Disk access error removable CD player... "Z:\ is not accessible. Access denied»

Similar Questions

• Access removable disk error... "Z:\ is not accessible. Access denied»

  1. my (2) flash drives have been available last week

  2. this week, they are inaccessible (on a single computer only)

  On the second computer, I can access the drives normally.

  Clearly, I changed something on the computer problem, but I don't remember what it is.  Probably a registry setting.

  I can't open the drive.  I get the error 'Z:\ is not accessible.  Access denied'

  Although he is running as an administrator ,attempts to format the drive are unsuccessful.  This error is: "You have not sufficient rights to perform this operation"

  Attempts to access the drive through the command line are unsuccessful on the problem computer.

  The drive can be seen in disk management, but may not be formatted or partitioned here (computer problem only)

  On the first computer, everything is normal.  ERGO, the problem is with the second computer.

  Can anyone suggest where I should look in the registry (or elsewhere for that matter).

  Thank you for your help.

  Yaacov

  I don't have an answer after all!

  I just find ControlGuard Endpoint protection had been installed over the weekend.

  Time of work of hacking wee turn it off! :-)

• 1: 0x80042318__2 system restore error: Windows Media Player 11 will not work open__3: Internet Explorer 8 crashes when opening.

  I have these three questions of program after reinstallation of Windows Vista and tried (mostly unsuccessful) using Windows Easy Transfer to move and reinstall my programs and files. My computer had some problems before start, (it would be almost always gives me the blue screen at startup and go into Startup Repair). The Startup Repair wouldn't fix anything and just lose about 20 minutes of my time. Finally, he wouldn't even load at all and the Startup Repair did not help so I decided to reinstall Windows Vista. It worked perfectly until what stupidly, I decided to try and use Windows easy transfer if everything goes well "to" my programs this new copy of Windows Vista.

  So now my questions are: Windows Media Player 11 does not open. I don't see a thumbnails of videos that would open with Windows Vista either. Oddly, although I can use Windows Media Center very well. I also installed Quicktime player and it seems to work perfectly.
  It was not catastrophic but especially a gene. I use VLC player to manage most of my videos very well, but love using WMP before.

  Second: I can't create restore points at all. Once I try, I get this error message:
  "The restore point could not be created for the following reason:
  An error was detected in the copy Service VSS (Volume Shadow). The problem occurred while trying to connect with the VSS writers. Please check the event system service and the VSS service are running and look for errors related to event logs. (Ox80042318) Please try again. »

  Finally, for some reason any after the transfer, eventually after Internet Explorer automatically updated it will completely freeze when I open it. This is for me the prompt to open the session previously was crushed, and if I try that or close the dialog to open just the home page, it will freeze completely, even the blue circle next to the name of the tab to load.
  Fortunately, I have Firefox and Google Chrome installed, both work very well.

  Any help is greatly appreciated. I'm not entirely fretting on IE8 and WMP 11 but I feel really that less stressed if I know that I have a System Restore Point in case my previous numbers start to happen again.

  Here are my system specs, in case that dans le cas ou c' est is somehow useful.

  Dell Studio 1535 laptop
  Windows Vista Home Premium 32 bit
  Service Pack 2 recently reinstalled
  Intel Core 2 Duo 4 Ghz processor
  3 GB Ram
  4.0 Windows Experience Index/Rating

  Big thanks in advance to anyone who can give a glimmer of assistance. I tried searching on these issues online and found no help. My next step is the Dell technical support (.. don't looking forward not to y).

  Do you have these problems if you for testing purposes create a new user?

  Other things you can try after trying the suggestions "Sreenkanth T" is to run the ChkDsk program.

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found

  Windows Easy Transfer moves not installed third-party programs on the whole, he does that move their settings, your files and settings Windows.

  As you have just reinstalled Vista, where were your old programs and files (on which machine) when you used Windows Easy Transfer, you still have access to them?

  You have to maybe do the reinstall once more but forget your settings and just manually copy all of your data?  This way you will give you restart with no old parameters of any other machine?

  You can also consult the third-party program (costs a little money), but he can move everything, including the programs installed.

  PCMover
  http://www.laplink.com/PCmover/index.html

• Windows XP disks "access denied" after a clean install of windows 7

  I'm building a new PC because the hardware failure of my original PC running Windows XP.    I have installed Windows 7 on the new machine and attach the old records of Windows XP.    These discs were shown in the form of "Libraries", but their contents could not be read, and I got the message "access denied."

  In my Windows XP of origin, these discs are fixed either accessible only by the administrator account and not the guest account.

