Disable the message of 'transfer the data to the SD card.

Similar Questions

• How to disable the sound card internal on Satellite P300-156

  I bought SB X - Fi Notebook Card.
  Configure the card as default sound card after the installation, but after the reboot, the system do internal sound card by default.
  How can I not disabled the onboard sound.
  In the Bios there is no option to turn it off.

  Help

  Hello

  You will not be able to disable in the BIOS.
  These sis not available in BIOS setting!

  You can try to disable the sound card in Device Manager!

  Mark the sound card in Device Manager and disable it!

• How to disable the sound card in BIOS - Satellite M40?

  Hello everyone,
  I can't find "Pref. material" in the BIOS to disable a sound card on my Satellite M40-289. Please, step by step help?

  Hello

  As far as I know the unit has a phoenix BIOS. Am I wrong?
  I don t think you will be able to disable the sound card functions in the BIOS.
  If you want to disable the sound card so do it in Device Manager.

  But I have a question. Why it is so important for you to disable the sound card?

• How can I disable the "gift card $500" message when I open Firefox?

  It seems that whenever I open firefox, a banner will appear at the top of the page offering a $500 gift card business. I have to close it every time. Is there a way to disable this message?

  is opening firefox

  Sounds like Malware.

  Install, update and run these programs in this order. They are provided free for personal use, but some have limited functionality in "free" mode - but these are the features that you really need not to find and eliminate the problem you have. (Not all programs to detect the malware even.)

  Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  SuperAntispyware - http://www.superantispyware.com/
  AdAware - http://www.lavasoftusa.com/software/adaware/
  Spybot Search & Destroy - http://www.safer-networking.org/en/index.html

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:
  http://www.spywarewarrior.com/index.php
  http://Forum.aumha.org/
  http://www.spywareinfoforum.com/
  http://bleepingcomputer.com

• Extensa E470 (E5400): disables the graphics card the internal graphic module

  Hello! Hoping to get a dual head configuration, I installed a graphics (NVIDIA GeoForce GT630) in my Extensa E470 (E5400). The new graphics card works OK, but it disabled the internal graphics (Intel GMA X 4500). Is it possible to get the system to allow for both at the same time?

  Hello.

  It is not possible to disable disabling only when you have 2 internal graphics card you have the choice between them.

• I disabled the sound card that I think and I can not allow it now. Windows Vista Edition Home Premium / Fujitsu Lifebook A series laptop. No other changes made recently.

  Apparently, I disabled my soundcard by rt clicking on the speaker icon in the status bar on bottom screen rt system. Then I deselected the output device and selected the option helmet on the reading tab. I am getting no sound using headphones or my internal speakers. Now hovering above the "speaker" icon says no audio output device is installed. On the reading tab, I now have only the headset option. I have changed nothing. I use Windows Vista Home Premium on a laptop Fujitsu Lifebook series A. helping, please? THX.

  Thx for the help, in my particular case uninstall the sound card and then restarting solved the problem. It's a much simpler solution. THX Tho!
  Howlin'

• Satellite A100: Is possible to disable the graphics card, RAM sharing

  I am using a Satellite A100 and no option for this in the BIOS. Maybe I forgot something?

  No, this is not possible.
  Everything is controlled automatically and the value of memory will be assigned automatically if necessary.

• How can I disable the fast cards?

  MAC OSX 10.8.2

  Read this article, it will show you how disable or remove.

• T61 (7659-D22): disable, remove, or replace the WWAN card?

  My T61 (7659-D22) la Sierra Wireless to Verizon, but I have no Verizon or another data plan. What is I can disable the Sierra card so it is not sucking power? I can remove it without the machine complaining? Is there a more useful map that I can install in its place?

  Z300M wrote:

  I thought the turbo memory card, but the general opinion seems to be that it doen't considerably improve the performance.

  I questioned myself. My conclusion is the $50 I paid for mine back in 2008 was more then the advantage he gave me, but you can buy much cheaper chips now, so if you are on vista or seven with a disk sata hard, then it will provide improved performance, as a reduction of the reads/writes to disk, extending its life. Which of course is not something you can see or feel in daily use.

  I use the turbo memory in my system with the exception of a couple that I have installed SSD drives.

• How can I disable the onboard sound card in BIOS on the Equium A200

  I use an external Creative Sound Blaster sound card, but the recording level is very low and were advised by Creative to disable the onboard sound in the BIOS but there is no option to do this. Can anyone help?

