DirectSound driver repair - code error 88780078

Similar Questions

• Re: Cd/DVD drive problem - code error 39 on Satellite P series

  Hello

  It is my first request for assistance.
  My CD/DVD drive is most recognized, and when I go to Device Manager and click on CD/DVD I'm informed that the cdrom.sys file is there but cannot be loaded.

  An error number 39 is reported.
  Any advice would be greatly appreciated, but please keep things simple to the actions of a single line if possible.

  Of course, you can get a few tips ;)
  I think you might find faster if you are looking for first in the forum, but I'll try to help you too.

  He error code 39 is very common issue and can be resolved easily.
  See this MS knowledge base article:
  http://support.Microsoft.com/kb/314060/en-us

  So first of all remove the CD/DVD drive device manager.
  Then access the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait until the CD/DVD drive has been installed again.

  That s it. ;)

• Satellite A40 - 10 - D drive: for code error is not found

  HELP PLEASE!

  I really need help to fix errors on my system.
  A few moments ago I accidentally deleted the DVD player + / optics to my laptop, and when I go to my computer, it's not here?
  The sys. tells me that the D: drive is not found, and the disc has been removed without preparation and cannot be found, error code 10.

  What this means, as I tried to update the BIOS and it didn't need, and I can't find a driver for the A40 Satellite from Toshiba.
  In addition, drivers seem to be ok and the boxes are checked in the device management, even if the optical drive has sometimes a yellow exclamation?
  Tried the recovery disc and no luck.
  Also the drive does not work now, because it does not read discs!

  Here is the Spec for the computer, as well as the summary for error messages. Reallr wouild appreciate any help on this please...

  My computer science - general

  Please wait while the information gathered...

  100% (collecting Local disk information)

  Refreshing the screen
  Specifications
  TOSHIBA
  System model: Satellite A40
  BIOS version: TOSHIBA Version 1.50

  Operating system
  Microsoft Windows XP Home Edition
  Version: 5.1.2600
  Service Pack: 1.0
  Location: C:\WINDOWS
  PID: 55277-OEM-0011903-00111
  Hot Fix: Q817606

  (Vivid RAM) memory
  Capacity: 2 GB

  Here is a list of the Dr. watson error reports that appeared the donation system.

  January 25, 2009 Service Control Manager the Application Management service terminated with the following error: the specified module could not be found.

  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.

  January 25, 2009 Cdrom driver detected a controller error on.
  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.
  January 25, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom
  January 25, 2009 PlugPlayMa swim the device ' S I t A D D - M R - 6! 1 '' ' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6! 1 '___1 #3' 423362730283321372620202020202 020202020 ___\3) disappeared from the system without first be prepared for removal.

  January 31, 2009 Cdrom driver detected a controller error on.

  January 31, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom

  January 24, 2009 Applicatio n error Faulting application helpctr.exe, version 5.1.2600.1106 failing module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.

  January 25, 2009 MsiInstall product Re: ParetoLogic DriverCure - 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command:-deletetask

  January 25, 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

  Hello

  Akuma is right. I tried to find Microsoft document about this, but somehow the old links no longer work.
  In any case, after removing the Upperfilters and Lowerfilters optical drive should be recognized correctly again and you can use it again.

• When I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Original title: Ox8000700020

  Hi, when I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Double post: http://answers.microsoft.com/en-us/windows/forum/windows_other-performance/ox8000700020/3c708968-5d37-40dc-97ef-2a44b72ca5fc

  I have merged the new post with the original question.

  -steve

• Problem with the drive mapping with error code 1312 network

  Hello guys.

  When I use the function of network with the config below card reader in the enterprise, it takes so long when connecting and finallly gave the error message

  (who needs to connect is a group of servers and we use the domain name to access)

  

  

  error message:

  However, when you use the following configuration, it could connect successfully.

  

  

  Also when using net use command line, he gave the missage with 1312 error code error.

  Do you know what exactly is causing this problem and give a solution?

  Given that we have to use the map network drive feature in our program.

