Disable the hotkeys during execution?

Similar Questions

• change the frequency of the signal during execution

  Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is

  change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls

  someone help me I tried to put in an event... but no use... maybe iam missing something pls help me...

  I noticed that you have some time a loop around the entire block diagram - I'm not entirely sure why that is.  The way you have your VI wrote that the two inner loops will never come out unless there is an error-'stop' buttons are hidden.  Thus, the outer loop is not do anything for you.

  Once you take it, it is easy to see why you cannot change frequency.  It is defined once, outside of the loops and so never gets checked again.  The best way to resolve this, in your case, is to use registers with shift on the upper loop and check if the value of the frequency has changed since the last iteration.  If so, generate a new waveform and feed DAQmx writing instead.

  See the version annexed to your main VI for what I mean.  (I also replaced the controls to stop with one that is visible and which will stop the two loops without your duty to hit the button abandon.) I'm also an error on the DAQmx read in the loop at the bottom, but I'm sure it will work fine on your equipment.

  See you soon,.

  Michael

• Pass the value of the variable during execution

  Hello
  
  I have a package with a set of interfaces and three other variables.
  
  I want to pass the value of the variable at runtime, based on the value passed I want to decide which interface to run then. How can I do this? I got a set variable but I want to asssign the value during execution.
  
  Any help is greatly appreciated.
  
  
  Thank you
  San

  You have many options to achieve this goal.

  1. keep the run settings in the database, extract the Variables in a time of refreshment and use these variables in your Interfaces to get values of execution.

  2. change the value to the variables on the outside. You can declare a variable in a package as a step of the statement, and then use the variable in your interface in a successive step in your package. Then, create a scenario of your package and creating the scenario, it will prompt you to include the variables that you want to include as a startup parameter. Choose the one (s) concerned. Citing this scenario using Java or an OdiStartScen command or by using Webservices ODI externally, you can provide values of the runtime as a result.

  I hope this helps.

  Concerning
  A

  Published by: 922636 on August 29, 2012 23:53

• definition of the background image of the file during execution

  So, I have another issue to resolve and my migration to 11.5 will be complete.  In the previous iteration, the project has been able to set the background image from an external file dynamically during execution.

  After the migration, it seems that the projector keeps the canonical path to the image of Member and looking for him there. In other words, loads of projector, but a file finder opens, saying: he cannot find the background image in the path of the source machine Director.  Setting the name of the file in the jargon does not stop this behavior doesn't happen.

  I tried to re - import the image as "link to external file" (which had the same results) and flat import (which does not load the file during execution, even if I put the file name in the jargon).

  Anyone know how I can do this, the value of the background image of a file during execution?

  Thanks in advance!

  I do it all the time.  Just make sure that the image is in the same location relative to the projector that's director file.  The easiest way is of course if the image is in the same folder as the .dir file, in which case, you'd sure as to put it in the same folder as the projector, and you can set the name of the file using:

  Member ("someExternalMember"). FileName = the moviePath & "filename.jpg"

  You can have it in subfolders as well if you want to make sure that the relative location is the same.

• Edit/delete/add scene coordinates in the table during execution

  Hello world

  I managed to build table allows you to store and record the coordinates of the stage and remind to control steps. However, I need change/remove/add details of scene during execution. I also need to allow the user to directly edit the coordinate from the scene of the array. Wondering what someone knows what is the best way to do it? Or is it better to use the matrix or Cluster? Thanks in advance.

  Best regards

  Han Yen

  Han Yen wrote:

  Thanks much altenbach for all the advice. I tried to do a table 2D control. I've been playing with table in the control. However, I still can't find out how can I detect that I change the data in the table 2D with the more recent issue during execution? How can I then update my current table with the latest data?

  Well, the 2D table is updated immediately and you do not all the other tables.

  Do you mean that you want to update XAbs, etc. where the just changed line is already selected?

  In any case, here's a simple project, perhaps it will give you some ideas. I would recommend using also the tables for XYZPos, entrances etc. and the XYZabs. This simplifies the code because you reduce the number of terminals and table operations.

  Let me know if something is not clear to you.

• How to disable the driver during the boot process?

  Hello

  I have uninstall a printer from my computer, but when I restart my computer during the process sometimes a back pop up windows and require a response at the prompt of the printer driver I uninstall, but this statement was not disabled or deleted.

  How can I access the startup file to change?

  Thank you

  Hi Reyes,

  Restart your computer and start pressing on the keys on your keyboard. On a computer that is configured to start to multiple operating systems, you can press on the -key when the Boot Menu appears. On the Advanced Boot Options menu, select Disable the Driver Signature Enforcement press .

  

  This will disable the drivers at startup.

  Hope the helps of information provided.

