Second display Tandberg EX90

Similar Questions

• Certification on Tandberg Ex90 input HDMI HDMI standard.

  Hi all

  Recently, our client is using the mooring of the PC as a with the Tandberg Ex90 HDMI input, however, defective with the docking of Tandberg Ex90 is relatively high (about 15%). So, we discussed with the seller of mooring, and they would like to provide us with the HDMI from the Ex90 standard certification.

  Anyone know the details of the certification Standard of Tandberg ex90 device?

  Best regards

  Ben

  Hello

  can you give us a detailed care of the used docking station?

  Do you mean after the docking station is connected, the input HDMI 1 becomes unusable?

• Latest iMac which can be used as a monitor / second display

  What iMac was the last that could be used as a second screen / monitor to a newer iMac?

  I need to make a decision wrt for the implementation in one of our positions.

  Have fun with your Mac on Easter

  Leo

  Please read Apple use your iMac as a display with the target Display Mode

• What should I do to use my hdtv as a second display for my macbook pro using airplay.

  Hey guys,.

  I was just trying to understand how to use my tv as a second monitor to run different applications on fullscreen, as an application on my mac and the other on the TV.

  I tried to 'use as a separate display option' of the airplay button, it doesn't seem to help.

  Appreciate if someone could help me with that.

  > for example,.

  I want to facetime runs in full screen mode on my apple tv, at the same time, I use pages, however I don't want pages is displayed on my tv screen.

  I know its possible, but I don't know how I have to happen.

  When you use AirPlay to Apple TV, open system-> Display Preferences. Clear the option to mirror the views.

• Second display M92p port

  I looked for this answer, but could not find one. I have a small M92p. No second option. Can I order just the display port and cable to add the second RFP?

  Thank you.

  See this thread: https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/Dual-ThinkVision-Monitors-with-ThinkCentre-M...

• Two monitors / installation of a second display driver

  Hello

  I'm not able to get my two monitors running. I just performed a new installation; These monitors were fine with my other drive hard and windows.

  I checked my display drivers in Device Manager and there is only one pilot listed under display cards

  ATI Radeon HD 3800 series

  I know it is supposed to be two of these listed, but there is not... Windows does not detect my secondary monitor... two of these monitors are the same and both connected by a DVI input on the graphics card.

  I've uninstalled and reinstalled the drivers several times with no progress.

  I have excluded sons and defective connectors by switching autour and he always seems to be the same screen that works on its own...

  Any ideas would be appreciated.

  Thank you

  Arthur

  Good so I solved the problem...

  Apparently, all I had to do was the eve of my machine and cut off from all power using the power bar for a few seconds until all residual power is gone, turn back on my machine and Voila!

  An easy solution for this aggravating problem...

• Directory of CUCM on displayed randomly EX90

  I have a client reporting to me that the list of directories in their EX90 appears randomly. Their systems CTS/TX alphabetical directory display based on the user ID. These EX90s are registered to CUCM 8.6.2a TX5.1.

  Someone at - it experieinced a similar issue or know a way to get the directory to view the entries correctly?

  THX,

  Rob

  HI Rob.  Thank you.  They are mine.  I imported all mine of AD.

  In any case, I took EX60 on TE6 (not yet published) and added to my cucm 8.6.2 (System version: 8.6.2.22900 - 2), and the directory is out of use.

  When I add CUCM 9 (System version: 9.0.1.10000 - 37), the directory is displayed in alphabetical order.

  I "he's double check cop.sgn files and make sure that I loaded everything that he both CUCM, but first glance, ordered (CCM9) and we're not (CCM8.6.2), on the same version of EX60 SW."

  I'll try and reload TC5.1.4 on this unit tomorrow to check on CCM 9 and CCM 8.6.2 too to see what the behaviour is.

  VR

  Patrick

• limit bandwidth telepresence Tandberg ex90

  Hello

  I have 5 ex90s.

  Location1 (L1): 2

  Location2 (L2): 1

  Location3 (L3): 1

  Location4 (L4): 1

  When ex90 in place call each other, then they can use all the bandwidth as they wish.

  When a place ex90 calls ex90 in another place, they can use only 1.5 M b & w.

  How to implement?

  Help, please!

  Hello!

  I wouldn't be that concerned by the individual links and tips. They will be automatically created for you when you make the subzones. You can get what you want in your simple deployment with just the configuration of the subzone. The unlimited bandwidth in a subarea and limit calls out of it to all the other subfields or areas.

  1: create 4 sub-zones on your VCS.

  VCS configuration > Local area > subzones.

  2: for each sub-area, create a membership rule.

  I guess that the TYPE can be subnet. So as a membership rule, add the subnet for the site corresponding to this subarea.

  VCS configuration > Local area > subzone of the membership rules.

  Subnet address and prefix length

  These two fields determine the range set

  of IP addresses that belong to this subarea.

  (Applies only if the Type is subnet.)

  Address field shows the range of

  Addresses IP to assign to this subarea

  based on the combination of the subnet

  address and prefix length.

