"Your PC needs to be repaired - no code error or anything"

Similar Questions

• Get the error Code: 0xc000000d and your PC needs to be repaired.

  * Original title: Error Code: 0xc000000d

  Hello, I have Windows 8, and at random, I had projected blue and the computer reset and now I have this message on my computer when I try to start it

  Your PC needs to be repaired

  The Boot Configuration data file is missing some required information

  File: \Boot\BCD
  Error code: 0xc000000d

  You will need to use the tools of recovery on your support of instillation. f you do not have any media (such as a disc or usb device) please contact your system administrator device

  I can't pass this screen please help. The only disc that came with this computer is a reinstallation DVD.

  Hello

  Please follow the steps mentioned here and see if they help you:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• Envy DV7 HP: HP DV7 Envy your PC need to be repaired a required device is not connected

  I have 10 Windows on my HP DV7 envy.  When I turn it on I get the error "Your PC need to be repaired a necessary device is not connected."

  None of the keys work, which means I can't select startup options or select System Restore.  It just brings back me to the blue screen with the error message. So I can not try all options, I found on the internet that are made not boot master book or disable secure boot record.

  I ran the tests of memory and fast disk, as someone else suggested that memory may be bad.

  (HP please don't answer back Windows 10 is not supported.)  Microsoft has given to all customers of Windows 8. Besides it is not at all compared to the question, since the system cannot not even load the operating system.)

  I fixed that basically like this:

  1. safe mode in the bios
  2. change the boot order to put USB in the front
  3. Install Ubuntu from USB, so erase Windows

  I got stuck because I had copied the Ubuntu ISO was not a complete file.

  No doubt I could able recover if I asked HP ship me a replacement disc for Windows 8.1

  Also, I learned that you press f8, f9, f10 or f11 when you turn on the computer.  You must wait until the screen goes to sleep again and repower the computer to switch to another option.  Now key people will work until you do this.

• Laptop HP 15: Recovery - your PC needs to be repaired error: 0xc0000225

  Hello

  I tried C drive partitioned using the easy Partition Manager. It asks for a restart and after a reboot it ask for recovery.

  I had also created the USB bootable for windows 7 and tried to recover with the recovery drive. I said authentication fails.

  Hello

  If you try to start Windows 7, you must first change some setings in the bios as follows.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the Windows 7 installation Flash Drive and the laptop shutdown .

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the Flash Drive (uefi) option and press ENTER.

  Kind regards

  DP - K

• HP Pavilion X 2: recovery - your PC needs to be repaired a required device is not connected or is not accessible

  After installing Windows 10 PC is on an infinite reboot cycle, I tried the system diagnostics and it meets the test. I also tried to change the BIOS set up but nothing seems to work and it keeps restarting now. After restarting 3 times, it shows that the installation of Windows and it shows that it is 64% before restarting and this cycle keeps repeating.
  
  If there is a solution that I would be grateful if it is to be provided for me.

  Thank you for your help

• your pc needs to be repaired Help!

  How can I save my pc without cd or usb tools_

  Hello

  See if that helps you.

  "How to access the Windows Advanced Startup Options 8 or 8.1"

  http://pcsupport.about.com/od/Windows-8/a/open-Advanced-startup-options-Windows-8.htm

  "How Boot for advanced Windows 8 Boot Options and 8.1" . "

  http://www.eightforums.com/tutorials/4935-startup-options-menu-boot-Windows-8-a.html

  There are also detailed here.

  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  

  ______________________________________________

  And please read this method:

  "How Boot for"System Recovery Options"in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  

  See you soon.

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• BCD needs to be repaired Windows 8

  Hello

  I am trying to solve this problem, a few minutes ago, I walked into the installer of Windows 8 by USB and he said that he could not install the disk and repair.

  Now if I try and come back in the USB bootable he launched just up an error saying:

  Recovery

  Your PC needs to be repaired

  File: \Boot\BCD

  Error: 0xc0000098

  Now looking at these errors we just said to run the recovery media. I try and I just get the error again and again recovery screen.

  I moved the USB at the top of the boot order and tried to manually switch to it, just reocvery error page every time!

  Help! His work the laptop!

  Hello

  If it is a fairly recent machine, it probably uses UEFI BIOS...