  Thank you very much!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• "Your PC needs to be repaired - no code error or anything"

  Hello

  I rebooted my laptop today and got your PC needs to be repaired message but that is everything that appears on the screen, no code error or something else, literally that sentence. I have the windows CD that allows me to solve problems etc, but I have no idea where to start as a result of not having an error code. I was wondering if anyone has had or seen something similar and might help or might suggest that what I have to do in the first place.

  Thank you

  Hi Sam,

  There are several factors behind this concern. Let's see if we can address this in a few simple troubleshooting steps:

  -Press the Windows key + r.

  -Type cmd , and then press enter.

  -Type sfc/scannow , and then press enter

  -Let him finish and restart.

  Sfc/scannow command say your Windows search and replace corrupted system files.

  If this does not work for do you a System Restore. Looking to restore your PC to an earlier point in time.  (last resort)

  Feel free to update us if you need further assistance.

  Best regards.

• code error-8072

  I can't empty my trash. The operation cannot be completed because an unexpected error has occurred (code error-8072).

  Does anyone have an idea what this error code means? Or better yet, how to fix this?

  Stop

  Unplug your external devices

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Check your hard drive with disk utility

  Using disk utility to check or repair disks - Apple Support

  then empty the trash

  Stop and reconnect the devices and start normally.

  If the problem persists, check your system with AHT

  Using Apple Hardware Test - Apple Support

• Hauppauge HD PVR device not recognized / Code error 10

  From the beginning, I bought a Hauppauge HD PVR about four months ago and, to my delight, it worked flawlessly out of the box on my laptop Toshiba in Windows Vista and my laptop Windows 7 Sony. I had saved a good part of my X - Box 360 images when, one day, the device has mysteriously stopped working on my Windows Vista laptop. Whenever I plug it into the laptop Toshiba, it registers as an unknown device or with a wrong code error 10 device. Sometimes, maybe once in ten when moving from one port to another, it will come to the top and works correctly, but if I dared to turn off the computer, turn off the PVR or unplug the USB cable it immediately returns to what is not recognized / 10 state code.

  The laptop is a Toshiba Satellite A305.
  The processor is an Intel Core 2 Duo T5800 2 .00GHz
  There 4.00 GB RAM
  The display adapter is an ATI Mobility Radeon HD 3470
  I am running Windows Vista Service Pack 2, 64-Bit.

  The device in question works perfectly on my other laptop. I tried another USB cable. I uninstalled and reinstalled the USB controllers repeatedly. I tried to uninstall and reinstall the drivers, as well as trying to do multiple versions of the drivers. The device works without error on the Sony laptop, but refuses to work correctly with the Toshiba.

  Any help you could offer would be great.

  Hi ZeroAlex,

  Because you are always faced with the question, I suggest you do an InPlace Upgrade\Repair installation.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  To perform an upgrade in-place, follow these steps.
  a. close all running applications.

  b. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  c. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  a. click go online to get the latest updates for installation (recommended).

  b. type the CD key if you are prompted to do so.

  c. in the "Windows Installer" page select the operating system you want to update or Inplace.

  d. click Yes to accept the Microsoft software license agreement.

  e. on the which type of installation you want? of the screen, click upgrade.

  f. when the installation is complete, restart your computer.

  For more information, please see the link:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Once the upgrade has completed, you must activate your copy of Windows Vista.

  For more information about how to activate Windows Vista, see the following article:

  How to activate Windows Vista.

  Hope this information is useful.

• HP Pavilion 500 series: repair disk error

  Hello.
  I have a problem when I turned on my PC and it said "prepairing auto repair' followed"diagnostic PC"and finally"repair disk error, it may take more than an hour"
  It had been like this for 10 hours and I know something is wrong. Any help would be appreciated.
  Thank you.

  According to the published specifications, your PC comes with a standard SATA 3 1/2 ".

  After you remove the disk, check the capacity on the label, because there are different sizes available options when you buy the PC.

  So, no matter what another 3 1/2 "this capacity SATA drive will do.

  Good luck

• I get a region code error when I try to play a new DVD

  I just bought a new DVD of the store, and I get a region code error message.  Laptop computer wants me to change the region code before I can read the DVD.

