Discovers the functionality/design pool review

Similar Questions

• I think that there is a bug in the function RT Set CPU pool assignments (SMP)

  I'm trying to configure Symmetric multi Processing on a PXI controller which has 2 CPUs.  I check the number of processors using RT get number of processors (it gives me 2).  I have a constant matrix of wire to the RT Set CPU pool allocations function and create an array of 2 elements with system and reserved as the two values (to assign a single processor for my timed loop and the other for "everything else").

  It works, which means it seems to do the assignment.  But if I look at the assignments of Pool Set CPU error line, it returns-2231, "invalid CPU pool settings. Each pool must contain at least 1 CPU. »

  I do not know what that means, or why I am getting the error (I might just "ignore it", but if the error is 'real', which is not supposed to do).  The entrance to the Pool Set CPU assignment is described in the documentation as "an array of enumerations, with an entry for each CPU.  For me, this means 2 entries, which is what I have.

  Does anyone have a rational explanation of what's going on?  Is this a bug?  The documentation is the problem?  I have attached the front (showing the number of processors and the error output) and the (very simple) block diagram.

  Bob Schor

  

  Thank you, Bobby.

  I reread carefully the Note help "Specifies the Set of processors available for automatic load balancing".  Now that I know the 'right answer', I can interpret what is written as planned, but it's not easy!

  It is also curious that, although the previous example has generated error-2231, if we deleted the error (or wired never error line), function has, in fact, affect the system and Timed Structures pool to CPU0 (I have a few 'real' testing code that shows CPU0 with Structures Timed cycles).  Given that the function "does the right thing" even if you specify parameters of 'bad', perhaps it should be treated as a warning, not an error (or otherwise make a mistake of 'real' not assigned to a pool - it also wouldn't hurt to have a less obscure the Error Message, or more explicit "be sure to have at least a CPU explicitly assigned to each system and Timed Structures pools") , maybe in "BOLD".

  This code has no error:

  

  Hereby I give you credit for the 'Solution', but I'll mark my answer as the Solution because it has a photo to help readers who are intrigued by the question and our responses.

• I bought hp dv6-6121tx laptop computer. The function keys f1, f2 etc; are designed to run only along

  The function keys f1, f2 are designed to work only with the fn key.  But, normally, we use the function keys f1, f2 etc. more often than the adjustment of brightness, volume control etc.; / I would like to change the key option based.  Is this possible.  In other words, I should be able use the function keys f1, f2 etc. without pressing the fn key?

  Help, please

  concerning

  RAVIKUMAR

  Hello

  Check in your bios menu to see if you have the option described in the link below.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Is there a limit for research on the function of advanced search for files containing text matching. My search always ends with 500 discoveries but the folder contains several PDF files that match the criteria.

  Hello

  Is there a limit for research on the function of advanced search for files containing a text match? My search always ends with 500 discoveries but the folder contains several PDF files that match the criteria.

  Hi carls76936091,

  Open Acrobat, go to the Edit-> Preferences-> search & check if there is a limit to 500 set, in case if it is to increase it please.

  Kind regards
  Nicos

• I have the following error on my phone design-MuseJSAssert: error calling the function switch: Error: Invalid argument

  I tried to insert the third party html code 'a noaa weather map' in the design of my phone yesterday. It did not work well. So I deleted this return. Afterwords, I get the following:

  (Message on the Web page "MuseJSAssert: error by calling the function selection: error: invalid argument.")

  I already have all the design is complete and ready to publish. The desktop version works fine. But the design of the phone does not work. For the most part, I noticed that the menu master accordion does not work now.

  Help! I really want to redo the whole phone design. Thanks, H

  I have already found and corrected the error. Apparently, when you bind a phone

  Number of muse, he is not obliged to put a colon: in the figures. I have

  have removed the colon and handed over running the program and the error is cleared

  upward. A clear tutorial on the 'phone links' would be useful.

  Thank you. H

• How to add the warning message when you use the function 'print' in Adobe LiveCycle Designer

  I'm trying to make the pdf document for my business that requires the addition of a warning message while everyone to use the function 'print' page...

  Does anyone know how to add the warning message about LiveCycle Designer

  Also my supervisor mentioned something using "nag" If that sounds at all

  Not in the XML code, in the case of script of pre-publication of the "print" key. If you don't have the script editor to the top on your version of designer, you can press ctrl + shift + F5 to bring it.

• What design pattern - the functionality of language change

  On my request, I will have a series of buttons to choose a language. When the user selects a language, all control labels, pop-up messages and other turns in the chosen language.
  
  I would like to do from a standpoint of OOP and use design patterns. That we recommend to use?
  
