The 0 on my keypad

Similar Questions

• Problems with the Thinkpad E560 keyboard/keypad and mouse mats

  I bought my Thinkpad around time of December-January, and since there has been some recurring problems.

  On the one hand, with the keyboard, sometimes some of the keys stick: say I'm going to hold the S key and then release, sometimes it keeps acting as if he is still in detention. In addition, the entire keypad has stopped working; at this time last week, it worked perfectly fine, I used to use the calculator, lock the buttons on the internet Explorer and file at the top of the key all the time, but one day they just stopped working. The numbers themselves, as well as the NumLock key and others, also do not work. I tried to reboot, perform analysis, installation of the drivers and all sorts, but without success.

  Finally, with the mouse pad, sometimes sections of it will stop working. As I type this, I can use the right side of my mousepad to move the mouse, but the left side does not work. Sometimes it will change, with the center of the mouse pad does not, while the very right and left mouse do. Usually reinstalling a driver or reboot the computer solves this problem, but it keeps happening and is very frustrating.

  This laptop is a few months old only, I'm not too happy with the problems that keep popping up, and I hope that someone can be useful!

  Thank you

  My mistake! I had completely missed the BIOS update, I installed and fixed this problem. I found it here, if anyone else has similar problems

  http://support.Lenovo.com/GB/en/products/laptops-and-netbooks/ThinkPad-edge-laptops/ThinkPad-E560/do...

• How re-pair the bluetooth keyboard & numeric keypad - he will not give me a pairing code.

  I'm having a problem, try to re - connect my Bluetooth keyboard and numeric keypad.  First my keypad has been properly installed and works fine, but then when I tried to add the keyboard that I clicked on the number pad icon again once and he gave me a code to enter, I canceled just thinking it was already installed and working, and I didn't need to do.  Big mistake!  Now I could not do re-paired again.

  After talking with a guy tech at Staples, I disabled bluetooth for my laptop completely and then distributed in the computer and re-enabled Bluetooth.  I was able to add my mouse still fine, but now the keyboard and the numeric keypad gives me the same error and won't let me pair.   The message is:

  Pairing failed.  An ocrred of error during the process of pairing with Microsoft Bluetooth Number pad.  Make sure that the device is discoverable, and then click Retry.

  Well, I did it several times but without success.  He won't give me a code for one of these pair again.

  I use Windows XP.

  Can anyone help?

  Thank you!

  Penny

  Hello

  You can try the solutions listed in the articles below and check if that helps.

  http://support.Microsoft.com/kb/838398/en-us

  http://support.Microsoft.com/GP/cp_keyboards_master#TAB0

  http://www.Microsoft.com/hardware/Bluetooth/connectionguide3.mspx

  http://www.Microsoft.com/hardware/support/Bluetooth/en-us/default.mspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I access the settings for my keypad on my samsung netbook running windows 7 home premium N230?

  I have a wireless mouse to use because when I tap the trackpad is Movin' the cursor whenever I brush on n to become clumsy typing! However, I can't seem to find where and how do I temporarily disable the trackpad so that I don't have this problem?

  Hello

  Check with the manufacturer of system support, documentation in line, or forums as there
  probably are shortcut keys that enable and disable the touchpad functions.

  Samsung - Support - click on the link "Computing."
  http://www.Samsung.com/us/support/main/supportMain.do

  Samsung - visit your country Site
  http://www.Samsung.com/us/common/visitcountrysite.html

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with)
  Entries of TouchPad) and some have a utility that loads in the Notification area near clock on
  at the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration-Device Manager - mice and pointing devices - Double click on the TouchPad
  -Pilot Tab - click on Update Driver (which is may not make anything as long as MS is far behind)
  drivers of certification), now RIGHT CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself
  (all in it). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we must
  Clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Music and sounds of the game won't play; all other sounds work

  I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• Location of keypad?

  I have a computer laptop dv4-5260nr HP Envy, where is the location of the numeric keypad?

  Hello

  Due to the size of the machine, no physical keypad digital available on dv4 machines otherwise it should be on the right side.

  Kind regards.

• When I try to type with the keys that have numbers on them, I have numbers instead of letters.

  The keyboard of my laptop does not work correctly.

  I have somehow turned the keys of the calculator and when I try to type with the keys that have numbers on them, I have numbers instead of letters.  Does anyone know how to disable this option?

  I use a laptop with a wireless keyboard to send this message, but want to use my laptop keyboard.
  Help!

  Hi newsgirl,.

