Disaster recovery and Tunnels S2S

I have a lot of remote sites running 800 routers series multiservice that connect to the main office of via IPSec (no GRE) tunnels. What is the best way to switch these guys on a recovery site without completely reconfigure the whole scenario to use GRE and dynamic failover?

In addition, I would shift immediately, only after an extended shutdown. Is this possible?

I was planning to put a customer VPN on all PCs, but even once the VPN tunnel complicates things. When it is low there is no internet (all internet traffic is lifted back to the main site for filtering purposes). Can you return to send all traffic directly to the internet regardless of the encryption card? All suggestions are welcome!

Each remotesite can have two IPsec peers for the same tunnel.
800 routers will attempt to always connect to the first pair (first site).
If the first site is unresponsive, 800 routers tries to connect to the second peer second site).

Now... This happens immediately because it's normally the behavior of desire (the least downtime).

To do this, for example:

Main site1: 1.1.1.1

Main site2: 2.2.2.2

card crypto peer 1.1.1.1 MYMAP 2.2.2.2

The foregoing statement card crypto on a 800 router will try to connect to 1.1.1.1 and only if received no response to 2.2.2.2

Federico.

Tags: Cisco Security

Similar Questions

  • sys and system schema are expired & locked after disaster recovery.

    Hi all

    In one of our development database, I conducted disaster recovery and he succeeded.
    After completing the recovery thre, sys and system schema are expired & locked.
    So, I'm not able to carry out any type of operation that is performed by the user sys and system.

    Database Version: 11g r2
    Operating system: RedHat 5.5

    Please please suggest me how can I solve this problem?

    Thank you
    Pitard.

    It might be

    What is the status of the users in the source database from which you have taken backup? Maybe he has so locked even after performing refresh status remains the same.

    See your profile stats below. All have remained unanswered. You simply test patience? If this isn't the case, close all threads as answered. Clean up the forum.

    User profile for pitard
    Pitard
          
          
    Handle: Pitard
    Status level: Beginner
    Join date: March 4, 2010
    Total messages: 9
    Total Questions: 8 (8 open)
    Viren name

    Published by: CKPT on February 20, 2012 19:47

  • LINKS on the different types of recoveries and disaster recovery

    Hello

    Can someone please give me the links on different types of recovery scenarios. And what is meant by disaster recovery and how to survive in the event of any disaster recovery and types of disaster recovery.

    Please help me gurus.

    Thank you and best regards,
    Poorna Prasad.

    Useful link.

    http://www.morganslibrary.com/reference/rman_demos.html

    http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/recoscen.htm#BRADV229

    I hope this helps.

    Concerning
    Asif Kabir

  • CUCM and IM & P 10.5.2 disaster recovery

    Come see if I any who can sanity check it.

    I noticed the other day on my IM & P servers that my last successful backup was 132 days ago. Now on my CUCM I do daily backups during the week, UCM, CDR_CAR, and IMP_AND_PRESENCE backup and I can see all 3 are saved OK to my remote destination.

    For me, this sounds like my Pservers & IM are saved through the master agent of the CUCM disaster recovery if the backup of the annex on IM & P servers themselves.

    It would also sound to me that I should be able to retrieve my IM & P servers, through backups made by CUCM.

    I can't seem to find a straight answer in the Disaster recovery Guide is.

    anyone can shed some light on this?  Very appreciated

    Dennis, your understanding is quite correct in this regard. IM & P needs to connect to the master DRF on the CUCM pub for the mechanism of the DRS only it doesn't have its own master DRF starting version 10.x when added as a subscriber to the cluster of CM.

    Infact, there was a known below defects for a problem in which IM & P will not appear while you take the backup of the Publisher CUCM DRS:

    https://Tools.Cisco.com/bugsearch/bug/CSCus64888/?reffering_site=dumpcr

    Concerning

    Deepak

  • OBIEE Disaster Recovery can be configured without CARS and shared storage?

    Hi people,

    As say the topic, I'm looking for advice on disaster recovery. What I find in the docs pointing me to the high availability configuration, or maybe I'm simply not find the docs I'm looking for. And it always points to the RAC, etc. of shared storage. My database is already configured to Dataguard and I want to do things this way, with a recovery site which isn't always upwards and a part of a cluster (although it's very well as long as the CAR is not involved), I'm looking for some feedback on how people do things. I have 11.1 now, but will be upgrading to 12.2 soon.  Just a straight stitch to the documentation would be useful if I'm missing just that.

