Disconnect USB gives the signal of error on the touchpad
Hi when the connection to my win 7 64 bit computer HP laptop, with my touchpad, it works fine most of the time, but when disconnect, I get an error on touchpad saying something Ouch this device didn't like that. This happens whenever I disconnect the touchpad. I use removal of material safely every time.
I'm doing something wrong.
I think that my laptop has 2 x USB 3 and 2 x USB 2.
any help would be greatly appreciated.
Ralph :-)
just saw a solution, I think that, on another post tonight.
appears instead of right-clicking on material, remove and eject this unit, I have the drive of webOS a click right and choose eject, that seems to work without error, now, thank you.
:-)
Tags: HP Tablets
Similar Questions
-
How to install this update and resolve problems of USB and the touchpad?
I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.
The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.
This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
Driver revision history:
Twinhan VP704A Driver Release Notes
-------------------------------------------------------------------------------
Note:
1. in the event that the system hangs when running with VP704A, please install ULI
Host USB 2.0 in \ULiUSB20Driver driver2. for XP/SP1, please update with the patch in
3. in XP/SP1, update driver will crash the system, while the new facility is ok.
The trick to update driver XP/SP1 is illustrated in the following steps,
a. uninstall the driver
b. disconnect and reconnect the USB device
c. install the driver
4 to support the controller remotely, please launch Agent.exe in \Agent.
Further details at \Agent\Readme.txtKnown issues:
1 multi-instance is not supported
2 remote wakeup is not supported
3. strong use of the processor from analog video/audio capture
4. bad Signal using color YUY2 format IST
5 AV sync if audio captured the wrong filter.
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
6. noise with analog TV and FM Radio
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)Driver revision history:
-------------------------------------------------------------------------------
2005-10-24, version: 1.0.2.8
Bugs fixed and new features:
1 is not correctly configured.
-------------------------------------------------------------------------------
2005-10-21, version: 1.0.2.7
Bugs fixed and new features:
1. the firmware version read FLASH OK!
-------------------------------------------------------------------------------
2005-10-14, version: 1.0.2.6
Bugs fixed and new features:
1.MUtil - access driver empty part lower part of screen when IST!
2.MUtil - access HCT pilot check fix crash!
-------------------------------------------------------------------------------
2005-10-07, version: 1.0.2.5
Bugs fixed and new features:
1 tuner turns off when S-Video, Composite.
-------------------------------------------------------------------------------
30/09/2005, version: 1.0.2.4
Bugs fixed and new features:
1.agent.exe update for repeat bug!
2.TI5150 sign up to fix video Format!
-------------------------------------------------------------------------------
2005-09-29, version: 1.0.2.3
Bugs fixed and new features:
1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
2 reset TI5150 when a new frequency is defined
-------------------------------------------------------------------------------
2005-09-27, version: 1.0.2.2
Bugs fixed and new features:
1. difficulty I2C unstable access on some devices.
-------------------------------------------------------------------------------
2005-09-23, version: 1.0.2.1
Bugs fixed and new features:
1. analog TV becomes sometimes darker.
-------------------------------------------------------------------------------
15/09/2005, version: 1.0.2.0
Bugs fixed and new features:
1. difficulty of installation INF for Windows 2000.
2 FM scan radio policy changed!
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.9
Bugs fixed and new features:
1 USB string serial number not visible with USBView, updated firmware required.
2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.8
Bugs fixed and new features:
1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
-------------------------------------------------------------------------------
12/09/2005, version: 1.0.1.7
Bugs fixed and new features:
1. improve the performance of check channel lock status
2 pinnacle INF Fix.
-------------------------------------------------------------------------------
2005-09-09, version: 1.0.1.6
Bugs fixed and new features:
1. Add an audio initialization function.
-------------------------------------------------------------------------------
2005-08-31, version: 1.0.1.5
Bugs fixed and new features:
1 separation of PAL and NTSC resolution mode.
-------------------------------------------------------------------------------
2005-08-30, version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2 frame drop.
3 pinnacle inf file HCT chkinf fail.
-------------------------------------------------------------------------------
2005-08-22, version: version 1.0.1.3
Bugs fixed and new features:
1. add remote control interface in digital source filter.
2.A new remote test tool that contains of the source code in \Test_RC.
-------------------------------------------------------------------------------
2005-08-16, version: 1.0.1.2
Bugs fixed and new features:
1. Pinnacel & Twinhan driver & file reorg.
2.VP704A_BDA_Test tool, add a test to the system code.
