screen stuck on the logo of apple during the forced reset

Similar Questions

• MacBook Air screen stuck on the circle with bar oblique?

  I bought a MacBook Air on Friday last and just received in the mail today. I started up and followed all the prompts that he gave me. He then went to a screen that says "set up your Mac", and it was on this screen for hours then I looked at how to fix it. I found an article that said hold down the CTRL + SHIFT + option, press the power button, then release all buttons. I did this and then restarted my laptop. It made the normal chime, then shows the apple with a loading bar logo under it (as when you update software), then it goes to a screen with a circle that has a slash through it. The cursor does not appear and it does nothing. I don't know what I've done for her, but no matter who else has experienced this problem and found a resolution?

  Screen of Mac OS X - grey or prohibitory sign appears during startup

• Cannot get to the menu screen stuck on the screen where it shows the airtime and choosing a wi fi network.

  I can't connect to the menu screen. The only screen is related to the airplay and wi - fi networks.

  What generation Apple TV you have?  What he does? that is unresponsive to the remote control, does not connect to WiFi selection etc. can you reset the device?  How about a power cycle?

• Touch screen stuck on the message.

  Touch screen on printer suddenly displayed, "checking device. This process may take several minutes. Do not turn the unit off. "This has happened since yesterday. I don't know how to get out and I can't use the printer. Help

  Do a hard reset:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/how-to-perform-a-hard-reset/TD-p/2529097

• Impossible to load Windows Vista, screen stuck at the loading screen (green cursor will move to the right)

  Last night I tried to Hibernate my laptop (Windows Vista 64-bit), but it took forever so I held the power button to stop it. When I started it today, however, it would not load windows. I tried loading in safe mode, but it stops at crcdisk.sys. I tried using the automatic repair tool to find issues. The first time, it took about 2 hours to fix, but once it asks me to click 'Finish' to restart, it restarts and arrives at the black screen with the Green loading thing goes from left to right. It remains to this screen for minutes, hours. I also tried to boot from the last known good configuration, and this does not work either. I tried to restore to a previous point, but there was no previous system restore point. Windows was working fine the night before.

  Thanks in advance for any help.

  Sean

  The symptoms you describe point to a faulty hard drive. Hard drives can appear to fail suddenly like this so the fact that he was 'before' is irrelevant. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• Stuck on the Apple Logo screen

  My phone froze so I restarted. It got stuck on the apple logo screen and I tried to restore it. When I have it plugged into my laptop it would not restore because my boot drive is full. I tried to remove as much as I could turn off my laptop and emptying the trash and nothing will work. Its been sitting stuck/frozen on the logo of apple for 4 hours now. How can I fix it?

  Only way runs a restore via iTunes by putting the iPhone in recovery mode

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• AppleTV stuck on the screen with apple - I restart, held buttons...

  When I start my AppleTV he is stuck on a white screen with the Apple and black background (I can't move a plus). The light on the AppleTV has a regular blinking. 2nd generation (black with silver remotely).

  I tried unplug, wait a few seconds and plug it back

  I tried to hold the menu drop down and hold until the light on the AppleTV flashes very fast and

  Same result in both cases - stuck on the black screen with the white apple logo.

  Start here: get help with audio, video or power on Apple TV - Apple Support.

  TT2

• iPad stuck on the apple logo

  IPad is stuck on the Apple logo and halfway along the slide to download

  was reset as the wifi would not connect

  This can help:

  Press and hold the power button / stop and the Home button at the same time, the corners of the black screen,... .in taking... When you see the white apple logo appear to leave bot buttons go.

• My iPhone 6 is stuck on the apple logo

  My iPhone 6 is stuck on the apple logo. If I put it to download it just stays like that or it stops and says it has no battery, even when plugged. I can't enter in recovery mode because my home button just stopped working out of the blue. I don't know what to do.

  Charge the battery for an hour and then try the recovery mode.

• Stuck at the apple logo & no backup to restore

  Well, I have an iPhone with ios 9.3.3 6. When I turn on my phone it stuck at the apple logo and after 10 seconds it turns off and when I turn it on again, same question.

  • Not having iTunes backup
  • No effect after hard reset
  • Tried to resolved via Recovery Mode, updated and restored but the problem is always there, always stuck and goes off

  Did you put your iPhone in DFU mode before resetting?

• iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

  I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

  Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• Help! My Apple Watch is stuck on the screen of weekly activity

  Hello

  My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

  Hello

  There should be a link to the upper left corner of the screen.

  Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.

• Start stuck at the Dell logo screen

  Hello

  I have an inspiron nine 5447, which was working fine until yesterday. If I try to start now, it's just stuck to the Dell logo and I can't go in the BIOS settings. I tried pressing F2 and F12, but the screen is still stuck at the same screen of the Dell logo. Can someone help me with this.

  Thank you

  Nikhil

  Hi Nikhil,

  External devices (except AC adapter) connected to the computer. If so, disconnected the and try to turn on the computer.

  If it's the same situation, and then turn the computer off. Key down, then and now the power of FN key on the computer.

  In the case, the computer is blocked at the Dell logo. It's a hardware problem, contact Dell Technical Support in your region to replace the parts.

  I hope this helps...

• Pavilion x 360: tour of laptop computer during the upgrade to Windows 10 stuck on the hp logo

  I was upgrading the laptop for Windows 10 and after that it restarted, it got stuck on the logo of hp for about 30 min. I turned it off about 3 times and it is still stuck on the hp logo.

  Once the recovery to Win 8 is completed, considering the upgrade to 10, here are some tips:

  > http://support.hp.com/us-en/document/c05195282

  > http://support.hp.com/us-en/document/c04730900

  Make sure all your drivers are updated before moving to 10 - use HP Support Assistant

  Make sure you that all of your software security (AV, firewall, etc.) is uninstalled before upgrading - reinstall the upgrade of the post.

  If you decide to not upgrade, please note that Win 8/8.1 is good OS and will be supported by Microsoft until the year 2023.