Disc of separation during the reset of the system

Similar Questions

• Cut during the system restore? now I get no picture just a black screen refresh

  I used the system restore to fix my pc to a previous point, because I wanted a fresh reboot... Unfortunately it was closed somewhat during and now all I get is this threatening black screen that updates constantly. I don't have a recovery disc, it's a gateway DX4200.

  Hey I fixed, it was the card must have fried or something...

• What is the next step after an unspecified error occurs during the system restore

  My computer shuts down saying windows has been shut down to avoid damage.

  disable or remove all equipment recently installed software.

  System Restore does not complete successfully.

  How can I find the dates various programs have been installed. I can find the programs, but not the date they were installed.

  The problem began in mid-September, so I would like to search by dates.

  I have dates for updates to windows, but not programs other than windows.

  Hello

  This can help you with problems with the system restore:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• E521 with advanced format ST500DM002 Player - do I need a SATA driver separated during the installation of Windows 7?

  Hello

  I have an E521 with 2 GB of Ram and X 2 processor. I want to install Windows 7 on a record nine of ST500DM002 (= native 4K advanced format). It will work without hassle, or will I have to install a SATA driver during installation? If Yes, which? I can't find the necessary information for the main card.

  Thank you, Andre

  Hi Andre,

  As you would expect, you will need the Windows 7 drivers RAID so that the installer of Windows recognize the drive. Our buddy rdunnill forum explains how to do this HERE. He included a link to NVIDIA support site where you can download the driver.

• Yet 5.1 on OS 10.5.8 burn Blu - ray discs, but crashes during the generation of the same project DVD

  I spent a few weeks creating a Blu - ray disc double layer with 20 menus and 44 timelines lengths ranging from 18 minutes 9 seconds.

  The final product will be a double pack containing the replicated Blu - ray Disc and DVD.

  I have pre-transcoded DVD and BD and related assets proper. The Blu - ray Disc built properly and seems to have no problems.

  When I try to output in DVD Encore crashes almost immediately. I also tried to record just a DVD image, and it crashes at the same place.

  I don't really want to recreate this entire program in DVDSP, but that's my plan.

  Other ideas would be appreciated.

  Thank you!

  So I solved the problem by removing all the ac3 and m4v (including the related m2v) records on the SNA timlines replacing the original self-contained reference movies from FCP7. Then, I left still transcode and build from one day to the next, hop in the DVD to work one morning.

  Now, I just need to transcode again for the Blu - ray or return to a backup...

• Satellite L300D do I need mediaback disc Toshiba to restore the system?

  I'm not a very technical person and I dropped my laptop!
  Machine did not work and I had a new hard drive installed, but webcam, microphone etc do not seem to work.

  They gave me the laptop put in place as a gift and don't have disks or backup.
  The shop got my documents and photos and I got it up and working with the docs and the internet, but that's all.

  Does only I the mediaback disk from Toshiba to restore all systems?

  Thank you for your time.

  Hello

  You want to get the new laptop and want to put it to factory settings?
  If Yes, then you need the recovery disc.

  The recovery disc can be ordered from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  It s not free but he s also cheap; subject of 30 euros

• A328 card sd during the system update error

  I'm about to update my a328 system. But when I click on continue, this sentence appear always.

  "sd card error, please check the sd card and try again."

  I don't know what went wrong. I removed the sd card and tried again, but he appeared again. What is the problem?

  Try the following.

  1. check if you have enough space in the phone storage
  2 backup your stuff then do a factory reset.
  3. download OTA again.

• Laptop died during the system recovery

  During a system recovery, my laptop died. I plugged it all in a row... but when I turned it on a message comes up. "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. "So I clicked 'OK' and it happened on the screen, he's going to when you log out, and then it restarts. After that, the same box back upward. So I shut down my laptop and when I turned it back on, it goes into the newspaper. It shows the Administrator icon and it says "locked administrator" I clicked it and it then says: "your account is disabled. Please consult your system administrator. »
  

  
  

  Is there anyway that I can make another recovery system? Help please!

  For problems/questions about the recovery process, contact the manufacturer of your laptop.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• have printer hp c309, says driver is not found, install disc stops to prepare the system to install, system can't find D:\setup\...\set\hp3prl40.exe...

