Disc is 'offline' in the table of PS4100

Similar Questions

• Recording on DVD - "Unable to retrieve the table of contents" error

  Hi all

  Whenever I try to record on a DVD a face "could not retrieve the table of contents.

  I tried to change the recording speed, but no use.

  When I go to properties of DVD and click on activate record it does not recognize the DVD or any CD in the drive.

  Please help

  Hello

  1. what software to use to burn cd/dvd discs? Try using Nero, Ashampoo burning studio, alcohol CD and DVD software of engraving,
  2. then, I advise you to use high quality as TDK or Verbatim media.

  3
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  If your problems persist, there may be a problem with your cd/DVD-ROM

• computer says please insert a disc when I insert the dvd

  computer says please insert a disc when I insert the dvds:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• A record in the table is not approved

  We have a PS4100x Equallogic in production. A few days ago one of the drives has failed and we ordered an original Dell HDD for this device. When we replaced the damaged for a new, the console says that the disc is not approved.

  We checked the documentation and cannot find that this happens when there are questions of firmware when the drives are not original (who from not Dell) and not alike.

  The other thing is that when I try to add to the table, the "Add table" option is gray out.

  Any help would be grateful, thank you!

  Hello stamac,.

  I'm sorry, but only Dell Equallogic brand work readers in a table EQL.  It is custom firmware on the drive on which the search table.   There is no work around for this.

  Kind regards

  Don

• where are stored physically tablespace, the table structure, package?

  Running Oracle 11 g on Linux.
  
  My disk parameters are:
  
  / dev/sda1 (start)
  / dev/sda2 (/)
  / dev/sda3 (/ u01) for Oracle software. Base: / u01/app/oracle
  / dev/sda4 (swap)
  
  / dev/sdb1 drive ASM for DATA
  / dev/sdc1 disc ASM for DATA
  / dev/sdd1 disc ASM for FRA
  
  
  1. where are the tablespace, structure of the table (for example the table name, column name, column type, primarykey keys and index), package, procedure, trigger, and stored PHYSICALLY function? I want to know the location of the path and drive common directory?
  
  2. when the Fast Recovery Area (FRA) performs the backup task, will be the tablespace, structure of the table (column, type, key, index), package, procedure, trigger and function also supported up to Fast Recovery Area (FRA), in addition to the data files, control files, and redo logs and archived newspapers?
  
  
  
  Thank you

  You must understand the difference and the concept of physical and logical storage Structures storage Structures.

  http://docs.Oracle.com/CD/E11882_01/server.112/e16508/physical.htm

  http://docs.Oracle.com/CD/E11882_01/server.112/e16508/logical.htm

  / dev/sdb1 drive ASM for DATA
  / dev/sdc1 disc ASM for DATA
  / dev/sdd1 disc ASM for FRA
  1. where are the tablespace, structure of the table (for example the table name, column name, column type, primarykey keys and index), package, procedure, trigger, and stored PHYSICALLY function? I want to know the location of the path and drive common directory?

  Probably your database is stored on the file system ASM, using the/dev/sdb1 and/dev/sdc1. Therefore, if your database files is on ASM diskgroup 'DATA' and then all of the objects is here.

  Query V$ DATAFILE, V$ CONTROLFILE, V$ LOGFILE, V$ TEMPFILE

  2. when the Fast Recovery Area (FRA) performs the backup task, will be the tablespace, structure of the table (column, type, key, index), package, procedure, trigger and function also supported up to Fast Recovery Area (FRA), in addition to the data files, control files, and redo logs and archived newspapers?

  FRA is used to contain backups of database then your objects are saved it too.

  RMAN can check it out:

  BACKUP FROM THE LIST;

  LIST ARCHIVELOG ALL;

  Published by: Levi Pereira on October 8, 2012 12:05

  Published by: Levi Pereira on October 8, 2012 12:09

• How to find if the data in the table are distributed on multiple disks

  Hi all
  
  I have a question on parallel processing.
  
  Assume that the Oracle (11 g 2) database is installed on a 12 CPU hardware has 24 independent labels, then I guess it's that we can have a maximum of 12 DOP.
  
  But if the table on which I use the parallel market that spans only 4 discs then the above 4 parallelism will degrade the performance of the query.
  
  My question is how do I know if the data in the table are spread over the number of disk drives, so that we can properly apply valid parallel operations on the table.
  
  Appreciate your valuable contributions here.
  
  Thank you
  MK.

  Just think logically.
  What is a table in the database? A segment.
  What is a segment made up of? Scopes.
  What is recorded on a scale? The id_fichier of the data file.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• Bigger disk-swapping, but down two, possible to remove them from the table, and then expand?

  I have a R710 with a PERC 6 / i, Win 2008 R2 running. I have a small disk for the operating system, the other 5 bays are filled with 1 TB disks in a RAID array-5.