  Somewhere at the top of the laptop keyboard is a key that says Num Lock (or Num Lk or something like that).  It can be accessed directly, or you may need to press a key to access (or some other keys).  In any case, you must click this to turn off the number lock because it is what causes the problem.  This key is usually used on laptops to create a section of a regular keyboard that can act as the normal keyboard calculator keypad (for those who need that, like accountants or persons who need to enter strings of numbers).  Once you turn it off, you will be fine as the keyboard returns to normal.

  I hlpe that aid.

  Good luck!

• Keyboard, mouse not responding do not initially on the Wake computer

  I had a strange problem with Windows Vista Home Premium 64 - bit for about 3 months now. When I wake my computer from sleep mode, the keyboard and the mouse are for 15 to 30 seconds. Turns on the led Verr Num keypad, like the light under the mouse. However, I do nothing what to do (even by unplugging and in re - connect during this period) seems to remedy. Interestingly, both Vista sounds said devices being inserted and removed a LOT up to the keyboard and mouse early answer.

  I checked the drivers for two of them, updated their and reinstalled the. I went around what are the USB ports, they are connected. I have reviewed all the USB ports (inside and outside), and they are not damaged at all.

  I checked around several forums that I can count, and nobody else seems to have this problem. I did affect Vista?

  Hi slappmedoo,

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Must be signed with the RIM Runtime Code Signing Key (RRT) - example of code bar

  Hi, when I try to start the bardcode example in my device (9780 Smartphone), I get

  "Error starting BarCodeApp: Module 'BarCodeApp' must be signed with the RIM Code Signing Key (RRT) DURATION.

  The only class I have in my project is:

  import java.util.Hashtable;
  import java.util.Vector;
  
  import net.rim.blackberry.api.browser.Browser;
  import net.rim.blackberry.api.browser.BrowserSession;
  import net.rim.device.api.barcodelib.BarcodeBitmap;
  import net.rim.device.api.barcodelib.BarcodeDecoder;
  import net.rim.device.api.barcodelib.BarcodeDecoderListener;
  import net.rim.device.api.barcodelib.BarcodeScanner;
  import net.rim.device.api.command.Command;
  import net.rim.device.api.command.CommandHandler;
  import net.rim.device.api.command.ReadOnlyCommandMetadata;
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.system.KeyListener;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.Keypad;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.XYEdges;
  import net.rim.device.api.ui.component.BitmapField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.EditField;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.FullScreen;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.decor.BorderFactory;
  import net.rim.device.api.ui.toolbar.ToolbarButtonField;
  import net.rim.device.api.ui.toolbar.ToolbarManager;
  import net.rim.device.api.util.StringProvider;
  
  import com.google.zxing.BarcodeFormat;
  import com.google.zxing.DecodeHintType;
  import com.google.zxing.common.ByteMatrix;
  import com.google.zxing.qrcode.decoder.ErrorCorrectionLevel;
  import com.google.zxing.qrcode.encoder.Encoder;
  import com.google.zxing.qrcode.encoder.QRCode;
  
  /***
   * Barcode API Sample
   * 
  
   * This application demonstrates the most common use of the Barcode API: 1)
   * Creating and displaying a QR code, 2) Scanning a QR code and opening the
   * browser pointing to that URL. It could be easily modified to scan/create
   * other kinds of barcodes, or do other things with the scanned/created barcode.
   *
   * @author PBernhardt
   *
   */
  public class BarcodeAPISample extends UiApplication {
  
      //This controls how big barcode we will display is to be
      private static final int BARCODE_WIDTH = 300;
  
      // This is the app itself
      private static BarcodeAPISample _app;
  
      // Errors will be logged here
      private LabelField _logField;
  
      // The main screen which holds the toolbar and displayed barcode
      private MainScreen _mainScreen;
  
      // The barcode is displayed here
      private BitmapField _barcodeField;
      // The text stored here is converted into a barcode by the user
      private EditField _barcodeTextField; 
  
      // This controls the scanning of barcodes
      private BarcodeScanner _scanner; 
  
      // This screen is where the viewfinderf or the barcode scanner is displayed
      private FullScreen _barcodeScreen;
  
      public BarcodeAPISample() {
          // New screen
          _mainScreen = new MainScreen();
  
          // Create the log field so it can be used in this constructor
          _logField = new LabelField("Log: ");
  
          // Create the place-holder for the barcode image and add it to the main
          // screen
          _barcodeField = new BitmapField(new Bitmap(BARCODE_WIDTH, BARCODE_WIDTH), Field.FIELD_HCENTER);
          _barcodeField.setBorder(BorderFactory.createBevelBorder(new XYEdges(2, 2, 2, 2)));
          _mainScreen.add(_barcodeField);
  