3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
4 firmware update
-------------------------------------------------------------------------------
2005-08-15, version: 1.0.1.1
Bugs fixed and new features:
1 serial number feature is lost when the audio volume of the TV control
2.RC6A support CIR
(This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
EEPROM must be flashed with \Firmware\M9207.bin)
3 Serieal, MAC address and name of device OEM taken in charge.
Please see for more details on the \Firmware\readme.txt.
4 Ioclt example source code included.
-------------------------------------------------------------------------------
08/08/2005, version: 1.0.0.10
Bugs fixed and new features:
1. increase audio volume analog TV.
-------------------------------------------------------------------------------
04/08/2005, version: 1.0.0.9
Bugs fixed and new features:
1. analog TV Video mode failed.
-------------------------------------------------------------------------------
2005-08-03, version: 1.0.0.8
Bugs fixed and new features:
1.off - centerf frequency scan + / 125Khz
2 difficulty program a copy scanned in MCE.
-------------------------------------------------------------------------------
02/08/2005, version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
2. improve the stability of I2C communication.
3 unify signaling resistance & quality as a THBda ioctl interface.
4 capture filter lock state control.
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.5
Bugs fixed and new features:
1. the same strength & quality signals as VP7046.
2 debug build pilot
-------------------------------------------------------------------------------
2005-07-21, version: 1.0.0.4
Bugs fixed and new features:
1. put the INF update.
-------------------------------------------------------------------------------
2005-07-20, version: 1.0.0.3
Bugs fixed and new features:
1 improve performance in PCM4
2 passage of the analog TV Mode to FM Mode failure
-------------------------------------------------------------------------------
2005-07-04, version: 1.0.0.2
Bugs fixed and new features:
1. production tool FM test OK!
--------------------------------------------And here is the Readme file from the other file in the update?
************************************************** ************************************************
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
************************************************** ************************************************----------------
INTRODUCTION
----------------This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
and Windows XP.-------------------------
CONTENTS OF THIS DOCUMENT
-------------------------1. installation instructions
2. uninstall instructions----------------------------
1. installation instructions
----------------------------(Windows 98SE & Windows ME)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files in your Windows system, and then restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files to your Windows system, then turn off your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.(Windows 2000)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.(Windows XP)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-Click "NEXT".
-This program will install and load the driver and you do not have to restart the
computer.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller', proceed with the installation.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.Notice:
If you can not configure driver successfully. Please restart your system, then follow
steps to reinstall driver above.------------------------------
2. uninstall instructions
------------------------------1. open the "Control Panel" folder.
2 call the "Add/Remove Programs" icon
3 choose the "ULi USB2.0 Driver" section.
4. click on the "add/delete" button to remove drivers.-----------------------------------
Change list:
-----------------------------------
1.74
1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
2. support all USB2.0 Host Controller.
1.73
1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
4 solve problem as wirless lan will disconect when the plug in usb device.1.72
1 fix that system crash when HD USB copy large files.1.71
1. improve the management of power in Win98 / Me.1.70
1. improve the devcie detection function.1.62
1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.1.61
1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.1.60
1. in support of functions power management when a HUB with the USB plug in device
a root HUB.1.57
1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
2. fix audio problem that can not display smooth when peripheral USB connect to the system.
3. fix system cannot detect DVICE USB when the USB device attached to the system in
suspend mode.
4 fix when root USB HUB have a full load, USB HD sometimes
failure of the transaction.1.56
1 fix that device of DVD decoder cannot display correctly.1.55
1. fix OTI USB 2.0 drive hand cannot detect question.
2. attach the USB mouse cannot be used after the resumption of hanging.1.54
1. to improve the safety of the driver.1.53
1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device1.52
1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
automatically fix file system errors
2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is pluggedv.1.51
1. to improve the compatibility of USB 2.0 card reader.
2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.v1.50
1. improve the transfer blockv1.48
1. difficulty of installation of the USB 2.0 LAN driver hangs up
2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
3. fix some laptops starting hanging Win98SEv1.47
1. improve the performance of bulk transfer.
2. fix the failure of USB 2.0 Preview in bulk webcam.v1.46
1. support USB 2.0 and 1.1 devices isochronous
2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
4. improve the capacity of the device detection in Win9X / MEv1.45
1. fix system hang up when the mode standby ACPI.
2. attach the mouse sometimes does not disappear when it is unplugged.
