DirectXInput stops at Midway

Similar Questions

• MacBook pro starts the process but stop before midway lights

  HI -.

  My MacBook Pro starts the boot process but stops and stops before reaching the point to halfway. This can be the result of something that I did yesterday, I disabled my MacBook during a software update. I don't know what has been updated.  (I've left for a few hours and would not leave my computer on while I was out.)

  Is there something at home, I can do to fix this?

  Thank you!

  If you do not know what has been updated, nor do we. Could have been a critical system component. Try to start in Safe Mode and see if that clears up the problem. If this is not the case, start in Recovery Mode, select disk utility and make a disk first aid. If that doesn't work or you can't get into Recovery Mode, then try Internet Recovery Mode, while the Mac is connected to the Internet (press Command + Option + R) so it starts off Apple servers and reinstall OS X. If all goes well, you won't lose too much data.

• Recovery MAnager does not - stops at Midway

  Hello

  
  

  I'm trying to restore my HP Pavaillion to the factory setting. I insert the disc of recovery manager supplied with the computer. However, he never goes from 44 percent complete. On the contrary a read error '1005 error if the problem persists, contact HP support' is displayed. (See attatched photo). How can I fix it?

  Additional information:

  The reason why I'm trying to restore my PC to factory settings, it is that is no longer able to boot. For some time I could start through the Windows 7 disc, but now I can't do same.

  Additional information:

  If it is possible to fix my computer without restoring to factory settings, that would be great I have a certain number of files it contains. The computer stopped booting all around the period I, 1) update Norton 360 and 2) installed Tablet Intuos Wacom. Notron 360 caused earlier problems with my PC (Blue Screen of Death by updating Norton 360) but I don't know if it's the cause again now. This could be the Tablet, as I played around with the settings (specifically, I changed these services automatically start Manual [Service of stylus, Tablet PC Input Service, Wacom Touch Customer Service] and I also have desselected features Windows Tablet). I did this because the Tablet has been rarely connected to the computer, but the processes that have been continuously running despite the fact that the tablet was not connected, (when we look in the Manager tasks) used a lot of memory. If you think that one of the two above (Norton or Wacom) causes, let me know and I will send you more information.

  If not for now, I guess I would say goodbye to all my files and default factory settings - IF HE WOULD ACTUALLY restore instead of give 1005 error messages.

  Thanks for any help

  

  Uncanny101 wrote: Hello, I have been unable to find the functionality you're talking about. This is the screen that appears when I press F10, select Advanced. I'm looking in the right place?

  

  Hello Uncanny101, the recovery restore partition may have been deleted. If it did, you wouldn't be able to use the F-10 or F - 11 key to access.

  You should be able to perform a new install with a Windows 7 disk, if there is no hardware failure.

  Just insert the Windows 7 in the optical drive and start the system. When you get to the place where you are asked where to install the operating system, look at the bottom of the page and you should see the partition. You should see two partitions, one of 100MBs more. Let the small partition of 100 such MB, because it contains the Windows 7 installation files. Select this option to remove the larger partition, and then create a new partition, quick format the new partition to continue.

  This should allow you to install a fresh Windows 7. You lost all the data you have added since you have the system, but because the installation failed, these data are probably already lost.

• What to do when your Apple TV movie rental stops at Midway?

  We rented a movie last night and about 13 minutes, it was freezing everything simply.  We waited a long time and finally gave up and watched something that the Apple TV would actually deliver. We went back tonight to try to watch the rest of the film, but here we are, about half way through, and it stops again. We were 'suspended' for about 12 minutes now and nothing do us seems to help. If we try to get out, told us our rental period is up, so basically if we the film release, we will have to pay for another rental observe this rest.  And, how many times do you think we will have to go through this to come at the end of 2 hours, 8 minutes movie?  That is what it is?  What should do?    Thank you.

  It could be a network problem

  What is your current connection via speedtest.net

  Make sure that DNS is set to automatic (network - general - settings)

  If during testing of wifi Ethernet

  Test on another network

• OfficeJet Pro 8600 analysis stops at Midway

  With the help of a relatively new in Officejet Pro 8600 on my iMac with OSX Mavericks.

  Printer is set up wireless, printing works fine. Scanning did too, until yesterday.

  When I scan a document through HP application scanning, or Mac "scanner" that appears in the Printers window, the printer is now the noise, the status bar starts and then stops. It does not move. I left it like that for hours, just to see what happens, and when I come back the job has been cancelled.

