Disabling weak protocols ACS 4.2?

Similar Questions

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• ACS 3.1 user account disable failure attempts to exceed:

  I look through the documentation on ACS 3.1 and can't seem to find the default password attempts failed. What I want to know is if there is a time limit for how long between password attempts failed the counter is reset. ACS retains an infinite number of the race and after failed attempts the account determined locks if there were 2 minutes or 2 weeks between failed attempts or there at - it some time, after which the failed attempts are disabled?

  Thanks in advance.

  There is no timetable associated with it. If the user enters an incorrect password 5 times in a row (by default) over a period of time, the account is disabled.

  ACS maintains a counter of the current number of connection failures for each account in its database, and it resets it to 0 if there is a successful connection. Theoretically, you can connect 4 times incorrectly, wait a year, and as long as your database is still intact connection again with an invalid pw and the account will be disabled.

• Disable SSH on Cisco routers/switches CBC encryption

  Hello

  Our customer ordered PenTest, and as a feedback, they got recommendation "disable SSH Mode CBC Ciphers, and don't allow that CTR ciphers ' and 'Disable weak SSH MD5 and algorithms MAC 96 bits' on their switches Cisco 4506-E with CIsco IOS 15.0

  I went through Cisco documentation that I could find, also tried to find commands on the switch itself, but I found no way to manipulate these SSH options. (SSH v2 only is already set up)

  Is it possible to do this on Cisco IOS? If this is not the case, what are my options?

  You can use an external server for authentication. But that will not change anything in the encryption.

  RAY will be fine for authentication, if you are also looking strong authorization, you should look into GANYMEDE +.

  Back to you initial problem:

  Some long time there was a similar problem with a client and it resolved in the following way:

  1. All routers and switches had a class of only two Linux servers access to access devices through SSH.
  2. The SSH server was accessed by admins and used as a jumping point to access the routers/switches
  3. Linux servers had a put to update the ssh-server config to allow only the strong crypto to Admins and also check the administrative work.

  With this, there was strong crypto by the admin-workstations to linux server and pretty weak crypto of the Linux for routers switches (which was at the time-3900XL-2950). But as the linux-boxes have been placed in the management network, all on the risk has been reduced.

• Internet disconnects and cannot find wireless network periodically. I have to restart to fix it temporarily.

  SOMEONE HELP ME PLEASE!  I have a very old laptop, since 2002, I think, that is running XP Home. Recently my laptop started to cut all of a sudden and then cannot find the wireless network. I know that this is not the WiFi because my other laptop works very well. When I restart the laptop, it works up until I try to download something and sometimes turns off while I'm browsing. I have a RTL8185 wireless card, which I replaced it with the same model. Still no change. I spent weeks in different forums, try to understand this point, and I don't have a chance.

  I thank very you much for your time. I called my ISP and he told me to try restoring the system to determine if it was the settings or if it was the hardware. Instead, I decided to search the Internet how to speed up my network because Chrome was really slow on the cell affected.

  I happened to run across this Web site
  http://tweaks.com/Windows/37934/hacking-Windows-XP-speed-up-your-network-and-Internet-access/
  When I disabled all protocols except TCP/IP Protocol, the network WORKED! Now the Internet works, I can download large files and browse shared files with the same speed as my other laptop!
  I hope this can help someone else with this problem!

• HELP Please: problems connecting to Google Chrome or Internet Explorer: think it has to do with my network cards

  My computer works perfectly except that I can't connect to the internet using Google Chrome or Internet Explorer. Internet works fine.  I have another computer that is connected to the same network, and it works fine.  Also my signal strength is optimal. When I try to go on Google Chrome, it says that the web page is unavailable & the reason why is error: 105 (net: ERR_NAME__NOT_RESOLVE) the server is not found.  When I try to use the Internet, I get this message:

  Device is not working properly because Windows cannot load the drivers required for this device (Code 31)
  I've tried everything and looked at other forums. I went into Device Manager and tried to update the driver, but whenever I do it just says that all updates are already made.
  I really feel that my problem has something to do with network cards. When I go to Device Manager and discovered the network adapters 13 different adapters appear. The 1st is Atheros AR5007 802. 11b / g Wireless Adapter and it looks like it works very well but there are 11 different (Microsoft 6to4 adapt #10) (all have different # s, 10,11,12,14,15,16,17,18,20,5,9) there is (NVIDIA nForce Networking Controller)
  I think the problem is with the Microsoft 6to4 adapters because win I right click & then click on PROPERTIES of each adapter says: State of the device, this device is not working properly because windows cannot load the drivers required for this device. (Code 31) So, is to "find solutions", says & when I do that nothing happens, a message flashes on the screen that says: "Could not load driver software" and that windows is looking for information, but nothing ever happens.
  Can some1 please help me! My computer worked fine and both Google Chrome and still worked and then out of the blue it just stoped working. Any information would be very useful

  wisports,
  Thank you for visiting the Microsoft Answers community forum.

  You have found the source of your problems.  You must remove or uninstall, all the cards of 6to4.  Also delete everything that said map Tunnel or card miniport WUN.  Also uninstall or disable, Internet Protocol version 6 (TCP/IPv6) Properties tab on existing network cards.

  Once you have done these things, restart the computer and make sure that the 6to4 adapters does not return.

  Let us know how it works for you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connection to Ports transferred to a LRT224 of the internet

  Having just Port Forwarding working on my LRT224 (thanks Chad!), I have the following questions:

  All transferred ports will be visible on the WAN IPs?

  example: forwarded Port 550, IPs WAN; IP1.com and Ip2.com - connections are possible on EACH Ip2.com:550 or Ip1.com:550

  If the answer to the first question is 'yes', then can the LRT224, the active support of concurrent connections, i.e. the TWO Ip1.com:550 AND Ip2.com:550?

  I currently have the WAN configuration in failover mode, however, I would like to know if the WAN2 (Ip2.com:550) connection would be available when the router did not breach the wire, i.e. normal running.

  autodrivel wrote:

  Hi Chad,

  After reading your reply and in turn, then read the user's Guide, let me clarify my original question.

  The LRT224 is currently setup in failover mode of connection with WAN1 as the primary WAN.

  Reading the manual (and your response); in normal operation, only the connections that are made to WAN1 will succeed, my initial example, that means only incoming connections to Ip1.com:550 will succeed, incoming connections to Ip2.com:550 will fail.

  When failover mode, the reverse will be true;  only incoming connections to Ip2.com:550 will succeed, incoming connections to Ip1.com:550 fails.

  The above assumption is correct? Yes

  Question, when the installer in failover mode and function normally (i.e. all traffic directed by WAN1), is it possible to explicitly road some thorough traffic WAN2 using, for example, static routing rules OR not Mode failover blocks all access to the WAN backup, except to failover? WAN2 is completely disabled until failover

  Reviewing the configuration of the load balancing.

  Your response the following assumptions are correct:

  If all the connections to the forwarded port lights WAN1, I need to configure the appropriate binding protocol to ensure that all responses sent off WAN1 - Correct? Yes

  In a situation where WAN1 is down and the traffic is received on WAN2 only protocol links above would prevent a connection to the transferred via WAN2 port to function properly, or the LRT would ignore the links if it knows that the WAN1 is down? I have not tested this scenario but I guess that the binding of the Protocol would be ignored with WAN1 downwards. Worst case you will need to temporarily disable the protocol binding rules.

  If the answer to the question above is "the connection would fail", then I must activate an appropriate set of links to WAN2 Protocol not simply disable the existing ones would be sufficient if necessary.

  Thanks for your help with these queries

  Comments above:

• 3525: cannot install printer

  My office a color of 3525 printer just inherit from another Department that was reduced.