          // Create and add the field to store the barcode contents
          _barcodeTextField = new EditField("Barcode text: ", "http://devblog.blackberry.com");
          _mainScreen.add(_barcodeTextField);
  
          // Add "display barcode" and "scan barcode" toolbar buttons
          /**
           * This is a quick example of the new (in 6.0)
           * net.rim.device.api.command package and the
           * net.rim.device.api.ui.toolbar package. All it does is invoke the
           * displayBarcode() or scanBarcode() method when you click the
           * corresponding button. For more details on this package, see the
           * JavaDocs or elsewhere in the Developer Resource Center
           */
          ToolbarManager toolbar = new ToolbarManager();
  
          ToolbarButtonField displayBarcodeToolbarButtonField = new ToolbarButtonField(new StringProvider("Display"));
          displayBarcodeToolbarButtonField.setCommand(new Command(new CommandHandler() {
              public void execute(ReadOnlyCommandMetadata arg0, Object arg1) {
                  displayBarcode();
              }
          }));
          toolbar.add(displayBarcodeToolbarButtonField);
  
          ToolbarButtonField scanBarcodeToolbarButtonField = new ToolbarButtonField(new StringProvider("Scan"));
          scanBarcodeToolbarButtonField.setCommand(new Command(new CommandHandler() {
              public void execute(ReadOnlyCommandMetadata arg0, Object arg1) {
                  scanBarcode();
  
              }
          }));
          toolbar.add(scanBarcodeToolbarButtonField);
  
          _mainScreen.setToolbar(toolbar);
  
          // Add the log field to the bottom
          _mainScreen.add(_logField);
  
          pushScreen(_mainScreen);
      }
  
      // Simply create the the app and enter the event dispatcher
      public static void main(String[] args) {
          _app = new BarcodeAPISample();
          _app.enterEventDispatcher();
  
      }
  
      /**
       * displayBarcode
       * 
  
       * This method will take the text in the _barcodeTextField, convert it into
       * a QRCode and display it on the main screen. It could be easily modified
       * to use a different barcode format or to get the text from somewhere else.
       */
      private void displayBarcode() {
          try {
              QRCode qrCode = new QRCode();
  
              // This encodes the text with a low level (%7) of error correction
              Encoder.encode(_barcodeTextField.getText(), ErrorCorrectionLevel.L, qrCode);
  
              // From there we get the actual data matrix and convert it into a
              // bitmap
              ByteMatrix barcode = qrCode.getMatrix();
              Bitmap bitmap = BarcodeBitmap.createBitmap(barcode, BARCODE_WIDTH);
  
              _barcodeField.setBitmap(bitmap);
  
          } catch (Exception e) {
              log("Exception: " + e);
          }
      }
  
      private void scanBarcode() {
          // If we haven't scanned before, we will set up our barcode scanner
          if (_barcodeScreen == null) {
  
              // First we create a hashtable to hold all of the hints that we can
              // give the API about how we want to scan a barcode to improve speed
              // and accuracy.
              Hashtable hints = new Hashtable();
  
              // The first thing going in is a list of formats. We could look for
              // more than one at a time, but it's much slower.
              Vector formats = new Vector();
              formats.addElement(BarcodeFormat.QR_CODE);
              hints.put(DecodeHintType.POSSIBLE_FORMATS, formats);
  
              // We will also use the "TRY_HARDER" flag to make sure we get an
              // accurate scan
              hints.put(DecodeHintType.TRY_HARDER, Boolean.TRUE);
  
              // We create a new decoder using those hints
              BarcodeDecoder decoder = new BarcodeDecoder(hints);
  
              // Finally we can create the actual scanner with a decoder and a
              // listener that will handle the data stored in the barcode. We put
              // that in our view screen to handle the display.
              try {
                  _scanner = new BarcodeScanner(decoder, new MyBarcodeDecoderListener());
                  _barcodeScreen = new MyBarcodeScannerViewScreen(_scanner);
  
              } catch (Exception e) {
                  log("Could not initialize barcode scanner: " + e);
                  return;
              }
          }
  
          // If we get here, all the barcode scanning infrastructure should be set
          // up, so all we have to do is start the scan and display the viewfinder
          try {
              _scanner.startScan();
              _app.pushScreen(_barcodeScreen);
          } catch (Exception e) {
              log("Could not start scan: " + e);
          }
  