    Thank you

    -Adam

    Since you have already configured Dataguard and in a DR situation, you will be switching/switch on your course in standby mode and it will active db. All this is fine. You can do the same with instances of weblogic OBIEE. You can clone your binaries installed using tools provided by Oracle cloning, or build binaries from weblogic with the accurate determination of drive on your Dr. use the pack of weblogic server and then unzip tool to archive your entire weblogic domain and it Unarchive in your prepared DR server.

    Now, you have to just challenge the hostname (s) of your domain to point to your database JDBC data sources and weblogic.

    To facilitate the task, you can change the host name used by weblogic to host alias that can be remapped in DNS during DR. Similarly, you can change the JDBC connection string so that it can automatically select the active database as long as you use a database instead of a SID service name in the connection string.

    You will need to regularly make a pack on your weblogic domain in order to maintain an up-to-date backup of your domain proximity. Similarly, if you have reports that are stored on the file system, they must also be backed up regularly so that they can be restored.

  • Procedures and guidelines for Disaster Recovery (DR)

    Hi all

    Our TI auditor asked me to submit/provide procedures for guidelines for disaster recovery.

    I tried Google, but the process docs seem so vast and complex.

    We have a dataguard configuration. Can I give him to the contrary the docs on how to recover/restore using Data Guard?

    Can you share me link to good documentation on the recovery?

    Thank you

    Petra k.

    > We have a dataguard configuration

    Generally, the documentation is created with the Setup program. Documentation describing the configuration.  Documentation detailing the procedures for different situations.  Documentation that lists the commands to use and the expected responses for commands. Documentation that indicates the error handling methods if you try the commands.

    Your dataguard configuration is incomplete without these documents.

    Hemant K Collette

  • difference between the disaster site and recovery recovery management

    Hello guys,.

    can you please let me know if the disaster site and recovery recovery management are one and the same or are they different features of VI suite. do we buy these tools of recovery after disaster from a third party

    name of the vendor? If Yes, what are the best providers out there on the market

    recovery after disaster and SRM? In the meantime thanks for all who responded to this question.

    see you soon

    SRM is a tool to manage a recovery after disaster. There is not such a product called DR, but you can develop a strategy of DR to have your work with or without SRM environment.

    Dr., you need SAN based replication (or tool making it). SAN vendors have solutions that can be integrated with SRM or simply be part pof your particular strategy of DR.

    Marcelo Soares

    VMWare Certified Professional 310/410

    Master virtualization technology

    Globant Argentina

    Review the allocation of points for "useful" or "right" answers.

  • Difference between disaster recovery (replace the user's machine) and material migration Assistant.

    Hi all

    I worked at different scenarios for customers supported the migration of material.

    I found "Disaster recovery (replace the user's machine)" will perform the same action as the 'migration Hardware' option Assistant in common.

    Please let me know if the two are same with operations or any difference is there?

    Essentially, they do the same for the different use cases. The only difference is the default option selected for the computer name in the wizard. Migration of HW, it is 'Set Name'. In the Assistant of Dr., is "to keep the name of CVD.

  • HP15 ab029tx: window update 10 problems should return to 8.1 windows using recovery and come back later

    My computer hp 15ab029tx laptop came pre-installed with win 8.1. I've recently upgraded to win 10. However, after upgrading, I found the following issues. I installed the latest version of the bios and all drivers are up to date on hp site.

    the problems are.

    1. edge flicker browser. Sometimes I use chrome so ok.

    2. autonomy is by 2 hours earlier, that's around 3: 00.

    3. laptop gets very hot. I found coolsense does not. There is no setting of tdp in the power profile. TDP settings was present in windows 8.1.event viewer is full of errors of health active hp, intel dptf, etc.

    error dptf Intel

    Intel (r) platform dynamic and thermal environment: Requested (8.1.10600.150) TYPE: ERROR

    DPTF Build Version: 8.1.10600.150

    DPTF Build Date: June 26, 2015 11:46:12

    Source file:...... \.. \.. \Sources\Policies\PolicyLib\PolicyBase.cpp @ line 693

    Function: PolicyBase::releaseControlofOsc

    Message: Impossible to release the OSC: failure when executing _OSC:

    DPTF Build Version: 8.1.10600.150

    DPTF Build Date: June 26, 2015 11:46:12

    Source file:...... \.. \Sources\Manager\EsifServices.cpp @ line 473

    The enforcement function: EsifServices:rimitiveExecuteSet

    Message: Error returned by the function interface IBSE services call

    Member: NoParticipant

    Domain: NoDomain

    IBSE Primitive: SET_OPERATING_SYSTEM_CAPABILITIES [93]

    Instance of IBSE: 255

    IBSE return code: ESIF_E_UNSUPPORTED_ACTION_TYPE [1202]

    　

    Policy: Policy critical [0]

    Active health HP errors

    COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = return value from the BIOS, which indicates a value of invalid command. : one or more arguments are invalid (Exception from HRESULT: 0 x 80000003)

    4. several fonts of applications is blurred. I use 125% recommended implemented nationally as a 1080 p screen. all drivers intel & nvidia graphics are more recent.

