Insert a disc in the drive \Device\Harddisk3\DR3?
have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.
When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends. in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.
very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing. I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).
was blocked for a day now. thoughts? tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.
code attached
new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES. Board of Directors is a NI PCIe 6363.
Tags: NI Software
Similar Questions
-
There is no disk in the drive. Insert a disc in the drive device harddisk5 dr5
I started getting this error message "there is no disk in the drive. "Insert a disk into the drive device harddisk5 dr5. I have to click on about 20 times and it goes away eventually. I use Windows 7 and have been unable to find an answer to how to make this message go anywhere. Any suggestion would be appreciated. Thank you!
Hello
· Were there recent changes made on the computer before the show?
This problem occurs when all the following conditions are true:
(a) you have a removable drive, such as an Iomega Zip drive, configured as the drive letter C.
(b) you don't have a removable disk in the removable disk drive.
Method 1:
Change the assignment of drive letter for the removable a drive letter other than C:\.
a. log in the computer as an administrator.
b. Insert a disk in the removable drive.
c. type computer management in the start search box and press ENTER.
d. click on disk management.
e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.
f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.
Method 2:
I also suggest you to start the computer in a clean boot and check which program non-Microsoft is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.
Method 3:
You can go to Device Manager and see if you have any yellow bang! for the mouse or devices.
(a) click Start and then click Control Panel.
(b) click on system and Maintenance link.
(c) in the system and Maintenance window , click the Device Manager link at the bottom of the window.
In Device Manager, go then, mouse or other pointing devices.
Do you see a yellow fringe! This would mean that you have an error with this device. Try to remove and reinstall.
I hope this helps.
-
Hi all!
When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.
attachment: -.
http://i51.Tinypic.com/6zoaoo.gif
or
Please help me as soon as possible!
Thank you very much!
Post in the forums of users AVG.
-
There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
Please help me to remove it from my computer!Hello lala80,
Thank you for using Microsoft Vista answers Forum!
hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.
You can disable this feature by using msconfig in Windows.
Click Start and type msconfig in the search box and press enter
Click the Start (top row)
In the list of programs, uncheck hpqtra08.exe
If please reply and let us know if your problem is resolved or if you need more help
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think. -
There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.
Original title: coordinator.exe no disc
I got this message after installing BitDefender antivirus.
It turned out to be partly because of WinPatrol - who had not been uninstalled.
And the program uninstal delete his entry autostart nor its program file.
Which has supported, manually, the end of the message...
But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus. (It worked well alongside Avast.) -
I just started getting this error in the last month. It only happens when I start my computer. I started to use Windows Live Mail Beta. Would this have something to do with it?
The problem was with Windows Live Sync. Once I have not won, I didn't the message again.I'm fairly certain that this has nothing to do with Windows Live Mail beta - but it does not sound like a startup program any want a disc in the drive and that is what causes the problem.
To boot from the hard drive, first of all, in the boot sequence, you may need to change the BIOS to hard drive first in the boot sequence (it is not always necessary and I have my system set to start first on the CD player and have no problem - but you have problems so we'll see if that fixes the). To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. While there, make sure that there is no setting to boot the disk hard regardless of the boot sequence. Reset. Normally, it should start without the error message.
If this does not work, what is the EXACT (including all codes verbatim) error message? It refers to a specific file, and if yes, what is the file name? Are you able to start despite the message or that you need to insert the CD in the drive and then it allows you to start?
Try to boot into safe mode without any CD in the drive (repeatedly clicking the F8 key during the boot process until the menu appears) and see if it works or if you have the same problem. If you can start in safe mode, it's a good sign.
If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
If this does not work, go to start / search area and type msconfig.exe and enter, and double-click on the program icon that appears. Go to the Startup tab and remove all checks, click OK, close the program and reboot and see if the problem persists. If this isn't the case, then the problem is caused by something trying to boot at startup, and you may need to add the items back one by one, restarting after each one, until you find the culprit at the origin of the problem. Then let this disabled element, double-check all the others that you actually want from startup, click OK, close the program and restart. The problem should be solved. If it's not working, then go back and re-check items that have been checked, click OK, and save the program and restart. You'll be back to where you started, but we will have eliminated a very likely cause.
That's all for now. I hope this helps. If the problem persists, I need more information about this message and all the files that he mentions.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Error - Please insert a disc into the drive trying to open & H R Block at home software CD.
Original title: XP will not launch my H & R Block at home software CD.
I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players. I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive. I tried other CD and they work all including the H & R Block CD provided in the mail. Any suggestions for ways I can manually launch the CD ROM? I returned to the store and exchanged, and the second CD did the same thing.
Hi AALLIS,
You did it all change hardware or software on your machine before this problem?
You can follow this link & check if it helps.
Hope the helps of information.
Please post back and we do know.
-
There is no disk in the drive. Insert a disk in the drive\Device\Harddisk6\DR6
I get this message every time I try to run a slide show program showit web. This happened only since I added a hardrive external seagate.
Hey Kori,
Until resolve us the problem, verify the following information on your computer and view the results in return.
- Browse to the location of the slideshow installed showit web?
- Check by disconnecting the external harddrivve and try to launch the program and check if you receive the error message.
I also suggest you to change the assignment of drive letter for the removable hard drive to one letter other than drive C and check if that helps.
To change the drive letter assignments, follow these steps:
1. sign the computer as an administrator.
2. Insert the external hard drive.
3. Click Start, right-click computer and then click on manage.
4. click on disk management.
5 right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.
6. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.
Restart the computer and see if you receive the same message.
