computer says please insert a disc when I insert the dvd

Similar Questions

• Transfer problem - files Transfer Wizard says "Please insert the disc 1'... If I select OK it tells me the wrong disc is in the pc"

  I did a PC Restore on my Dell, I saved my files on USB 3... now it's time to download them again, the transfer Assistant tells me that "transfer is underway" and files are "fly through the window". But another window appears on the screen telling me "Please insert the disc 1'... If I select OK it tells me that the wrong disk is in the pc... it isn't." The transfer takes an age without a movement minute on the bar "load..." Any suggestions?  Kind regards.

  Did you just copied the files to USB devices or did you use some kind of backup software?

  If the latter, what is the name of the application?

  If the former can, you go to (at least one of) files on the USB key (for example, to open it)?  And what happens if you try to just copy one of the files (and use 'copy' rather than 'move' to ensure that the file on the USB device is not removed).

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• How can DVD - rom disabled computer says it has a code 22, I get the dvd - rom to work

  My toshiba laptop, I cannot activate dvd - rom. He says I have a 22. code can you tell me how to activate the dvd - rom. thank you...

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask questions in the forums on
  known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  =================================================================

  This problem may be caused by the presence of too many CD/DVD programs competing for resources,
  especially by these programs that run at startup.

  Code 22
  http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

  How to fix the Code 22 errors
  http://pcsupport.about.com/od/errorc/a/code-22-error.htm

  How to enable a device in Device Manager in Windows Vista
  http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A350-12J said to insert the DVD + "this is a system error.

  I recently bought a toshiba Satellite A350-12J...
  The computer tells you to insert the DVD + this is a system error...

  Please insert the DVD - disks to perform backup of the recovery disks.
  I hope it is of some help, I am now almost bald of pulling my hair!

  Hello

  You are not able to boot the system? Or what?
  What happens if you press F8 immediately after the laptop was turned on?
  You then see the start menu?

  If you can access the advanced boot menu, then you could try using the option called last good known Configuration (Advanced).

  If this will not help and you will not be able to restart the laptop then choose fix my computer-> Toshiba HDD recovery and reinstall the OS using the Toshiba HDD recovery option.

  See you soon

• When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  Hello

  Please visit the following link to download: -.

  Download Creative Suite 6 applications

• When I try to run Age Of Empires with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  Former title: Trouble running games CD, post installation under Vista. That is to say 2 AoE, Warrior kings.

  I have vista on my laptop, I installed games like shogun and medieval total war and they both work perfectly, I tried to put it on the age empires and warrior kings: battles who are also on a cd format, I installed the last but they usually run after that. Although the instialltion is over, I get asked if I wanted to leave the program to run as administrator. : s

  DVD/CD drive recognize there is a disc, but does not work automatically. I can't install the program normally when I run the setup.exe for the game. When I try to run the program with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  I tried to run them in compatibility mode, using all variants. and also I tried soome of advice from the help article about the disk drivers. game discs are clean and one striped.

  Why can I install the program and access the drive to use the files it contains, but then not use the disk?

  Hello
   
  
  This problem may occur if one of the following conditions is true:
  a. you do not use the game disc to start the program.
  b. the CD player is not compatible with the program.
  c. using a copy of the program CD.
  d. you are not connected to the computer as an administrator.
  e. the programs interfere with the start of the game which is running but is invisible to you.
  f. the CD-ROM drive uses out-of-date drivers.
   
   
  I would ask you to try the methods listed in the article below:
  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.
  http://support.Microsoft.com/kb/228985/en-us
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to run the system on gateway mx6453 recovery, recovery begins a box opens indicating the system restore is incomplete, please insert the cd or dvd

  try to run the system on gateway mx6453 recovery, opens the recovery page, but then appears a box that says system restore is incomplete, please insert the cd or dvd.  the recovery partition seems to agree.

  Hello

  · Why are you running the system recovery?

  · Are you able to perform system restore on the computer?

  I suggest contacting the manufacturer of the computer, the link you can check: http://support.gateway.com/support/default.aspx?cmpid=topnav_support

  For reference: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• Request for emergency assistance. -CS6 adobe Master Collection - please insert the disc

  Our company has downloaded Adobe CS6 Master Collection for deployment on our image master this year.