      }
  
      /***
       * MyBarcodeDecoderListener
       * 
  
       * This BarcodeDecoverListener implementation tries to open any data encoded
       * in a barcode in the browser.
       *
       * @author PBernhardt
       *
       **/
      private class MyBarcodeDecoderListener implements BarcodeDecoderListener {
  
          public void barcodeDecoded(final String rawText) {
  
              // First pop the viewfinder screen off of the stack so we can see
              // the main app
              _app.invokeLater(new Runnable() {
                  public void run() {
                      _app.popScreen(_barcodeScreen);
  
                  }
              });
  
              // We will use a StringBuffer to create our message as every String
              // concatenation creates a new Object
              final StringBuffer message = new StringBuffer("Would you like to open the browser pointing to \"");
              message.append(rawText);
              message.append("\"?");
              log(message.toString());
              _barcodeScreen.invalidate();
  
              // Prompt the user to open the browser pointing at the URL we
              // scanned
              _app.invokeLater(new Runnable() {
                  public void run() {
                      if (Dialog.ask(Dialog.D_YES_NO, message.toString()) == Dialog.YES) {
  
                          // Get the default sessionBrowserSession
                          BrowserSession browserSession = Browser.getDefaultSession();
                          // Launch the URL
                          browserSession.displayPage(rawText);
                      }
                  }
              });
          }
  
      }
  
      /***
       * MyBarcodeScannerViewScreen
       * 
  
       * This view screen is simply an extension of MainScreen that will hold our
       * scanner's viewfinder, and handle cleanly stopping the scan if the user
       * decides they want to abort via the back button.
       *
       * @author PBernhardt
       *
       */
      private class MyBarcodeScannerViewScreen extends MainScreen {
  
          public MyBarcodeScannerViewScreen(BarcodeScanner scanner) {
              super();
              try {
                  // Get the viewfinder and add it to the screen
                  _scanner.getVideoControl().setDisplayFullScreen(true);
                  Field viewFinder = _scanner.getViewfinder();
                  this.add(viewFinder);
  
                  // Create and add our key listener to the screen
                  this.addKeyListener(new MyKeyListener());
  
              } catch (Exception e) {
                  log("Error creating view screen: " + e);
              }
  
          }
  
          /***
           * MyKeyListener
           * 
  
           * This KeyListener will stop the current scan cleanly when the back
           * button is pressed, and then pop the viewfinder off the stack.
           *
           * @author PBernhardt
           *
           */
          private class MyKeyListener implements KeyListener {
  
              public boolean keyDown(int keycode, int time) {
  
                  // First convert the keycode into an actual key event, taking
                  // modifiers into account
                  int key = Keypad.key(keycode);
  
                  // From there we can compare against the escape key constant. If
                  // we get it, we stop the scan and pop this screen off the stack
                  if (key == Keypad.KEY_ESCAPE) {
                      try {
                          _scanner.stopScan();
                      } catch (Exception e) {
                          log("Error stopping scan: " + e);
                      }
                      _app.invokeLater(new Runnable() {
                          public void run() {
                              _app.popScreen(_barcodeScreen);
  
                          }
                      });
  
                      return true;
  
                  }
                  // Otherwise, we'll return false so as not to consume the
                  // keyDown event
                  return false;
              }
  
              // We will only act on the keyDown event
              public boolean keyChar(char key, int status, int time) {
                  return false;
              }
  
              public boolean keyRepeat(int keycode, int time) {
                  return false;
              }
  
              public boolean keyStatus(int keycode, int time) {
                  return false;
              }
  
              public boolean keyUp(int keycode, int time) {
                  return false;
              }
  
          }
      }
  
      /***
       * log
       * 
  
       * Writes a message to an edit field for debug purposes. Also sends to
       * STDOUT.
       * 
  
       *
       * @param msg
       *            - The String to log
       */
      public void log(final String msg) {
          invokeLater(new Runnable() {
              public void run() {
                  _logField.setText(_logField.getText() + "\n" + msg);
                  System.out.println(msg);
              }
          });
      }
  }
  

  My request is properly signed and work very well in the Simulator.

  Thanks in advance.

  Solved.  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/Support_-_Sign...

• Sculpt the keyboard sticking keys

  My keyboard to sculpt always acts as if it was a paste keys when leaving "sleep" mode... I have confirmed that it is this keyboard switching with my keyboard to work the same.

  I can't find the product id is required to get aid to the replacement of this keyboard. I have read and reread the articles that explain how to find your product id, but no luck... I also knocked on all the numbers that are under the lid of the battery for the keyboard, mouse and keypad.

  I can't also use either shift key and the letter "c" at the same time... I have to hit the caps lock to capitalize a 'c '... All other characters work very well...