  My guess is the policy template. Am I wrong?
  
  Thanks for any comment or the link.

  The policy template is used to exchange algorithms dynamically. Based on user input, that a decision can be made to perform one or more functions (game of). This behavior is encapsulated in separate objects.

  You just want to Exchange data during execution. Or maybe set some behaviours about specific functions in languages like the currencies in the way which are managed, and the other measures. The latter would be applied as a reason for the shell.

  When it is simply data need changed/loaded during execution, it instead of a change to the model in the MVC design pattern, using an observer to notify all registered "headphones" and using a command to get the thing going.

• How to re - activate the functions 'Restore previous Session', "Recently closed tabs" and "Recently closed Windows" in the menu of history?

  For some time, four choices in the restore section (tabs of other devices, Previous Session Restore recently closed tabs and recently closed Windows) have been shaded. Keyboard shortcuts do not work, and didn't undo closed tab in the context menu of the tab.

  I found and tried various patches to do this, including:

  • From Firefox in Mode safe without addons.
  • Firefox reset.
  • Change the values of browser.sessionstore.max_tabs_undo and browser.sessionstore.max_windows_undo in all: config.
  • Check to see if I have a user.js in profile Firefox. (I don't).
  • Verify that the private browsing is not the default mode. (It is not).
  • Create a profile to see if it had the same problem. (He did.)
  • Running anti-malware analysis. (BitDefender and SpyBot).
  • Temporarily disable my anti-virus and anti-malware.

  Any of these solve my problems.

  Other devices tab is grayed out, but I've never used, and it might have previously grayed out.

  The story works in general. Sites I visit are added to the log.

  Preferences are saved correctly when I change them.

  Any advice on how to solve the problem would be much appreciated, as I am very fond of these features and often served until they stopped working.

  ADDITIVE

  After that looking through the list of preferences of change created by the resolution of the problems, I tried now also reset the following text:

  • browser.places.smartBookmarksVersion
  • browser.newtabpage.storageVersion
  • Browser.cache.Disk.Capacity
  • Browser.cache.Disk.smart_size.first_run
  • Browser.cache.Disk.smart_size.use_old_max
  • Browser.cache.Disk.smart_size_cached_value

  The problem persists.

  I finally managed to understand this. In searching the Web, I found a thread detailing a similar problem on the Mozillazine forum. The problem has been identified as a missing browser.sessionstore.enabled set, so I went looking in Subject: config and couldn't find it. After creating the entry, by assigning the value true and restart Firefox, the functions of recovery/recently started working again. Apparently, some bookmark plugins and session-based can cause this problem, but in my case, it must have been something else, that I never had no such plug-ins installed.

  If you have this problem, here's a detailed itinerary of the way I fixed it. Whereas there seems to be several problems that can cause restore/recently functions to stop working, it is not a guaranteed fix, but it is still a thing to try, at least.

  1. Open a new tab or window.
  2. Type of topic: config address in the box and press ENTER.
  3. Read reviews and promise to be careful.
  4. Copy this: browser.sessionstore.enabled - and paste in Subject: config'search box in s. press ENTER.
  5. If you copied the text at the top right, the setting should appear in the list. If it is not the case, you have the same problem, I did. (I would say that you copy/paste the text indicated and only this text before moving on to double check).
  6. If the parameter does not exist, right click on the parameters of the list and choose new-> Boolean. Paste the parameter name that you copied previously in the name box, click OK and then set the Boolean true. Once you have click OK, restart Firefox, and (hopefully) things should work properly again.

  Thanks to everyone who offered help and thoughts!

• Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  Due to browser problems

  Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  My data (mp3, photos, documents, etc.) will not be affected?  I also have Windows for Mac.  It will not be affected?  Recent browser performance is untenable in weeks.  Safari 5.0.6.  Now even my Firefox is fact-zo.  Process seems simple enough, but thought I would ask a preview as many reviews on here seem to go anyway in regard to recommend it.  Thought that I have gathered a few comments before the trigger (or not) thank you to all those wh

  Just to start with this one:

  I also have Windows for Mac.

  I assume you mean that you run Windows in a virtual machine such as Parallels? If so, the machine virtual peut must be updated.

  When you install Snow Leopard, make sure to choose the option to do a custom install, so you can select the check box for Rosetta, or it will not install and PowerPC applications will not run. Not a huge deal if you miss. The first time you try to run a PPC application if Rosetta has not been installed, OS X offers to download and install it for you.

  Firefox works under Snow Leopard, which is the oldest version of OS X Mozilla always supports. Safari installed with SL will remain grossly outdated and should not be used.

