disc in the creation of partition management error

Similar Questions

• problem with the creation of partition of memory not allocated to HP computer laptop

  I have HP Loptop with windows 7 operating system. In this 4 discs are here. ((1 C: 2). HP_TOOLS. 3) Recovery (D :)  (4) SYSTEM.

  from C: drive with about 445 gb, after shrink sound have 33.4 and 411 GB not allocated space...
  
  
  On the management of the computer, I made the following
       411 GB-> right click-> new simple volume-> next-> next-> next-> next-> finish.
  But after press the Finish button appears after the message.
  The operation you selected will convert the selected basic disks and dynamic disks. If you convert the dynamic disks, you will not be able to start installed operating from any volume on the disks (except the current boot volume). Are you sure you want to continue?
    
  I pressed the Yes"" button. Then I got a message like: dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on the cluster.
  
  
  I have 5 HP recovery DVD
  Could you please help me to partition unallocated memory?

  · What are the existing partitions on your hard drive logical?

  Generally, a hard drive is configured with a primary and one extended partition. However, the extended partition can have up to 23 drive letters assigned to breast, for a total of 24 drive letters.

  There are three types of partitions: primary partitions,extended partitions , and logical drives. A disc can contain up to four primary partitions (only one of them can be active), or three primary partitions and an extended partition. In the extended partition, the user can create logical drives (i.e. "simulate" several small hard drives).

  Check out the links for more information:

  Create and format a hard disk partition: http://windows.microsoft.com/en-US/windows7/Create-and-format-a-hard-disk-partition

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/bb1284e2-3fa4-472a-b3db-1777fb692525

• CAN´t burn on a DVD. Process went up to 98% and then rejected the disc. The message is "run time error: unknown exception."

  Can´t burn on a DVD. Process went up to 98% and then rejected the disc. Is the message "run time error: unknown exception. . Cannot burn to a folder either. Process finishes, but the folder is empty. The pc has 474 GB of space. The 61-minute video has some photos 1000 x 750 pixels in size; files (.m2ts and .mp4). using DVD - R. What can I do?

  Rayo

  Thanks for the reply.

  Have been able to translate what I wrote in the numbered validation 1? There's a translate button in the bottom right of each message. Just don't combine English and Spanish in the post. Must there not having that one language in the post of the button translate work. Do not know why. But that's the way it seems to be.

  Given that you can't burn your Timeline on disk or on the record, it seems that the problem is probably in the timeline content somewhere.

  Please reread what I wrote in post numbered 1 to explore the contents of the timeline. If you did that? I will write more on that the next

  If necessary.

  If you have problems in communication, please let me know. I'll re - write my suggestions if necessary.

  Thank you.

  RTA

• Assist in the creation of partition via the CLI

  We have recently improved our environment from 4 to 5

  Since then, I've been frustrated with no success, not creating new warehouses of VMFS 5 CLI data

  I am pulling my hair out trying to use the partedUtil, someone please let me an easier way

  I'm in the VMA because once I'm ready to use vmkfstools I need to be in their same

  From the document VMware KB: using the partedUtil on ESXi and ESX command line utility

  first he says runls /vmfs/devices/disks/

  I try to the VMAS and he telss me no file or directory so I go to the host itself

  to get the names of mpx that I have not I see naa

  Then she said topartedUtil setptbl "/vmfs/devices/disks/mpx.vmhba0:C0:T0:L0"

  I can't because what precedes the name I have seen that the naa

  And what the heck is with the largest number and the end of the

  "1 128 500000 AA31E02A400F11DB9590000C2911D1B8 128" GPT "2 500001 999999.

  AA31E02A400F11DB9590000C2911D1B8 0 "

  This has actually to be there.

  At the end of the day, I want just the steps to prepare the partition so I can format it with vmkfstools.

  Please help, I find very confusing articles

  No matter his C * h * s-1

• After using a third party partition manager program left to extend my Windows 8 partition, the system of Windows 8 start to a black screen and Windows 8 partition of the drive letter has changed

  Original title: problems of Windows 8

  I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much.

  Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer.

  I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work.

  Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow).

  Can someone help me with this please? Any help would be appreciated.

  Hello

  I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system.

  Try to run auto repair from the Windows recovery environment and check if that helps.

  Method 1: start the recovery environment with installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting to Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) click Auto repair of Advanced Options screen.

  (g) following, choose the operating system by clicking on its button.

  (h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact.

  
  Method 2: Run the restoration of the system of the Advanced Options screen.
  
  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting from the Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) select System restore.

  After the system restore your documents and files will always remain to their previous state.

  If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods.
  
  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.

  Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system.

  Write to us if you're still having problems. We will help you.

  Kind regards

• Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

  Hello

  I have a Toshiba Satellite with Vista and since my laptop came with only a single 250 GB, i.e. C:\ partition I tried to partition more than I did the following, I had about 90 GB of data to start with which I transferred to a portable hard drive then:

  Panel--> Admin Tools--> computer management--> management disk storage--> right click C:\ Drive and reduce volume--> it showed only 50 GB of space heat shrink and I created a new volume with this space (F:\ 50 GB)--> transferred all the files to the new 50 GB portable HD space F:\ and remaining 40 GB on the drive C:\

  When I started my computer after a few hours, the new partition F:\ was missing! In addition, there was only the C:\ drive of origin with 40 GB data that I had transferred + 45 GB of data I think it was there previously because the installed files.

  C:\ was so now 40 + 45 = 85 GB without a trace of the 50 GB of data on the new partition I created!

  I had recovered my system to a day before before I did it, it could be the reason? Now, when I try to go to System Recovery it does me not an option for a restoration of watch system.

  To be sure, I now have a backup of the 40 GB of data from the C: drive, but I lost the data of 50 GB of the new partition, and since I have not written new data on the drive is possible that it's still there?

  When I try to search for some files I know research shows me the name of the file, but the file does not open, and the location of the file shows that it is not accessible.

  Kindly advise me on what can be done given that 50 GB of data is really important.

  Thank you

  Go to disk management and open it in full screen and then press the PrtScr button.  Go to start / all programs / Accessories / Paint and open the program.  Go to Edition and click on paste.  Then go to file and click on save as and select a .jpg file type and call the disk management and save it to your desktop.

  Then go to http://skydrive.live.com/ (you will have to perhaps sign up and maybe download some programs, but this will give you a free online place where you can store files for others.  Once the page to the top, click on add files and navigate to the file you just save it on your desktop and add it to one of the folders (I suggest the Public folder).  Once it clicked, and information about it will appear at the bottom right, including where exactly the file.  Copy this URL and include it in your next post.  I would like to see what looks like disk management without asking a thousand questions to describe everythhing for me.

  If you did a restore of the system already on the previous day, there is probably no new restore points created since then, so there is no option to do a system restore.  In addition, a system restore would not solve this problem - this is way beyond its capabiliities.

  Download the free EASUS Partition Manager: http://www.partition-tool.com/ and run it to scan your drive and see if it finds anything Disk Manager can not - it "s possible he can pick up our lost F:\ partition or unidentified space which could be this partition but not correctly identified.  In a same, t I would like to see if it detects anything useful (and it can also be useful the fixing of the problem if we can find it).  Moreover, the total space of the C:\ drive is now is what it was before you have shrunk or it it showing the size reduction that you can expect if the new volume had actually been created?  Let me know what you find if anything.

  Right-click on your CD-ROM drive, and then click on change drive letter and paths.  Click on edit and then right click on the drop box for the available letters.  F shows as available or is missing in the list?  Leave it (don't change anything in reality - I just wanted to see if F has shown as available since if it was assigned (such as C: is assigned) should not be shown at the top on the list.)  I would like to know if he was there.

  I hope this helps or at least gives us some clues on how to solve the problem (whatever it is).   Keep me informed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install PowerDirector 10 Super-Micro by Cyberlink, when I put the disc in the player getting error (E:\is not a Win 32 Application valid).

