disabled bluetooth. No mouse, keyboard, trackpad how to ACTIVATE

Similar Questions

• My wireless network card is disabled, and I don't know how to activate it.

  My wireless network card is disabled, and I don't know how to activate it. I have a laptop HP Pavilion Dv9000, which originally had Vista but I installed XP Professional on it. According to Wefi all I had to do is click Start and then click on connect to and right-click on wireless connection and click Activate. My problem is when I click on start... There is no connect to click the button. Anyone know where I can find my connect button?  Thank you!!

  Hello

  Try changing your preferences in the start menu.

  Click with the right button on the task bar > select Properties > start menu tab > and make sure that this Start Menu, menu classic start no is selected. Then check to connect to.

  Or, go to control panel > network connections. Find your wi - fi adapter and right click, select Enable.

• Laptop HP TS with Windows8 - how can I disable the touchpad mouse?

  Just got this phone yesterday so there is no way to disable the touchpad mouse and it is just in the way I have to hold my hands to a heavy of angle to not activate. I put the answer as long as it allows, but for some reason any does not allow me to disable the stupid thing. HELP Please!

  Hi @kewlbloos

  Welcome to the HP Forums!

  This is a fantastic place to find answers and solutions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you would like to know how to disable the touchpad in Windows 8.  Here is a link to help you with this.

  HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8). Please note the section on a TouchPad and ClickPad activation in Windows 8.  In the diagram, you will notice the disable button you can select.

  Good luck!

• How can I change the sensitivity of the Mouse microsoft bluetooth 5000 mouse

  How can I change the sensitivity of the Mouse microsoft bluetooth 5000 mouse

  With most devices microsoft mouse, with the last installed, R.click software/drivers
  my computer, properties, Bishop of devices, expand the tree, R.click the mouse on it, properties,
  Advanced button, set the two senior settings is listed, a superior is probably
  enough. This makes the most sensitive mouse settings.

• How to disable the on-screen keyboard when windows starts... _

  I want to disable the keyboard on the screen of my startup because it slows down the speed of my boot, I tried different things, but I can't yet find a solution... so please help me disabling

  You can prevent the Visual keyboard facilitated access to automatically
  > starts when you load Windows by disabling "use on-screen Keyboard.
  > box on the page "Use the computer without a mouse or keyboard" in the
  > Ease of access Center. (Open the Control Panel, click ease of access, click on)
  > Ease of access Center, and then click on the computer without a mouse or
  (> keyboard.)

  See you soon. Mick Murphy - Microsoft partner

• How to change the mouse keyboard and mouse wireless in one click?

  Original title: How can I change the mouse to a single click? more it is difficult for an older person with arthritis.

  I would change the mouse keyboard and mouse wireless in one click. I have windows7. with windows xp, it was part of the accessibility options, but I can't find this option now. Any help would be appreciated. Thank you

  Hi knufyn,

  I certainly understand your concern and I will be happy to provide the steps to check if we can change the settings click on the mouse.

  Let us, perform the following steps and check if you are able to change mouse click settings.

  By default, the mouse is configured to use the double-click to open an item (single click to select) in Windows 7. To configure the mouse to use the single-click to open an item (point to select) setting, follow these steps

  un) Click Start

  (b) type appearance and personalization in the start search box, and then click appearance and personalization in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c) in appearance and personalization, click on Folder Options.

  d) in the general tab, click single-click to open an item (point to point)

  (e) click apply and click OK.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Re: How to disable bluetooth on Satellite C660

  I have a toshiba satellite c660 laptop and windows 7(32 bit) is installed on it. Recenntly I installed the utility on this following drivers

  (1) Bluetooth Monitor - v4.07 for windows 7
  (2) Bluetooth Stack for Windows by Toshiba - v8.00.03 (T) for windows 7

  Bluetooth works fine but the problem is when I right click on the bluetooth system icon and select Disable bluetooth function, it turns off (turns red) a few seconds and turns on again automatically. I don't want to keep my bluetooth on all the time I want to turn it on only when I need it.

  so is there a way by which I can toggle the bluetooth to my will?

  any help will be appreciated.thank you

  Hello

  Usually, you can disable and enable the Bluetooth functionality by using the FN + F8 key combination.

  Try this!

• How to disable the right mouse click in the application of the ADF

  Hi Experts ADF,

  JDeveloper 11.1.1.7.0

  Is there any way in ADF application we can disable the right mouse click. This should work in all browsers.

  Thanks in advance.

