disk access error internal and SD T5 after bad disconnection from PC

Similar Questions

• I can receive, but not send. Error (0 x 80004003) occurred after sending photos from Picasa.

  I get the following error in WLM: 0 x 80004003 while trying to send messages.  I can receive, but not send.  Error occurred after sending photos from Picasa.

  Delete the emails in your Outbox and close Windows Live Mail. Open Windows Live Mail and send a test message to yourself. Is the problem solved?

• No Internet access. error 1747. and the dependency service or group could not start

  Have a laptop dell inspiron 1545 with vista (build 6002: service pack 2).  Have a wireless network at home.  laptop stopped connecting to the network 2 weeks ago.  When I try, I get a message "dependency service or group was able to start.  When I go to manage networks, there is no detected networks.  Cable internet access also does not work with this laptop. cards (minimap dell 1397 Wireless) wireless and ethernet say thet controller work correctly.  2 other laptops in the House are normally working on the network.  Reviewing service autoconfiguration WLAN and Wired AutoConfig and when I try to start the two ths get message... "Error 1747 the Authentication Service is unknown".  Another little thing, I noted... isatap.home don't works do not-message says to download the drivers- but not on net so cant)... don't know if this is related.

  can you help me?  Thank you, Aodhanm.

  I just wanted to post that I used the

  netsh winsock reset

  command to fix this same error 1747 known when you try to manually start the WLAN
  on a Windows 7 Pro computer.

  After a restart it worked fine.

  Chuck
  NerdForce.com tech

• Disk access error removable CD player... "Z:\ is not accessible. Access denied»

  Hello! I had a big problem I got a message saying thay one can access my removable disk or my CD .i don't know why? /

  I turned off "use simple file sharing". No change.
  I chose to restore my system, and I can't do it.
  When I try to log on in safe mode fine.
  I have used many CDs.
  in a second computer, I can access them.

  Hi yassinksouri,

  As the problem does not persist when performing the clean boot procedure, which means that some third-party programs installed on the computer are causing the problem and you will need to find by the complete clean boot procedure.

  Now you need to find out which third-party program or service is causing the problem.

  Repeat till step 2 of the http://support.microsoft.com/kb/310353 and then continue with the steps below.

  Step 3: Enable half the services.

  (a) start the System Configuration utility.

  (b) click on the Services tab, and then click to select the hide all Microsoft services check box.

  (c) click to select half of the check boxes in the Service list.

  (d) click OK, and then click restart.

  Step 4: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 3, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 3, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  You must repeat these steps until you find which program or service is causing the problem.

  See the Microsoft article as well as reference since it applies to Windows vista and Windows 7.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

• Install Windows 7 Pro on new Inspiron 17R occurs disk hard error message and pilot application

  I want to install Win 7 pro 64 on my Inspiron 17r, which came with Win 8 House.  I use a Dell Win 7 pro 64 DVD reinstallion I bought on Ebay.  He came in a sealed envelope and included a (supposedly) used United Nations w COA / product key, barcode, etc..  I would like, if possible, to install Win 7 in the same partition that currently has win 8 and leave the other partitions several alone to keep the programs presented by Dell.  The hard drive is a SATA 1 TB drive 5400 RPM with a map of mSATA SSDR 32 G, Dell build sheet items 340-9594 and 342-4360.

  When I boot with Win 7 DVD and try to install everything goes well for a while.  Then when the screen "Where do you want to install windows?" rises no disks or partitions are displayed and the following error message is displayed at the bottom of the screen: "no hard disk found.  "Click on load a driver to provide a driver for installing mass storage.  Click on load a driver generates a request to insert the media containing the driver files, which of course I did not.

  So where can I find this driver file?

  Thank you

  So, if you have not already install 7zip (http://7-zip.org/download.html) get the .msi to 32 or 64 bit depending on your version of Windows.

  Download: http://ftp.dell.com/FOLDER01144200M/1/Serial-ATA_Driver_VWCH1_WN_11.6.0.1030_A02.EXE

  Once downloaded extract the file with 7zip.

  

  Click with the right button on the serial number - ATA_Driver_VWCH1_WN_11.6.0.1030_A02. EXE and select Extract to «»

  This will make a folder called Serial - ATA_Driver_VWCH1_WN_11.6.0.1030_A02. EXE

  

  In this folder are f6flpy SATA drivers labeled such as they appear on floppy disks.

