Directory of CUCM on displayed randomly EX90

Similar Questions

• How to display random lines from txt file

  Good morning (or evening all). I am creating an application and want to display random lines of a text file. I know how to create a text file using file connections, but how can I read the random lines of her?

  OK I got it.

  For beginners like me to have a problem in the future, I was not specify my path correctly. It is not enough to land your .txt in the /res folder and wait for the Simulator to load. You must load from SD card or device memory.

  Use the method found here:

  http://www.weask.us/entry/J2ME-BlackBerry-read-write-text-file

  to use it's as simple as that

  StringfName = "file:///SDCard/Blackberry/text.txt";

  String printLine = readTextFile (fName);

  label.setText (printLine);

  Somewhere in your project directory create a directory called SDCard (I did in my res folder).

  In the Simulator go to switch SD card, then load Select Directory and select the new directory of the SD card. This will create the structure of the SD card in the Simulator. Simply move your .txt in the SDCard/Blackberry directory and run your application.

• ACS 5.2 Directory groups are not displayed, I can't selec

  Hello

  I have GBA 5.2 VMware.

  Directory groups are not displayed, I can't select.
  Please it is very urgent, your help will be invaluable to me.

  ACS joined 5.2 AD purpose users cannot authenticate.

  Can someone help me?

  This patch you run on ACS 5.2? There is a known problem with the recovery of group. Check the latest ACS 5.2 patch to solve this problem.

  CSCtl23615    Failed to retrieve AD Group info. Centrify library error

  Symptom:
  Unable to retrieve AD groups and attributes AD

  Conditions:
  ACS is attached to an AD domain 2008R2. In trying to recover the ad groups or attributes, the operation fails with an error of Centrify library.

  Workaround solution:
  None

  Integration with Active directory by the ACS:

  http://www.Cisco.com/c/en/us/support/docs/security/secure-access-control...

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• Import and export directory for CUCM and TMS

  How can I configure TMS and CUCM use of TMS directory for an endpoint registered to CUCM? I've added to TMS but and TMS can shoot CUCM Phonebook, but how does he see the directory for other infrastructure in TMS to fill in the directory of CUCM CUCM?

  tms_not_supported.PNG

  

  If the endpoint of telepresence is running TC7.0 or later, you can configure in CUCM using TMS as a source of spare phone book, there are also TMS 14.4.  Refer to the Administration of the TC on CUCM 10.5.1 endpoints (TC7.2) on page 24 for more information.

• Lightroom 6: display random flashes and Pixelation

  I've recently set up a new computer, with Windows 7pro, graphics Nvidia Quadro 1200 HP z240 & Samsung CF390 series 24 inch monitor curved, for Lightroom, updated the OS, drivers and related programs content before installing Lightroom.  I especially liked that the computer had no bloatware, so conflict of program should not be a problem.  Only when using with Lightroom high and active (partial or complete window display) will I get erase display random, momentary.  When the display is in place and only with LR running also make pixelation on the whole of the workspace of LR (see image).  I tried to reinstall LR and setting the parameters on the display, the video card and the computer, but nothing seems to work.  I welcome suggestions of what could be the source of this problem, because I was really looking forward to back up a computer 13 "laptop for use of LR.

  

  I had posted this suspect, it can be linked to the comparability of the Quadro 1200 and Lightroom.  Turns out that the problem is the cable between the computer and the monitor.  The graphics card has output mini DisplayPort (DP), while the monitor requires HDMI.  If it was the use of a mini DP to HDMI with HDMI cable or the quality of a, once I changed to a mini DP - HDMI cable, see all the problems reported have been resolved.  Thanks for your help.

• Display random banner

  Hello

  I have created a slideshow with 3 different banners. I would like to appear as random when the user refreshes their broswer.

  Currently, I have slide 1, 2 and 3 in that order. I also created the label for each slide in the timeline panel. Is there a script for me to do each of the slide to display randomly?

  Thank you.