  I have had several similar keyboards Microsoft go wrong over the years and I called the Technical Support material, they sent a replacement (toll-free): http://www.microsoft.com/hardware/en-us/support/contact-us

  J W Stuart: http://www.pagestart.com

• Repositioning is not the right word

  I am looking for a way to modify an element in a sequence and pulling on the edges of the clip with my mouse does not do the trick. There is an arrow that comes out on the side of the clip that I can drag to the left or right (for the specific clip, I need to slide to the right) and me just to drag some images, but me being the big box, fragile type right-handed that I am, it turns out pretty hard. I know there are several ways to move clips with the arrow keys. Is it possible to lengthen a clip to a few executives with the arrow keys or possibly another function? I'm quite new in the world of creation, but I pick up things quickly. Thanks in advance for any help! Take care...

  Select the entry or exit point of the clip by clicking on it with the mouse to the end of the clip is selected:

  

  then type the number of images you want to move the point on your keypad and press ENTER. Enter a negative number if you want the point to move earlier (left).

  MtD

• Help with the looks to copy it from the clip of

  I so want to wrap your head around this program frustrating (I do so well with the rest of the suite Adobe), but I'm fighting.  It should be simple, but try as I might I can't seem to make it work.

  After building a glance on a clip with the color wheels and sliders and the primary and secondary layers and masks, etc... I just want to COPY exactly the look on the same instance of the clip in subsequent shots.  Or maybe who will overlook a different plug, but the same time otherwise.

  I don't want to use the shooting function.  I want to COPY, as you may first CS6 and now with the attributes of the dough into CC.

  I've read and seen in the tutorials a confusing function that involves the Alt keys and keypads, but I'm on a Mac of the retina that has the smaller keyboard.  And this copy feature seems limited to spaces '9 '.  What about a clip that reappears 10 slots later?

  Am I missing something?  The manual says hitting 'C' allows you to copy a grade, but then what?  There is no function "Paste."  Help!  And I thank you.

  If I can't do that, then this program is certainly not for me.

  I use the C all the time. This is copy - paste at once:

  1. Select the item you want to copy to

  2 hover your mouse over the clip you want to copy from (don't click)

  3. press on "C".

  The clip in step 1 should have now the ranking form of battery the clip in step 2.

• FN + F10/F11/F12 in Satellite Pro U300 does not work

  Guys,

  need your help...
  I have the Satellite Pro U300 series and most recently the numbers four and six obtained busted... its does not work so I try to use the superposition of numeric keypad but I have observed that after pressing FN + F11 nothing happens...

  Please help me...

  Thank you
  <>

  Hello

  When you use FN + F11 small control LED must be lit and the keypad must be enabled.
  If your laptop is preinstalled with Toshiba recovery image this option SHOULD work correctly.

  So nobody here knows what you did with your laptop and why these options are not available more.
  Before you start with advice how to get this working again once please let us know what operating system is preinstalled on your Satellite Pro U400.

• Satellite C - broken screen series

  Tonight, I ran my computer screen that I rested it down (not too hard, but he slipped a bit from my grip).

  The laptop seems to work fine except for a problem with the screen. About 3 quarters of the screen does not work, it's just white background with colorful stripes and a large black diagonal.

  Is this likely to be simply a screen broken, which could be solved by replacing the screen itself? I'm waiting to order a new screen, but I don't want to spend the money if the problem is likely to be something else...

  I also said that it is relatively easy to replace the screen yourself. I did minor repairs on laptops / pc in the past (new keyboard/keypad). I don't have insurance/assurance and can not afford a pro. Is this something, I should be able to do it myself?

  Can anyone help?

• Broken screen - Satellite C660

  Tonight, I ran my computer screen that I rested it down (not too hard, but he slipped a bit from my grip).

  The laptop seems to work fine except for a problem with the screen. About 3 quarters of the screen does not work, it's just white background with colorful stripes and a large black diagonal.

  Is this likely to be simply a screen broken, which could be solved by replacing the screen itself? I'm waiting to order a new screen, but I don't want to spend the money if the problem is likely to be something else...

  I also said that it is relatively easy to replace the screen yourself. I did minor repairs on laptops / pc in the past (new keyboard/keypad). I don't have insurance/assurance and can not afford a pro. Is this something, I should be able to do it myself?

  > Is this something, I should be able to do myself?
  In general Yes, you can do it yourself but without paper manuals maintenance and experience, it could be a little difficult and risky. Many screws are hidden and much small parts have plastic holders which could be broken.

  Of course, it would be better to pay someone to do this on a professional manner without some risks. You must decide what needs to be done. If you want to do it yourself and there is a problem let us know.