Dynadock not power USB ports

Similar Questions

• 8460w some (not all) USB ports not working not

  8460w running Windows 7 x 64.

  2 USB ports on to the left of the computer (facing it) do not sign anything when you plug something.  All other ports seem to be in perfect working condition.

  -Updated all the USB drivers

  -Confirmed that nothing is turned off in the BIOS

  -Uninstalled all drivers USB, stop, removed all forms of power, held the power for 1 minute and let stand for 20 minutes

  -HDD Ran, start-up and break-in of diagnostic tests

  -Replacement motherboard

  -Repeat everything with the new motherboard

  There is no windows error, no bubble popup in the system tray and no problems in the system logs.

  Literally my mind stops there.  Can anyone think of anything anyone else I can try?  Any ideas AT ALL would be great.

  Thank you.

  Workaround.

  There was a missing element that was supposed to be bundled with the Systemboards.  It's a small daughter card that inserts directly behind the USB 3.0 ports.  Once I found on another computer, I was able to use it in this machine.  Thank you for your time.

• Satellite M30x not recognizing not all USB ports

  My Satellite M30x has recently ceased to recognize all USB devices are connected that he, being a huge super biff computer I can only assume all my USB ports are totally exhausted.

  If anyone has any other theories id be more than happy to hear... Thanks :)

  Hello

  Something similar happened on my laptop. The laptop has stopped to recognize the external device (USB HDD). Someone told me that it happened because I used the safely remove. Usually, if you want to for example disconnect the USB HDD or USB key, you must use the remove before disconnecting the device from the laptop.
  I just deleted all ports USB device and Manager after restarting the laptop operating system recognized all the USB ports again. Further, I have connected my external HARD drive, and it worked!

  I put t know which external USB devices you use, but sometimes the machines cannot be allowed because the ports USB don t provide enough power.
  In this case, you can disable the mode without power failure in the USB hub properties in Device Manager.

  Good luck

• Portege M400: Not recognized USB Ports

  Hi all

  Due to some problems with the USB ports (they have recognized that some devices), I decided to delete their entries in the management of devices, Universal Serial Bus. I did it because even the Toshiba site offers, as the next restart should result in automatic recognition of the USB ports.
  Unfortunately, it didn't in my case. My M400 asked me the CD with the drivers (?) and four yellow dots to mark appeared as unknown devices in the list of devices.
  Then I tried to install the latest update of the chipset utility, but this does not solve the problem.

  What could I do? Is there anything other missing?
  Thanks in advance for your attention.

  Hmmmm... This very strange art. All that you have done is just. When you write problems with the USB ports can you please tell us what was happen exactly?
  I just hope there is no hardware problem.

  What do you think about recovery of laptop? I know, this is a more radical method, but if the problem persists after you retrieve laptop there may be serious hardware problem.

• plotter / cut not the usb ports

  I recently moved my office and cutting cutter / plotter in another room. Now, for some reason, my vinyl cutting software does recognize not all USB Com Ports and therefore, will not cut.  (I tried configuring it for each port with no luck). When I open devices and printers and look at USB / series of properties of Strawberry, it shows that its on Com9... and I have 6 USB ports I know.  First question... where I expect to identify the USB ports are what #s.  4 behind the pc and 2 in front.

  Com is a reference to the COM port and is a "serial port".  Replace the USB port.

  PS <>, change the hardware configuration does not cause this problem.   Someone changed the settings.

• C510a: C510a software will not install on the new Dell laptop - can not find USB ports

  I just bought a new laptop Dell 7710, running Windows 7.  When I try to install the driver software for my printer HP C510a, Setup performs a check of the system and tells me that I don't have a USB port, and the option that provides the installation routine is to interrupt the installation.  I have 4 ports USB 3.0, which work very well with any other USB device that I've plugged into them.  I downloaded the latest version of the software C510a driver and still have the same problem.  I really same useless USB port on the printer because I connect via my WiFi network.  I run HP diagnostics in order to try to identify the problem and that they can find the printer and identify it on the WiFi network, and they also recognized as USB ports.   But the software C510a stilll don't have USB ports and refuses to load.

  How can I get HP to fix their software driver for a product that is not common, but always prints as well as ever?  It is also mute to require the presence of a port which is not required to connect to the printer.  If I replace theis printer in order to print from this computer, the replacement will certainly not be another HP.