3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XPv1.44
1. composite crutch
2 improve the detection of devicesv1.43
1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
2 difficulty at high peripheral speed detected as full-speed device
3. fix some problem of failure detection USB mouses
4. fix some problem USB 2.0 Hub failure detection
5 difficulty Win98SE crashing if ULi EHCI 1.42 is installedv1.42
1. fix PC Card eject hang up in Win98 / ME
2 difficulty of interruption/resumption hang up in Win98
3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
4. fix some failure detection of PC Card USB 1.1 devicesv1.41
1. Add new feature that system can install the driver ahead of the device is plugged in.
2. fix PCMCIA OHCI controller resources affect problem on Windos ME.v1.40
1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.v1.32
1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
If the path of the OS is not c:\windows.
2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.v1.31
1. Fix problem that driver cannot install on Windows 2000.v1.30
1 fix than Win9X / shows ME no USB 2.0 hub.
2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
3 Fix problem that sometimes when you click on "search the hardware changes.
for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
file is not found.
4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
verison of ULi EHCI controllers devices are connected and disconnected.
5 install the driver support for several features of controller EHCI ULi existing on
system at the same time.
6. determine Win2K/XP shows hub USB root for USB 2.0 hub.v1.20
1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.ULi Coporation. (ULi) web sites:
http://www.Uli.com.tw/ (Taiwan)CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.
I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.
It is said above 2 relevant and 1 right ANSWER available...
I'm new here, so anyone could direct me to these answers?
-
Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired
. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM
Hello
Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.
This is what happens:
-Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.
Solution:
-Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.
-Disconnect all USB cables except the keyboard cable (at least that is not based USB)
-Use tabs and the arrows on the keyboard to get to Device Manager
-Remove all usb drivers, including the one that is connected to the keyboard
-You may need to force the closure - the dawn of the computer.
-Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)
-By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers
-Connect all USB cables
-Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.
- and... Here we are. Bingo!
Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.
If it worked for you, please press useful Votes.
Thank you.
Ntongo
-
Original title:
First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
(running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
"one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
so I click it and and called up pop-up windows
"the usb device not recognize."
display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
"Windows has stopped this device because it has reported problems. (Code 43) »
Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpgAlso the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.
Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...
- Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
- Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
- Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
- Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
- Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
- Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)
Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)
Hello
The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.
-
install only a winxp.trying so that i receive bluescreen error.please give the solution
I'm already installed win vista for my compaq cq60-104tu laptop.now I install only a winxp.trying so that i receive bluescreen error.please give the solution
Hello
It would be better if you provide the exact error message, but you can try the following procedure:
Kind regards
Mohammed Mukram
-
HP Mini 200-4200 doesn´t give USB in the Start Menu
Hello!
I have: HP Mini 200-4200, pr B3R47EA #ABU nr. Hard drive died, received a new one and I've been waitng for the upcoming USB info. I just got my USB with the news of recovery on it in time. (Recovery USB key is - 685741-034)
I followed the instructions, but in the Start Menu of Options, he didn t give me an external drive. He gave me 3 options - hard drive for HP laptop, network adapter.
I didn t know what to do, and the thought I´d go out of the system and ask for advice here. Press Esc. He then continued in the Recovery Manager. So I thought, Whew!, it'll work. Now however, he got stuck for about 3 hours (he can´t think as long?) in the present:
"Recovery image factory preparations."
Did you receive any additional disk supplied with the system recovery media? If so, insert it now; otherwise, click on ignore.
Please wait. »
The USB stick has been inserted all this time. Now, after 3 h in the same screen, I got him out for a second and put it back, no change.
Current today?
(should I press the 'skip' button?)
SOS!
::::::::::::::::::::::::::
While waiting for a response, I stopped the mini and returned to the BIOS (no idea what I m done - but in some post, someone said they changed their boot order... went to look for that)
In the Conf system boot order appears like this: hard drive for laptop, USB floppy on say hard Key/Usb, CD-ROM Usb CD/dvd drive! USB floppy (with an exclamation point!) and network card. In the Boot Options startup disk has been disabled... I activated it. just in case... no idea what it means. After this USB doesn´t floppy have a "!" in this topic.
Should I change here something to conditioned USB option? The order?
I turned on my mini 3 times with the USB key in one of the 3 locations every time... it s do not know a good idea, but it's just doesn´t give me the option of Start Menu...?
Now with everything enabled in the boot order... doesn´t still come as an option.
:::::::::::::::
People also speak of traditional can´t find anywhere in the BIOS to change any setting?
::::::::::::::::
Oh and when I pop the USB in a location to another computer, it starts to read... but I m too ignorant and afraid to see that then happens, so I just took new.