  Copy the f6flpy - x 64 (64-bit) to a USB port, when asked to load the drivers select the USB port and this folder.

• cannot get rid of the "removable disk" in "my computer" and "Device Manager", after incorrectly removing a USB flash drive

  I stupidly, twice - after using USB flash drives - just shot when he in fact without removing them properly. Now, they are listed at all times in my 'Device Manager' and in 'my computer '. I went into Device Manager and tried to uninstall them. It seemed to work but the next time I booted up Vista found drivers and now they are back in 'my computer' and Device Manager. This does not seem to be a problem, but I would like to get rid of them.
  Joe

  Hi JoeZZ,

  Please see the following instructions on how to see the ghost devices:

  http://support.Microsoft.com/kb/315539/en-us?p=1

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• VISTA HOME PREMIUM 643 ERROR MESSAGE AND COMPUTER SLOW AFTER INSTALLING VISTA

  I WANT TO GET MY PC RUN FASTER AND AFTER INSTALLING VISTA, IT SEEMS MORE SLOW TO EVERYTHING I TRY TO RUN I HAVE AN EMACHINES T5052 AND IT SAYS THAT I ONLY HAVE 1 GB MEMORY (RAM) BEFORE I WAS USING WINDOWS XP PLEASE I NEED HELP, THUS FREEING UP SPACE AND DO IT RUN BETTER

  OD WINDOW ADVANCED CARE?

  You must have only ONE AV installed; otherwise, you get crashes, freezing, program conflicts, etc.

  Defender is an Anti-Spyware, not an AV.

  The FREE Malwarebytes will work OK with them.

  And do the work that I advised to do. Mick Murphy - Microsoft partner

• having the 1935 error code and can not install windows vista from my recovery disc

  I have a recurring error when trying to install all programs (Error 1935).

  and have reinstalled windows using my vista full 23 bits and when installing any program, even a basic program I get the error code 1935. I have a recovery disk, but I don't know how to start to charge and use the recovery disc supplied with my PC
  can someone help please because I am a beginner

  Thank you very much
  Dave

  Each manufacturer is different things about the recovery partition.  You need to contact the computer manufacturer (online - they can publish procedures - or by telephone) for instructions on how to use the recovery disk (there are probably a combination of special keys at boot that activates the process).  Keep in mind that this type of resettlement will completely eliminate your primary system partition, so don't forget to backup your important data until you try it.

  Here is an article on the 1935 error and solution to fix it.  Maybe this will help (he has a little advanced, but so is the problem then do your best to fight the operating instructions).  http://blogs.msdn.com/astebner/archive/2004/11/10/255346.aspx.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• win 8 forgotten password and fingerprints off after bad attepmts

  Hello world.

  This is what happened to me. On my new lenovo b50 windows 8 I have set up the new different password and a finger. As I used 3 days single fingerprint to connect, I forgot the password, so I saved more than fingers, set of 4. But as I had the task of manual handling, my fingerprints have exploded. Once he didn't accept fingerprints, after several attempts hurt disapeard fingerprint logon. Now, onle is possible to connect with forgotten password.

  Now hold on day 3, but fingerprints connecting restarts not after some time.

  It comes

  Is there some startup or reinstallation of flash just to allow the connection of fingerprints? My fingers are already Ok, just can't use them.

  Or just reinstall windows?

  Thank you fo suggestions

  Solved

  I erased the win password by encrypting program

• Error element in the Navigation after Ajax call from another page

  Hi guys!
  
  For testing purposes, I have created a table, for own 'child' load cells - table in them another page via ajax. Demonstrated here.
  
  Now navigation tabs produces an error

  Item ID (1973468818203630708) is not an item defined on the current page.

  The Ajax routine is performed by the dynamic action. When I disable that navigation bar works as usual.
  
  Anyone an idea what causes the error and how can I solve this problem?
  
  Thank you and Bravo,
  Tobi

  tpetri wrote:
  Hi guys!

  For testing purposes, I have created a table, for own 'child' load cells - table in them another page via ajax. Demonstrated here.

  Now navigation tabs produces an error

  Item ID (1973468818203630708) is not an item defined on the current page.
  

  The Ajax routine is performed by the dynamic action. When I disable that navigation bar works as usual.

  Anyone an idea what causes the error and how can I solve this problem?

  The content from the other page includes a hidden element entry with the given ID. You must eliminate the generation of this element in the page source, or extract a narrower selection so that this element is not included.