  I need to add more storage, so I want to buy three discs of 3 TB. I plan on the withdrawal of old readers, and then put it in the new, bigger. I assume that it will take 1 of the 3 TB and repair. Leaving free 2 TB disk. Repeat this step twice more, which will result in three discs of 3TO with 6 TB of disk space not used in the RAID.

  Is it possible to have the controller expand storage in my table of RAID-5 existing free space, and then delete the two remaining 1 TB disks in the array?

  Who is? Is it still possible? Or do I have to backup the data on another storage device and delete the table and simply start a new one with the three discs of 3 TB and copy the data back?

  This will not work:

  (1) the PERC 6 won't take 3 TB drives; the maximum size is 2 TB.

  (2) you cannot delete records in a table - your RAID 5 5x1TB must always have records of 5 or more (you can add without deleting).  Even when using the same number of disks, isn't it possible to do the smaller table/VD.

  (3) even if you used 2 TB disks, there is no way to expand the RAID 5 using the extra space on the disks - with 5 disks in RAID 5, it will remain the same size. The only thing you can do with the new space is to create a second RAID array on the disks (called "slice").  This new VD is handled by the operating system as another "drive."

  Keep in mind if backup and restore in a larger painting, as if the VD ('disc') is greater than 2 TB, the disc "" MUST be converted to GPT and active UEFI bootmode (instead of BIOS).  Make sure that your backup software is capable of restoring one using the BIOS install on a system UEFI (and the 'disc' TPG 'disc' MBR).

• Question about full scan of the Table and Tablespaces

  Good evening (or morning).
  
  I read the Concepts of Oracle (I am new to Oracle) and it seems that, based on the way in which Oracle allocates and manages the storage of the local the following is true:
  
  Principle: A table which is often accessible by using a full table scan (for some reason any) would be better resident in its own dedicated tablespace.
  
  The main reason I came to this conclusion is that when you perform a full table scan, Oracle doesn't diluvium IO, reading probably one step at a time. If datafile (s) of storage space only contain data for a single table, then a reading series will have to skip segments containing the data in the other tables (as is the case if the tablespace is shared with other tables). The performance improvement is probably low, but it seems that there is a very similarly.
  
  I wish I had the thoughts of DBA experienced about the assumption above.
  
  Thank you for your contribution,
  
  John.

  a reading series will not jump the segments that contain data from other tables

  You are referring to a misleading picture of the operation.

  Let's say 'A' table is a table among a number of tables in a tablespace that consists of one or more data files.
  Since this is one of the many tables, it may not start at the beginning of a data file. His first measure may be somewhere in the middle of the file. The next step may not be nearby with the first step. The 3rd degree can be in different data file.
  So, it's the picture where you see Oracle having to jump the other tables when you do a FullTableScan.

  Now, view the same image:
  Measure 1 is in the 1000 to the 1127 block block (IE 128 blocks) in the data file 6
  Measure 2 is the 2400 block 2527 block in the data file 6
  3 is to the block to block 9371 9245 in datafile 12

  How Oracle does not have a FullTableScan? It starts with the segment header to get a map of the extent (it would read UET$ in a dictionary managed tablespace). He knows now what degrees it should read.
  What is doing?

  He made a call to the operating system to read 1000 blocks Oracle 1127 in the data file 6.
  The operating system then translates this call to starts and ID ranges and the block of the file system.
  The operating system puts this request to the storage subsystem.
  The storage subsystem and then translated the BONE, ID, blockrange to the drive starts, track, sector.
  Assume that these are all the neighbor on the single disc (that is, the volume is not distributed over multiple LUNS and disks).
  Storage reads the information and sends it to the operating system. This can still mean multiple readings, because the head (or several heads because the disc is made up of several trays) does not read 1 MB in an "appeal".
  The operating system then collects the 1 MB and passes it to Oracle.
  Oracle then fills buffers in its cache buffers--(PS: Astuce!) Tip! (: don't you know that it will be not be neighbor memory locations?)
  Microseconds past milliseconds.
  The disc is still spinning (it stops ). It has "evolved" - a different set of blocks are now under the read head.

  Oracle is now asking the OS for blocks of 2400 to 2527 in the data file 6.
  Oracle did not to "jump the other tables. He just made a separate call to the OS with a new range of blocks.
  The operating system now translates the block ID and filenumber at its own mapping.
  Storage then made his translation.
  The disc under the head blocks are very (almost certain) to be a different from blocks together. Not even those corresponding to 1128 Oracle Oracle datafile block 6. Not even the ones corresponding to 2400 block Oracle in Oracle data files.
  We are suffering now fetch - and reading the disk.

  and the story continues...

  And what happens if there is finally another user on the same system? Between the first blocks 1000-1127 call and the second call to blocks 2400-2527, that other user requested blocks 2000 (IE made a call from reading one piece).
  And, after the second measure is read by the user FullTableScan, a third user has requested block 2048 in a single block read call.