  What is the cause of the error?

  My Windows 7 How to read the contents of these disks?

  Thank you.

  You will need to take ownership of the contents of this drive.

  See:

  http://www.intowindows.com/how-to-take-ownership-of-a-folderfile-in-Windows-7/

• Websites that I could access before you upgrade to Windows 7 on my desktop is ending with error indicating that the site is not accessible. I also use Windows 7 on my laptop and can access these Web sites here.

  Internet explore 8

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  See...

  How to troubleshoot network connectivity problems in Internet Explorer
  [ignore the reference to IE7 or Vista in the section will APPLY to]
  http://support.Microsoft.com/kb/936211

  See also http://support.microsoft.com/kb/967896

  Specific Forum on Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• (dvd player) E:\ is not accessible. The disk structure is corrupted and unreadable

  I get this message when I try to play a cd through "computer." When you insert a dvd movie, the screen gets an a 'multi model' as the places of the miniature and the computer hangs.

  It's a laptop HP DV9000. Instead of buying an external dvd drive, it may be better to buy a new computer, I have other problems.

  Thanks for the help and have a great weekend!

  Louis

• HP 250 Portable G2: 0xc0000225 error code. Hard drive is not accessible, computer laptop HP 250 G2

  I'm doing a clean Windows 8.1 64-bit as a result of a fall, but I'm getting 0xc0000225 error code, using built-in HP recovery utility. Installing Windows also says: Windows could not retrieve information about the disks on this computer. Kindly help. Thank you

  If your computer is originally shipped with Windows preinstalled by HP (as it should) - it would be better to use the HP recovery media that will repair Windows, applications, and all the default partition to factory. It will use the license of your machine for Windows and should automatically active Windows after installation.

  If you are using the 8.1 Windows installation media, you may need a facility to post license Win (depending on the type of used windows).

  -If you want to use the original that are preinstalled windows, you can get a HP recovery media as described above

  -If you are using the 8.1 Windows installation disc and install Windows from using your driver's license, follow these steps:

  1 boot from the Windows DVD
  2. click on install now
  3. in the configuration screen, click Custom (Advanced)
  4. click on Drive Options
  5. Select the partitions to format
  6. click on Format - this will delete EVERYTHING on this partition - format and delete all partitions
  7. create a new partition, and then select a partition to install Windows on.
  8. continue the installation.

  If the Windows installation disc does not work for the above you can do the following to reformat your hard drive:
  1. download a Gparted ISO from here:
  http://gparted.org/LiveCD.php

  2 burn the ISO to a CD or DVD
  2. start from the CD/DVD of Gparted disk.
  3. use Gparted to delete all partitions on the hard disk.
  4. under 'Device' choose Create Partition Table to a new table partition.
  5. create a NTFS partition (or you can wait and create a partition during the installation of Windows).

  Finally, boot from the Windows installation disc and install Windows.

  Let me know if it works for you

• cannot re - install Skype? I get an error like windows error code 1601 Installer system are not accessible!

  After trying to re - install Skype, I received this message. Install Skype has no Code 1601 The Windows Installer Service is unavailable.

  System Setup Windows Error code 1601 can't access.

  After trying to re - install Skype, I received this message. Install Skype has no Code 1601 The Windows Installer Service is unavailable.

  System Setup Windows Error code 1601 can't access.

  Hello Mohammedllyas,

  See if this Skype information helps you with this problem:

  "error installing 1601."

  http://Forum.Skype.com/index.php?showtopic=230501

• We get an error "D: / is not accessible." a device i/o error"when trying to access hard drive

  * Original title: e/s problem

  I am not able to access my hard disk.windows that says: -.

  "D: / is not accessible." an i/o device error. "

  I also tried chkdsk but it says that it is not directly operatable.

  Hi Rishanpc,

  Thanks for the post. I am sorry to hear that you found a mistake "D: / is not accessible." a device i/o error"when trying to access hard drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

   

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. have you checked if the cables are connected properly?

  2 what is an internal hard drive or external?

  3 have there been recent changes made on the computer before the show?

   

  The most common cause of a non-accessible i/o error is a disconnected cable. When the computer tries to access a device, and it's no response after several tests, it will generate this error. Another common cause is when a program tries to access a file that has been removed or eliminated.

   

  Disconnected Hard Drive/cable misconfiguration

   

  Internal hard drives require a specific set up. IDE hard disks can have only one master. If another hard drive has its defining together correctly pin code, a user is perhaps not able to access the data, and he will receive a message that the drive are not available. Cables come off inside the case of the computer also cause a not accessible i/o error. The user can correct this problem by opening the case and attach the data cables for each drive safely at the back of each drive and the motherboard.