  The printer worked fine in the other Department, but we cannot get to install in its new location.

  We have implemented by ethernet cable and went through trying to install it, but it did not work.  We tried one or several different ports, 4 times, and each time, the printer showed the same hostname and IP address.  The 6th test, we finally could show a different IP (even if host name), but we still cannot work.

  Can someone help me?

  I downloaded one of the manuals and eventually disable network protocols.  That solved the problem.

  Thanks for the help!

• Loss of the network whenever out of sleep or standby connection

  I tried following steps;

  1 reset the IP configuration via the cmd line.

  2. on the power management tab, unchecked the box that turns off the adapter when power save comes into play.

  3. open Device Manager (Control Panel > system > Device Manager) naviguer navigate to network adapters, select the adapter used. Right-click > properties. Click the power management tab, and uncheck the box «Allow the computer shuts...» ». Click the Advanced tab, and then select the 'System Idle Power Saver' property. Set the value on the right to "disabled".

  4.I have changed the computer laptop and not docking as well any results.

  Thank you for your help in advance.

  Hi Sohail Mohammed,

  Follow the steps below and check if they solve the problem:

  Method 1:

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 2:

  You can also disable Internet Protocol version 6 (IPv6) components and check if this solves the problem.

  See the link below and follow the steps mentioned in the article to disable IPv6:

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008
  http://support.Microsoft.com/kb/929852

  The default gateway setting is lost when you wake a computer Windows Vista from sleep mode
  http://support.Microsoft.com/kb/933872

  Method 3

  Uninstall the drivers of network from the Device Manager, then restart the computer to load the generic drivers.

  1. click on start, type devmgmt.msc in the start search box and press on enter.

  2. right-click the network driver and choose uninstall.

  3. restart the computer.

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connection to the single local: NONE of your solutions have worked, and I'm not paying $ 50 for you to continue to doesn't solve is not my problem...

  I tried all of your "solutions" including regedit, I tried to disable internet protocol version 6 or w/e and none of this even came close to work. I NEED internet to do school work, on a laptop, but your software is blocking me completely to do this... I don't have $ 50 to spend on sit on the line with someone who will not solve my problem, and I don't have the money to spend on an another crap software update...

  FIX my problem of fools.

  Hi mane83triple

  Could you tell me something more about your problem? I understand that you can not connect to the Internet. Can you give me more information about all the steps you tried? And the exact error you are getting?

  Try these:

  Step 1: R of the United Nations, the Network Diagnostics tool.

  To make this problem troubleshooting, please follow the steps below.

  (a), click on Start > Control Panel.

  (b) click network and Internet, click network and sharing Center.

  (c) under network and sharing Center, click on solve the problem.

  Disable the firewall\security software that is installed on the computer and check for the issue.
  Note: Enable security software \firewall once the test is done.
   
  Step 2: Also reset TCP\IP.

  You can also go to these links that talk about Internet connection issues:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://support.Microsoft.com/kb/930517

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Also visit the sites that talk about problems similar to yours:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/0adb02c7-2b46-4754-AEAF-265a32f6cd62

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/739a9733-5dfc-4263-9BF6-df0cbfb6f08e

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/dbdc73e2-d5b1-4BA4-AA2F-218ce2d24c6e

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Telepresence server, control assets drops Conference after 30 seconds

  Much of community support.

  I have the following Setup:

  10.5 (1) version CUCM

  Conductor of telepresence Version XC2.3

  Telepresence Virtual Server Version: 4.0 (2.8)

  EX60 TC 7.1.4

  Cisco 9971, Firmware 1.0000 SR1

  Some other phones (7962, 6941)

  All the end points are saved to CUCM.

  When I do a conference appointment without active active control, everything works fine.

  When I activate the active control (according to ActiveControlDeploymentGuideR3.pdf) the Conference ends after 30 seconds.

  the Conference ends even if I have only one participant at the Conference and any of the phones that I use.