  I installed Windows 7 64 bit on a new computer.  Everything that the seams to work properly. I then tried to install a new program from Cyberlink called PowerDirector Ultra 10.  I put the disc in the drive and get an error (E:\is not a Win 32 Application valid).  If I put another CD or DVD in the drive, it works very well. Can someone help me please

  Original title: using Windows 7

  I would contact the people you bought it from.  Maybe you have a faulty drive.  You can also click on start-> computer and look at the contents of this disc.  If there is a Setup.exe file on that, try double-clicking it and see what happens.  If this does not help, open the AUTORUN. INI file with Notepad and see what file it points to.  Then try double-clicking what it points to.

  Good luck.

• Insert a disc in the drive \Device\Harddisk3\DR3?

  have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.

  When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends.  in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.

  very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing.  I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).

  was blocked for a day now.  thoughts?  tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.

  code attached

  new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES.  Board of Directors is a NI PCIe 6363.

• BSoD - error DRIVER_OVERRUN_STACK_BUFFER and chart use disc in the Task Manager showing constant 100% graphic

  All of sudden it began to show "BSoD - error DRIVER_OVERRUN_STACK_BUFFER" and while the system is turned on, it displays "chart use disc in the Manager of tasks showing constant 100% graphic.

  Friends, this is

  IT HAS THE FILE INFO MINIDUMP AND ZIPPED SYSTEM.

  Please go through it and help me friends :(

  SkyDrive link: https://onedrive.live.com/redir?resid=3CFADFC6344DFA0A%21263

  It worked, thanks!

  All attached files of the DMP are the verification of bug DRIVER_OVERRAN_STACK_BUFFER (F7) .

  This indicates that a driver has saturated a stack-based buffer.

  A driver invaded a buffer based on the stack (or a local variable) in a way that would have replaced the function's return address and jumped to an arbitrary address when the function returned.

  2: kd > k
  Call child-SP RetAddr site
  fffff880 '192edc58 fffff880' 03da0f6e nt! KeBugCheckEx
  fffff880 '192edc60 00000000' WinFLAdrv + 0x3f6e 000000f7
  fffff880 '192edc68 00fff880' 6d2ebda0 0xf7
  fffff880 '192edc70 0000f880' 03da3019 0x00fff880'6d2ebda0
  fffff880 '192edc78 ffff077f' fc25cfe6 0x0000f880'03da3019
  fffff880 ' 192edc80 00000000 00000000 of ' 0xffff077f ' fc25cfe6

  WinFLAdrv.sys invaded a buffer based on the stack, so called bug control. It is a pilot

  associated with the Service of NewSoftwares.net WinFLAdrv.sys Application. Uninstall ASAP!

  Kind regards

  Patrick

• Error "Cannot open disc" on the bootcamp partition.

  I have Windows XP Pro SP3 Ultimate Edition installed on a partition on my Macbook bootcamp.  When I try to open it with Fusion, after I entered my password, I get the error "cannot open disc" / Users/DBM/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. "." "Reason: the specified file is not a virtual disk."

  Does anyone know what I need to do to get it working?

  doublepedaldylan wrote:

  I have Windows XP Pro SP3 Ultimate Edition installed on a partition on my Macbook bootcamp.

  There is not the OS as "Windows XP Pro SP3 Ultimate Edition"!

  When I try to open it with Fusion, after I entered my password, I get the error "cannot open disc" / Users/DBM/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. "." "Reason: the specified file is not a virtual disk."

  Does anyone know what I need to do to get it working?

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also be sure that you copy the entire command below "rm" line at the beginning of the "(quote) after the p in the Camp of. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• Satellite L300D - 13s - error during the creation of the recovery disc

  Tried twice to create discs with creator on my new Satellite L300D - 13s.
  Twice failed them to halfway through disc 1 with the message unable to read the file F:\07031XSP.swm, error 020150-20-00000000.

  How do I now please?
  Come see an old NET with a similar error and disc quality was mentioned.

  Samsung pleomax 4xdvd-rw uses. Should I try something else then?