  If this is the case, you might look for some type of selection for the flash drive UEFI BOOT instead of simply select the USB port...

• First aid found corruption that needs to be repaired.

  "First aid found corruption that needs to be repaired. To repair the boot volume, run first aid of recovery ".

  I installed Sierra but first aid called the El Capitan 10.11.3 volume.

  Where is the recovery?

  your really

  Baffled

  If you are in recovery mode access disk utility from the drop down

  On OS X Recovery - Apple Support

  then fix the volume

  https://support.Apple.com/kb/PH22243?locale=en_US

  otherwise if you are on OS X utility can be found in

  Macintosh HD/applications/utilities/disk utility

• Need to claim for HP Code connected

  I have a HP Photosmart 7510 and need to get a claim code to use connected HP

  The instructions are clear nod

  Hi Hahli,

  I see you are trying to print to your Officejet 4500 using your iPad.  EPrint does not support the printer you listed.  You use the mobile ePrint?  The mobile app ePrint can allow you to print to this printer.

  HP ePrint mobile application

• The configuration of your Pc startup data is missing or contains errors: 0x000014c error code

  Hello

  See if any body can help here... I get this blue screen:

  ************

  RECOVERY

  Your PC needs to be fixed:

  The Configuration of your PC startup data is missing or contains errors.

  file:\\EFI\Microsoft\Boot\BCD

  Error code: 0xc000014c

  You will need to use the tools of recovery on your installation media. If you do not have any installation media (like a disk or a USB device), contact your system administrator or the computer manufacturer.

  Press ESC for UEFI firmware settings

  ******

  First of all, I could enter option 11 and run the factory reset, I was so happy because I thought it won't be easy... but then after I did the factory reset... I get this blue screen. If I press ESC I get into this next screen:

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  ENTER - continue starting.

  This is what happens when I click on one of these options:

  F1, I enter the system of information without any problem, then I click on to continue and return to the screen last... so I press F2 and super, I'm able to run the Test of memory and hard drive check 100% without any problem in one of those who, after that I'm done with my tests I press exit and I'm back to F1 , F2, menu etc... now I want to try F9, F10 or F11. disappointment in this option 3 I go back to the blue screen described at the beginning of this post. (I already plug in a USB key with a bootloader, which works perfectly)

  so I can't do anything, nothing at all! crazzines.

  So what I did to check why I can't enter BIOS or at least to boot from my USB... I removed the lid of my laptop botton and removed the hard drive and is then, how I was or I am able to log in the BIOS - I made the changes to start USB first, then the HD and that's how I was able to boot from USB - BUT if I connect the hard drive back I'm not able to enter the BIOS or boot from USB - so basically I'm stuck in this blue screen and I can't boot from a USB key, if I connected HD... I can't use any option... no BIOS, nothing... So yet again, I disconnect the HD.

  This is one:

  HP ENVY Sleekbook TS 4

  If you can't access BIOS with the HDD connected, you certainly won't be able to start on the recovery USB. This is indicative of a failing hard drive.

  Install a new drive hard and then start on the recovery key.

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• The location where the windows update stores data has changed and needs to be repaired

  I couldn't down the updates for the month. I ran attach it to microsoft, but he told me that the situation has changed and it needs to be repaired. Someone knows how to do this?

  Hello

  Did you change your computer?

  Have what fixit you tried?

  Method 1:

  I suggest you to follow the links and check out them.

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I need to unlock compaq mini code is CNU027599F, please help

  I need to unlock compaq mini code is CNU027599F, please help

  Try to ashes.

  e9l17xqoo8

  3rd letter tiny L.

  4th is number 1.

  7th letter lowercase Q.

  8th and 9th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• I try to install photoshop elements 14. In order to get the serial number, I need to enter the redemption code. But it keep saying the redemption code I entered is incorrect.

  I try to install photoshop elements 14. In order to get the serial number, I need to enter the redemption code. But it keep saying the redemption code I entered is incorrect.

  Hello

  Would you share your redemption code in private message please?

  Or

  Please contact Adobe customer care http://helpx.adobe.com/contact.html

  • Be sure to stay signed on the page with your Adobe ID.
  • Select your product and what you need help with
  • Click on the blue box "still need help? Contact us. "

  Kind regards

  Sandrine