Directly connected to the same subnet - still get 2 hops?

Similar Questions

• [Win7] How routing metric is determined when wired and connected to the same subnet and enabled both wireless adapter

  We have one under the Network Setup:

  1 Win 7 laptop with the wireless and wired adatper1 card1 enabled and connected to the 192.168.1.0 network.

  WLA1 - 192.168.1.2

  WA1 - 192.168.1.3

  2 Win 7 laptop with the wireless and wired adatper2 card2 enabled and connected to the 192.168.1.0 network.

  WLA2 - 192.168.1.4

  WA2 - 192.168.1.5

  WLA1 and WLA2 are connected by a wireless access point.

  WA1 and WA2 are connected via L2 switch.

  Every time we ping from laptop1 to 192.168.1.4, need the wireless path.

  Similarly, when we ping from laptop1 to 192.168.1.5 only need to access wired road.

  In addition, if we disable WLA1 in laptop1 and laptop1 192.168.1.4 ping, ping does not occur and ping is successful only if the wireless network adapter is enabled. It does not take the cable path.

  I just sub questions:

  -On what basis the route is chosen correctly?

  -Can we expect this happens all the time or roads can vary according to certain parameters?

  -Why it only takes the path wired when we ping from laptop1 to 192.168.1.4 after having turned off the WLA1.

  RB

  You will get a more definitive answer on metrics on Technet

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Direct connection on the desktop - clients still losing access when the server goes down or rebooted service

  I set up the connection to the server with a link Direct is TICKING, I did that once the initial connection has been made for the broker and an assigned desktop computer, connect directly to the desktop and so not care about the State of the connection to the server. After restart or just restart the VMware View Server service all customers lost access until it is facing up.

  Is it right, that we use View 3.1.

  Thank you

  It's strange that I can restart my server connection without worrying about all the users.   How brokers connection you have and do you have activated all at direct connection?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Direct DB request - Connect 2 patterns using 2 pools of connections at the same time?

  Hi all
  
  Will be "Request for Direct database" feature allows to connect to two pools of connections at the same time?
  
  Output report is based on the UNION of two select statements from two schemas, two pools of connections are created to access two schematics
  
  First select statement comes from a single schema and second select statement just forming the other
  
  Select Column1, Column2, Column3 from A, B, C
  UNION
  Select column4, column 5, column6 of X, Y, Z
  
  A, B, C paintings come from the first schema and X, Y, Z come from another
  
  How to get the above out put using "application for Direct database"
  
  Kind regards
  SMA

  It is a very bad idea. If you connect to the same base, then it will be much better to simply synonymous and grants between the schema1, schema2 objects so that you can use a single connection. You query will go much quicker since the BI server do not have to run separate queries to stich together data. If the data are two different databases, it is advisable to do some ETL and group all the data in your Data Warehouse database.

• Help his Mac Mini? Connected to monitor w / sound coming from monitor. I tried speaker external buffering in the back of the unit and still get only his monitor speakers.

  Help his Mac Mini? Connected to monitor w / sound coming from monitor. I tried speaker external buffering in the back of the unit and still get only his monitor speakers.

  How is the monitor connected?

  Are to connect the speakers to the headphone 3.5 mm? And not the line-in jack 3.5?

  If you go to System Preferences > sound > you can select the speakers/headphones output?

• How to determine if 2 IPs are on the same subnet

  Hi all!

  I have a Client/Server connection over a network, and I wants to determine if they are part of the same subnet.

  The server is installed on one OR cFP-2220, so I can't use all the exec system commands to access network settings.

  My code is so far simply determine if the client and server are both on the local host.

  Please see attachment!

  Concerning

  Paul

  Hello!

  Thanks for the reply.

  After a google search, I think it is the right way to do it: (Ref)

  XOR (B and H) (M & a)

  

  Thank you to direct me in the right direction!

  Kind regards

  Paul

• Case 'not the same subnet mask' - WRT54GL

  Hello

  I recently bought a WRT54GL router and tried to feed it with data from my ISP.

  I entered these data to my Windows system as well as my older router and it worked fine.

  These are:

  IP: 213.211.57.xx

  Subnet mask: 255.255.255.0

  Gateway: 213.211.56.1

  However, I get the error "not the same subnet mask" described here .