  In CUCM, I configured the relevant parameter in the SIP profile (according to ActiveControlDeploymentGuideR3.pdf)

  on the EX60 I use Active Control, so I see the list of participants and I am able to change the layout of the Conference within these 30 seconds.

  any ideas why this happens?

  the journal of the conductor shows nothing statement

  the telepresence server log looks like this:

  327	14:17:09.170	APP	Info	Conference "8080.MeetMe_mtg' created
  328	14:17:09.264	SIP	Info	Incoming call on 192.168.33.xxx:37124
  329	14:17:09.264	APP	Info	"' Call 24: incoming new SIP call of '[email protected] / * /"
  330	14:17:09.379	APP	Info	Call 24: 'Buero_EX60_Test' has now joined Conference "8080.MeetMe_mtg".
  331	14:17:09.386	IX	Info	Call 24: no encrypted connection to 192.168.xx.xx:31135 for protocols: ping, xccp
  332	14:17:09.814	CMGR	Info	Call 24: ActiveControl negotiated
  333	14:17:46.736	SIP	Error	Call 24: end of appeal because INVITE it transaction timeout
  334	14:17:46.736	CMGR	Info	Call 24: disconnection, '[email protected] / * /"-timeout.
  335	14:17:46.736	APP	Info	Call 24: shoot call them "Buero_EX60_Test" - destroy at request end. timeout
  336	14:17:46.736	SIP	Error	Call 24: BYE transaction failed because the network error
  337	14:17:46.740	SIP	Warning	Cannot determine the destination for the incoming message transaction
  338	14:17:46.741	SIP	Warning	Request received from out-of-call
  339	14:17:48.989	APP	Info	Conference "8080.MeetMe_mtg": deleted via API (not of participants)

  Journal of the conductor, it seems that CUCM closes the connection to RE-INVITE during the transition between the lobby.

  There are several possible reasons, but the best way to determine "why" would be to open a track on CUCM.  More precisely a SDI/SDL (are later versions of CUCM SDL only) track on the CUCM 10.0.2.52 node.  Search for RE-INVITE him entering the IP phone and examine the lines of nearby log for some reason why.

  Alternatively, you can try a few other things:

  #1: Look in Service CUCM settings in the editor, then Cisco Call MAnager to the advanced parameter 'Maximum incoming message size' (there is an Advanced button, you must click above to expose this setting).  If you upgraded your CUCM from an earlier version, this value may need door to 11000 to manage RE-INVITE him to the conductor.

  #2: try disabling the Protocol iX on the SIP, conductor profile and the alias of the meeting of the conductor.

  MP.

• Access denied to the IDS MC after update 4.1.2 - s58

  Friday 7, I did the upgrade of four of our device IDS sensors. No problem. Later, I did the upgrade on the MC of the IDS and the next logon, I did ' t access more IDS MC and security monitor:

  "You are not allowed to ask the Action associated screenID: ' / s510"' or ' you are not allowed to ask the Action associated screenID: ' / s550 "' according to the screen I want to access." "" "

  Now it seems to be a problem with authentication via ACS (GANYMEDE +) in combination with fallback to local CS Authentication. However disabling fallback or ACS does not solve the problem. Before this upgrade, we have this problem (of course).

  We are talking to our supplier and an action has already been committed, but after a week, we do not have a solution yet.

  It's really urgent, because we have more access to our events.

  MC ID is always generating reports and send emails to us. It's a pure access problem, I think.

  Is rather peculiar, that we cannot change also the AAA server in the administration of virtual machines (IDS MC). He always wants to check with a GANYMEDE server + even though we have configured local authentication CS in CS security settings.

  Best regards

  Johan Derycke.

  Johan,

  If you've not done so alreacy, go to

  VMS > Administration > Configuration > AAA Server Resync and make sure that it is set on Cisco local works.