  Hello.

  Inside, File Explorer type folder in the address bar and press ENTER.

  Search the last HP installation file that begins with 7Z (e.g. 7zs1234)

  Open the installation folder.

  Find the file usbready.exe and rename it to usbready.old

  Browse a level upwards and double-click Setup.exe, now follow the installation and check for the difference.

• After shutdown still power USB ports

  When I used Bootcamp and Windows 10 on my iMac 27 "(end of 2012), the USB ports are still less power when I shut down the computer to Windows. A USB powered external hard drive and a USB hub are still active. When I shut down the computer from Mac OS X ports are powerless. Why is this?

  Can you check Windows quick start?

• I have a Robin Didital DPF - 710 photo frame, but there was not a usb port, how can I transfer photos from comp to a memory card

  I HAVE A DIGITAL ROBIN PHOTO FRAME DPF-710 FOR WHICH THE CARD MEMORY IS 1.0 GB, THE PROBLEM IS I WOULD ADD MORE PHOTOS ON THE CARD BUT DO NOT KNOW HOW TO IT AS THE IMAGE HAS NO USB PORT AND I WOULD LIKE TO TAKE PICTURES ON MY COMPUTER TO THE MEMORY CARD, COULD YOU PLEASE ME TELL HOW.

  I guess just that your computer has a media player?

  (If no drive media... Connect the device to your PC
  via USB cable and turn on... Reach... Start / computer...
  your camera must be listed with a drive letter.)

  If you go to... Start / computer... media player should
  be recognized as one or more removable disks... it can
  have several drive letters.

  Removable disk (e :))
  Removable drive (g)
  Removable disk (h :))

  Left click the drive letters... When you identify the drive
  Letter for the media player... (it will be the one making
  does not launch a dialog box that says: "Please insert a disk".
  in the drive? ») ...

  Follow these steps...

  Navigate to the folder in which the photos are... Open it and
  Reach... Edition/select all... right click the selected (highlighted)
  Group and from the menu choose... Send to / removable
  Disk?... Or... left, click on a folder and do the same thing.

  Only a limited number of files can be copied to the root
  Directory of the card... if you transfer lots of photos...
  they must be in one or more folders. If you receive one
  error that says: "cannot copy xxxx (xxxx): the directory '.
  the file cannot be created. » .. There's too many files in
  the root directory of the memory card.

  FWIW... the camera may not recognize the photos if they
  have been published in some way, but they will always be on the
  memory card for use by other means.

• Windows 8 recognizes not all USB ports

  Everything I plug my usb ports is not detected. All my USB drivers say this: the software for this device has been blocked from starting because it is known to have problems with Windows. Contact the supplier of material for a new driver. (Code 48)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  Seeking solutions does nothing. Any suggestions?

  OK GUYS - HERE'S THE ANSWER:

  For starters, I had the exact problem as OP. I upgraded my windows 7 to Windows 8, about 2 weeks ago, and all of a sudden all 8 of my USB does not work.

  I had MS Answerdesk Diagnostics TWICE to try to solve this problem, the last time they said that their agents of level 2 had to work on the computer (but never called).

  After looking online for the past 2 WEEKS and no answer final as to really solve this problem, CKnospe option actually worked, but I had to do one thing first:

  I was going to install and uninstall the program to see if there is nothing, since HAVE charger didn't appear on the list of population programmes.

  There were 3 options after I unpacked and loaded Setup program. Repair, installation and the bottom option was 'DELETE '.

  I chose to delete, as I didn't even know the program was on my computer (doesn't appear on the list of population programmes) and he forced a restart.

  After the reboot: BOOM, my USB FUNCTION.

  Hope that anyone looking for an answer to this tent I've done. I can't express how I am happy with this easy as pie. Seriously joygasm here.

  Peace.

• Dynadock - USB Port Replicator does not recognize any USB keyboard

  Hi can any body help?

  I have a Satalite pro L300-154 with a Dynadock - Replicator to USB Port, but it will not recognize any usb keyboard.

  Have you checked if the laptop would recognize the external USB keyboard connected directly to the computer laptop s USB port?

  Please check this!

• Faulty USB Ports &amp; Solutions possible

  Hi all, my first post. So is everyone.