  Exactly how this content is generated on the source page? How is he pulled out? How it is injected into the target page?

• Why there Chinese looking characters in the address bar of Firefox after I disconnect from my gmail account?

  I stopped using Firefox when I became aware of a worm that had been prevalent. Recently, I used new Firefox instead of Internet Explorer or GoogleChrome, but now, I'm afraid that my computer may have been compromised because of China looking for characters in the address bar of Firefox, after that I registered on my gmail account.

  This has happened

  Just once or twice

  Is see above story

  If you see CJK (Chinese/Japanese) characters on the title bar of Firefox or Windows task bar, then that can happen if Firefox go to encoding UTF-16 for some reason any.

  The extension Plugin RealPlayer browser Record (Tools > Modules > Extensions) has reported that causes this problem.

  Be sure not to be confused with the RealPlayer plugin (Tools > Modules > Plugins) that plays media files.
  The expansion adds some extra features like save multimedia files.

  You can disable/remove the extension Plugin RealPlayer browser Record in RealPlayer preferences (RealPlayer: Tools > Preferences > recording and download)

  See also the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems

• HP ENVY 5640: claim for a previously owned HP ENVY 564 new code does not change after the disconnection from the WiFi?

  my printer used, I cannot set up an instant with HP ink account as the claim code is already associated with another account. After unplugging my hub and reboot / reconnect, a charge code showed on my touch screen but it says already with another account? Someone at - it suggestions?

  @itsatoucher

  See the following topics:

  Connected HP - Instant ink

  If necessary, call people cloud Support at the number indicated on the web page.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• After Anyconnect I can't access to asa and LAN

  Dear all,

  My office use ASA 5505 and I use anyconnect from outside (sometimes overseas), I can connect to my network and business by ASA, internet access, but I can't access ASA and LAN (network of my client). WHY?

  Office 192.168.10.0/24

  192.168.11.0/24 VPN

  How can I solve this problem?