  Thank you

  Chad

• 3750 X stack and question wccp ACNS Content Engine (CE)

  Hello

  I work with 3 3750Xs in a 'carrot' and we have a directly connected content engine (CE) on a WAE-612 CNSE ce612 - filtering 5.5.23.2 running web services. We use the wccp with forwarding L2 and L2 return with assignment of MASK.

  The this is located in the vlan 1013 and is directly connected to the 3750Xs of base via po5.  Users are in vlan 72 a stack of 3750Xs in a closet of access that is connected to the base through PO4.  64 VLANS plugs on the perimeter (to the Internet) firewall.

  When only one member of PO4 is physically connected web filtering works, however the web filtering does not work when several members are connected in PO4 and end-users are not filtered.  It seems the 3750Xs kernel redirect not the traffic to THIS more at this time.

  Anyone have any ideas why adding members to the port channel seems to break the wccp functionality.  Would it be due to the "Battery cross" of the channel port?

  Here are some details of the 3750 basic configuration s

  *************************************************************************************************************************************

  #show CORE-3750Xs version

  ...

  c3750e-universalk9 - mz.122 - 58.SE1.bin

  *************************************************************************************************************************************

  CORE-3750Xs #show license

  1 function of the index: ipservices

  ...

  *************************************************************************************************************************************

  CORE-3750Xs #show run int vlan 1013
  interface Vlan1013
  WAE-Smartfilter description
  IP 10.144.1.193 255.255.255.192
  no ip proxy-arp
  *************************************************************************************************************************************

  CORE-3750Xs #show run int vlan 72
  interface Vlan72
  Description STDNT_wired_a114
  IP 10.144.72.1 255.255.255.0
  IP helper 10.144.6.2
  no ip proxy-arp
  property intellectual cache wccp web redirection in
  IP pim sparse - dense mode
  *************************************************************************************************************************************

  #show run int vlan 64 CORE-3750Xs
  interface Vlan64
  IP 10.144.64.1 255.255.255.0
  IP helper 10.144.6.2
  no ip proxy-arp
  IP pim sparse - dense mode
  *************************************************************************************************************************************

  CORE-3750Xs #show run int po4
  Interface Port-Channel 4
  Description * Port channel of closet 114a *.
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 2,3,9-12,20,40,41,72,100,608,614,1423,1620
  switchport trunk allowed vlan add 3001-3003
  switchport mode trunk
  switchport nonegotiate
  disable the protocols spanning-tree bpdufilter
  disable the protocols spanning-tree bpduguard

  *************************************************************************************************************************************

  CORE-3750Xs #show etherchannel 4 sum
  Flags: - Low P - D bundled in port-channel
  I have - autonomous s - suspended
  H Eve (LACP only)
  R - Layer 3 S - Layer2
  U - running f - cannot allocate an aggregator

  M - don't use, minimum contacts not satisfied
  u - unfit to tied selling
  w waiting to be aggregated
  d default port

  Number of channels in use: 5
  Number of aggregators: 5

  Protocol for the Port-Channel port group
  ------+-------------+-----------+-----------------------------------------------
  4 (SU) Po4 - Gi1/0/20 (P) Gi1/0/21 (P) Gi1/0/22 (P)
  Gi2/0/20 (P) Gi2/0/21 (P) Gi2/0/22 (P)
  Gi3/0/21 (P) Gi3/0/22 (P)

  *************************************************************************************************************************************

  #show run int po5 CORE-3750Xs
  Interface Port-channel5
  Description * Port engine content channel *.
  switchport access vlan 1013
  switchport mode access
  *************************************************************************************************************************************

  CORE-3750Xs #show etherchannel 5 sum
  Flags: - Low P - D bundled in port-channel
  I have - autonomous s - suspended
  H Eve (LACP only)
  R - Layer 3 S - Layer2
  U - running f - cannot allocate an aggregator

  M - don't use, minimum contacts not satisfied
  u - unfit to tied selling
  w waiting to be aggregated
  d default port