  When you try to install using the files we downloaded and ran the disk hard that the installation said "Please insert the disk", it should not be necessary, as I already have all the files required to install on my computer.

  I need a quick fix to what I have to get this master image made and deployed next week or two and I have hundreds of machines to do on.

  It's a clean install and so there is no problem of compatibility with previous programs, I tried looking for installs it individual programs themselves in cases without success, I had a similar problem with the Autodesk products that I solved it by installing the trial version and then upgrade to version full immediately after installation. I have not tried that with this problem but I'm sure there is a better way to solve the problem. At least I hope there is. Please get back to me as soon as possible with this because I have to get this sorted out within a very tight timeframe.

  Hello ksatech,

  a first information please read this: Re: CS6 install question asking to insert the disc, but install desktop.

  Good luck!

  Hans-Günter

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please insert the disc 5_5 CS to continue installation of the electronic version purchased

  Please insert the disc 5_5 CS to continue installation of the electronic version purchased

  I used Firefox to re-download the software and installation now works. Thank you.

• Error: "Please insert the disk:" - customer-delivery - ppd.xrm - ms ".

  I'm trying (for over a month now) to install FSX on my machince to Windows Vista.  I have more to satisfy the standard requirements for installation.

  I installed FSX successfully a couple of weeks.  However, the activation code provided in the package was "invalid".  The activation of product in the FSX folder open-therefore, I have found a number of phone, but without opening the application, I did have an activation screen number.  So, I could play for no more than 30 minutes.

  I uninstalled FSX to try to reinstall and activate.  Now, when I'm in the installation phase, disc 1 is complete, and almost all of disc 2 ends when I get the following pop up: "Please insert the disk:  It is not a disc number, that's all just empty.  The file that it is stuck with trying to install is "C:\".... "Licenses\client-deliverance - ppd.xrm - ms.  (I have a Windows Vista activated, so I don't know why it's having a hard time to verify the license, if it, in fact, that this file is trying to do.)

  I did a system restore, and I still get the same message when installing.

  Any ideas or advice on fixing it?  Next steps?  And, I can't reinstall Windows.  I lost the software.

  X11creed, wait no response from MS, take a look at this:

  http://flyawaysimulation.com/postt27803.html

  Look at the last message in cheezyflier. It works!

  The link for the cleanup utility does not work, but you will find with google or MS, do not mix when he says this is office cleaning uility or so. This works.
  Do so by following the instructions, my problems went away and I reinstalled just clean copy.

  See you soon,.

  SUP

• Blue screen when you insert the DVD - M40X

  Hello
  I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
  After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
  I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
  Is there a solution to this?

  Hello

  Well, as the support service team say that the DVD player is not able to read this format.
  But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
  Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

  Good bye

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• Stop/Fix "Please insert the last disk of all selfextracting and click OK to continue.

  (With the help of Win 7 32 - bit update)

  I have not used a disk of 3.5 inches for many years.  In addition, I have not used any device (USB, CD or DVD) that has / had problems of "whole selfextracting.

  Also, AutoPlay was disabled on my system for years.

  That said, whenever I do a search of file/folder I get "Please insert the last disk of all selfextracting and click OK to continue.

  How can I be to determine:

  1. What causes the error message and/or
  2. How to stop it forever!

  Thanks for any thoughts or ideas!

  DennisCPA

  Don't know if you've discovered this done yet for you, but I would say it is your usb flash drive. It happens when he is out BEFORE you used the 'Safely remove' icon on the taskbar.

  If it is, then you must copy any information on the USB key to another location and format the USB. Then you can copy the info on it and you're right to go!

  This will continue to happen sometimes even though you have the properties/policies defined in a quick deletion. I got mine the value of the radio button performance and ALWAYS use the icon REMOVE safe in your taskbar. Once you find that your data will be corrupted if is not removed properly, even if the ssd is supposed to be "hot." If you have a usb key that has a light on it, wait for the light to STOP BLINKING before removing it. If you do not have a light on this issue, it is always advisable to wait a second or two after the popup window say you that it is save to remove your USB.

  See you soon

  Glenn