I hope this helps. Let us know the result.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Outlook 2003
Hello
Please check with the experts of the Office and Outlook here: (re - ask your questions here)
Discussions of Questions General Outlook
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=usMS Office discussion groups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
And here:Microsoft.public.Outlook discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=usI hope this helps. Rob - bicycle - Mark Twain said it is good.
-
This happened today after that I used my USB and now I cantget get rid of this error code I click Cancel and it just keeps popping up! its so annoying, please help I would really appreciate it! thaks
Hello laladjmom23,
1. do you insert any removable drive to your computer before having this problem?
I suggest that you follow the section below to resolve this issue:
http://support.Microsoft.com/kb/330137
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Cannot cancel the message error "there no disc in the drive, etc.
When starting today I received the error message "there is no disk in the drive. Insert a disk in the Drive\Device\harddisk\DR1. »
I read the advice from Microsoft about stopping thie message re-product online, but I can't cancel the message no matter how many times I click Cancel, close, etc. If I can get rid of the message, I might be able to sort the problem! Can anyone offer some advice please!
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Kim,
I tried to put a disc in the drive, Zip and Eureka! the message has disappeared :) Now, I'll try and follow the rest of the tips in the link you sent me. Thank you.
Rolfe2
-
no disc in the drive? And file is not supported or the required codec is not installed?
I have been w work on a project for over 6 month. yesterday, it would not open. First he asked me to point to the location of the video files for 18 files I fortunately work for the last 6 months, and then once I went that it gives me the message:
' There is none in the hard disk drive. Insert a disk in the drive\Device\Harddisk2\DR2'
.. .and constantly stopped upward when I tried to ignore or Cancel to exit (forcing me to go to the Task Manager to close items).
I should point out that I have worked off the coast of files stored on an external hard drive of 1 terrabyte. However, I am still able to view and open all the ext HD files in Windows Media Player, etc. which eliminates me the idea of a problem with the drive.
I can open a new project and add the same file/s (first few files for a test run). Following its telling me
"This type of file is not supported or the required codec is not installed."
.. .but it worked just the other day, so it IS supported and must have the required codec.
Moved some files on the hard disk of the PC. Seems to work ok... take back me to the fact that the external hard drive can be a source of the problem, but I can open all the files there in all other programs... so you have PE? Or is it?
I can't find any similar link on the forum... but if anyone can help or have any suggestions I'd appreciate your comments! See you soon
Gila Valley,
Welcome to the forum.
Can provide you details of your system, your project and your source files?
It may be best to start a new thread to do this, so that zero confused between your questions and the OP also, since this thread has been marked as answer, many people eventually spend on watching and miss your problems. The more eyes on a problem, the better.
I would like to look at this ARTICLE for suggestions on the types of information that would be so useful.
Then, if you collect this info, take a look at this ARTICLE to settle pre, your operating system and also the computer.
Good luck and thanks for this info,
Hunt
-
When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
My C: drive is my main area on the HARD disk. The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
Are installed:
FW MS .NET 1.1
MRS. NST FW 3.5 sp1
MS SQL Server 2005
MS SQL Server 2005 compact Edition [ENU]
MS SQL Server 2005 Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS writerHere is the error log:
[06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)Try to post or search the MSDN Forums
http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads
http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads
There are indications that some USB devices may cause this error. Try unplugging as much as you can.
-
Hello
I use windows 7. When I try to connect the usb modem or remove drive in my computer, and then sometimes it displays a .exe - no disk popup, "there no disc in the drive. Insert a disc into drive \Device\Harddisk1\DR1. There are 3 options Cancle, retry, continue. But these options never work. It appers again. (I can't repair/restore my pc because I have only One Drive (C). so please help me...)
Hi Kalyan,
Thanks for posting in the Microsoft Community. Help us with more information:
This problem is specific to these devices?
Have you tried to connect the devices on different USB port?
This problem can be caused by damaged USB drivers. I suggest trying the steps and check if it helps to fix this problem.
Remove and reinstall all USB controllers
To remove and reinstall all USB controllers, follow these steps:
Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
Click the hardware tab.
Click the Device Manager button.
Expand Bus USB controllers.
Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
Restart the computer to reinstall the USB controllers automatically.
Plug in the removable USB storage device and test to make sure that the problem is solved.
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
When I'm inserting an internet data card into my USB its error message indicating that svchost.exe - disc no. there is no disc in the drive. Please insert a disk into drive\Device\Harddisk1\DR5 Cancel, continue tryagain all option does not work its new popuping outside. :(pouvait point de restauration système peut aider?) or is it a problem with the virus please help.
Hello
1 did you change on your computer?
2 what other USB devices are detected on the computer?
Try connecting to another USB port and verify.
Connect the card to internet data to another computer and check if works
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx WARNING: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
Maybe you are looking for
-
I have a very annoying problem. Skype is very quiet. If someone sends me a message or calls, it's really quiet. I looked in my audio settings and have not been able to find something that changes it. People can hear me very well when I call them, but
-
Flash cards are not visible on the screen when I use the FN key
When I press the "FN" key is more the meaning of each F1 to F9 keys on the screen.I restored my system, the screen was beautiful, but disappeared again. Where is the problem?
-
not able to update, it says: error WindowsUpdate_8024402f please help
not able to update, it says: error WindowsUpdate_8024402f please help
-
Just noticed something at the top of the page every time I scroll a black container happens. What is it? How can I disable it? in the example of cookbook it shows help add salt settings buttons
-
Change an attribute value in a table of the tree at all levels using the control button.
Hi allI use JDeveloper Version 11.1.1.7.0.I have set up on my Table from the tree only when selected in the parent level also chooses the checkbox on the levels of the child associated with a checkbox, see my below base schema.My method to achieve th