  Convenience store said that no drivers are

  HP installation disk does not work (stops at the second step, called preparation for installation system)

  but the printer is recognized properly on the wireless network

  only, I don't get the option of making it the default printer

  system says driver not found WSD

  This printer works fine on my computer compaq laptop

  I can't make it work on my new toshiba

  the two win7

  Clean boot the PC http://support.microsoft.com/kb/929135

  Then install from the cd HP

  PS Troubleshooting will not help in these circumstances, other that provide the answer obvious re no driver

• Laptop stuck closed during the restoration of the system

  Laptop is stuck during the system restore? If I turn off computer manually by pressing the power button / stop it will mess up computer?  How can I fix it? The display shows 'Shutting Down' he was slaughtered like that for 2 hours now. Help, please?

  It is likely mean restoration of the system has failed for any reason any and therefore find it difficult to restart because of this.

  You may want to wait for someone a little more expert than me but normally peak I power the laptop through the main switch off and restart it.  At the start of the computer laptop once again he can ask you to start windows normally or in safe mode and you can then happily that we restart the PC and the system of cancellation/restore again.

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• * Need urgent help * PC is off during the RESET PC, now Reset/Refresh PC do not work.

  Reset PC/Refresh PC displays an error "cannot find the required files.

  * / Please, right now I'm out of my country on INTERN and away from my manufacturer, seller or any kind of help from the workshop. /*

  PC : Sony Vaio Laptop (SVE15128CN) 8 x 64 Home edition windows, Activated and OEM product key.

  Basically my Webcam USB 2.0 did not work. So I decided to go for a complete 'Reset PC' in the definition of PC options. I went through all the sections and clicking next and Begin.  After like a few seconds only, while the process has just begun and the PC was 'reboot', accidentally someone turned it off.  When I turned it on after some time, Reset / 120 Hz PC do not work now. They show "cannot find the required files" error.

  I think there are a few problems with my hidden Recovery Partition which is now can be damaged due to sudden power loss and cannot be launched now. I have not at any installation media or recovery disc.  During this time, now when I select the option 'Create the recovery drive' in Control Panel, the option "Copy recovery drive" has not been highlighted and cannot be selected. It also shows the same error of missing necessary files. I REALLY NEED TO SET THIS Option RESET/REFRESH not a workaround solution.

  Use the System Image backup

  You can still use System Image backup in Windows 8/8.1.

  "In Windows 8.1 System Image backup.

  https://www.WinHelp.us/system-image-backup-in-Windows-8-1.html

  "Tip windows 8.1: using the System Image backup.

  http://winsupersite.com/Windows-8/Windows-81-tip-use-system-image-backup

  'Restore a System Image in Windows 7 and 8/8.1'

  https://www.WinHelp.us/restore-a-system-image-in-Windows-7.html#reimage

  ______________________________________________

  These are very good programs to use for the backup of the computer and is free:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Welcome to EaseUS Todo Backup manual"

  http://www.TODO-backup.com/support/help/

  http://www.TODO-backup.com/download/docs/User_Guide.PDF

  ______________________________________________

  "AOMEI Backupper Standard."

  http://www.backup-utility.com/free-backup-software.html

  "Configure and automate of AOMEI Backupper in Windows"

  https://www.WinHelp.us/configure-aomei-backupper-in-Windows.html

  _____________________________________________

  "Macrium Reflect free"

  http://www.Macrium.com/reflectfree.aspx

  «Macrium Reflect Tutorial»

  http://www.Macrium.com/webtutorial/tutorial.asp

  See you soon.

• FF reset does not removal icon tools during the restart. Any ideas?

  After you configure my toolbar with the new menu on the toolbar, it keeps removing most of the icons during the restart. Not even for the menu, but remove them completely for the big bin of unused features to the left of the mode menu customize. I have reset Firefox by the suggestion of support page, but this had no effect. Oddly enough, I didn't this problem after upgrading to version 30 on my laptop, only on my desktop. Any suggestions? I'm on a Mac Pro, running the Mavericks.

  The current releases of Firefox store customization of the toolbar in the browser.uiCustomization.state preference.
  You can review and edit the prefs Subject: config page.

  • http://KB.mozillazine.org/about:config

  You can check for problems with preferences.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• screen stuck on the logo of apple during the forced reset

  I bought an iPhone 6s + 16 gb.its iOS version was 9.1

  during the update iOS through the phone, the screen turns black but tithe.

  nothing start reset forced up.with (sleep + "home" button), stuck on the apple logo and nothing starts.

  What should I do?

  Thank you.

  I try again the forced reboot, but if it fails the second time, try putting the phone into recovery mode.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports