Discovery of the network to users.

Similar Questions

• Discovery of the network shuts down in Windows 7

  I tried to get my new laptop with an upgrade to Windows 7 (from Vista) networking with your XP desktop.  A question I am having is that when I go into the advanced settings, network discovery is always off, even after I changed to the and have saved the changes.  I did this several times and I have my location set to the home network.  Any ideas why network discovery maintains itself OFF reset?  I wonder if this is why the XP machine cannot be mapped in the network.

  Thanks for any help.
  Trini

  Hi PATangoS,

   

  Step 1: Check if the associated network services are running
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click on 'function Discovery Provider Host', change the startup type to automatic and start the service.
  c. apply the changes.
  d. restart the computer and check if the problem persists.

   

  For more information, see network discovery will not remain

  Hi Mateek,

   

  1. have you installed several security software on the computer?
  2. don't you make changes before the show?

   

  Step 1: Add permissions to the registry

  a. Click Start, type regedit and press to enter.

  b. look for the following registry:

  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet

  c. right click on Services, click Permissions.

  d. Select the user name and the box "total control".

  e. click ok to apply the changes.

  f. restart the computer and check if the service starts successfully.

   

  Very important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
  See Registry backup

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automating discovery of the network in Windows 7

  Hello

  I use Windows 7 Ultimate. The problem is when I go to network it keep ask me ' network discovery and file sharing is disabled. " Click here to change. " 

  It is so annoying to always click on that and select Public or private profile.

  I put the SSDP Discovery service to start automatically, but it is not affected Network Discovery Service.

  It is in the firewall exceptions.

  How to set or configure the network discovery so it starts automatically when the PC starts every time?

  Also

  I want to stop computer remotely.

  When he does it disables the network discovery because of Security Issues (Sounds like IP-Sec or something totally unaware of it). I want to turn it off or want to add Exception since it is linked only in the private network.

  Add Exception or lower security on off the computer remotely?

  Hello Chetan,

  I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

  To provide the proper resolution, that I would need more information on your side.

  1. What is the brand and model of the computer?

  2. have you made changes on the computer recently?

  3. What is the security software installed on the computer?

  4. What is the error message you get when you try to activate the option of network discovery?

  5. have logged as administrator?

  Method 1:

  Make sure that the following services are enabled on the computer.

  (a) click Start, type ""services.msc ' in the search and click on services. " Verify that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery
  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) click on each of the services listed above and click Properties.

  (c) click on the general tab, and then, next to Startup type, select Automatic.

  (d) click applyand then click Start.

  Method 2:

  If the problem persists, I suggest you follow the steps in this article.

  Enable or disable network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  To stop the remote computer, please follow the steps below:

  1. open the command prompt.

  2 'Net view' type and a list of computers should appear.

  3choose a target computer and don't forget not the name of the computer

  4type "stop m \ComputerName" " " ".

  (Type the letter attributed to what you want to do (see Tips)

  ( ComputerName is probably where you should put the name of the computer.)

  5your target computer will now disable.

  Tips:

  • f = forces any running application to close (if they have saved his job or not)
  • r = restart the computer
  • s = a normal closed

  Hope this information is useful. Please post incase you have any other questions, I'll be happy to help you.

  Thank you.

• Corruption, massive in almost all of the network services user account and firewall Windows

  Win 7 Pro SP 1. An account with administrator privileges. Domestic wireless access to a router; D-link devices. System was working fine until about seven 2 (and I pointed out some Windows updates installed September 1, but don't think it's relevant). Computer users allege no unusual behavior on their part Analyses of viruses from Windows Defender and Avast free were clear. Restoring from a previous restore point (two different ones) has not solved the problem - the restore points were date known system OK. Corruption has been maintained despite the restorations (worked and failed).

  A complaint that has lost network access. On the survey, found that all these symptoms mentioned below, and no doubt other symptoms exist that I am not aware of. The solution was to create a new user account, and which restored massive configuration problems.

  Symptoms:

  1 Windows Firewall could not turn on. Yes, I looked at the KBs regarding this issue (basic dependencies does not and so on) and tried individual hotfixes from the KB, without success.

  2. in the network sharing Center, there was no display of the usual icons at the top of this window. Those who show the personal computer connected to the router connected to the internet. Error message displayed re no dependence of base.

  3. it is possible to send signals between the USB wireless device on the computer and the wireless router. In the task area, the Windows message was 'limited connectivity', something like that. It was possible to connect and disconnect using this facility. But no internet access, notes.

  4. the resolution of the problems would not be executed. The message was that political diagnostics are not running. All attempts to start this service (with its two assistance services) has failed. Tried the individual patches of the relevant KB (wearing mostly on change permissions in the registry at some points), which failed.

  5. in addition, the Dhcp client service would not be executed. Once again, among the KBs tried the proposed fix on the permissions change, which failed. (Omitted in the sense that I could not always start the service; editing the registry was fine).

  5. firewall KB contained a file "beats" that you can create and run, I did, and another had similar commands (start and stop some services) that could be run in a command window. Both failed on some services - especially Mspsvc (Microsoft protection Service) - Although the success was shown to other services.

  6. when I created a new user profile, I re-entered the registry permissions in some of these places just to see what was different. In the damaged user profile, what was missing, it was the standard system of services (about 3 or 4 of them; things like the name of Dhcp). What showed was the News user account (for the specific user account; administrator; and two more points).

  Telling me that something has released a complete subsystem or three. Never seen this behaviour before.

  Would be nice to have an idea where to look for a fix / restore procedure.

  DonM

  Hello

  Thank you for providing us with brief information on the specific issue that you are facing the computer.

  I would like to know, have you been able to access the network on the new user profile?

  As you have tried several steps including the change of permission for the registry value and run the batch file, I would ask to perform Scan SFC.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  For more information on how to scan SFC, please see the Microsoft Support Article below.

  Use the System File Checker tool to repair missing or corrupted system files

  Let us know the results of the SFC Scan, so that we can help you further.

• No discovery of the network when used in bridge (NAT) network?

  After allowing the network discovery in my guest (Windows Server 2008 R2) I can see the name of the client and the host machine in the node of the Windows Explorer 'network '. But I don't see any physical computer connected to the network.

  It is a peculiarity of the bridged networking? It is possible to discover all my other machines without having to go to NAT to any other type of network?

  Dear WhiteKnight

  I must say that we are dangerous, given our Avatar

  OK what I realized, is that when we use the network address translation, we are between our internal and external IP
  So basically, we create the router or switch with transmission of the tables that would be the internal network packets routing to the outside and vice versa.

  Bridged longer connect our network to an uplink or a switch, here, in our scenario, it would be ports VM bridge to our ports on vSwitch and then they replicate that they are connected in a physical way.

• I am unable to stream music to Xbox because the network discovery is disabled.

  Hello.

  We just got a new Xbox and I want to listen to my music to it.  Before asking that my Os is Vista Home Basic 64-bit SP 2 with all the updated.

  Antivirus is Microsoft Security Essentials

  Firewall is Windows Firewall - on, but default settings open the port for the client to the transmission

  The problem seems to be that the computer browser service does not start

  It is configured to start automatically.  Regstry settings show that this is supposed to start.  (MaintainServerList Yes)

  Server, Workstation, and RPC can also be programmed to automatically start.  They do not start.

  I would try to start it in safe mode, but the server does not start in safe mode. For the computer browser does not either.

  When I try to start the discovery of the network, I click Yes and it confirms that I am an administrator.  Refreshes the window and he came off.

  The strange thing is that if I look at the map of the network, I can see the Xbox and our laptop.  But in network, it asks me to turn on network discovery and file sharing.

  I tried to start the service with

  net start "computer browser".

  It was not an error.

  I really don't know what else to try.

  sfc/scannow

  found errors and fixed them.

  Original title: impossible to listen to the music to Xbox because that network discovery is disabled because the computer browser Service does not start

  Hi Ryan,

  Thanks for keeping us posted and share this information with us.

  I would like you to contact XBOX support for help. Your question would be more out there.

  Check out the link-

  http://support.Xbox.com/en-us/

  You can also post your request in the Xbox Forums as well.

  Check out the link-

  http://forums.Xbox.com/xbox_forums/b/default.aspx

  Get back to us if you have other Windows-related issues. We will be happy to help you.

  Thank you.

• Cannot depend on the network discovery and streaming media

  I use Win7 Pro., SP1.

  Some time ago, the I realized that I can not use home network more. I can't turn on my discovery of home network and streaming media. The network discivery always returns OFF.

  The following services are all on (automatic): support TCP/IP NetBios and DNS Client, Function Discovery Resource Publication, SSDP Discovery.

  Please notify.

  Hello Dudi,

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing because of the discovery of the network and streaming media problems. I'm going to

  certainly will help.

  Network discovery is a network setting that determines if your computer can find other computers and devices on the network and whether other computers on the network can find your computer.

  This problem can occur because of incorrect network discovery and streaming media settings.

  For network discovery, I suggest you use the steps in this article and check if it helps.
  Reference:
  You can't turn on the discovery of network and Sharing Center in Windows Server 2008, Windows Server 2008 R2 or Windows Server 2012
  https://support.Microsoft.com/en-us/KB/2722035
  (Also valid for Windows 7)

  For media streaming, refer to the suggestions of gifted xI replied on 24 December 2010 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-turn-on-media-streaming-another-Windows-7/b765ec7a-8c7a-4147-8645-fedc3a5fc991

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• two computers on a network (wireless) but three show upward in the network folder

  I have a Dell Inspiron under Vista x 64 (server) and a Dell Vostro, computer laptop, running on Vista x 86 (client) and a printer (USB Server) network associated with a Cisco WRT400N... everything works fine. However, in the network folder, on computer, I get an icon for a third computer. When it is explored it looks exactly like my server... but it has its own unique name... and I have only the above two networked computers. I worked with a Cisco service representative yesterday to ensure that all goes well with my router. I don't know I've caused this... now... can someone tell me how to UN-cause it?

  Hi runslong,

  It is possible that computers on the same network can be duplicate themselves.

