Discovery of the network shuts down in Windows 7

Similar Questions

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  Hello jsitch, This thread has been created in the forum Desktop and personalization; the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

• every time that the computer shuts down, (IE Automatic updates), recent documents is empty.

  original title: recent documents: every time that the computer shuts down, (IE Automatic updates), recent documents is empty. How do I prevent this? Very frustrated Ruth

  Recent documents: every time that the computer shuts down, (IE Automatic updates or I turn off during the night) recent documents is empty. How do I prevent this? Don't know if the following has nothing to do with it, but - about 6 months ago I reinstalled XP, since then I have no sound and comes to the foregoing. Oh and to add, at the same time, I've changed hard drives up and down, which means that I have and that he had 2 hard drives.

  Very frustrated Ruth

  Hello

  Try the steps below to solve the problem.

  Caution:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  (a) open the registry editor and navigate to:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer-advanced

  (b) save the key in a file. See the article of support upward.

  (c) the value of Start_ShowRecentDocs as a result.

  (d) value of 0 - list of my documents most recently opened is disabled
  Value 2 - list my most recently open documents is enabled

  Note: set the value to 2.

• error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

  sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

  Hello

  • What is the full error message?
  • What were the changes made to nfore this question?
  • What exactly do you mean by "no authority running avg or malwar bytes?
  It's a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

  I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

  (1) download the driver on the internet instead of the installation CD.

  2) with the help of msconfig with selective startup and disabled all programs except Microsoft.

  (3) creates the new administrator account and returned through it all.

  (4) turned off firewall and anti-virus

  The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
  Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

  Let us try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Are there problems with Microsoft 7 and Frontpage 2002? The system shuts down when I try to add a hyperlink.

  The system shuts down when I try to add a hyperlink.  The hyperlink insertion page opens.  But when I try to click on the link that reads "Microsoft Frontpage has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  Edited to add: if I type in the hyperlink, it seems to work.  But in the past, I just clicked it.  But now when I click on it is when she stops.  Strange.  Did not this on the Vista computer.

  Hello CaptainKAG,

  Thanks for posting on the Microsoft answers Forum.

  I recommend you post in the Forum Office where this problem is related to FrontPage 2002. We can install on Windows 7, but is not fully compatible, so some features may not work properly. Office 2003 and Office 2007 are fully compatible with Windows 7.

  Click here to post in the Forum Office.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5

• Discovery of the network to users.

  Hello! It's me again. Read all the documentation, but have not found the answer. Problem with the discovery of the network with users.

  I created:

  1. policy - network discovery - network - here I added networks, area and actions (see the user host application)

  2. policy - network discovery - users - here to add all protocols

  Created:

  3. policy - access - rules (only default discovery use) control

  How I understand for the first time that all the. But the system cannot find the users (is to find only the users that use the FTP)

  Maybe it's need to use NetFlow devices? What I am doing wrong? Thank you!

  Hello

  Network discovery discover hosts and applications, but this cannot be used in the strategy of access control for the rules of the user in function.

  The primary use of the network discovery is for IPS recommendation firesight political and awareness on user data in firesifght.

  For access control strategies, power of fire must have mapping user ip based on which it can apply the rules.

  You need user agent, who can get the IP of the user mapping, and then this whole config on the firepower that will work parallel to that.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...

  http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...

  The items above will help.

  Rate if helps.

  Yogesh

• an error message appears indicating the pc has a problem and the computer shuts down

  an error message appears saying the pc has a problem and the computer shuts down.

  What do you do when this happens?  It is the way in which computers to protect the components of your computer.

• What happens if the network goes down when the broker DataGurad (with fast failover) is configured?

  Hello Experts,

  We have configured Dataguard in our environment, now anxious as the broker. But we have some queries.

  1. what happens if primary fails (failover or passage)?

  2-if failover occurs, go back manually when the primary is available?

  3-if Eve falls down, how would react broker?

  4 - If the network goes down (for any reason) for some time, observer cant find primary and standby, how would he react then?

  Please help me with your advice.

  Thank you and best regards,

  Vignacourt zerwali.

  Hi David,

  Let me put in a way if I understand your question. So, you have broker + observer configured in your environment. FSFO occurred which means your watch becomes primary and is running. Then after some main real-time is alive and what will be the observer will do here. ? right. ?,...

  If my interpretation is correct, here is the answer,

  (i) when the old primary remains alive, just bring up the State. The observer resets automatically (if its market) the database, bounce the old primary and synchronize with the new primary (i.e. your old database pending). But remember that your old primary will undergo sleep role yet...

  After the process described above,

  (II) If you want that your old primary again, we have to do a manual failover to get your old configuration.

  Hope he would have deleted you. !!