    5. after sleep / standby wireless works irregularly unless I turn it on / off manually & special keys on the keyboard do not work until I restart.

    6. portable seems overall gloomy. (seems to be however performance tests indicate otherwise). Apps to take longer to open.

    So should I go back to earn 8.1 using recovery and wait for more late say 1 year when all bios and driver problems are sorted.

    My main problem is the short battery life and the laptop heats up.

    Concerning

    That's what I'd do - return to Win8.1.

    I have a laptop HP Dv6 Win7 running and the upgrade of Win10 has been a total disaster.  I restored using Win7 HP recovery media.  I'd rather have a BONE more old where everything works, only a new operating system where things do NOT work.

    As to wait a year, the FREE upgrade expires end of August 2016 - so after that, if you still want to upgrade, you will need to purchase a license - and, unlike with previous versions of OS, MS said nothing about the price for upgrade license, or even if such a license will be available then.

  • Problem with different ASM disaster recovery start - new

    Hello together,

    I had an old net here about it but now will not solve the problem with the points in the old thread. Here's the old: https://community.oracle.com/thread/3608049?start=0 & tstart = 0

    I'm doing a disaster recovery with the 'apex11A' on a new server database, which has an another ASM starts. The old man starts is '+ DGA112_1' and '+ FRA112_1', newcomers are called '+ DATA_QUM169' and '+ FRA_QUM169 '. I changed the settings in the spfile restored by writing in a pfile file and creating the spfile from pfile.

    I tried in several ways. First lay the new ASM with RMAN to the course:

    run
{
SET NEWNAME FOR DATABASE TO '+DATA_QUM169';
restore database until LOGSEQ 24286;
switch datafile all;
switch tempfile all;
recover database until LOGSEQ 24286;
}

    Then I tried it in RMAN by defining the new ASM for each data file:

    run
{
SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169';
restore database until LOGSEQ 24286;
switch datafile all;
switch tempfile all;
recover database until LOGSEQ 24286;
}

    Then I tried the bot in one:

    run
{
SET NEWNAME FOR DATABASE TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169';
restore database until LOGSEQ 24286;
switch datafile all;
switch tempfile all;
recover database until LOGSEQ 24286;
}

    Whenever I get one

    Starting restore at 03-FEB-16
using channel ORA_DISK_1


creating datafile file number=1 name=+DATA_QUM169
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/03/2016 16:20:41
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253'

    The backuppiece which I bring are correctly defined with

    RMAN> catalog backuppiece '/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1', '/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1';


cataloged backup piece
backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 RECID=3779 STAMP=902851052
cataloged backup piece
backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 RECID=3780 STAMP=902851052


RMAN> list backup;




List of Backup Sets
===================




BS Key  Size       Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
3779    52.61M     DISK        00:00:00     03-FEB-16
        BP Key: 3779   Status: AVAILABLE  Compressed: YES  Tag: TAG20160203T145340
        Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1


  List of Archived Logs in backup set 3779
  Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
  ---- ------- ---------- --------- ---------- ---------
  1    24285   11073415926066 03-FEB-16 11073416327345 03-FEB-16
  1    24286   11073416327345 03-FEB-16 11073416678326 03-FEB-16


BS Key  Type LV Size       Device Type Elapsed Time Completion Time
------- ---- -- ---------- ----------- ------------ ---------------
3780    Full    813.86M    DISK        00:00:00     03-FEB-16
        BP Key: 3780   Status: AVAILABLE  Compressed: YES  Tag: TAG20160203T145042
        Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1
  List of Datafiles in backup set 3780
  File LV Type Ckp SCN    Ckp Time  Name
  ---- -- ---- ---------- --------- ----
  1       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/system.1423.788355253
  2       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/sysaux.1422.788355259
  3       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/undotbs1.1359.788355263
  4       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/users.1362.788355273
  5       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4.1369.788356305
  6       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4_files.1366.788356317
  7       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms_archiv.1358.788357229
  8       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/planwerte.1357.788357243
  9       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_prod.1352.788456613
  10      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais.1353.788456763
  11      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms.1354.788456995
  12      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/externe_wirk.1355.788457525
  13      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2mt.1356.788458151
  14      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_read.1351.788458291
  15      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329
  16      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657
  17      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/macmon.1340.788458691
  18      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais_read.1339.788458725
  19      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2srm.266.788458799
  20      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859
  21      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/quickcheck.1338.788458887
  22      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/switch.1337.788459139
  23      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/veit_r.1333.788459167
  24      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/test-btdb.1298.795097725
  25      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11dev.986.874230931
  26      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11devbt.985.874230963
  27      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hrbew.1083.851007823
  28      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/optimadata.1032.865951029