  Nothing will happen to your documents, although I can't say with certainty that all the apps from third party that allows you to open will not be updated. They can. They cannot. For example, Office 2004 will run as long as Rosetta is installed.

• What is the function of the keys filter & stick in PC

  Original title: keys to filter/Stick

  What is the function of the keys filter & stick into the PC. What is functions of these keys.

  Hello

  FilterKeys is a keyboard feature that instructs the keyboard to ignore brief or repeated keystrokes. Using FilterKeys, you can also slow down the speed at which a key repeats when you hold.

  For more information visit:

  To turn on FilterKeys

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/access_filterkeys_turnon.mspx?mfr=true

  StickyKeys is designed for people who have difficulties to maintain two or more keys simultaneously. When a shortcut requires a key combination, such as CTRL + P, StickyKeys you press a key amending (CTRL, ALT, or SHIFT), or the Windows logo key () and keep it active until the other touches.

  For more information visit:

  To change StickyKeys options

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/access_stickykeys_settings.mspx?mfr=true

• To an existing dashboard, how can I go back and discovers the source of data for the items in the dashboard? More precisely to determine why the data not displaying on the dashboard for a host where the agents seem to work fine.

  Here are the servers in the cluster.  The active cluster in the attached image is PrdERx2.  The zeros should have a count associated with them equal to zero.

  Thank you

  Barry

  Hi Barry -.

  If the dashboard in question was created with WCF (our Framework Web component that is included with the product), then using the tab design inspecting dashboard design suggested Bart is a good. WCF dashboard get much of their data by querying the Foglight data model so once you are in the editor of WCF, change views to queries drop-down list and see what queries can exist in this module WCF. Test if you find to make sure they return data. Also change the functions drop-down list and see if you can test as well.

  I hope this helps.

  Robert

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• Opening. ORF of in LR with the function "change in"...

  After reviewing a similar position on the issue and to try the solution I'm looking for help. The original message has been identified as "how to open the files. ' ORF in Camera Raw 9.6.1 for PS CC 2015.5.1.

  Was just search the Olympus TG-4 similar question and follow your suggestion but no change. If I is PS CC and select one. ORF drop directly from its source location, Camera Raw 9.6.1 opens fine but inside LR and selecting "change in"-Camera Raw does not open the file, the file opens in a regular window of PS.

  Any suggestions?

  BTW... initially no later than a few days ago the function "change in" LR opened the. ORF in Camera Raw files very well...

  Thanks in advance...

  Bob

  Thank you and a sense. Puzzling part was why he was initially differently and all the. ORF files opened in the Rawwindow of camera using the same selections.

  Just looked at the link to the discussion and it all makes sense now because my system seems complete updates and its possible versions were initially do not match, until all downloads are complete. Thanks a lot for the answers...

  See you soon

• calling the function of query of VO from bnd variables as parameters

  Hi all

  I Package SQL pack1 with 2 functions (par1, par2) funct1 return funct2 (par1, par2) R2 return R1.

  I have VO, vo1 query

  Select pack1.funct1 (bind1, bind2) as attr1,

  (bind3, bind4) funct2 as attr2 value

  See criteria VC1, like af:query. application of vo1 results as table results

  When the search button is touched

  get the error

  java.sql.SQLException: parameter IN or OUT to missing index: 1.

  Is this way of the function call?

  Thank you

  -shiva

  This indicates that DB schema on which the application is connected at run time does not recognize the

  Pack1. "" funct2.

  To verify your actual DB plan (which application uses running - may differ from the design schema time!) to see if there is pack1.funct2

• The app designer works in PeopleCode

  Does anyone know how to run application in PeopleCode designer features?

  I understand that it is a little far fetched, but what I think is to be able to run 'Compare the reports' and "Project copy to the file" using the PeopleCode.

  I was wondering if there are all the functions/executables on the server of an app/process Planner (UNX/RTC) that we can use to get something like that?

  Hi Alex,

  Not sure if that's really what you're looking for, but you can run pside via the exec command in peoplecode. The command line switch - PJTF allows you to copy a project to a file and there are a number of switches used in the command compare. They are described here - Comparing definitions to upgrade using the command line , I don't know if you can create a project and add objects via the command line, but you can certainly do so through SQL.

  There are also features to copy and projects compare online as part of peopletools--> tools lifecycle--> migrate data--> data migration workbench. I'm not familiar with it, but at a glance through the code pane shows that it works an app, PTADSAEPRCS engine - that uses the PROJECT app package %metadata:ProjectDefn:ProjectDefn_Manager() to make the copy and compare. Maybe you'll get what you want?

  Paul