  Kind regards

  Pradeep. V

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• Automating discovery of the network in Windows 7

  Hello

  I use Windows 7 Ultimate. The problem is when I go to network it keep ask me ' network discovery and file sharing is disabled. " Click here to change. " 

  It is so annoying to always click on that and select Public or private profile.

  I put the SSDP Discovery service to start automatically, but it is not affected Network Discovery Service.

  It is in the firewall exceptions.

  How to set or configure the network discovery so it starts automatically when the PC starts every time?

  Also

  I want to stop computer remotely.

  When he does it disables the network discovery because of Security Issues (Sounds like IP-Sec or something totally unaware of it). I want to turn it off or want to add Exception since it is linked only in the private network.

  Add Exception or lower security on off the computer remotely?

  Hello Chetan,

  I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

  To provide the proper resolution, that I would need more information on your side.

  1. What is the brand and model of the computer?

  2. have you made changes on the computer recently?

  3. What is the security software installed on the computer?

  4. What is the error message you get when you try to activate the option of network discovery?

  5. have logged as administrator?

  Method 1:

  Make sure that the following services are enabled on the computer.

  (a) click Start, type ""services.msc ' in the search and click on services. " Verify that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery
  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) click on each of the services listed above and click Properties.

  (c) click on the general tab, and then, next to Startup type, select Automatic.

  (d) click applyand then click Start.

  Method 2:

  If the problem persists, I suggest you follow the steps in this article.

  Enable or disable network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  To stop the remote computer, please follow the steps below:

  1. open the command prompt.

  2 'Net view' type and a list of computers should appear.

  3choose a target computer and don't forget not the name of the computer

  4type "stop m \ComputerName" " " ".

  (Type the letter attributed to what you want to do (see Tips)

  ( ComputerName is probably where you should put the name of the computer.)

  5your target computer will now disable.

  Tips:

  • f = forces any running application to close (if they have saved his job or not)
  • r = restart the computer
  • s = a normal closed

  Hope this information is useful. Please post incase you have any other questions, I'll be happy to help you.

  Thank you.

• What is the best way to shut down your Windows 7 computer?

  My computer is not properly shut down and a light remains on constantly. How to make sure that the computer is totally off.
  Thank you.
  Joe

  Joe,

  Here are some links to 'read up': http://windows.microsoft.com/en-us/windows/turning-off-computer-properly#1TC=windows-7
  and: http://windows.microsoft.com/en-us/windows/change-create-delete-power-plan-scheme#1TC=windows-7
  and: http://www.sevenforums.com/tutorials/778-power-plan-settings-change.html
  and: http://windows.microsoft.com/en-us/windows7/products/features/power-management

• Installation of updates and the computer shuts down

  By turning on the computer it goes to 3 of 3 updates to the installation, then stops. This happens several times and am unable to turn on the computer. I brought the laptop with Vista already installed on it, not so no disc
  I am out of resources on how to solve the problem!

  Hello Barby,

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe . When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error. This error may have several causes. Among them are the following:

  • Incompatible system files have been installed.
  • A Service Pack installation has failed.
  • A backup program used to restore a hard drive does not correctly restore files that may have been in use.
  • An incompatible third-party program has been installed.

  Step 1:
  You can try the above troubleshooting steps I have provided about the "configuration updates 3/3. 0% complete".

  Step 2:
  Please follow the troubleshooting steps mentioned in the link below
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;156669

  Step 3:
  Otherwise, please try the steps below to restore your computer to the last working state.

  (1) start the system using a Windows Vista DVD.
  (2) system will ask you to «Press any key to boot with the CD or DVD...»
  3) press enter or another button to continue...
  (4) "thewindow installation" will open. Click Next.
  (5) choose the option "repair your computer" in the next window.
  (6)the system recovery options window"opens. Choose the Option 'System Restore'.
  (7) now select 'System Restore' window you invite, and then click Next.
  (8) he will ask the 'restore to choose Point".
  9) click in front of the box 'Show Restore Points more than 5 days'.
  (10) select the date on which Office worked very well. And then click Next.
  (11) 'drive to confirm to the recover window"will ask you choose Drive where the OS (Operating System) is installed." Click Next.
  (12) confirm your Restore Point window will be fast, click Finish.
  (13) A pop up you will be asked to continue the restoration of Windows. Click Yes.
  (14) the system will begin to restore the operating system for the selected restore point. Once finished with this the system will ask you restart indicating that the machine is restored successfully.
  (15) reboot the machine.

  By performing the steps mentioned above, system will be re-recorded on the date on which it was working fine.

  Note

  : S ' ensure that to disable your automatic update function after the restart, to avoid to automatically download patches.

  [If this post can help solve your problem, click "propose as answer" below or the "Vote as helpful" button at the top of this message.] This way you can help others find the successful resolutions of questions].

  ---