    I also tried to put the new ASM SQL:

    SQL*Plus: Release 11.2.0.4.0 Production on Wed Feb 3 16:04:05 2016


Copyright (c) 1982, 2013, Oracle.  All rights reserved.




Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, Automatic Storage Management and OLAP options


SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 1 - new file '+DATA_QUM169' not found
ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 2 - new file '+DATA_QUM169' not found
ORA-01110: data file 2: '+DGA112_1/apex11a/datafile/sysaux.1422.788355259'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 3 - new file '+DATA_QUM169' not found
ORA-01110: data file 3: '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 4 - new file '+DATA_QUM169' not found
ORA-01110: data file 4: '+DGA112_1/apex11a/datafile/users.1362.788355273'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 5 - new file '+DATA_QUM169' not found
ORA-01110: data file 5: '+DGA112_1/apex11a/datafile/apex4.1369.788356305'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 6 - new file '+DATA_QUM169' not found
ORA-01110: data file 6: '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 7 - new file '+DATA_QUM169' not found
ORA-01110: data file 7: '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 8 - new file '+DATA_QUM169' not found
ORA-01110: data file 8: '+DGA112_1/apex11a/datafile/planwerte.1357.788357243'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 9 - new file '+DATA_QUM169' not found
ORA-01110: data file 9: '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 10 - new file '+DATA_QUM169' not found
ORA-01110: data file 10: '+DGA112_1/apex11a/datafile/mais.1353.788456763'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 11 - new file '+DATA_QUM169' not found
ORA-01110: data file 11: '+DGA112_1/apex11a/datafile/mms.1354.788456995'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 12 - new file '+DATA_QUM169' not found
ORA-01110: data file 12:
'+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 13 - new file '+DATA_QUM169' not found
ORA-01110: data file 13: '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 14 - new file '+DATA_QUM169' not found
ORA-01110: data file 14: '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 15 - new file '+DATA_QUM169' not found
ORA-01110: data file 15: '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 16 - new file '+DATA_QUM169' not found
ORA-01110: data file 16: '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 17 - new file '+DATA_QUM169' not found
ORA-01110: data file 17: '+DGA112_1/apex11a/datafile/macmon.1340.788458691'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 18 - new file '+DATA_QUM169' not found
ORA-01110: data file 18: '+DGA112_1/apex11a/datafile/mais_read.1339.788458725'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 19 - new file '+DATA_QUM169' not found
ORA-01110: data file 19: '+DGA112_1/apex11a/datafile/mais2srm.266.788458799'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 20 - new file '+DATA_QUM169' not found
ORA-01110: data file 20:
'+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 21 - new file '+DATA_QUM169' not found
ORA-01110: data file 21: '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 22 - new file '+DATA_QUM169' not found
ORA-01110: data file 22: '+DGA112_1/apex11a/datafile/switch.1337.788459139'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 23 - new file '+DATA_QUM169' not found
ORA-01110: data file 23: '+DGA112_1/apex11a/datafile/veit_r.1333.788459167'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 24 - new file '+DATA_QUM169' not found
ORA-01110: data file 24: '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 25 - new file '+DATA_QUM169' not found
ORA-01110: data file 25: '+DGA112_1/apex11a/datafile/apex11dev.986.874230931'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 26 - new file '+DATA_QUM169' not found
ORA-01110: data file 26: '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 27 - new file '+DATA_QUM169' not found
ORA-01110: data file 27: '+DGA112_1/apex11a/datafile/hrbew.1083.851007823'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 28 - new file '+DATA_QUM169' not found
ORA-01110: data file 28: '+DGA112_1/apex11a/datafile/optimadata.1032.865951029'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form

    But my new database will not set the new ASM and I have no why.

    The db_create_file_dest parameter is set correctly, so I think that:

    NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
db_create_file_dest                  string      +DATA_QUM169

    I forgot something? Would be nice to get help ...

