Fixed - Network, to Macronix MX98715 chip necessary adapter driver

Similar Questions

• Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  I did everything to prepare for the upgrade. The Upgrade Advisor says it all right. But I get the message that this network adapter is a problem. It does not appear in device menager even under hidden objects, so I can't uninstall or update.

  It is obviously a problem for more than two years. Why is there not a difficulty now, or at least a well validated response that meets this situation rather than simply repeat the statement to execute the Advisor (done) or update the driver (which is impossible because the card network can not be found)?

  Hello

  You can try these:

  Step 1:

  a. click the Start button.

  (b) in the search box type devmgmt.msc and then press ENTER.

  c. find under the "Mobile Devices" "Microsoft USB Sync" node. If this is not present, proceed to the next step. Otherwise, right click "Microsoft USB Sync" and choose "Uninstall".

  When you connect your USB phone, it should appear in the device under Mobile Device Manager. Education invites you to look out there and if you find Microsoft USB Sync, uninstall it. If she is not there, go to the next step.

  Step 2:

  Disconnect, and then reconnect your device. Your device driver will be re - install and launch Windows Mobile Device Center.

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Network adapter driver does not work with the recovery discs provided by hp

  Hello

  My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.

  Here is the hardware ID. Please provide a link to the drivers:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Thank you

  You are the very welcome.

  It does not sound like a heat problem.

  I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.

  I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.

  To do this, disconnect the laptop from the AC adapter and remove the battery.

  Insert a rod through the air fan to keep the blades turning when you spray air.

  Spray through the air intake fan and watch to see the dust out of the exhaust.

  Repeat once or twice and blow air from the other direction of the drain line to the fan.

  The other driver, you need is the driver of protection Protectsmart hard.

  See if it works.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

• No puedo instalar hardware device VIA Networking Technologies Cardbus PCI Wireless LAN Adapter para W7, so alguien tiene driver is lo agradeceria

  No puedo instalar hardware device VIA Networking Technologies Cardbus PCI Wireless LAN Adapter para W7, so alguien tiene driver is lo agradeceria.

  El driver worked well with Windows XP, upgrade to pero al hacer a W7 me da problemas, visit el sitio oficial, pero no tienen el driver para Windows 7.

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)

  http://support.Microsoft.com/common/international.aspx

• Network Adapter Driver Model DV6 - 2173cl

  I had to reinstall Win 7 Home Premium 64 Bit due to a virus problem.  I have re installed all the drivers for the model of this site.  I had no problem until the network adapter driver.  Under other devices in Device Manager, I have 3 yellow exclamation points, starting the NIC and 2 lower than unknown devices.  I tried several times to delete the drivers and re - install with the chance to know.  Any help would be greatly appreciated!

  PCBS

  You are the very welcome.

  Here is the link to the other driver that interests you:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5273547&sw_lang=

• ESXI how to install the network adapter driver

  Hi all:

  My ESXI5.5 has been installed, but find that the network card can not be identified, how to install the network adapter driver.

  Thank you very much

  Hello

  Follow the VMware KB for the installation of the NIC driver, hope it helps.

  VMware KB: Cards not detected on a host ESX ESXi network

• Xbox 360 Wireless network adapter driver

  I am currently using OS of Microsoft Windows 7 64 bit on my computer. When you use the adapter wireless Microsoft Xbox 360 with the drivers provided by Microsoft, Windows recognizes 5 'axis' and 10 'buttons '. Windows axis recognize are: X rotation, rotation Y (right stick), X axis, y-axis (left stick) and the Z axis is left and right triggers. My question is about the Z axis and the Guide button. Why the two triggers control the same Z axis? Also, why can't assign the Guide button to function? This driver provides Microsoft does not allow to link triggers to 2 different functions and use these 2 functions at the same time (for example: for while fire) because the left and right triggers neutralize! Having the left trigger that the right and rotation Z fire as Z axis (or left trigger button 11 and right trigger button 12), as well as assign the key Guide key 13, you need to uninstall the (UN)? supported Microsoft Driver for the adapter Xbox 360 Wireless and replace it with a written by a Japanese man named Masahiko Morii. Why? Why Microsoft doesn't have a Xbox 360 wireless adapter driver that is configurable to assign the Guide button to function? Why don't they have a driver that is configurable to assign the left and right triggers to 2 separate lines? Why can I not pay the linearity or sensitivity of the dead zone of the controller with the MS driver? Why can not I have 4 lights on the controller flash or rotating with the Microsoft driver, and yet I can with Masahiko Morii driver? The 360 controller is great, but how is it, Microsoft makes bad drivers for it when you use it with your PC?

  Hello

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  With the help of the joystick Xbox 360 for Windows
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  Set up your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

  Troubleshoot your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  For most of the problems of Xbox:

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• HP 250 G3: BSOD - netr28x.sys (MediaTek 802.11 Wireless Adapter Driver, MediaTek Inc.)

  I recently bought the HP 250 G3 without OS laptop.
  
  I installed Win 7 pro 64 bit and all the missing drivers, which now seem to be up to date.
  I made my machine run all night to check synchronize files on dropbox and google reader, but this morning, I realized crashes BSOD occurred 9 times.
  
  So I download WhoCrashed which identified the main cause of the system down to be:
  
  netr28x.sys (MediaTek 802.11 Wireless Adapter Driver, MediaTek Inc.)

  WhoCrashed strongly recommend checking the updates for this driver.
  Can anyone suggest me how to upgrade?
  Thanks in advance.

  I fixed my problem 8.1 WIndows installation on my laptop.
  I have not had any crash since I installed it, which was 5 days ago.
  I gather that some drivers HP for Windows 7 dindn can't work properly.

• Microsoft Virtual WiFi Miniport Adapter driver problem

  Hi guys,.