• Problem with pl/sql procedure, trying to get the value of the user during execution

  Hello

  Using oracle 11.2.0.3

  Can run sql that gets the value of the user during the fine workmanship and also via an anonymous block.

  uses of SQL & Enter_Product_Number

  anonymous block using: Enter_Product_number.

  However, get problems when trying to create a pl/sql procedure, use one of the above

  relevant below tried code part & and: buit works do not error, try bad bind variable if used: and ora-600 if try use &.

  How can we have a procedure from pl/sql that can call and receives a value of user during execution?

  Only way around what I can think of is to pass parameters to the procedure

  Thank you

  create or replace procedure ins_into_issues is

  v_nd_rec_cnt number (10);

  v_normal_rec_cnt number (10);

  Start

  Select count (*)

  in v_nd_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & old_nd_product_number;

  Select count (*)

  in v_normal_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & normal_product_number;

  -code below commented above works.

  end;

  Hello

  what something like this:

  create or replace procedure INS_INTO_ISSUES ( in_normal number, in_old number )  is
    v_nd_rec_cnt     number(10);
    v_normal_rec_cnt number(10);
  begin
      select count(*)
        into v_nd_rec_cnt
       from refmast.issues i
       where i.iss_product_num = in_old;
    --
      select count(*)
        into v_normal_rec_cnt
        from refmast.issues i
       where i.iss_product_num = in_normal;
  end;
  

  concerning

  Kay

• Filter the Table during execution and keep uncommitted line changes

  Hello

  I have a requirement which has been quite difficult for me so far.

  I use the first version Jdev 12 c.

  I have a table of AF that is connected to a ViewObject that is used for sending new data.

  When I add lines to this ViewObject, I put a field that I intend to use for filtering so that the number of lines is not displayed at the same time.  This field comes from a selection of LOV.

  I want to be able to change lines are displayed in the table based on what is the current value of selection LOV.  This isn't a problem for me, and it works perfectly using a view criteria and a variable transitional EO I put in place.

  My problem is that when I select a new value in the LOV and change to bind the variable view criteria, I want all changes uncommitted to the lines to be preserved in the View object.  Currently, the lines are not keep their changes, and I need to do this, because after that the user has entered data for a large number of lines, there will be a commit to the database for all new lines added.  Is this possible or should I look for an alternative?

  I also tried to use a table filter in the link of the page layer, but I get an error that I can't debug. It is marked as Houston-34014.  In this method, I try to access my bean in pageFlowScope to filter the table.  This bean variable is updated when the LOV selection changes.  Error messages settings are {0 = oracle.jbo.Key [-220-225], 1 = root}.  I also read that this filter parameter is a static filter and does not dynamically during execution.

  Any help would be appreciated, thanks for reading.

  Hello lhymel

  I think that your problem is solved, so please close this thread and open a new thread for tuning related problem

  Thank you

  -Ashish

• Adding series to the table during execution?

  Newbie :-)
  
  I'm trying to add series to a chart during execution because the number of series to draw is variable and only determined once the XML of a HTTPService returns...
  
  My chart looks like this:
  
  < mx:PlotChart id = "mainChart" showDataTips = "true" width = "100%" height = "100%" >
  < mx:series >
  ...
  
  If I add:
  
  < mx:PlotSeries xField = "Size" yField = "CompetitorPrice" displayName = "Competitor price" / >
  
  then the data plots OK, but try to create the same AS serial does not work (nothing appears):
  
  var newSeries:PlotSeries = new PlotSeries();
  newSeries.xField = "size";
  newSeries.yField = "CompetitorPrice";
  newSeries.displayName = "SeriesAddedAtRuntime!"
  mainChart.series.push (newSeries);
  
  Debugging presents the new series added and it seems OK... but it does not appear on the graph. No errors.
  
  I tried mainChart.executeBindings (); and mainChart.validateNow (); with no chance, but I guess as to what is to be the case here, as you can probably!
  
  What Miss me something to force an update of the chart with the new series added?
  
  Thanks in advance
  
  John

  It is not displayed because the table is not aware of the change in ownership of the series. I think that to run the following steps (give an or take a few syntax errors):

  var set = mainChart.series;
  var newSeries:PlotSeries = new PlotSeries();
  ...
  Series.push (newSeries);
  mainChart.series = series;

• Turn off the screen during execution of operating system

  Hello
  Is there a way to disable the display of a Toshiba L300 19 f while the system works (plays music for example)...?

  Thank you.

  Of course you can do it.

  I do not know what power profile that you use, but if you use the balanced power plan type parameters and sets Turn off the option to display for 1 minute.
  I do the same when the laptop is running and when I want to listen to my favorite online radio station. I put it at 1 minute.

• How to disable the speaker during the phone call IOS9

  Several times I made a call on my iP6 (IOS9) and tour on the speaker so that others might listen/talk.  Unfortunately, the sound quality was so bad that we could not understand the other person, so I decided to turn the speaker off. and continue with the phone to my ear.