  I have a 15 "mid 2012 Macbook Pro which is now defective USB ports, I took it to a repair

  a specialist who said it would cost a lot of trouble and would be a difficult task.

  I have to push a device or a cable down hard enough so he could read once I insert it

  in the port and keep up the pressure if I want to read or write.

  Now, I thought that a thunderbolt port was just for the video, but I found the following: (crush on usb hubs)

  https://www.Amazon.com/Thunderbolt-USB-Gigabit-Ethernet-adapter/DP/B00T9LI7CO/re f = sr_1_7? s = electronics & ie = UTF8 & qid = 14656...

  http://www.bhphotovideo.com/c/product/1075056-reg/kanex_ktu10_thunderbolt_to_usb _3_0_esata.html

  Will this work on my mac? Or are there other ways for me to get the capability of USB back to? I need at least a USB port for my drawing tablet. Thus, a port would be nice.

  Any help will be appreciated.

  MM

  Cape Town, South Africa

  The two cards you access both should work.  The eSata connection is probably not a good option for you.

  If you can not the USB ports repaired (which usually requires the replacement of the logic board) consider something suc as this:

  https://eShop.MacSales.com/item/other%20World%20Computing/TB2DOCK12P/?utm_source = google & utm_medium = shoppingengine & utm_campaign = googlebase & gclid = CPL8rPSuos0CFcQj gQodc8oGog

  It is not cheap, but cheaper than a logic board.

  Ciao.

• NEX - 5N, unrecognized by the USB Ports of the computer

  I have a laptop Asus UH56e which became more and more incompatible with my NEX - 5N. Is not what USB port, I plug the NEX in, or what USB port in my 4 ports USB hub, I plug in, the camera is not recognized by Windows 7. I try to install the new update of firmware and can't even get past the first step, which is the connection to the computer. Is there anywhere I can download the driver for the NEX - 5N install on my laptop? It seems that the driver is not install from the camera, or is not recognized by Windows 7 (64-bit).

  Yes, it shows USB MTP Mode, but it does not connect to Mass Storage. By clicking import images and videos results in no new pictures or videos found on this device, despite the fact that there are pictures in the camera. Click Browse files and media then, however, shows the folder and clicking on that, I can see the image files and copy them to a folder on my hard drive. Yes, I tried to update the firmware several times, but because the camera is not recognized by the USB ports, the camera is not found by the firware update, either. Yes, I unplugged the USB hub and all other devices and also makes no difference. I don't have another USB cable, however. I have access to another PC Thursday, so I'll check then. Thank you, Glenn.

• Can I add additional USB ports?

  We just bought a pack of PC HP Pavilion p7 1036b.  There is simply not enough USB ports.  Can we add additional ports?

  Hello

  Yes you can, you can buy a USB hub called device such as this. They are many around.

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=18565

  (You can buy USB3 now for futuer usage)

  Kind regards.

• How to configure a printer LPT when adapted to use a USB Port - Windows Vista Home Premium 64-Bit

  I have a computer that does not have an LPT port, and the printer that I want to use (EPSON Stylus Color 850) is not a USB Port or Ethernet.  I bought a cable USB2LPT and attempted to get the printer to work.

  My problem seems to be the choice of the port to use.  Here are the steps I followed:

  1. pick "Add a printer" of the control panel. Printers
     2 choose 'Add a local printer' (even if using the USB Port, like when I plugged the USB cable into the computer, I received the message installing driver recognition but not familiar "bong".)
     3 selected "use an existing port.
     4 select "USB001 (virtual printer to USB Port) - it was my best estimate of the long list provided."
     5 choose the EPSON Stylus Color 850 ECP2/PCS.

  The pilot was then installed without error and tried to print a test page which is that hangs without error.

  I deleted the printer then tried to assign the LPT1 port.  No help here either.

  If someone can help me with the installation, so I can get my documents to print I would appreciate it a lot.

  Thank you

  Dave

  You do not have an LPT port.  When you select the LPT port data are always written him even if your computer does not have the hardware installed to make it work.  It would work if you have installed a parallel PCI Port card.

  USB001 would be the first choice, then USB002...

  The next step as Fouzan points out is to contact the supplier of cable or Epson for support of printer you.  Start by Epson.

  You can try other cables, parallel PCI card or another printer. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.