  RS

  Hello

  I tried to code below. Who worked for IE and Mozilla browser.

  document.addEventListener ('contextmenu',
  {function (e)
  e.preventDefault ();

  },

  (false);
  document. OnMouseDown = disableclick;

  status =
  "Right click disabled";

  function
  {disableclick (Event)}

  If
  (event.button == 2) {
  Alert (Status);
  Returns false;

  }

  }
  

  Thank you

  RS

• SPI keyboard/Trackpad on MacBookPro12, 1 does not work after 10.11.3

  I'm having a problem where my keyboard and mouse are not reset after the awakening from the sleep after the update to 10.11.3. I'm on MBP12, 1. I can plug in usb or bluetooth devices that work but the keyboard and trackpad work until after I have shut down and restarted.

  I see the following error in the logs:

  11/02/16 11:32:41.000 AM kernel [0]: error: internal Apple keyboard / Trackpad::IssueMessage has not published the bus error message: 0xe00002eb

  11/02/16 11:32:41.000 AM kernel [0]: error: internal Apple keyboard / Trackpad::setPowerState AppleHSSPIDevice: peripheral resume in Power we failed with error 0xe00002eb

  I have reset the pram and smc, run again the 10.11.3 combo update and run the utility disc to my hard drive. None of them have solved the problem.

  Has anyone else had a similar problem or found a resolution for MBP12, 1?

  I have exactly the same problem. Have you found a solution in the end, kcculhwch?

• Flex 2-15 keyboard/Trackpad stopped working

  Basically the keyboard/trackpad are no longer works for my lapop (Flex 2-15).

  Here is the race to the bottom of what I know:

  (1) function keys still work like the brightness upward or down before turning off the screen.

  (2) in the Device Manager it is the yellow traigle with an exclamation for the trackpad, but the keyboard driver seems to work properly.

  (3) on the mouse driver, it says Code 10, has expired.

  (4) I tried to uninstall the mouse driver and restart to see if windows would be to install automatically and the pilot comes back, but with the same code 10.

  (5) touch screen works very well.

  (6) running Windows 8.1.

  (7) I tried restore factory settings and the problem is still there.

  (8) keyboard and USB mouse work perfectly well.

  (9) switching modes I tried to see if keyboard/trackpad has been disabled, but no luck there either.

  Really appreciate some help here because it of beyond frustration since I didn't have this laptop for a little over a month and can no longer return. Also, Lenovo does not support anything else than the material and wants $70-140 to solve this problem.

  Thank you!

  
  

• disable the on-sreen keyboard

  How can we disable the on-screen keyboard?

  At the same time on your keyboard, press window key + U , and then click use this computer without mouse and keyboard.

  Carey Frisch

• Bluetooth wireless mouse

  I recently bought a mouse came with a wireless dongle Bluetooth wireless.  I have Windows Vista SP2.  The dongle is installed properly (sometimes), but other times it seems do not install - in other words, when I remove the mini-usb stick and replace.  The mouse worked regularly, but it seems that when the computer sleeps and wakes - the "generic bluetooth radio" is reported in the device as Manager does not.

  Device displays the error "generic bluetooth radio" Manager 43 (Windows has stopped this device because it has reported problems).  The pilot is made by Cambridge Silicon Radio Ltd.  The device ID is VID_0A12 & pid_0001 & REV_1915.

  Another thing, I noticed too strange, is I also have a Microsoft Wired USB mouse I was using before this bluetooth installing mouse.  They seem to be related together somehow.  When the MS USB mouse is in place in the USB port, Bluetooth mouse seems to always work/install/unsleep.

  I am at a loss.  There is a patch from MS for this type of thing past with windows 7 - but not vista from what I can tell!

  Also, I used the Windows Event Viewer to determine the file it's the slightest error on East: BTHUSB. SYS.

  Hello

  Norton is known for this issue, so using their removal tool was a good shot. AVG
  is also known to have caused strange problems so I uninstall it and run the AVG
  Removal tool.

  AVG removal tool
  http://www.Avg.com/ww-en/download-tools

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ===============================

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps.

• Mouse & keyboard does not not after waking from sleep

  This problem started about 6 weeks ago, and I've exhausted all remedies except that maybe a Win update caused the problem with updates of November.  It only would be not the first time a Win update caused a problem.

  I am running Win 7 Professional 64 bit, 3.4 processor concert image, 16 gig RAM and 24 concert page file.  This occurs only when everyone is connected and puts the computer in "sleep mode" all connected, and that includes letting go the computer in mode 'sleep' a timed framework, or by using the command Win to sleep or Sleep.com.  It does not occur when you cold start, warm boot, or log off and then put the computer in standby mode, and that includes using the key on the keyboard, programmed to the Sleep.com or Win command.  In these cases, everything works fine even wake up the computer when it is disconnected.