  If I run "ipconfig/all" to the machine which can be used to connect to the net, I don't get any additional useful info that I described here, (he is also in Czech :-)

  And there is no obvious conclusion in this forum thread.

  Any suggestions?

  Kind regards

  Matej

  OK, so I've solved this by changing the bridge and it works now.

  Interesting that windows was able to deal with him, but...

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.

• WiFi AR5007 802. 11 b / g adapter cannot talk about bridge WET11 Wireless on the same subnet

  Hello

  My HP Compaq Presario C700 VISTA laptop (a AR5007 802. 11 b / g WiFi adapter) and the printer are on the same subnet. The laptop is WiFi connected to my WRT54G2 router/switch and the printer is connected to the workgroup switch that connects to the router via the LinkSys WET11 Wireless Bridge.

  The installer works fine for over a year until he was there when my VISTA does not see any PC on the Working Group 3 weeks pass including the printer. However, the WAN access is not affected.

  I did the filming of following problems (in order):

  1. check the network settings on the laptop VISTA (x.x.x.29) and (x.x.x.201) printer and all look kosher.    (All my PC including notebook computer and printer have IP STATIC)

  2. check the router and the parameters of bridge and fines all eyes (router - XXX1, bridge - x.x.x.140).

  3 Ping printer, bridge, and other PC and received messages "Destination Unreachable Host" or "Request timed out". Although all are on the same subnet. Pingée router is OK.

  4 remove and re-add the wireless profile and tried to connect again. Same problem, no joy!

  5 started VISTA in safe MODE with NETWORK. Once again, the problem has persisted but at least eliminated applications as a potential source of problems.

  6. recycled power switch/router/workgroup bridge. No joy!

  7 WiFi connected other laptops to the same router (WRT54G2) and can ping other PC and printer END.    This means that the problem is limited to my VISTA laptop.

  8 given that the problem is on my VISTA and applications are not the source (see #5) of the problem, then probably the AR5007 802.11b.g wireless network card driver is original so I downloaded driver at HP and installed with version 7.3.201.25.  Problem is persistent...  Arhhh!

  Could there be something else that I missed? Can someone please help.

  Thank you

  You are the very welcome, John.

  Yes this driver will work fine on Vista Home Premium.

  According to the notes on the driver, it can just be run without uninstalling the current pilot you have on there now.

  After executing, you can confirm it 'takes' by going into Device Manager, expand network adapters, click the atheros wireless card, click the driver tab and you should see the installed version 2011.

• Internet does not connect unless it is directly connected to the computer

  This problem occurred yesterday.

  Internet has suddenly stopped working. Things were going to turn power off, then on and distributed. I did check the lights on the modem and the router, but they were all working well. I have plugged on both computers. This does not solve it. I called Charter to see if there was a failure. Unfortunately, it's a message auto troubleshooting which I have materialized with. He had me hang my modem directly to my computer. This solved my problems of the internet.

  I went to sleep for the night in the hope that the internet, or what the question was, would fix itself. He did not. The internet still works only if it is directly connected to the computer.

  There are other people who need to use the internet here. (Invoices, work schedules and other) So maybe it's very much a problem. Any other computer or phone, will work in the House.

  What is a router problem or a cable, or...?

  If your connection works when you plug the modem but not through the router, this indicates a problem with the router.   This could be a hardware failure or a configuration problem.  A problem with the cable between the modem and the WAN port on the router is possible, but unlikely.  It wouldn't hurt to check if she.  Most routers have a reset button recessed.  I suggest that you reset the router and reinstall as if new.  If this fails, you probably need to replace the router.

  Depending on your technical knowledge, you can also log in to the router and check the status information.

• to reach a server on a VLAN that is not directly connected to the inside interface

  scénarion

  PIX 515

  6506 core with VLAN A, B, c. (intervlan routing is ok)

  vlanC is directly connected to the inside interface of the fw

  question

  How a crowd outside could reach a server ServerA on vlanA.

  Hello

  Concerning Point 1, Yes if the roads required for networks connected inside the network is done on pix.

  Concerning Point 2, if the IP address that you use within the network is routable (public IP), the command you gave will work. The command indicates that when 10.10.1.10 inside the network host wants to go outside the network, use the same IP address. Because NAT does not occur, the actual address of the server presents itself as the visible address and the address of the host. So if the IP address you specify is not a public IP address, outside world can't access.

