only way that I normally use my computer is in safe mode

  I googled and someone who has had a similar problem to mine all downloaded updates critical to windows update and that seems to fix the problem

  My question is how can I access Windows Update in Safe Mode with network, because when I click on start - Windows Update, nothing happens and I cannot use windows install either.

  Thank you

  Hi Renee,.

  Please use the Community Forums for Vista.

  Probably not the cause, but enabling it does update race and there is probably a problem there.

  Well, let's see. If all your restore points are gone, it's bad. Often, it is a virus.

  Here's what we need. Error codes, messages, etc.

  If no pop up, go into the event viewer (just type in the search bar) and look in the logs of Windows, Applications, and system folders. Please only after the event. We just need the event id and the application causing him.

  Here's what you can do in the meantime.

  Run the checker system files and chkdsk.

  Get back to us with error messages and follow the directions below.

  Follow these steps.

  Type cmd into the search bar and press to enter.

  The chkdsk command line type, then press on enter.

  If it finds errors, type chkdsk /f to repair.

  Once that is complete, insert your windows installation disc in the drive and return to the command prompt. Type sfc/scannow, and then enter.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get out the mode safe mode with msconfig.

  I'm working on my computer and need to start in safe mode. I ran the msconfig and reboot the laptop. I get to the login screen, but when I get my username and password it tells me that the user name and password is not correct. How to get out the mode safe mode with msconfig.

  When you run msconfig to get set to Safe Mode, you just activate/check the option/SafeBoot at startup. INI tab or did you do something else?

  There is some malware that if you use the/SafeBoot option, you will not be able to use your system again until you remove the switch/SafeBoot the boot.ini for you can boot normally.

  Maybe it's not your exact problem, but I will never suggest to anyone to use the option / SafeBoot never again - too risky when troubleshooting since you can always start new or will never connect again until you remove the switch/SafeBoot.

  Anywho, if that's what you have done, you can start in the XP Recovery Console and then either make a new boot.ini file containing the switch/SafeBoot or simply rename the boot.ini file, you have something like boot.ini.old if you don't have a boot.ini file (I know it seems like a weird idea).

  In a single partition configuration, XP is not even a file boot.ini to boot.  XP will complain if there is no boot.ini file, but will always start very well without one (non-believers - try it!).

  After you get booted up and logged in, you can rename boot.ini.old in boot.ini and run msconfig to remove the option/SafeBoot, and never use it again.

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• Typing becomes very slow in Firefox 3.6.11 in Mode safe mode with all extensions and plugins disabled.

  When I first start Firefox, all right. And everything is fine as long as I type in the text boxes on any web page. I can type in the address bar or search throughout the day with no problems.

  But, for example, just by typing in the edit box to ask this question on this site will result in the problem after I typed more say 150 characters. After this strike ANYWHERE in Firefox will be very slow, even the address bar or the search bar. It doesn't seem to matter what site use to type in the text. Cause the problem to occur after typing in enough strikes.

  Navigation & mouse clicking remains fast - it is only typing seems to be affected. In order to recover, I have to restart Firefox.

  If I look at the use of the UC Firefox.exe in Process Explorer, I see that once the problem occurs, the CPU usage starts whenever I type a key fortification. Indeed Firefox maxes one of my two hearts so the cpu is at 50%! He goes down to 0% again once I stop typing.

  As mentioned in the subject, it is in Mode safe mode with all extensions & plugins disabled. I'm running on Windows XP SP3 with an old AMD Athlon 64 X 2 Dual Core Processor 3800 + (1.81 Ghz) with 2.00 GB of RAM.

  I think it started to happen with Firefox 3.6 significantly (it's amazing how much time I can navigate without having to type), but it sometimes occurred with previous versions. Now he is annoyingly repeatable.

  I have to use '-no - Pei ForTyping distance "to start a separate session of Firefox that I use just to type in the text boxes, so I can restart at will. I also compose messages in an external editor and simply paste in Firefox to avoid typing as much as possible.

  This may be a problem with session restore. Firefox stores session data every 10 seconds to make it possible to restore a session crashed.

  It may be a problem with the sessionstore.js file in the profile folder

  Delete the sessionstore.js and sessionstore.bak and all files files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js.

  See http://kb.mozillazine.org/Session_Restore

• The interface of the AVI with the PC using LabWindows/CVI

  Hi friends,

  I have a vector Network Analyzer Keysight Technologies / Agilent Technologies N5230A. I want to run with the LabWindows/CVI to measure channel 40 GHz. I want to interface the AVI with the PC using LabWindows/CVI. It is really essential for the measures, and I have no experience in doing these things. Would you please direct me to the best, easy as possible of this work? I'm really conscious of the fact that and thank you for your time and concern.

  Mohamed

  I have a vector Network Analyzer Keysight Technologies / Agilent Technologies N5230A. I want to run it with the LabWindows/CVI and measure channel 40 GHz. I want to interface the AVI with the PC using LabWindows/CVI. It is really essential to me, and I have no experience in doing these things. Would you please direct me to the track better, easy and correct these work? I'm really conscious of the fact that and thank you for your time and concern.

  Mohamed

• How to communicate with the gsm using lab view

  Please, someone tell me about the following uncertainties:

  1 can anyone tell me about the GSM part in lab mode?

  2. how to communicate with the GSM using lab view?

  3. how to publish my data through GSM using lab view?

  4. how to use ipod to send data to laboratory?

  5. what a DAC suitable for ipod?

  6. how to install the lab for ipod DAC mode?

  without worrying

  FR. mohammad rehan

  rehan_the_great wrote:

  Can u please tell me the minimum requirement of computer (labtop) for the use of labview, like ram size, HARD drive, map chart etc...

  A simple search for "labview requirements" on this site would have given you the information you want.

  http://www.NI.com/LabVIEW/requirements/

• While in safe mode with networking: are still safe or can get us hacked?

  Hi guys, I just want to ask this question. I'm just curious about it. Thank you!

  Hi guys, I just want to ask this question. I'm just curious about it. Thank you!

  Safe mode with network does not mean that it is a way to protect yourself against hackers...

  Safe mode with networking is mainly used for Troubleshooting of end and most of your application will not run in this mode...
  Networking in safe mode starts Windows with a minimum of drivers and services together as well as it includes the network drivers and services needed to access the Internet or other computers on your network.
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2268

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7
  Even the recommended security antivirus/internet itself cannot defend yourself, if you're not aware of best practices
  Check out these good practices which consist in simple terms...

  http://www.bleepingcomputer.com/tutorials/keep-your-computer-safe-online/

  http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/

• I can access the internet in safe mode with networking; then for a short period in normal startup; but then I lose online access.

  Windows XP: internet connection

  Windows XP: I access to internet in safe mode with networking; then for a short period in normal startup; but then I lose access (IE8, Google, AOL) online. I tried several times, sometimes it seems able to stay online as long as I'm using the installation, but if I take a break, I lose access and return in safe mode.

  This question is submitted in safe mode with networking

  Hello

  Normal mode try to know what actually is the problem with the Internet connection and the components involved.

  Maybe this can help.

  For the wire connection - http://www.ezlan.net/debug.html

  For a wireless connection - http://www.ezlan.net/wireless.html