  Regardless of your operating system go to Device Manager, go to the CD/DVD drives, click the sign more or pointer, right click on the line that appears and click Properties, then go to the region of the DVD tab.

  Now, you have the choice to make, you will see changes remaining X, the value must be 4 if it has not been changed before, if you change you will need to change it back - 3-2, if you get to 0, you're stuck in this region!

  If the specified region is yours then I would take the rear DVD, if the region is other than your, you have the choice above then you must indicate other PC users.

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Code error 8024002D

  My operating system is Windows 7 Professional 32-bit; an upgrade to Windows XP Edition family.  In addition to office 2007 Windows Update Office Genuine Advantage important Notifications (KB949810) update, installation failed repeatedly, Windows Update is up-to-date.  My anti-virus program is F-Prot for Windows and signature files are up-to-date.

  When installing a dialogue will appear asking:
  'Insert the disk "Notice 2.0.0048.0 OGA" and click OK' I don't have this drive.  When this dialogue is canceled the Windows Update poster window installation failed with error code 8024002D.

  A Google search on the code error 8024002D and a search of this forum led to perform an installation of this update.  I can't find the update in the MS Download Center to allow an attempt a manual installation.

  I would appreciate any advice on the steps needed to overcome this failure.

  Malcolm Walker

  Malcolm Walker

  Error code: 0x8024002D
  means - a full-file patch has failed because the source was necessary

  Why not see if place for Office installation media in the drive corrects the situation.

  TaurArian [MVP] 2005-2010 - Update Services

  TaurArian,

  Thank you for responding.  Good idea, but unfortunately without success.  The Windows Update Setup program could not find the file, and with a manual search OGSNotifier.msi does not seem to be on my Office 2007 installation disc.

  On the MS Website I found the OGAControl.cab file but could not work on how to install the INF file it contains.  However, from the Download Center, I reached the area of validation of the Genuine Advantage pages and facilities of my Windows 7 and Office 2007 validated successfully.

  So I hid the KB949810 update in the hope that it will be the end of this problem.

  Malcolm Walker

• Windows cannot initialize the device of this hardware driver. (Code 37)

  Windows cannot initialize the device of this hardware driver. (Code 37)
  There is no upper or lower filters in reg.
  external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
  How do I solve this problem

  Hello Rajendra Aagarwal,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

  Method 1: Run the Fixit and check

  Hardware devices do not work or are not detected in Windows (Fixit)

  Method 2: Check the steps to get the 37 error code

  Explanation of error codes generated by Device Manager in Windows XP Professional 

  Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error

  original title: Help with Media Player

  I have problems with the Media Player.  When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error.  Is it necessary to habve a network.  I have one and am wondering if I need or is it why extraction will not work?  I don't know where the network came, but if I need it how to remove it

  Hi Nanabarb,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the format of the files you are trying to extract?
  3. do you get an error message?
  4. the problem occurs with any particular drive?

  I suggest you to see the following links to make sure that the check-out settings correct. You don't have to be on the network.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Extract music from a CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Rip music: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

• Video card driver displays an error message after reformatting computer with Vista

  I reformatted my computer using windows vista and I kept getting an answer that the used copy was an illegal copy of windows. In the meantime my computer was working fine. I called Microsoft and they verified that it was not an illegal copy and gave me an additional code to activate windows. After activation, my image of the screen became smaller with a border of 1 inch black around the screen (I have a widescreen monitor). I tried to correct this problem and have discovered that my video card driver has an error message saying that windows has stopped this device because it has reported a problem. I tried to reinstall the latest version of the driver, update to windows vista and tried all the suggestions that have been proposed on the microsoft Web site, and it still doesn't work. I reinstalled everything again with the same problem. Can you please help me solve this problem. Thank you.

  Video driver problem

  Hi Skyler16,

  Please see the article below with some initials/troubleshooting information:

  http://Windows.Microsoft.com/en-us/Windows7/video-cards-frequently-asked-questions

  If you need further assistance, please specify the brand and model of your computer and video card.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think