  Hi shagon13,

  Uncheck "auto play" and add the code below to your stage/compositionReady event (this is assuming that your image labels are 'image1', "frame2", etc. It can read a random label on your timeline to scene root.

  function to get a random value in the range

  sym.randomNumRange = function (from, to) {}

  Return 1;

  return Math.floor (Math.random () * (- + 1) + a);

  }

  the variable value number random within the range

  sym.playFromValue = sym.randomNumRange (1, 3);

  play random value on stage root timeline

  SYM. Play ("frame" + sym.playFromValue);

  I hope this helps!

  Tim

• Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

  Hey all,.

  I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

  My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

  Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

  

  If you follow this step 3.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

  You will need to select "format and repartition disks" as windows 10 will have changed partitions.

• Search a directory of data and display the data that is within the range of dates

  Hello

  I have a full idrectory of data from overtime, and I think of search in the directory and display the data files for specific dates. I only started this encoding yet but I figure I'll take the brain of some SMEs here labview and start in the right direction. My goal is to go through a comprehensive directory of data taken for a month or MORE csv files and select the data to process and display office files the date of its registration. If I take the data of last week, last month or last minute, it should just treat as an exact or more.

  Please help me get started on the right foot

  End date will be probably greater than the start date, right? So, end date must connect at the entrance to the upper limit. Then wire in the range? to the conditional terminal of a tunnel of conditional indexation.

  Lynn

• Changing the settings to display randomly - 1152 x 864 resolution changes randomly to 1024 x 768

  At seemingly random times, the display settings change of 1152 X 864 pixels, I put it to 1024 X 768, that moves a lot of icons.  I then have to go to customization - display back change and move icons where I want that they on the desktop.  It's very annoying.  I have a Gateway computer and have seen similar complaints from Dell and HP users.

  How can I get the display of 1152 X 864 to stay?

  What causes the display to change?

  Thank you

  Bill Kenney

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to check and clean boot if this can help.

  How to solve problems using the clean boot in Windows 7: http://support.Microsoft.com/kb/929135  
  Note: once the diagnosis has been made, make sure that you try to step 7 of the article to reset the computer as usual.

  Method 2:

  Run the scan of auditor of file system (CFS) and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Note: this will help you to replace the system file that is causing the problem.

  Method 3:

  Try to update the display driver and check if it helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope that helps!

• How to register tc4.2.3 Pentecost CUCM 7.1.5 EX90?

  I'm trying to configure the EX90 with third party SIP (Advance) device, but not yet register.

  also configure in EX90

  commissioning--> ExternalManager--> address: IP Editor

  SIP-> profile 1--> [email protected] / * / Editor

  DefaultTrasport: automatic

  Type: Cisco

  Proxy 1: manual---> IP Editor

  1 authentication--> LoginName: UserDigest Passwrod: Digest credentials

  CUCM

  Device name: MAC EX90

  DP, location, CSS, security, SIP Digest user profile profile.

  An extension of line 1

  Also try with simple SIP but not registry.

  Hello

  The units can be saved to cucm as endpoints (base) of third parties.

  Please find the steps to register.

  Configure sip on unit settings such as address uri and sip proxy.

  1. sip mode: on

  2 SIP Uri: [email protected] / * / of cucm for example: [email protected]/ * /.

  3. Discovery: manual

  4. proxy address: ip address of cucm.

  5. type: standard

  6 default Transport: whether auto snack but who do not work, change to udp.

  7 TLs: off

  8: authentication sip username: user you created on cucm eg 9011

  9 password: use the same password configured when creating user 9011

  10 turn off the commissioning mode.

  CUCM config:

  1. Select the basic profile of third party.

  2. Add the mac address of endpoint mxp.

  3. Select the appropriate sip, phone etc models profile.

  4. under user digest and owner user id select the same user, for example: 9011

  5. save the configuration and assign DN even that we used in the uri on mxp sip settings.

  6. also associate device mxp the user using the association on cucm devices pane.

  Please let me know if that work for you. I tried this in my lab and works.

  Thank you

  Amlesh

• Second display Tandberg EX90

  Hello, I had a question about the Tandberg EX90, I am trying to connect to a projector in the HDMI Out of the Tandberg, but it's not give signal to the projector, right now, that is - this installer is that the HDMI output:

  xConfiguration video output HDMI 1 resolution: 1920_1080_60

  xConfiguration video output HDMI 1 OverscanLevel: Medium

  xConfiguration video output HDMI 1 EAC Mode: Off

  xConfiguration video output HDMI 1 MonitorRole: second

  It's not giving a signal in the projector via the HDMI Out, I checked the Option keys and it isn't a dual display Option key:

  * s SystemUnit software OptionKeys DualDisplay: "false."