  Number of channels in use: 5
  Number of aggregators: 5

  Protocol for the Port-Channel port group
  ------+-------------+-----------+-----------------------------------------------
  Po5 (SU) 5 - Gi1/0/5 (P) Gi2/0/5 (P)

  *************************************************************************************************************************************

  CORE-3750Xs #show ip web cache wccp
  The WCCP customer information:
  WCCP Client ID: 10.144.1.194
  Protocol Version: 2.0
  Status: usable
  Redirect: L2
  Package return: L2
  Directed packets: 0
  Connection time: 10:15:38
  Assignment: MASK

  Mask port DstAddr SrcPort DstPort
  ----  -------    -------    ------- -------
  0000: 0x00000000 0 x 00001741 0x0000 0x0000

  Value port DstAddr SrcPort DstPort CE - IP
  ----- -------    -------    ------- ------- -----
  0000: 0x00000000 0x00000000 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0001: 0x00000000 0x00000001 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0002: 0x00000000 0 x 00000040 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0003: 0 x 00000000 00000041 0 x 0 x 0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0004: 0x00000000 0x00000100 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0005: 0x00000000 0 x 00000101 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0006: 0x00000000 0 x 00000140 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0007: 0x00000000 0 x 00000141 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0008: 0x00000000 0 x 00000200 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0009: 0x00000000 0 x 00000201 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0010: 0x00000000 0 x 00000240 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0011: 0x00000000 0 x 00000241 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0012: 0x00000000 0 x 00000300 0000 0 x 0 x 0000 0x0A9001C2 (10.144.1.194)
  0013: 0x00000000 0 x 00000301 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0014: 0 x 00000000 00000340 x 0 0 x 0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0015: 0x00000000 0 x 00000341 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0016: 0x00000000 0 x 00000400 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0017: 0x00000000 0 x 00000401 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0018: 0x00000000 0 x 00000440 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0019: 0x00000000 0 x 00000441 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0020: 0x00000000 0 x 00000500 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0021: 0x00000000 0 x 00000501 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0022: 0x00000000 0 x 00000540 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0023: 0x00000000 0 x 00000541 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0024: 0x00000000 0 x 00000600 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0025: 0x00000000 0 x 00000601 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0026: 0x00000000 0 x 00000640 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0027: 0x00000000 0 x 00000641 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0028: 0x00000000 0 x 00000700 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0029: 0x00000000 0 x 00000701 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0030: 0x00000000 0 x 00000740 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0031: 0x00000000 0 x 00000741 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0032: 0x00000000 0 x 00001000 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0033: 0x00000000 0 00001001 x 0 x 0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0034: 0x00000000 0 x 00001040 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0035: 0x00000000 0 x 00001041 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0036: 0x00000000 0x00001100 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0037: 0x00000000 0 x 00001101 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0038: 0x00000000 0 x 00001140 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0039: 0x00000000 0 x 00001141 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0040: 0x00000000 0 x 00001200 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0041: 0x00000000 0 x 00001201 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0042: 0x00000000 0 x 00001240 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0043: 0x00000000 0 x 00001241 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0044: 0x00000000 0 x 00001300 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0045: 0x00000000 0 x 00001301 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0046: 0x00000000 0 x 00001340 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0047: 0x00000000 0 x 00001341 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0048: 0x00000000 0 x 00001400 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0049: 0x00000000 0 x 00001401 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0050: 0x00000000 0 x 00001440 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0051: 0x00000000 0 x 00001441 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0052: 0x00000000 0 x 00001500 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0053: 0x00000000 0 x 00001501 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0054: 0x00000000 0 x 00001540 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0055: 0x00000000 0 x 00001541 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0056: 0x00000000 0 x 00001600 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0057: 0x00000000 0 x 00001601 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0058: 0x00000000 0 x 00001640 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0059: 0x00000000 0 x 00001641 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0060: 0x00000000 0 x 00001700 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0061: 0x00000000 0 x 00001701 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0062: 0x00000000 0 x 00001740 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)
  0063: 0x00000000 0 x 00001741 0x0000 0 x 0000 0x0A9001C2 (10.144.1.194)