  I have a problem with the Microsoft Virtual WiFi Miniport Adapter, see the image below, please help,

  all the best, bluesfloyd,

  

  Hello

   
  Thanks for posting your query in Microsoft Community.
   
  1. what exactly is the problem you are having with your system?
  2. What is the brand and model of your system?
   
  Microsoft Virtual WiFi Miniport adapters are hosted wireless network drivers that assist in the virtualization of a physical wireless adapter in more than one sometimes referred to as Virtual Wi - Fi virtual wireless adapter. If your system gets an update for Microsoft Virtual WiFi Miniport adapters and you get an error Code 31 in Device Manager, it means the device has no a way.
  Error codes in the Device Manager in Windows - 31 of the Code
  http://support.Microsoft.com/kb/310123/en-us#31
   
  Please try these steps and check if the problem persists:
   
  Method 1:
  Run the hardware troubleshooting tool.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us?EntryPoint=lightbox
   
  Method 2:
  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  2. in the list of hardware categories, find and develop network adapters , select the device for Microsoft Virtual WiFi Miniport Adapter driver you want to update, and then double-click the device name.
   
  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
   
  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information is useful. If the problem persists, please post back with your results for further assistance, we will be happy to help you.

• Microsoft teredo tunneling adapter driver

  On the control panel devices, I need drive device for a teredo tunneling adapter microsoft. When I left difficulty device driver, it fails.

  Hello

  ·         What exactly are you trying to do?

  ·         You will remember to do recent changes on the computer before this problem?

  If you try to update Microsoft teredo tunneling adapter driver. I suggest you follow the steps mentioned below:

  Method 1:

  You can check after uninstallation and reinstallation of the teredo tunneling adapter Microsoft and check if the problem persists. Follow these steps:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  "d. in r to manage devices, expand click right network adapter on" teredo tunneling adapter Microsoft ", click"Uninstall"and click"OK".

  Restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 2:

  If the previous step fails, update of teredo tunneling adapter microsoft and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

  There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  The device information Name: Microsoft Teredo Tunneling adapter ID: ROOT\ * TEREDO\0000 Error code: 10 Reinstall the device driver Completed There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.

  Problem with the PnP devices Detected

  There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.
  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.

• HP Pavilion HPE h8-1111: Deffective Network Connection (802.11n WLAN Broadcom adapter) - defective or software hardware

  I lost my network connection and I don't know where to go to fix it. If anyone has an idea where ho to continue, I have tried so many stage already that I am at a loss... Help

  My computer semi regularly acted by the loss of my internet on a whim. Basically, it can detect WIFI, no problem, shows the strongest signal for her also. just tells me that it cannot connect to WIFI when I try (even if he can ask me the password and can tell if I use one bad)

  I can't reprocude the question

  No significant changes to my computer because the issues started happening.

  Simple steps:

  -Recovery (before the first event) system does not alter

  -Router and modem are not the issue

  -Could you find not updated driver anywhere (even though this does not mean that they do not exist, but having only no internet with the pc makes it particularly tricky - also HP does not provide the )

  -Power management wasn't the question

  -J' tried forget network the many times this problem has occurred. He has not fixed it.

  Additional troubleshooting showed:

  -Reset the Winsock Catalog did not resolve the question more than once (emplying he did the first time I did).

  -Reset of TCP/IP, that does not solve the issue more far.

  My WIRELESS card is a Broadcom 802.11n

  Finally, the only thing that I can see (although I can easily miss something obvious) is my reinstallation of an old printer inkjet EPSON Workforce 545, which I am connected to my WIFI and my PC via USB (why I used wifi since I got cable?...) I do not know) a few days later, people who use the same network reported the act more as usual but I have not noticed anything on my end.

  -J' have been disconnected from the network to the printer and stopped using it.

  -J' found evidence of his feature wirless allgedly interfere with other devices here (search for entitled Review "bought two units for corn or work")

  http://www.CNET.com/products/Epson-workforce-545/user-reviews/

  -Usage guide also mentioned the possibility of non-zero of the interferingwith printer wireless (end of p.328) other devices:

  chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/https://files.support.epson.com/pdf/wf545_/wf545_ug.pdf

  Edit 12/04/2016

  I ended up having to do a factory reset on my computer for unrelated reasons. To reconnect the original WLAN card, I don't have to use the USB adapter that I bought to solve my problem.

  Factory reset works if fails everything else! Solution without after all!

  Hiya

  Well I'm really ideas, I have revised the HOW2 and he is shown below, just in case it helps.

  

• Qualcomm Atheros QCA61x4 Wireless Network Adapter driver 12.0.0.116 gives a slow speed.

  I bought aspire V3 - 574 G-54VY a month back. It runs on windpws 10 64-bit. There is a problem with the Qualcomm Atheros QCA61x4 Wireless Network Adapter. Whenever I update the driver to version 12.0.0.116 I face extremely slow internet. But when I go back to the previous version of the driver 4.0.0.115 i.e., the speed is correct. Can someone help me with this issue, because I'm not able to determine whether or not I have a defective laptop. The center of same service replaced the wifi card, but always the same question comes up. Thanks in advance.

  Hi guys Finally I found the problem with the help of a technician

  The problem was with power settings. When the laptop is plugged in, he took the full speed and slow battery mode. The solution is:

  Goto settings-> system-> power and sleep-> additional power settings-> settings of plan (plan selected)

  OR

  Search for Goto-> type Control Panel-> hardware and sound-> Power Options->-> change the parameters of the plan (plan selected)

  Then

  change power settings advance-> adapter settings-> power saving mode-> Set battery maximum performance wireless

  Check your speed now (if necessary reboot)

  I am now using the updated driver 12.0.0.191 and internet high speed is correct.