  If I put the computer in mode 'sleep' while connected and then when I press a key or move the mouse, the computer will wake up and I get the login screen since I'm protected by Word.  The lights on the keyboard light (wired 4000 natural ergonomic keyboard) and the light on the background lights of the mouse (Wireless Mobile Mouse 4000) so I know the two USB ports are powered.  However, when you press any of the keyboard to type in my password, it does not display what I typed and the mouse cursor does not move. Both are totally insensitive.

  Short reboot, the only is to unplug the USB cable from the keyboard as well and the mouse receiver, wait 10 seconds, then reinsert them.  When I do that, everything works as it should.  It is a pain in the back since both are on the back of the computer.

  I tried using different USB ports, mouse & keyboard Centre of the reinstalled several times, checked all drivers, run ' sfc.exe/scannow"which doesn't show any problems with the system files and Device Manager has assured times checked to allow them to turn on the computer and made sure any setting relevant to the USB ports or peripheral interface that have the option to"Allow the computer to turn off this device to save power"are disabled.

  This is of course only related to someone to be connected, because it works very well when that I disconnect.  This tells me that's not the BIOS, as suggested by older discussions.  If it was the BIOS, then there is a problem when you do a cold or warm boot.  Also, I have the BIOS configured to recognize all USB devices when starting and not only ports keyboard or mouse.  The reason for this setting must be my hard drive to backup (USB 3.0) available at startup.  I checked everything I can think in the registry and can't find anything that could cause this.  I have hibernate off (never use it and it uses 10 GB of disk space for the file), and the implementation of the options for "USB selective suspend setting" is set to off.

  My solution is as follows: I disconnect, and then put the computer on "standby".  When ready again, I have simply to move the mouse, type my password, and Windows opens with the mouse and the keyboard works as it should.  It takes a little longer to wake the computer if it was put in mode 'sleep' when you are connected with the exception of the time and the hassle of having to unplug the mouse & keyboard, but I don't have to jump through that hoop to make it work.  Up to 6 weeks ago that this computer was fine with the same exact material because there now.  In the night, I just put it in "sleep" mode when connected from the computer has a task in Task Scheduler that wakes up the computer by running the insomnia (to keep him awake for backup) and backup programs runs, then shuts down the computer when finished.  This works because I do not use the keyboard or the mouse as I SLEEP.

  I would be grateful for any suggestions!  I'm a user for more than thirty years (even go back to the PMO for those of you who know what it was), built my own computers for years, so I can handle everything that needs to be changed.  It intrigued me, and I don't have very often coming up with computers.

  PROBLEM SOLVED!

  I thank very you much for working with me and remember to do things.  Sometimes techies like us, as they say, 'can't see the forest for the trees' If you know what I mean.  It's like the authors of the software manual do sometimes in that they assume you already know the steps has a B, and they begin to step C.  Sometimes it is more obvious that we see because we are looking for something more complicated.

  I had already tried another keyboard and a mouse, and I thought some time ago, I did a clean boot, because I know that can open the door and where is the problem.  If I did, I forgot or did not find the problem.

  I apologize for him accusing Microsoft of having caused the problem with an update, but I've had this happen before and thought that it had happened again.  It turns out that it was a software problem, but not here where I thought it was.

  After doing a clean boot and noting that the computer and the mouse worked after the return of the mode 'sleep' with a clean boot, I knew there must be something to load into memory and showing in the notification area.  The only things I had done in the six weeks was to add a quick Weather Channel.com Weather app and I had exchanged and received my new SkyCaddie.  It is a portable device that shows the yardage, etc. on the golf course.  The SkyCaddie uses a program called CaddieSync Express that allows the device to communicate with the web site to download updates of the course, the software updates, etc. scores.  The version of the program used on my old unit had a problem after I unplugged in that when you open Internet Explore nothing would show - no communication with the web.  I had to sign out and then sign back in and then fix it every time.  It seems that in this new version the problem has been resolved, but they have created a new.

  By default, the program loads into memory and the icon appears in the notification area.  When you connect the SkyCaddie using its USB cable, the program recognizes and prepares to synchronize.  The problem with this new version, is that even if you do not use the synchronization program, this is what prevents the keyboard and the mouse works correctly.  It must focus on a USB hub even if you do not use.  The solution was to go to the configuration of the system to prevent this program from loading at startup, it placing a shortcut on the desktop and then clicking this shortcut to load the program prior to attaching the SGX.  I then let him do his thing, and when it's over and I disconnect the SkyCaddie from the USB port, I close the CaddieSync Express icon. and then when I put the computer to sleep and then wake it up, the keyboard and mouse work fine.