  It is important that the Table is not in the neighbor extensions? Even if you did put the table in "adjacent areas" they are not likely to be contiguous on the disk. Even if they are nearby on the disk, they are not likely to be able to read without delay, because the disc has passed.
  And we have not even spoken interleaving where readings from multiple disks need to be coordinated.

  So why still prefer 1Mo diluvium readings in Oracle? Because most SOAs allow a single OS call of up to 1 MB. Therefore, the overhead of Oracle making a call to read 1 MB are experienced only once. If the operating system allowed a maximum of 256KB reads diluvium, even a reading of 1 MB measurement must be carried out as 4 separate calls to the OS (and, recursively, 4 separate calls to the OS for the storage subsystem). We try to reduce the number of calls from software that we do. We cannot reduce the time of access and reading (but allows us to achieve more high "parallelism" in readings striping).

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• stop the email addresses in the table in the spreadsheet to launch mail

  I am compiling of data in a worksheet Numbers and many cells in the table into them from the e-mail addresses.

  Whenever I tap on the cell that contains an e-mail address, he jumps to my Mail application and launches a new mail with the email address. It's so irritating cos I have to type on any address in the table and I DON'T WANT my Mail App to launch. How can I stop this madness? Help, please!

  Hi helix.

  

  Drag the column wide (or Panel Format > table > column)

  

  Click on the white space to the right of the link to select this cell without activating the link

  

  Now, edit

  

  Tested on a MacBook Pro with numbers under Mac OS X El Capitan 10.11.5 3.6.2

  Kind regards

  Ian.

• How to listen to music offline in the iphone?

  How to listen to music offline in the iphone?

  This article will help you to Add music to the music catalog to Apple to your library on your iPhone, iPod touch, Mac, or PC - Apple Support

• How can I display the table of contents for the iPod Touch to 6

  When I opened first of all iPod Touch Users' Guide, I used the table of contents (TOC) to locate and access sections in the manual. But, after looking through the manual for awhile, I tried to return to the table of contents, but it wasn't there! I have tried various things to see if the table of contents are being hidden, or if in some way, it has been deleted. Anyone can shed light on this mysterious event?

  What is the version of iBooks that you speak? There is an online version here: https://help.apple.com/ipod-touch/9/ Aha, I see the table of contents on the left disappears if you zoom before or make the narrow window and reappears if zoom you out or make it larger.

  TT2

• How can I create a custom button to format the table borders?

  I often paste to Excel in a message e and would like a button or a context menu for the PROPERTIES of TABLE FORMAT it takes 2-3 clicks each time to access. Is there such a thing? I searched the Add-ons nothing helps. There may be a change in config I can do which would have the table to stick with borders already in place (I have to change the thickness of the border on '1' each and every time that she missed to '0' - maybe there is a place to have it by default on '1'?)

  I have attached a picture of the menu on that I wonder.

  I don't know of a setting for this...

  It would be easier to click on, but based on underscores bit indicating the keys Accelerator, the keyboard sequence would be:

  • ALT + o b o
  • ALT o b o

• The tables of my site are off right in Firefox only.

  I recently downloaded a new site. The table in the Center is off the right on all pages.

  www.baxterdentalclinic.com

  Any input would be helpful. Thank you!

  Good fishing Jefferson!

  Add this semicolon missing in the Syle editor immediately fixes this issue.

  #nav {
  	background: url(full-header.gif);
  	height: 38px;
  	width: 850px;
  	margin: 0 auto;
  }

  Note that the Web Console (Firefox/tools > Web Developer) can be used to find such errors.

  Expected color but found 'height'.  Error in parsing value for 'background'.  Declaration dropped. nav.css:10
  Expected ':' but found '850px'.  Declaration dropped. nav.css:11
  Error in parsing value for 'background-position'.  Declaration dropped. nav.css:65
  Expected ':' but found '850px'.  Declaration dropped.
  

  There is also a colon missing with 850px width; rule 360dental.css

  #nav {
  
  	height: 37px;
  	width: 850px;
  	margin: 0 auto;
  	background-image: url(/Images/page_images/nav.png);
  }

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• Changing the font styles in the table of contents usingpages 5.6.2

  Hello

  I am writing a scientific assignment and I have some titles that contain italic characters such as: Importance of Bacillus cereus

  When I create a table of contents, these italics seem to disappear and I can't do these italics without making the entire table italic material - that is not what I want.

  I also have the same problem with the degrees symbol which is great script in my titles, but appears as '0' in the table of contents.

  Can anyone help please?

  Thank you!

  When you build a Table of contents, Pages v5.6.2 uses a brush regular Helvetica on all text in the generated TOC. He made his farewell to all the attributes of fonts can set up for your titles and headings. We can not selectively reapply text attributes to a part of a table of contents entry.

  If I use the degree symbol in the title or the title paragraph style, she survives as baseline Exhibitor in the generated table of contents. My degree symbol is entered as shift + option + 8 (on a U.S. keyboard).