    A big thank you and best regards,

    David

    Your data checkpoint SCN file are in the LOW and HIGH range of the SNA for SEQUENCE 24286.

    Therefore, your UNTIL clause should be 24287 SEQUENCE up to THAT.

    Hemant K Collette

  • Disaster recovery with replication for VSphere

    Am just test VSphere 5 of replication. with a couple of test VMs

    The replication process works very well

    What I want to know is the process to recover a VM replicated to new hardware in the case of the complete failure of the original host and/or data store

    In essence, disaster recovery.

    Are there other parts (software), that I need to take the replica VMDK and files related to re - create a new virtual machine on a new host

    Steve

    Yes, because it will be all your hard and .vmx files.

  • vCloud Air - Disaster Recovery - Europe - UK

    Please can someone advise where Europe - UK datacentres are based, whereas the vCloud service Air Disaster Recovery.

    All links related to security and compliance would be welcome.

    The service is available for re - sale by any partner VMware or only those with a certain specialization / accreditation.

    Thank you

    Hi Ben,

    Answers to your questions:

    -You can see the vCloud updated map to know where on the Web site: vCloud locations - VMware vCloud Air Air

    If you need a more specific location (for put in a private line, MPLS/VPLS), you can see them here: Direct Connect - VMware vCloud Air

    -Info security & compliance is here: reports of Certifications of compliance - VMware vCloud Air the AT101 full compliance are available under NDA - you will need to contact your VMware representative for this.

    -Partners VMware must reach their hybrid Cloud competence to transact

    Hope that helps!

    Jenny

  • Disaster recovery HFM

    We have in time real copy changes of the drive Bay to PROD server to the drive Bay PREPRODUCTION server for database servers, server FDM and Essbase servers.

    Now my question is, can the above PREPRODUCTION server that receives the data from PROD in real-time, act as a UAT Server?

    By UAT server, I mean, the developers will make changes to metadata and rules in DEV server and even load in the above mentioned PREPRODUCTION server and when successful, the same will be loaded into the Production finally.

    Now could you please tell me if the PREPRODUCTION can act as a UAT for them, as it is copied from the PROD in real-time?

    Thank you

    Siva Bhojan

    In reality, it will not work.

    Assuming that your disaster recovery application works by taking tables and copy those above, you will copy the metadata/rules with her.  If you do not copy those, then your backup is not valid for a disaseter recovery.

    Since the metadata/rules are copied from PROD, the work done by developers would be replaced.

    If your Backup DR process moves only data/logs and reconsolidate, so yes, in theory, it could work, but your DR process missing crucial files needed to make the application work.  Not to mention, there is the possibility of the backup fails when metadata is out of synce between the two.

    All in all, not something I would say.  You are better to keep separate UAT and DR.

  • Can we create a Vlan without SRM for disaster recovery testing

    We are working on plans for our recovery after disaster in our VMWare environment.  We have a recovery Site which has a NETAPP file server we reproduce our VM data warehouse and SQL data.   We have no RS, but must be able to test if possible disaster recovery with Production upwards.   Is it possible to configure a VLAN and do a test isolated Dr. without SRM?   Thank you

    Welcome to the VMware communities forum.

    You can create a VLAN without SRM.  You will need to properly set up your network hardware, and then you add new virtual machine port groups to your ESXi hosts.  You can then save the virtual machines by giving them a different name and starts in isolation.  When you attempt to save the virtual machines they will always have a reference for the port VM production group so you'll want to make sure you update you turn on.

  • Physical-TO-virtual disaster recovery

    Hi, what would you do in this scenario?

    • A heterogeneous set of physical servers (with Linux or Win) owned and operated by several customers in different locations.

    • A vSphere on a centralized site infrastructure.

    I wish I had in my infrastructure, a VM power off to each of the remote servers in physics and to keep the image of VM in phase with the remote disks.

    In the case of a remote site explodes, the corresponding virtual machines are started (automatically or manually) as a quick and effective disaster recovery solution...

    Forget the problems of network/IP of this scenario, is there a way or a 3rd party software to keep a VM'd synch with a remote server physical?

    Thank you!

    PlateSpin Protect will be repeated. You place the platespin on the physical server agent and you can replicate the server to an image file or a virtual machine. You can update the image or VM file on a regular basis. It comes from platespin powerrecon product.

    Check it out.

    http://www.PlateSpin.com/products/protect/

    Don't forget to leave some points for messages useful/correct.

Maybe you are looking for