  I need a key option for a second screen to work? It's making to work as a single monitor, which means having the same video on two screens, one of the EX90 and projector.

  Kind regards.

  Yes, you will need option double screen (reference number: LIC-EX90-DD).

• Firefox always displays random lines while playing any HTML5 video.

  Firefox always random poster while playing any HTML5 video.
  Screenshot: http://i.imgur.com/8zSNOJ2.jpg

  Videos HTML5 work well only in full screen.

• BlackBerry Smartphones SMS & MMS list displays random messages

  Hi all, this is my first post here, I hope you can help us?

  My SMS/MMS list is crazy, it shows a couple of posts of the month rather than the usual chronological display. If I type ALT S the list back to normal and I can see all the messages that I sent in the correct order. It's driving me crazy! Any ideas?

  Thank you

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  Check once again, they appear correctly now?

• Help! Text display randomly each time I click using ActionScript 3.

  Hi! I am doing a school project using Adobe Flash ActionScript 3. Here is a picture of what I'm working on:

  

  I have a layer of text box on the top of the bubble of conversation. Initially it is empty, then I click on Hello Kitty and a random sentence appears in the text box of the chart that I created. However, when I click on him once again she won't tell another random phrase. I don't know what I'm doing wrong. Here's the code. Please, take a look at it and let me know what I can do about it! Thank you!

  
  

  var myPhrases:Array = new Array(); HELLO KITTY PHRASES TO TALK ABOUT A BUBBLE

  myPhrases [0] = ' my name is Hello Kitty!';

  myPhrases [1] = "How are you today?"

  myPhrases [2] = "smile!" It's a beautiful day! « ;

  myPhrases [3] = "I want to be your friend!"

  myPhrases [4] = ' you have a big smile! "

  myPhrases [5] = "I love flowers & rainbows.";

  myPhrases [6] = "what is your name?"

  myPhrases [7] = 'We are going to find Dora and go on an adventure!';

  myPhrases [8] = "Mmmmeeeeoooowww!"

  
  

  var i:int=Math.floor(myPhrases.length*Math.random()); SENTENCE AT RANDOM

  var value = myPhrases [i];

  
  

  HKITTY_mc.addEventListener (MouseEvent.CLICK, onClick); EXPRESSION OF CHANGE WHEN YOU CLICK ON HELLO KITTY (IT DOES NOT!)

  
  

  function onClick(event:MouseEvent):void {}

  stop();

  ILOVEMYTEXTBOX.text = value;

  }

  
  

  If you simply copy these two lines of code in the service, he'll take care of things...

  function onClick(event:MouseEvent):void {}

  var i:int=Math.floor(myPhrases.length*Math.random()); RANDOM NUMBER

  var value = myPhrases [i];

  ILOVEMYTEXTBOX.text = value;

  }

  which you could shorten to...

  function onClick(event:MouseEvent):void {}

  ILOVEMYTEXTBOX.text = myPhrases [Math.floor (myPhrases.length * Math.random ())];

  }

  and you should be able to remove the double post, you have to do this

• Display random flicker watching videos.

  So whenever I look at Netflix or Youtube, the video will play very well, but 30 seconds after he plays, he flickers the video on the screen or decrease intensity for a second or two and then return to normal. This issue started happening when I upgraded to OSX Sierra.  I don't find it a big deal if it happened only once or twice, but sometimes every 30-60 seconds on Netflix and youtube. I tried to restart my MacBook Pro (retina, 13-inch, early 2015) with no luck. So, anyone think they have a potential solution to this? (P.S. Yes, everything is fully updated)

  Hey there! I was confronted with this exactly the same problem with probably the same MacBook Pro (retina, 13 inches, early 2015, 128 GB SSD). You can check my comments in these threads:

  • Video playback full screen Netflix bug?
  • Re: Flickering on Netflix after update of the Sierra

  So far, no solution. But I use Firefox for Netflix playback and I don't have to deal with all the questions.