  If you have a network at the site THAT has a network 10.1.1.0 as a C-net IP address, membership rule should be:

  Subnet address: 10.1.1.0

  Prefix length 24

  If you have a network to the TWO site that has an address of IP 10.1.2.0 as a C-net network, membership rule should be:

  Subnet address: 10.1.2.0

  Prefix length 24

  and so on...

  3: set up the limits of subzones for your four subzones

  

  As you can see, there is no need to set up the individual links and pipes, unless you want to do more advanced boundaries between your locations.

  Robert

• feature request: allows the management of mouse cursor to second display

  It seems to the measurement display option applies only your monitor screen is on the right referring first original monitor. However this is not always the case in the real world. If microsoft please give an update for us to tweak/specify this option?

  Hi Lenny Li,

  Thanks for posting in the Microsoft Community.

  I suggest you send the valuable comments from the link below.

  http://mymfe.Microsoft.com/Windows%20%207/feedback.aspx?formid=195

• Incompatibility of speed/duplex on Tandberg EX90

  Hello

  Hope you are doing well, I'm here today because I have a problem with our Tandberg based @ Zurich Switzerland.

  When we connect to the web interface, we have a troubleshooting message: "speed/duplex of Missmatch.

  I did the network speed auto, but it changes anything.

  Could you please help me?

  Often the duplex mode is auto-négocié between the two pieces of equipment; However, auto-negotiation works only if both devices are set to 'Auto '. If a device is set to 'Auto' and the other has other settings, the device of auto adapts as 100/half. The most common cause of problems of incompatibility is the scenario where a device is set to 100/full and the other is set to Auto.

  • Check the configuration of the network switch where your TANDBERG end point is connected.
  • Change the settings of the device so that the devices at each end of a cable have to be the same speed/duplex (1000/Full, 100/Full, 100/half, 10/Full, 10/half) parameters or are both set to Auto.

  Kind regards

  Acevirgil

• Windows media center on second display problem__

  I need to create a virtual TV on a connected vga tv running windows media center on dell computer inspiron laptop using a media center remote to a family member who needs simple features.

  Everything works beautifully, but gets messed up when the mouse is moved or when the pc is turned off and turned back on. restarting seems to work ok. I can put a power for always on option, I can turn off the mouse when Media center is running? How do I do that?

  Thank you in advance.

  Marty

  Hello mardito.ardito,

  No, there is not an option to turn off the mouse when Media Center is running. You can try to update the drivers for your video card and check if the problem persists during playback TV Media Center. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M5 - Second monitor does not display anything

  Hello

  I was wondering if you could help me.

  I am running windows 7 and I am trying to connect a Second display for my Tecra M5 laptop but for some reason, it detects but it won't show anything.

  What can I do?

  Can you please tell us which model of laptop do you have, what port and cable you are using and is Win7 original version of the operating system that you got with your laptop?

• "Primary display" and "Second view" reversed

  Second display problem: I use my TV as a second monitor via HDMI.  However, FCPX uses my computer as the second screen and TV as the main window.

  Is there a way to remedy this situation?

  End 2012 13 "MacBook Pro retina

  Final Cut Pro 10.2.3

  Yes.

  By dragging the application window to the screen of your MacBook Pro and making window-> show viewers on the second screen should be all you need.

  Are you saying that when you do FCP X switches the main window to the TV? I've not seen it happen, but fear not, that even in this case, there is a solution!

  Open System-> display preferences and click Arrangement. Then drag the representation of small bar menu to the internal display. Then he will designate your internal display as screen "main".

  

• How to pop the last second screen to display

  Hi all

  I have a first screen that displays the table of web service, then there are two buttons to display the next screen that displays in turn web service table, but added screen between the two spinner, so when the user clicks on the "back" button it will display spinner screen and if I replace onClose() to display the last second I need to call the web service again but on gprs network is about taking the time so current screen freezs up to answer come from web service, tryied poping current screen but no luck, so it is possible to get the last second display battery or any other alternative.

  Thank you

  Nishant Raut

  Many thanks, Jitendra.

  This works. Here is my excerpt for anyone facing this problem.

  public boolean onClose() {}
  synchronized (UiApplication.getEventLock ()) {}
        
  Screen screen is UiApplication.getUiApplication () .getActiveScreen ();.
  UiApplication.getUiApplication () .popScreen (screen);
  Screen2 screen is UiApplication.getUiApplication () .getActiveScreen ();.
  UiApplication.getUiApplication () .popScreen (screen2);
  }
  Returns true;
  }

• TANDBERG Ex60/90 display (H323) instead of (SIP) in the movi account directory.

  Hi all

  All have experience this display TANDBERG Ex60/90 (H323) instead of (SIP) in the directory of the account movi, while in tanderg C40display movi (SIP) account.

  We are now using the TC4.2.1 software and tried to restart the system.

  Best regards

  Ben

  the system is most likely not registered via sip or the default protocol is set to h323