  Wireless connection is obviously good, as I can print and even when scanning printer responds immediately. It just isn't really complete - or even apparently start - the scan.

  Any idea of what is the cause? It seems that this could be a faulty machine.

  Thank you!

  Hello vertov,.

  Welcome to the Forums of HP Support!

  I'm sorry to hear you're having this problem with your 8600 scanning. A quick way to determine if your printer is having a hardware problem, make a copy.

  If the printer can make a copy, it is not a problem with the hardware with the scanner from scanning. If a scan failure is present on the printer, try looking in the steps detailed here: A 'Scanner failure' Message is displayed on the printer control panel.

  Also it is better to have the printer connected to a wall outlet directly for power, this will help you understand why: issues when connected to an uninterruptible power supply/Strip/surge protector power.

  I'll come back and get your answer.

• Download music Info stops at Midway

  One of the features I like about Xperia phones is the Walkman SenseMe. I got another phone Xperia in the past and there been no problems of data download music. On my Z3, however, the download goes to halfway and the error "Unfortunately download music Info has stopped working" message. Help!

  TS made so far was to clear data and cache on the Walkman app and several reboots.

  The phone is not rooted or anything, so no DRM lost forever question.

  Not that I think have an impact on the application, but I have a number of albums by Led Zeppelin of high resolution, and only after that I copied them on the map the Phone is become apparent.

  So I tried to delete the songs of high-resolution files and tried to re-download info music. Just as a suspect, they were files that are SenseM.

  I hope that Sony will push upupdates to help make SenseMe work with hi res flac. After all, hi res reading is one of the strong points of the Z3.

• Zebra tlp 2824 more impression not more a label appropriate, then stops at Midway

  Zebra tlp 2824 more impression not more a label appropriate, then stops at halfway. I use a POS system to generate labels for the shelf tags. I have used other models of printers zebra, but he won't cooperate.

  Hi Robbie,

  To help you with the problem, you can refer to the message of Mohammed Raieed here.

  Let us know how it goes. Thank you.

• Copying files to a USB drive stops at Midway

  Hi I have a windows 7 (Home premium 64-bit) Laptop drives and two USB ports (a Kingston 16 GB data traveler and another 4 GB Cruzer). I also have an XP laptop. On the XP laptop, I can use the two USB drives to copy files of any size. Both are partitioned NTFS.

  But on the win 7 laptop only cruzer 4 GB works without problem. Whenever I try to copy a file to that drive 16 GB from win 7 playback starts without problem but stop somewhere between the two. It does not shortly after. I tried a number of solutions, including a fix suggested in this forum and still having the same problem. If I copy a file very small (a few MB), she can finish to copy without any problems.

  Can someone please.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/38f25c1d-de67-4C74-8845-2cd3a15d8e41/

  Please try the fix mentioned in this thread and see if it solves the problem. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Automatic text flow stops at Midway

  I'm trying to put a Word Document and have the auto-enchainement, adding new pages to accommodate the entire manuscript. I threaded text frames (two columns) set up on my master pages. It starts ok, threading text on facing pages, and then the automatic flow stops in the same place every time. It is only about a tenth of the text of the manuscript. I tried to save as a file .rtf, but exactly the same thing happens. Here is a screenshot of the area of the Word document containing, with a red arrow, where the traffic stops. Any help would be greatly appreciated.

  

  Open history in story editor (Edit > edit in story editor...) and check the text immediately following the indicator of excess. Something in this first bit of the text is the problem. Common problems are long chains with No Break applied, nonbreaking spaces and disabled hypheantion or values of left and right of withdrawal too large for column width.

• InDesign download stops at Midway

  InDesign creative cloud download stops at halfway, at 42%. I'm online with no problem and I have quit and downloaded again and it stops at 42%. Any ideas?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Why windows media player stops at Midway through burning a cd

  Recently I tried to burn a cd using windows media. Two weeks ago, everything was going perfectly, but for some reason any, I tried several times today and as soon as the cd is 99% complete a message box appears on the screen saying that Windows media player has encountered a problem and needs to close. So I tried repeatively three times with three different CD and I also rebooted the computer, verified that the version I have is updated and I am full of ideas. I don't want to uninstall the program, unless it's my last option or it will surely solve the problem. So if anyone has experienced this problem or maybe something close to this help please me I would really appreciate it.

  Hi Jay,.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Method 1
  I suggest you to perform the following troubleshooter.