Start by using the option for "floppy USB disk hard key/Usb. This should return you to the same place as before. If it is not, disable booting to USB floppy option and try again. Since you did not receive an "additional disk" with your USB recovery media (and even if you did, you could not use it unless you have a USB CD/DVD drive), you'll want to press 'SKIP' when prompted. Then, just follow the prompts as required and eventualy Windows will be installed.
Good luck and after back if you encounter other problems.
Please send Bravo
-
Hi, I have problems with my macbook air is closed. OS X El Capitan version 10.11.2. It gives the error message "safari is to interrupt the closing." It is after leaving safari severally. Can anyone help?
You can try force quiting safari: clicking apple (upper-left), and then selecting force quit, it should then open a window all open applications, choose Safari
-
External hard drive can not suddenly open - fixed
my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!
Hello muhammad.
Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.
What operating system do you use?
Have you tried running chkdsk on the drive?
Let us know.
Best regards
Matthew_Ha
-
Vista - Windows Update fails and defender gives the error code: 0 x 80080005
Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.
I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.
Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.
Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4. now to reset Windows Update by...
How to reset the Windows Update components?
[Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
http://support.Microsoft.com/kb/9710585. restart & test.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? »
Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? "I have restart after the installation of the program on Windows 7 for a Dell PC. The demo version has worked on this computer, but after buying the DVD, it doesn't. I tried all the switches compatibility under properties, but nothing works. Thanks for any help.
Hello SQUARKMAN,
I did a little research, trying to determine the compatibility with Windows 7. It doesn't seem to be compatible, since its last update compatible with Windows 2000/XP shows.
You could try running in compatibility mode, or if you have the XP mode, you can try to run in there also determine if you have better success.
Hope this helps
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I'm the only user on my computer and so I should have all the priveliges needed to install the update, but it still gives the error =)
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4. If the Office 2003 SP3 still fails to install, see...
Description of the update for Office 2003 (December 9, 2008)
[Download/install manually, if necessary & not already installed)
http://support.Microsoft.com/kb/949074You can not install a service pack for Office 2003
http://support.Microsoft.com/kb/884298~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
not able to connect a printer shared in task force gives the access error is to deny cannot coonect
not able to connect a printer shared in task force gives the access error is to deny cannot coonect
Hello
1. don't you make changes on the computer before this problem?
2. What is the brand and model of the printer?
3. What is the full and exact error message?
4. have you set a password to the shared printer?Please answer these questions and provide us with more information. This could help us help you better.
See the articles that may be useful.
"Access denied" error message when you print to a network printer, or view the properties of the printer
http://support.Microsoft.com/kb/307053
Cannot use network printer if your password is not saved
http://support.Microsoft.com/kb/312055 -
Hello
I received the following error message
"The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »
This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to. He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't. I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?
Thanks in advance
Hello
Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
1. Click Start, type regedit and press to enter.
2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
5 restart the computer for changes to take effect. Restarting the computer will create new keys.
NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
Visit this link for more information:
http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
Important: Incorrectly editing the registry can cause serious problems on the computer.
Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
Try the steps and check the result.
Kind regards
Syed
Answers from Microsoft supports the engineer. -
Windows email will not be printed and give this message "email error unexpected call to the method"
Windows email will not be printed and give this message "email error unexpected call to the method"
is there a solution for this?
Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method. Check my IE and it's IE8.
Problem solved!
Thanks for the replies.
Neal -
When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.
Problems with system restore:
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
1. If you use Norton (Etc), disable it before using System Restore. info at the link above.
2. try SR in safe mode:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
3 Malware will stop at the system restore:
If necessary, do all the workSafe Mode with network.
To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Satellite L500 - reversalof 'and @ keys '.
I recently bought a Satellite L500 laptop computer with a Vista operating system. When I use the keyboard when I press on the @ key types "and vica versa. It's a little embarrassing. Is there a reason for this or is it a fault with the computer. Conc
-
amclient... error XML damaged when installing BufferZone Pro
I install BufferZone Pro and get this message settings in file amclient.xml is corrupt BufferZone is trying to load the default settings. How can I solve this problem?
-
KB 2633880 update fails repeatedly
update fails repeatedly
-
Spintop Media Armhelper Activex Control1., which do I need?
This appeared on Secunias list and I don't know what it is for I need? I have XP SP3. Should I also have Media Player 5, 6 and 11?Advice please,.Thank youJanetno
-
My wifi suddenly device connects to the router
, but the thread. It was working fine yesterday and today. all of a sudden without link, connects. I tried to use the troubleshooter and it tries to connect, two other computers connect wirelessly, but this one will not. I connect it to an Ethernet c