  Yes, it certainly comes with DVD disc is not compatible.
  You should try different children of the DVD from different manufacturers.

  I had good experience with TDK DVD-R

  Good bye

• We live errors in the creation of recovery media. Please try again

  Hello

  I bought the windows 8 hp pavilion series laptop and tried to create the recovery with blank disc DVD - R disc.

  While burning data first drive the HP Recovery Manager application up the pop-up message like "we live errors in the creation of recovery media. Please try again' with the OK key.

  Press the button Ok app closed automatically once.

  Model laptap

  HP Pavilion n003tx-15 Notebook PC (Windows 8)

  Please someone help me.

  Thanks in advance

  Concerning

  Trehout

  Have you tried to burn in Mode safe?

  http://support.HP.com/us-en/document/c03481733

• disk management errors and lost partitions

  I have reimagee a older laptop that has a 500 GB drive. In the process, I have partitioned the hard drive in three volumes: a drive T: and V: each with 100 GB and C: got balance. A day or two later, I noticed T: and V: mysteriously disappeared. Fortunately, I didn't put anything in them again, there was no loss of data. However, it seems that I have lost access to disk space. Disk management show up with this:

  

  All traces of T: and V: disappeared. The c: volume 226GB poster (including 148GB is free)... which is all what I think after I had partitioned the disk. But then underneath, the entry to disk 0 C: Watch is affected 465 GB... it is unclear where the balance of 35 GB went. If I try to reduce the volume, it presents me with the total available size 476938MB and shrink space 151834 MB. If I try to further reduce 1 MB, it fails with the error "Virtual Disk Manager: the parameter is incorrect."

  Now that I'm in this State, is it possible to recover without start from scratch?

  Use the free Partition Wizard boot CD to shrink C by as much as you like.

  Assistant Creation of partition resize Partition - video help.

  Create and format partitions of data desired logic.

  Create partition Wizard Partition - video help

• Replaced the HARD drive on N5010, put in "Windows Boot Manager" error

  I'm having N5010 and installed the new Seagate hdd. I used the dell recovery disk (created when the system has increased with the old hard drive) for installed Windows 7 and all the software came as part of the original image. After successful installation, first time I've seen Windows is started and I could see the Win7 desktop. After this, I restarted the laptop, and then he not start instead showing "Windows boot manager" error that windows does not load... error 0xc000000e...

  Can you please help me solve this problem?

  I thank in advance.

  Kind regards

  Rajiv Nigam

  Thanks again.

  The error specified in the link is not same as I get.

  But I tried another option yesterday almost similar to what I had created image of Norton Ghost of my operating system partition.

  -First I used the Dell recovery disk to store everything. Given that this option was not working and give me same above error.

  -File Win7 Home Premium ISO downloaded from http://msft.digitalrivercontent.net/win/X17-58997.iso

  -Burned the ISO to a DVD and booted up the laptop with this DVD.

  -Norton Ghost image restored to the OS partition using Norton software used for the creation of the image

  -Tried but got the same error, then I started mobile uses DVD Win7 and selected option to repair windows

  -Ensure the OS partition is 'active' with Partition Wizard (http://www.partitionwizard.com/free-partition-manager.html)

  -Even once when I first started, I saw error like "Repair Windows (recommended)" or "run windows normally.

  -Selected "Run Windows normally", after that I have found no problem. My laptop works perfectly without any startup errors.

  Thanks for your help.

  In fact, Norton Ghost Image helped me restore the operating system on the new HARD drive and as I went through a lot of discussion on this forum before doing this exercise.

• Windows 7 disk management utility does not allow the creation of simple volume:

  Hello

  I used the Windows 7 disk management utility to reduce my about 450 GB C drive at about 210 GB. While I try to convert the volume unallocated resulting in a new simple volume, it fails with an error message indicating the space is insufficient on the disk (s) to complete the operation. The original disc was almost empty, while I performed the shrink operation. What is the problem here?

  Try one of the two utilities listed below. I think you will find they work better.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To achieve any task using the "Operations pending" box at the bottom or top left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com