  Open the Windows Media Player DVD Troubleshoot utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Method 2
  I suggest you to change the settings for burning in Windows media Player.

  Change settings for burning a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  See also: Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Hope the above information helps. If the problem is not solved please get back to us and we will be happy to help you

• I very photoshop elements and premier 11 items this morning and download stopped at Midway

  How to I bought product to download

  Have you tried the cancellation and resumption of download?  You can find more information about your Adobe bought http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQsoftware download.

• "Stop IMAQ" takes 10 sec to run and consumes 100% of CPU

  Hi, I'm calling IMAQ stop to put an end to an acquisition, but it consumes 100% of my CPU and takes 10 sec to complete (all your 100% CPU).  In our application, we have start and stop the device regularly, and that's exactly when the user wants the program is interactive, if this delay of 10 seconds is great irritation to them.

  My setup is - camera scan online Dalsa Piranha, RT 9 running on a desktop PC (it is compatible according to the test), PCI-1429 cameralink map.

  Any help or comments welcome.

  Thank you.

  Ah, I managed to solve it, but first, here are the answers to your questions:

  With the help of Stop and then close or simply close makes no difference.  The judgment takes so long that I just used a probe before and after on the cluster of error and with function of probe of 2009 timestamp I could easily see how long it took.  For a more detailed analysis of the time I use the United States available with RT timer

  Anyway, the way I solved the problem was ensuring that I stop acquisition BEFORE the clock of the camera line is stopped.  So stop IMAQ probably wait for the end of the current frame before returning - and if the clock of the line stops at Midway through a framework (as was the case), a timeout of 10 seconds causes probably Stop back later.

  The clock of the line is powered by an acquisition of data (via RTSI) card and I simply closed the session to this counter after calling IMAQ stop.  Data acquisition interface is not displayed in the example above, as it is coded in an another vi.

  Thanks for all the help.

• DeskJet 9800 stops halwfay

  Kind regards!

  It's frustrating that there is no real solution from HP for the same problem (the same problem in many models). I use a deskjet 9800, win8.1pro 64-bit. The main use of this printer is for the DAO, and every time that you try to draw a map, simply stops at Midway and remains frozen for about 2 minutes and ejects the paper. In those two minutes the printer assumes that work s

  I tried to reinstall the printer several times, make some adjustments to the configuration of the printer, installed in another computer, but everything seems unnecessary. Moreover, isn't it funny that in the official website of hp, the driver is not available.

  Any help will be appreciated

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=438326&swItemId=dj_128044_1&swEnvOid=4158

  Hello! INTROVERT.

  Thanks for your quick response. I did what you told me, and unfortunately at the beginning the problem continues. As my last option, I also changed the original USB cable for a new and connect the printer to a different port USB (3.0).

  After doing all the steps, finally the printer started to work properly. I really don't know not which of the steps (software or hardware) solved the problem, but actually runs well.

  Note: I'll do the same thing on my hp Desingjet70, hoping that it works also (the same problem with that one).

  Once again, thank you for your cooperation.

• Laptop stops shortly after the start.

  I have a slight puzzle on my hands. I was working on a DV5-1012EA which had a damaged palm rest/touchpad. I found a replacement and very well equipped. I had the laptop works well and decided to run windows update. Everything seemed fine, but after a reboot (which seemed normal after a windows update) it was decided to close. I tried a few reboots but no joy.

  I then used a recovery disk but it was in the middle of the second "loading files" and he stopped.

  I ran the diagnostic test of the system via the ESC menu and fine tested memory, it stop at Midway through the HARD drive test.

  I tried to boot up a Linux live disk with no HARD drive, but once more, it has failed.

  I booted into the BIOS, but after 3 minutes it stop new

  I tried different hard disks and memory, but it makes no difference. The system just stops.

  What a coincidence it occurred after the Windows Update? I changed the material so any conflict caused by the update wouldn't be here.

  I can't think it is overheating of the CPU or GPU, and that is why he stops? Maybe all the work of dismantling the until that replace the touchpad/palmrest dislodged the thermal/thermal heatsink paste?

  Please can someone advise me because I want to make this thing run again and return to my friend?

  Thanks in advance

  Changy

  Hello

  Yes, as I mentioned in my original post, I booted into the BIOS, but it turns off after 3 minutes. It's what made me suspect overheating. It was very quick to stop if open windows, but slower with the BIOS that requires less work CPU.

  I have removed the radiator and check the thermal paste. I'll remove it and use the new thermal paste just to be sure

  Thank you

  Changy