  I suggest that you disable the discovery of the network on the computer and later get back, check if it works.

  To turn off network discovery
  a. open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  b. click turn off network discovery, and then click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Enable or disable network discovery
  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  If the previous step fails, then I suggest that you unplug all the devices connected to the network and then reconfigure the new network, check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mystery phone appearing in the network

  

  For some time, I had this mystery phone appears on the network. The appliance changes almost every time that I look at. It can be any phone and any name. I don't have a smart phone, nor anyone who connects to this network. I'm quite positive that sees no other computer this device. It does not appear in newspapers DHCP on the router. I tried to change the workgroup names. I turned off absolutely all devices on my network, including my PC for a few minutes and then restarted. I have scanned for viruses. What's left to do?

  Phones can not actually be connected to your network. I recently saw the same thing on my control panel network and thought that someone was using my internet. However, it turns out that, by default, windows shows you all the devices nearby, regardless of the question of whether or not they are connected to your network.

  You can disable it by going to control panel-> network and Internet-> Network and Sharing Center-> advanced sharing settings, and by activating the option that says "disable discovery of the network.

• Users on the network can not connect

  I have a problem with the network connection, and would be grateful if someone could tell what to check next.

  Try to connect from an iMac under Snow Leopard, just sign in dialog box stirs whenever I try to open a session.

  The customer log shows the following after each attempt

  SecurityAgent [548] display of the Login window

  kernel WARNING: space low (5 < % free) on the audit system of audit log files

  SecurityAgent [548] failed to obtain registration of the user to 'test' for Directory Services

  SecurityAgent [548] user info context values defined for test

  Unknown user (test) SecurityAgent [548] login attempt success for the audit

  kernel WARNING: space low (5 < % free) on the audit system of audit log files

  On the server (running the Server 3.2.2 and Mavericks) he has no message in the newspaper during the connection attempt.

  DNS seems to work without problems. On the control server of the

  Home 192.168.3.100

  Returns the correct host name and

  host [hostname]

  Returns the same ip address.

  Using nslookup to the iMac gives the same results

  The iMac seems to be properly related to the server. Connection options indicates the correct server with a green lamp beside her name and the list of user login has one entry of 'other '.

  The network is wired.

  Verify that the user 'test' exists and that it is the correct type 'network' on the server. Verify that the customer is using the server for authentication. Your the client disk is full, or almost, remedy before proceeding. OS X, like any unix, really don't like do not have the space available on the file system, and this may be the cause of the problem.

  C.

• What is Akamai NetSession customer (users\**\appdata\local\akamai\netsession_win.exe and it's OK to grant access to the network?)

  My mobile provider sent a notice to update my BIOS software, I did.  During automatic reboot, I got a security alert Windows, informing them that Windows Firewall has blocked some features of Akamai NetSession Client on public and provate networks... Allow client to communicate over public and private networks Akamai NetSessin?

  Akamai don't come right out and say, but the reason that netsession is installed on your computer is to allow them to use your computer to 'upstream' content to other users.  By installing NetSession, you allow Akamai use your idle bandwidth to transfer files to other users of Akamai.

  Some of the statements of Detangling: http://www.akamai.com/html/solutions/client_design_principles.html

  "The information that Akamai capture are similar to a web server, and that the information is only used for troubleshooting and monitoring of network performance."  This means that NetSession sends continuously information on your computer to Akamai.

  They say that NetSession will use your computer when it is "inactive or use minimum network resources.".  This means that NetSession is constantly monitor your use of the network and transmit this information to Akamai.  And as bandwidth varies from second to second, this info should be sent upwards to Akamai a lot.  Wait a minute, didn't they say just they captured only the kind of info that capture web servers?  Web servers capture information about the use of bandwidth.  What other information Akamai capture?  I couldn't find details on their site.

  So if you install NetSession, you be to join a peer-to-peer network and allowing Akamai send files from your computer at the time as Akamai may use you your minimum bandwidth.

  I also have a problem of security on the files I get the NetSession.  It seems that it is not difficult to download a file using NetSession, change it to carry a load of viruses and then leave the computer idle and wait NetSession transmit the file infected others NetSession.  I hope that Akamai has taken measures to address this problem, but I can't find any information on it.

• Keep the network discovery settings after you restart the Server R2 Standard 2012

  Hi all

  I'm having the following problem. After you restart the server from the network discovery will go off. Therefore, I do not see the server, this can cause problems in the future, so I need to know how to keep on even after network discovery settings server restart.

  Thanks for the help!

  Hi, manual,.

  I suggest you post your query in the following forums to improve assistance in this regard.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Thank you.

• Access to the files of the network by which the user

  Hi all

  I have win 2003 Server Active directory and win 2008 Server files. And this win 2008 Server system folder shared on the network. I have 10 reviews with all permissions on these files. But a certain keep to delete certain files and folders. How the leaflet which the user made this thing. kindly help me on this.

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  Dear Sir

  Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  I am in a field & I'll migrate with a domain name.

  EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.

  data servers are also migrating with the new domain.

  is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.

  Kind regards

  Chauvet J.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/