Disabled the SATA in the BIOS by mistake and will not be able to access the BIOS

Similar Questions

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry

• I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

  I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

  If it still shows paper jam and you know that there is no paper, just turn it works, and it should realize that there is no paper.

• just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  Vista Home premium 32-bit

  Hello

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ABon the Defender being turned OFF

  With MSE installed Windows Defender is supposed to be disabled.

  MSE has been designed with its own version of Windows Defender under its own program.

  If the two were running, it would cause system conflicts.

  See you soon.

• My iMac crashed and will not trigger upward.  I bought a new IMack.  There is no way I can I disable the Deluxe Suite CS3 on the machine 'dead '.  My Apple notebook has been stolen and had the second CS3.  I just can't disable and reactivate the CS3 on th

  My iMac crashed and will not trigger upward.  I bought a new IMack.  There is no way I can I disable the Deluxe Suite CS3 on the machine 'dead '.  My Apple notebook has been stolen and had the second CS3.  I just can't disable and reactivate the CS3 on the new machine.

  If you see an anomaly of counting activation, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.

• FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

  My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

  Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

  The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

• The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install.

  * Original title: Microsoft kb3134214

  The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install. I downloaded the updated individual security file. I'll wait to install pending a possible resolution here. If anyone has experienced this problem and has a resolution, I would be grateful to receive information and repair.

  Hi Nathalie,.

  Thanks for the reply and the link to the article. I appreciate it. While I was not having trouble to download updates, it was one of the update of the files froze during installation. I had gel resulting set before your answer.

  I'm not sure what I did to fix it, but the installed annoying file itself. Here are the steps I took to learn that annoying file has been installed:

  "I restarted my computer.

  "then stop it showed that he was trying to install the file again

  "I hit the reset button on my machine.

  "My machine is restarted, I received the message that my machine was not correctly stop and choose Safe mode or start normally.

  "I chose boot normally.

  "Somewhere during the start-up, something installed or flashed a message

  "My system automatically restarted by itself.

  "On my screen, my computer displays a message saying it was set up my system.

  'My computer restarted again

  "Back to my login screen, I had a repeat of the previous message from my computer's configuration.

  "After that over, I arrived at my office

  "I've manually run Windows Update

  "After Windows Update, I checked the files available, disabled the original file in question and click the button install.

  "These files correctly installed and gave a message requesting to restart."

  "I rebooted my system manually.

  "Back in my office, I manually tried to install the file in question.

  "It gave me a message that it was already installed.

  How he installed himself is a mystery. Other than on the first attempt to update my machine, it has NEVER included in my another attempt to update. Anyway, my machine is purring along as if nothing had happened.

  You can mark my question.

  Thanks for your help,

  Robert

• The cursor flashes constantly and will not stop.

  Separated from this thread.

  It does not work. I'm not using Chrome. I use Firefox. The cursor flashes constantly and will not stop. Now, as I type, everything works fine. But in the contrary case, the cursor flicker with the small guard wheel busy with her.

  I had this problem as well - but it has happened when I loaded to the top of Chrome; I tried a lot of different things, but could not solve the problem.

  Then, I saw the post from TonyBrownCloudCo, and I knew he was on the right track here.

  Go to the Google Chrome settings > advanced settings

  Disable Google Cloud Printing - it is a used questionable spooler built-in Chrome browser, it must come from the recent update, because I've never had a problem with it before.

  I hope this works for everyone.

  "If you have explored all the possibilities and tried every permutation, everything that you have, no matter how irrational it seems, it is the truth." Quinn, 2012

  Hello Willie,

  Thanks for posting your query on the Microsoft Community.

  I imagine the inconvenience you encounter and I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1 are you having this problem with Internet Explorer as well?

  2. you remember changes to the system before this problem?

  In the meantime, I suggest you return the form as follows article below and check if this can help:

  How to stop a blinking cursor?

  https://support.Mozilla.org/en-us/questions/943469

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you

• I try to access an application on the website of the Government GOING and that is to say the connection is not approved and will not let me continue, how can I do?

  I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?

  This page opens another page in a frame.
  In such a case, you cannot make an exception.

  • https://vabenefits.VBA.Va.gov/vonapp/default.asp

  This server does not send a certificate chain that ends with a built-in root certificate.

  • http://www.Networking4all.com/en/support/tools/site+check/report/?FQDN=vabenefits.VBA.Va.gov & Protocol = https

  You can open this page in a tab to make it possible to create an exception if you really need access to the site.
  Note that storing a permanent exception should not be.

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• My EQ extinguished and will not pass on. No EQ settings are sensitive. All the other settings are sensitive.

  IPod classic 120 GB Version 2.0.1 PC model MB562LL

  EQ off while playing with headphones and will not on. No EQ settings are sensitive.  Center dial is pressed in EQ mode, IPod switches back on the settings Menu.  This happens for all settings of the EQUALIZER.  I did a hard reset by holding down the Center button and the menu button, but it did not work.

  Try to go to the display settings on the iPod.  Select reset settings (bottom of screen).  This resets all settings on board by default (the data are not affected).  Try to use the settings of the EQUALIZER again.

• When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK.

  This has just begun. When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK. When I say OK and restart Firefox all my tabs go :-( This happens every time now. I know how to recover my old tabs but whenever I close Firefox it always warns me that I'm closing multiple tabs.

  Tanks for help getting Firefox working properly again
  Jim

  Do not use 'Clear history of Firefox closing' to clear the 'browsing history '.

  • Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Using the "Show my windows and tabs from last time" is a more reliable way to restore the session data.

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

• I click and drag the music from my library to a new playlist and some songs are dark and will not play on my device.  Why?

  I click and drag the music a new reading list, but some songs are not highlighted in the play list and will not play on my device.  Why?

  Try two things...

  (1) the songs greyed out can be unchecked. Uncheck the songs are normally excluded from track to track synchronization and normal. With the help of the songs or the list view Ctrl + click on an empty box to check all the boxes in the list of active reading.

  (2) try to go to file > library > Update music library to iCloud and do the update.

• My 2 TB TC is full and will not back up. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.

  Any suggestions on getting my TC back up?

  One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.

  A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.

  Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.

• I'm trying to import my IE Favorites and have read the instructions on how to do it, but the import button in the file in gray and will not let me import. Any ideas?

  I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?

  Try using the import option in the Bookmark Manager (also known as the name of the library)

  1. In Firefox, select the bookmarks menu, then "organize bookmarks" open library
  2. In the library, select "Import and backup" then "Import HTML.
  3. You should get I hope that the ability to import from Internet Explorer.