  ASA Version 9.2 (3)
  !
  ciscoasa hostname
  activate the encrypted password of XXXXXXXXXX
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  passwd encrypted XXXXXXXXXX
  names of
  192.168.11.1 mask - 192.168.11.10 local pool Pool VPN IP 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP address 192.168.10.254 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP AAA. BBB. CCC DDD EEE. FFF. GGG. HHH
  !
  boot system Disk0: / asa923 - k8.bin
  passive FTP mode
  clock timezone 8 HKST
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  Name-Server 8.8.8.8
  Server name 8.8.4.4
  permit same-security-traffic intra-interface
  network of the VPN_Pool object
  subnet 192.168.11.0 255.255.255.240
  network of the NETWORK_OBJ_192.168.10.0_24 object
  192.168.10.0 subnet 255.255.255.0
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  DefaultRAGroup_splitTunnelAcl_1 list standard access allowed 192.168.10.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm-731 - 101.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  interface NAT (outside, outside) dynamic source VPN_Pool
  NAT (inside, outside) static source any any static destination VPN_Pool VPN_Pool non-proxy-arp-search to itinerary
  !
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 AAA. BBB. CCC DDD. 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Activate Server http XXXXX
  http 192.168.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA SHA-ESP-3DES ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-ESP ESP-3DES-SHA-TRANS TRANS-DES-SHA-TRANS
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  Terminal registration
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint Anyconnect_Self_Signed_Cert
  registration auto
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  name of the object CN = 115.160.145.114, CN = ciscoasa
  Configure CRL
  trustpool crypto ca policy
  string encryption ca Anyconnect_Self_Signed_Cert certificates
  certificate 5c7d4156
  308202d 4 308201bc a0030201 0202045c 415630 0d06092a 864886f7 0d 010105 7 d
  0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a 8648
  09021608 63697363 6f617361 31353131 31303131 31363231 301e170d 86f70d01
  5a170d32 35313130 37313131 3632315a 302 c 3111 55040313 08636973 300f0603
  636f6173 61311730 1506092a 864886f7 0d 010902 16086369 73636f61 73613082
  0122300d 06092 has 86 01010105 00038201 0f003082 010a 0282 010100cc 4886f70d
  af43a895 8c2c3f49 ad16c4b9 a855b47b 773f4245 1954c 728 7 c 568245 6ddc02ab
  78 c 45473 eb4073f6 401d1dca 050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa
  454ff4bb 691235ab 34e21d98 4cfecef4 204e9c95 76b1b417 b5cf746c 830788b 4
  60063e89 0ffe5381 42694cf8 d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67
  4ad8954f 5392790b 4ded225c c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a
  d054a290 14316cc0 1670bdea f04c828b 7f9483fb 409fa707 fbe5a257 33597fed
  ca790881 b1d4d3dc b0e1095e bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1
  8b9421fa ee2b99ae df07fba1 0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02
  03010001 300 d 0609 2a 864886 05050003 82010100 c8719770 1305bd9c f70d0101
  2608f039 0dc6b058 0dfe3d88 76793 has 18 8f601dda b 8553, 893 d95e3b25 30ef7354
  772f7d0b 772869d 7 372f8f5c f32992af fa2c8b6e 0f0ae4ce 4e068b8d b7916af2
  affa1953 5bfd01a6 1a3c147d 75d95d8c 1122fa85 3905f27b 2474aff4 11fff24f
  c305b648 b4c9d8d4 9dcf444b 9326cda3 0c4635d0 90ff8dd8 9444726c 82e002ec
  be120937 0414c20a 39df72fb 76cd9c38 cde9afda 019e9230 66e5dba8 ed208eae
  5faabb85 ff04f8f2 c36b724b 62ec52cc f967ee1d 1a6458fc 507a 2377 45 c 20635
  2c14c431 baac678a dcc20329 4db7aa51 02c 36904 75b5f307 f1cc056d 726bc436
  597a 3814 4ccd421d cb77d8f5 46a8ae69 2d617ac8 2160d7af
  quit smoking
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate 5d7d4156
  308201f0 30820308 a0030201 0202045d 415630 0d06092a 864886f7 0d 010105 7 d
  05003046 06035504 03130863 61736131 18301606 03550403 6973636f 3111300f
  130f3131 352e3136 302e3134 352e3131 1506092a 34311730 864886f7 0d 010902
  73636f61 16086369 7361301e 170d 0d 323531 3135 31313130 31323136 35395a 17
  3111300f 06035504 03130863 6973636f 61736131 a 31303731 32313635 395, 3046
  18301606 03550403 130f3131 352e3136 302e3134 352e3131 1506092's 34311730
  864886f7 0d 010902 16086369 73636f61 73613082 0122300d 06092 has 86 4886f70d
  01010105 00038201 0f003082 010 has 0282 010100cc af43a895 8c2c3f49 ad16c4b9
  a855b47b 773f4245 1954c 728 7 c 78 45473 eb4073f6 401d1dca 568245 6ddc02ab
  050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa 454ff4bb 691235ab 34e21d98
  b 830788 4 4cfecef4 204e9c95 76b1b417 b5cf746c 60063e89 0ffe5381 42694cf8
  d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67 4ad8954f 5392790b 4ded225c
  c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a d054a290 14316cc0 1670bdea
  f04c828b 7f9483fb 409fa707 fbe5a257 33597fed ca790881 b1d4d3dc b0e1095e
  bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1 8b9421fa ee2b99ae df07fba1
  0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02 03010001 300 d 0609 2a 864886
  05050003 82010100 00089cd 3 d0f65c5e 91f7ee15 bbd98446 35639ef9 f70d0101
  45b 64956 f146234c 472b52e6 f2647ced a109cb6b 52bf5f5d 92471cb7 a3a30b63
  052ac212 c6027535 16e42908 ea37c39a 4d203be9 8c4ed8cd 40935057 3fe8a537
  a837c75c feff4dcc 1b2fd276 257f0b46 8fcd2a5c cbdcacec cd14ee46 be136ae7
  7cd4ae0d aace54fe 5187ea57 40d2af87 cded3085 27d6f5d8 1c15ef98 f95cc90e
  a 485049 4 805efa8f 63406609 a663db53 06b94e53 07c1c808 61eadcdb 2c952bee
  74a0b3dd ae262d84 40b85ec5 a89179b2 7e41648e 93f0e419 3c482b29 e482d344
  d756d450 8f0d9302 d023ac43 a31469a4 105c8a0c b1418907 693c558c 08f499ef
  364bc8ba 4543297a a17735a0
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev2 access remote trustpoint Anyconnect_Self_Signed_Cert
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign

  dhcpd 192.168.10.254 dns 8.8.8.8
  dhcpd rental 43200
  !
  dhcpd address 192.168.10.1 - 192.168.10.100 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP AAA server. BBB. CCC. Source DDD outside prefer
  SSL-point of approval ASDM_Launcher_Access_TrustPoint_0 outside vpnlb-ip
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-4.2.00096-k9.pkg 1
  AnyConnect profiles Anyconnect_client_profile disk0: / Anyconnect_client_profile.xml
  AnyConnect enable
  tunnel-group-list activate
  internal DefaultRAGroup_2 group strategy
  attributes of Group Policy DefaultRAGroup_2
  DNS-server AAA value. BBB. CCC AAA DDD. BBB. CCC DDD.
  Ikev2 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  internal GroupPolicy_Anyconnect group strategy
  attributes of Group Policy GroupPolicy_Anyconnect
  WINS server no
  value of server DNS 8.8.8.8 8.8.4.4
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  Split-tunnel-policy tunnelall
  IPv6-split-tunnel-policy excludespecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl_1
  by default no
  activate dns split-tunnel-all
  IPv6 address pools no
  WebVPN
  AnyConnect value Anyconnect_client_profile type user profiles
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  attributes of username XXXXXXX
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  attributes global-tunnel-group DefaultRAGroup
  address pool VPN-pool
  Group Policy - by default-DefaultRAGroup_2
  IPSec-attributes tunnel-group DefaultRAGroup
  IKEv1 pre-shared key XXXXXXXXX
  tunnel-group DefaultRAGroup ppp-attributes
  ms-chap-v2 authentication
  tunnel-group Anyconnect type remote access
  tunnel-group Anyconnect General attributes
  address pool VPN-pool
  Group Policy - by default-GroupPolicy_Anyconnect
  NAT - to-public-ip assigned inside
  tunnel-group Anyconnect webvpn-attributes
  enable Anyconnect group-alias
  tunnel-group Anyconnect ppp-attributes
  ms-chap-v2 authentication
  !
  Global class-card class
  match default-inspection-traffic
  !
  !
  World-Policy policy-map
  Global category
  inspect the dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  service-policy-international policy global
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:24991680b66624113beb31d230c593bb
  : end

  Hi cwhlaw2009,

  You must configure a policy Split-tunnel, if you want to be able to access the internal and local network at the same time.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/100936-asa8x-split-tunnel-AnyConnect-config.html

  It may be useful

  -Randy-

• Non system disk or disk error, replace and strike any key when ready

  I bought a new laptop yesterday. I tried to install Windows XP Professional. When I put CD performance system, the error message "not-system disk or disk or error, replace and strike any key when ready."

  Please solve the problem.

  Kind regards
  Bilal T

  Hello

  If this is a new laptop, chances are that there is no available for this purpose XP driver to make it work correctly with XP.

  Web site of the manufacturer of the laptop computer to check for the XP drivers for your laptop model.

  If no driver is available, you're wasting your time trying to install XP.

  If the XP drivers are available, here's how to install XP Professional;

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  See you soon.

• Try to run a 'error checking' and 'defragmentation' on my computer

  Hello

  My computer was slow, so I would like to run a 'error checking' and 'Defragmentation '.

  When I try to run the "error checking" I get the following message: "the disk check cannot be performed because the disk check utility needs exclusive access to some Windows files on the disk. These files are accessible only by restarting windows. You want to schedule this disk check to occur the next time that you restart the computer? " I tried to restart Windows and check the disc again, but I still get the same message.

  When I try to run a defrag, I get the following message: "Disk Defragmenter has detected that Chdsk is expected to run on the volume: HP_PAVILION (c)." Please run Chkdsk /f.' I've repeatedly said no to checkdisk start in the previous paragraph, but I always get these messages.

  No information as to how I can solve this problem?

  Thank you!  Kara

  Maybe you will need to follow the instructions more closely.  If your repeatedly said 'NO', how it's supposed to run checkdisk?

  1. Click to open the computer.

  2. Right click on the hard drive you want to check, and then click Properties.

  3. Click on the Tools tab, and then under error checking, clickCheck now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     To automatically repair problems with files and folders that the scan detects, selectAutomatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

     To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

     To check for errors file and the physical errors, select both automatically fix file system errors andScan for and attempt recovery of bad sectors.

  4. Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note

  • If you select automatically fix errors of system file of a disk that is used (for example, thepartition as containsWindows), you will be asked to reschedule the disk check for the next time you restart your computer.