• Multimedia file sharing only works if the two devices are connected using the same protocol

  So I'm frustrated!

  I spent an hour trying to get my Windows 7 computer to share my music with my XBox 360. I have two machines on my network, one connected by Ethernet to the router and the other connected by WiFi. I tried everything I could find online to get the WiFi connected machine appears in the "Music Player" on my XBox system - follow all sharing, make sure that my router has UPnP, restarted a bouquet of services, etc..
  Nothing! During this time, my machine connected to Ethernet was watching me in the face. He has appeared on the XBox without problem. I started to compare the settings on both machines and found no difference.
  Then I remembered, boredom, I had setting up WiFi sync for Windows Phone my wife. In fact, it was this session of troubleshooting that lead me to put this machine on the WiFi in the first place! Seems to set up WiFi sync, Windows Phone and the target of the machine must be, not only connected to the same network (obviously), but for some reason any the $ @$ crazy, both connected by WiFi. I just connected this computer by WiFi - not happy, a faster speed with my wired connection - and immediately fixed the problem itself.
  Then, remembering that, I moved my XBox WiFi network and - presto - my second machine appears without a problem.
  My question is... WTF! ???
  This is ridiculous - this is the same network! Why things must be connected using the same protocol?

  Hi, Edward Petersen,.

  Please contact the Microsoft community. I'll help you solve the problem with sharing music using media sharing.

  Some routers isolate the cable connections and wireless, you can check if you have the option in the configuration of the router to share media

  If the problem occurs, you can contact the router manufacturer for assistance.

  Hope this information helps. If you need help with Windows, simply reply that we will be happy

  to help you.

• Unable to connect to my office that is connected to the same homegroup.

  Original title:

  access to my files on my desktop that is connected to my homegroup problem

  I am unable to connect to my office that is connected to the same homegroup. When I try to access the shared folder my office requested username and password that I had disabled protected by word sharing wat I do? I had tried my group residential password and my name as user but still cannot connect... Thanks for giving me a solution to this problem.

  Hello

  1 did you changes to the computer before the show?
  2. What are the operating systems connected to the homegroup? Is this the same version of Windows?

  3. what anti-virus software is installed on the computer?

  Check if the homegroup settings is correct:
  Homegroup from start to finish
  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  Method 1:
  Try the troubleshooter from the following link and check if it makes a difference:
  Open the homegroup troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:
  You can try the steps from the following link and check if it helps:
  Why I can't join a homegroup?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  I hope this helps!

• Two internet connection on the same PC (WiFi and ethernet)

  I have windows 8.  I have two internet connections. A cable (wired) and another in the microwave (wifi).  Normally isn't a problem because desktop computers are on the cable connections and the TV, laptops and other toys are on wifi.

  But sometimes I want to use two connections on a PC, like download a large file and stream and watch the Broncos game at the same time. I want to use Ethernet as a main and did use WiFi when Ethernet is too busy. I can't understand how to do this.  Anyone know?

  Hi Gerard,.

  You can activate the Wifi and cable connected at the same time, but you can use the Internet from one of them. The computer will prefer the cable if the cable is connected.

  If both are capable of providing Internet access, computer will prefer the wired (Ethernet) network to access the Internet (and not use the Wifi network to access the Internet).

  The advantage of using two connections is to get Internet access without interruption when a connection does not work.

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Hi I use PH CS6 on an IMac, I try to print a picture when I clicked on what kind of paper I wanted to use from the dropdown menu and the photos the two disappeard. W when I tried to print the same photo I get this. There was an error poening your printer.

  Hi I use PH CS6 on an IMac, I try to print a picture when I clicked on what kind of paper I wanted to use from the dropdown menu and the photos the two disappeard. W when I tried to print the same photo I get this. There was an error poening your printer. print functions will be unavailable until you have selected a printer and reopened all documents. If I open the picture in preview oe my IPad it will print. So, how to choose a printer in PH CS6? Thanks John

  Jakee, salvation

  Please follow the steps below to reset the photoshop preferences.

  > Hold down Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.

  Note: Using the hotkey, preference files for custom shortcuts, workspaces, and color settings will also reset to the default.

  If you are still facing the same issue, please uninstall and reinstall the printer drivers and check for the issue.

  Also, please mention what operating system are you using?

  Let me know if it helps.

  ~ UL