  Hello

  You can not disable it in the BIOS.

  If you want to disable the sound card, you can do it in the Device Manager!

  see you soon

• disable the internal microphone

  Lenovo x 201 2985 F4U

  is it possible to disable the internal (built-in, integrated, whatever it's called) microphone on this unit? I have not been able to find a way without disabling the whole card.

  You can probably disable it in the bios, under Security, access port i/o. or in windows via Control Panel, sound, recording, select microphone and disable.

• Can't point Karma on the SD card

  I searched and found 2 links that looked like, they can be answers, but the links were dead.  I took my old phone "Sanyo" SD chip and he was going to transfer my address list to the Karma that I just bought.  When I insert the card, I get a short message that says "memory card" and displays the available memory.  I looked for a while to find a setting that will point to the card, but cannot locate the address book, music, or photos.  Seems it should be pretty simple, I just don't find that.

  AT & T has instructions on its website to transfer your contacts.  I just used it to transfer our Nokias to our new Karmas.  The wizard begins to http://www.wireless.att.com/support/copy-contacts.do.  You have just to choose the manufacturer and model of your phone, then do the same for your new.  He will then spit illustrated instructions to copy the contacts through.  This means, in effect, transfer to your new SIM card.  The trickiest part is getting the card on Karma; they did not only an easy task at all.

  First of all, you can take the SIM out of your Karma.  Put it in your old phone.  There, you must copy all the contacts to the new SIM card.  (After watching the manufacturers available on AT & T website, I see not Sanyo.  You know how to copy contacts from that device to the SIM card before you can follow the instructions below).

  Replace the SIM on your Karma.  After having fed up, click on the main Menu.  Select address book, then press the Center button.  Press Options, then scroll to the bottom and select "Select Multiple to." highlight "Copy SIM to Phone" and select this.  Click on Options.  Select "select all".  Press 'done '.  When asked to confirm that you want to copy all the, select "Yes."  This will move all contacts from your SIM card from your phone.

  Note that after this, you will see two copies of each contact, because the phone is you showing that on his record and on the SIM card.  You can disable the SIM card if you do not double.

  There are also instructions to move contacts to and from SIM card of the Karma that is located at http://www.wireless.att.com/support_static_files/manuals/Motorola_Karma.pdf.  Go to page 18 of this PDF, and it will tell you how to move the contacts of the SIM power on and off.

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• turn off the graphics card for hp Compaq dc 7800

  I installed a nvidia quadro fx 580 graphics card, but I want to activate the built-in vga card and disable the nvidia card to switch between maps

  In virtually all models of HP desktop PCs, when a video card is lorsqu' une carte video est installee installed the integrated video processor is disabled.

  What you are asking for is only in laptops high-end as switchable graphics. Also, there are with some motherboards UEFI DIY very recent for desktop PC and is called hybrid graph

  I hate to bring bad news, but it is unlikely to be an option with a lower end PC productivity as your dc7800.

• 17 t j000 touchsmart forcing skyrim use nVida video or turn off the graphics card intel

  Hi all

  I just got this new computer and try to make it work with the game Elder Scrolls v Skyrim   the game starts and runs ok however by default is of poor quality with video intel detected 4600.   Don't want to use the video intel when even, so no matter not much.  I want to use is the video card from nVidia to 740 m.

  I went into the NVIDIA Control Panel and things together global use the nividia card, in program files, I put all the exe files of the game to use the nvidia card.   I entered skyrimprefs and sd3ddivice to change sD3DDevice = "Nvidia GeForce GT M 740" when I start the game it resets the video at the bottom and when I look at his still trying to use the card intel.  The skyrimprefs file is more written with sD3DDevice = 'Intel (R) graphics HD 4600'.

  So the question is how to get the game to work with nVidia card?  Or how to disable the card intel?

  Went into device manage and disabled the graphics card intel and skyrim can't always find the nVidia card. It uses Microsoft basic pilot to return instead.  A difference that I noticed is the base of Microsoft driver it will default the video quality of average quality rather than low quality I get with the 4600 built in processor video card.

  PROBLEM SOLVED

  I was running enb and needed to use the version of the injector instead of the version of wrapper.  the file d3d9.dll in the wrapper version forced things to use the graphics card intel.