  I knew that I had installed the new CaddieSync Express all the time, this problem started, but I never thought about it because he had never caused this problem before the cause of the problem.  Trust me, they will receive a call from me tomorrow so that I can tell them that the problem they cause.  Remember what I said in the first paragraph.  They would not yet be aware of the problem, and maybe after I speak with people of their software, they'll send an email informing the owners of this problem until they get it fixed.

  Now, since systems vary so much, including how are managed USB hubs, this can occur only in rare cases.  I came just to be one of these.

  Thanks again!  Perhaps some of these other people who have posted in the forum who had the question keyboard & mouse will read this thread and it will help them solve their problem.

• MPB 13 early 2015: keyboard, trackpad stopped working

  Hello

  I am currently (not quite happy) owner of a Macbook Pro 13 "retina, early 2015, I bought about a year ago.

  After a few months of use, the keyboard and the trackpad started to behave erratically:

  • Sometimes the trackpad may stop working.
  • At other times, it is the keyboard that wouldn't work.
  • But most of the time, the keyboard and the trackpad would be lacking.

  A few observations:

  • The question would appear only when I start the computer, or when he wake up from its sleep.
  • When the keyboard and the trackpad has decided to work, they have worked perfectly until I put the computer to sleep or shut it down.
  • Trackpad and keyboard work as expected.
  • Initially, the problem would appear only from time to time, but then he began to be more frequent to the point where the keyboard and the trackpad would never work.
  • During the first week little encounter the problem, plug an external USB device, such as a USB drive, managed to move things to the top and the keyboard/trackpad would raise from the dead. Alas, once the problem became permanent, nothing seems to fix.

  What I have tried or verified:

  • I did tried to reset the SMC, NVRAM nothing helps.
  • Boot in single-user mode or failsafe don't change anything.
  • I did check for misbehaving kernel extensions and found nothing. All extensions of kernel in use are Apple.
  • The problem is not related to the installation of third-party software - the set of installed applications is quite small and rarely changes.
  • Hardware diagnosis do not have any problem report.

  The problem became really annoying that I had to tote around an external keyboard and the trackpad - sentence a satisfactory 'solution '.

  I ended up going in an Apple store, where I was recommended to send my machine for repair in a 'Premium' authorized Apple service center. This service center could not find the question

  (Apparently hit answer by accident)

  This service center could not find the problem, and they ended up replacing all of the top folder (including the keyboard and the trackpad). It was less than three months ago.

  Initially, it worked flawlessly... until a few weeks ago, when he started to raise its ugly head again. Just from time to time at first, but now, I'm at square one, with a keyboard and trackpad completely non functional.

  A few interesting notes:

  • Again, I have reset the SMC (using the internal keyboard) without success. I want the SHIFT, control option keys and press the power button. Light on the magsafe plug changes color for some time, which indicates that the MSC has been reset indeed. In other words, the system correctly detected that user have pressed the shift, command, and option keys.
  • I then tried to reset the NVRAM. But not the operation fails. Once the computer is on, it seems that the keys are not yet detected. Same thing if I try to boot in single user mode or failsafe. I can only do it by using an external keyboard now. Starting in integrated security mode shows me some cute photos asking me to activate my bluetooth keyboard and trackpad.

  Let's take a look at system.log.

  When the macbook, boots or wakes up from his sleep and find the interface for device series, we are greeted with a message similar to:

  21/05/16 22:49:27, 000 kernel [0]: Apple keyboard internal / Trackpad::start successful start

  These are the days of beau. However my logs are now filled with messages from the AppleHSSPIController. As I write this from another laptop, I can't paste the log messages

• S50-B-15N issues satellite keyboard/Trackpad / function key - win 10 improvement

  I bought a Satellite S50-B-15N a few months ago, who came with Windows 8.1 and decided to do the upgrade of Windows 10 about two months ago. Initially, the laptop worked well but in recent weeks, he had various issues with the keyboard, trackpad, and function keys.

  Keyboard: Sometimes the laptop starts up and the keyboard detects no input. A few reboots solves the problem. If I hold the BACKSPACE key to delete several characters as a single character is deleted on one-click Rollback, I can't keep him down quickly delete several words.

  Trackpad: The same for the keyboard sometimes at startup it works everything simply. I have to use the keyboard to access devices Manager where I must get back the driver trackpad for her to start working again at the next reboot.

  Function keys: All the keys of the row from the top on the laptop (brightness, volume, stock selection, etc.) do not work. I am able to hold the "FN" key and select an F key, like F5, but other keys are completely insensitive.

  I tried reading the forums for solutions and I went to the page of the driver of Toshiba and installed all the drivers for Windows 10 for my laptop, so far, nothing has worked. Is that what I can do to make the laptop works properly with Windows 10?

  I have a similar problem. I had the same Toshiba model and bought in August. Not sure when the new driver will be released. If anyone has an idea how to solve this problem?