  Never could understand how do.  I've been preoccupied to kill the phone call if I did too.

  Press the button that you used to activate the speaker during the call, if necessary

  It will bring up a menu of all the devices, you can send the call at that time - bluetooth, car, iPhone

  You can choose whoever you want and call hovers over seamlessly

  (1189)

• CS5 with OpenGL: is there a way to disable the 'inertia' during the movement of the window?

  Hello

  Following a change in hardware, photoshop automatically reactivated a feature I had disabled, the OpenGL acceleration.

  I gave up on it 18 months because of one thing that irritated me incredibly, the crazy 'inertia' ago when we moved elements.

  Let's say you have a document open. The image is too large for your photoshop window, you will see a part of it.

  So, you keep the key space is, and you just drag and drop your left click of the mouse.

  Without openGL acceleration: the movement ends as soon as you release your mouse button.

  With the openGL acceleration: moving it gradually slows down until it comes to an end, which means that you have zero control over your working window.

  And well, that's enough of an annoyance for me to renounce the OpenGL acceleration.

  Please, do you know if there is a way to get rid of this feature? I've looked everywhere I could, I think I tried each of the options of photoshop, but without success, unfortunately

  Thanks a lot if you can help

  Kind regards

  Clear the check box to activate panoramic Flick in preferences > General

• disable the button during process execution

  Greetings!  I have a situation where I have to click a button 'Submit' on a page and does not allow the user to click the button again while the process of the page runs.  How can I DΘsactiver the button after it is pushed and not activate the button until the page is complete?  There must be a way to do it with a dynamic action, but I did not understand a way of doing.

  Thanks in advance!
  John

  Hello

  How can I DΘsactiver the button after it is pushed and not activate the button until the page is complete?  There must be a way to do it with a dynamic action, but I did not understand a way of doing.

  It would be pointless to let the user to wait until process finish so the user can continue to interact with the system. If it is a long process so I suggest that you use the process in the APEX of long-term management

  on the other

  Simply create DA who fires on the event "before submitting the Page" and in Action, choose section "Run JavaScript Code". The code you need to add is:

  apex.widget.waitPopup();
  

  Thank you

  Benjamin.

• How can I disable the screensaver during video playback in full screen?

  Hello!

  HTML5 is great and hopefully get rid of Flash as soon as possible.
  That said, something still bothers me when I play HTML5 video (YouTube for example): the screen saver is still as I am full screen.

  Y at - it a config that I missed or is this a bug in Firefox?

  (I use Archlinux with GNOME)

  See:

  • bug 517870 - video must disable screensaver during playback

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• Is this common practice to disable the password during repair?

  My iphone screen 6 of s is cracked and I booked the genius bar yesterday to arrange the repair.

  The genie asked me to disable "Find my iphone" for repair. I understand this point of view and do.

  Then, he asked me to turn off the password too. Is this normal? I don't want to reinstall all applications after repair so I do not clear my iPhone, so I feel extremely dangerous for this practice.

  Does anyone have a similar experience?

  Thank you

  Here is what Apple has said about it:

  Until you get the service for your iPhone

  Your content is important, and you will need the backup to restore your iPhone after the service. Apple could remove the content on your iPhone during the service process, that you bring to your carrier, take it to an Apple Store or post.

  Before putting in your iPhone, save it
  Before you send in your iPhone, follow these steps

  If your iPhone has a SIM, remove and keep your accessories and adapters - do not send them with your iPhone.

  Once you receive your replacement or repair iPhone, transfer your SIM to the iPhone and turn it on. You can configure it as you would for a new iPhone or restore your content from your backup.

  copied from answer Service Center - iPhone

  Before putting in your device

  Follow these steps before entrusting your device to an Apple Store, carrier or Apple authorized service provider. If your device turns on or answer, complete the steps as much as possible:

  1. Back up your device.
  2. Have your Apple ID password . For repairs, you will need password your Apple ID to erase your device and turn off Find My iPhone.
  3. Bring your invoice if possible, in the event that your service requires a proof of purchase.
  4. Bring your camera and accessories that you need help.
  5. If you haven't already done so, call to check if you need an appointment before go you to a service outlet. For example, planning a Genius Bar reservation before going to the Apple Store.

  

  Before sending your device

  Do the following before sending your device in repair or replacement. If it not turn on or respond, complete the steps as much as possible:

  1. Backup of your device.
  2. Tap Settings > Messages. Turn off iMessage.
  3. Erase your device: tap Settings > General > reset > erase all content and settings. If requested, enter your access code and password Apple ID.
  4. Make sure that the locking Activation is disabled.
  5. Remove the SIM card, case, or your device screen protector and keep your cable and charger.

  Now, your device is ready to send. If you have arranged a service request, you should have received instructions on how to mail in your device. If you do not have instructions or if you have not set up a repair request, contact The Apple support.