  *************************************************************************************************************************************

  CORE-3750Xs #show ip wccp web cache
  Global information WCCP:
  Router information:
  Router identifier: 10.144.75.1
  Protocol Version: 2.0

  Identify service: web cache
  Number of Clients of Service Group: 1
  Number of routers in Service Group: 1
  S/w redirected packets total: 0
  Process:                                     0
  CEF:                                          0
  Redirect the access-list: - none -.
  Redirect denied packets total: 0
  Packages not assigned total: 0
  Group access list: - none -.
  Total Messages refused for the Group: 0
  Total authentication failures: 0
  Total GRE bypassed packets received: 0

  Check the license on stack x 3750.  Master suspect IP services, other members have only basic IP.

• Color Laserjet 5550dtn: slow down communication with the configuration of the printer

  My Color Laserjet 5550dtn suddenly lost the capacity of its network - as evidenced by the disappearance of the network address in the printer display panel.   I replaced the jetdirect 615n card, and I could then access the installation of I/O again and set the address of the printer that it had before (192.168.1.106)

  The printer seems to work OK, but when I try to access the printer via my browser, using its address, screens appear, but after a very long delay - sometimes up to two or three minutes.   Similar delays occur every time I have change the Access tab.

  I put the mask 255.255.255.0, and the DNS server on 192.168.1.1 (the address of the router system) and have disabled other protocols except TCP/IP.

  I don't remember the exact settings I had before, so is there anything else I may have missed that causes this extremely slow response?

  Any help would be appreciated

  Sorry for not answering before, but my wife is damaged the problems of column vertebral too take precedence over all the rest for a while.

  I started to have more problems, leading to no communication via the ethernet card at all and only work with USB connection.   I bit the bullet and bought another printer of opportunity - without the cartridges of ink, which works very well, and commicates quickly to local net address.

  I saved some of the components of the old machine, so the expense was not so bad really.

  The original machine was always a little suspicious, but it was also used, maybe, I had a bad Control Board.

  Thanks for the useful suggestions.

• Lose Internet connection after the "sleep mode"

  Original title: whenever my windows 7 fate of Eve he always loses its internet connection

  When I run the trouble shoot it says I have an invalid ip address. It's the same thing if I leave a link to the other. I don't understand why he's doing this help please

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  I suggest you to disable the IP assistance service and check.

  (a) hold down the Windows key and type R, type "services.msc" (without the quotes) and press on Enter.
  (b) scroll down for IP assistance service, right click top and select Properties.
  (c) in the drop-down list that says "Automatic" or "Manual", set it to disabled and then click 'apply'.
  (e) then click on 'Stop' to stop the service from running in the current session.
  (f) click on OK to exit the dialog box.

  Method 2:

  If the problem persists, you can disable Internet Protocol version 6 (IPv6) components and check.

  Follow the steps in the article to disable IPV6:

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008
  http://support.Microsoft.com/kb/929852

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base :
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Method 3:
  If the problem is not resolved, change the setting of the power of the network card and check.

  (a) click the Start, type devmgmt.msc and press enter.
  (b) to expand the network adapters and double click on card Wireless.
  (c) go to the power management tab .
  (d) are of course all receivers are unchecked.
  (e) when you have disabled the boxes click ok and restart your system.

  Put the computer in mode 'sleep' and check if you still have any questions.

  Method 4:
  If the problem persists, you can uninstall and reinstall the network drivers and check.

  Uninstall the drivers of network from the Device Manager, then restart the computer to load the generic drivers.
  
  1. click on Start, type devmgmt.msc in the start search box and press enter.
  2. right-click the network driver and select Uninstall.
  3. restart the computer.

  Check out the link:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this information helps!