   

  You can follow the steps below and check if it helps.

   

   

   

  a. go to "Control Panel" in the start menu and choose 'performance and Maintenance '.

  b. click on 'System' then go to the Hardware tab and click on "Device Manager."

  c. find the device that records an error by developing the appropriate category nodes. If the device has a red "X" on the icon beside its description, the hardware is disabled; Go to step d to activate it. Otherwise, go to step e.

  d. go to the general tab and click on "Activate the device" found in the device status section. then press 'OK '. (Note: you may need to follow the guests, as indicated via an assistant of favorable device.) If you do, continue to click "Next" and follow the instructions until the process is complete.) Test the equipment. If an error is displayed, go to step e.

  e. click the general tab and click "Troubleshooting" found in the device status section and then press 'OK '. Follow the prompts to fix the problem. If an error is still displayed, go to step f.

  f. click the driver tab and click on 'Update driver'. Follow the instructions until the process is complete and then to test the equipment.

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I:\ is not accessible .__Incorrect function___and in the other CD as__Blank that allowing open, DVD RAM, changing to CD player by inserting a correct DVD.

  System configuration: Windows XP with SP3 (Original) and all other Microsoft updates. An engraver of DVD from LG (HL - DT - ST DVDRAM) - SATA & Samsung DVD writer (TSSTcorp CDDVDW SH-S222A SCSI) - PATA later do IE August 2010 & September 2010 with the latest firmware, Nero 8.

  On a previously written DVD Insert, complete correct IE fully functional in other dvd burners / rom, DVD RAM icon changes to CD with two blank CD showing player one and not accessible with the message above in the other happening too the DVD-RAM to CD drive.

  Not understand, reported the problem to the company service centers assuming failed drive to be replaced during the warranty period. Provided with other drives of different model but unfortunately same case again. Searched the Internet, consulted and I have tried all sorts of remedies, but without success. Although all CDs, written or purchased fully functional, only previously written DVD.

  Then tried the solution of Microsoft Solution Center as "Mats_Run.dvd". Same here as that 'Please insert media readable by the CD/DVD drive [I:].  Windows tried to open the CD/DVD drive for you. "and finally as ' media in the CD / DVD drive is not readable (TSSTcorp CDDVDW SH - S222A SCSI CdRom Device' with the status"not set".)

  Wasted a lot of money and time behind this problem try this this, but without success. So looking forward to you for that my major problem not identified as an emergency like with me for needing to use these data. Again, no problem at all on my side of the machine and quality DVD that are required to access. And kindly, as soon as possible. Thank you.

  Lately, just after the announcement of this problem, insert a blank DVD to check DVD writing. And yet even ONCE - DVD RAM changing to CD player in both and in the above statement PATA and SATA a blank CD. Sense DVD is not reading as well as writing. Please add this also.

  Hi Sreeparno Baksi,

  Try the methods below:

  Method 1:

  Uninstall Nero 8 on your computer. You can check the link that help you with the steps to uninstall program to add or remove function below: how to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895

  Method 2:

  Delete manually the filter upper and lower filters from the registry editor. See: (Section: fix it myself: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116 )

  See also the link below: Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP: http://support.microsoft.com/kb/314096

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot access personal files on bitlocker drive, access denied

  Hello..

  I'm in a bad position now

  I have a partition on my hard drive in which my r dating site it.

  I have HT he remained bit locker and locked the drive... and I opened it several times...

  five days back... Wen I'm abt to open... bit locker window does not open, and instead a window with acess denied is bulging... I'm not able to acess animating

  Wen I'm abt to open it shows e disk access denied

  .. and in its properties... He showed space 0 of 0

  It must be actually 107 GB drive...

  What shd do now... pls help me...

  Hello Veronica,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  When you encrypt fixed data usingBitLocker Drive Encryptionreader""or encrypt a removable drive using BitLocker, you choose a method to unlock the drive. The method you choose depends on the type of drive that you encrypt the flexibility you want and all the requirements defined by your organization.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  How to use the unlock options in BitLocker Drive encryption?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-use-the-unlock-options-in-BitLocker-Drive-encryption

  Additional information:
  Scenario 6: Specification of how unlock the operating system protected by BitLocker drives (Windows 7)
  https://TechNet.Microsoft.com/en-us/library/ee424319 (v = ws.10) .aspx

  Scenario 7: Specifying how to unlock the fixed or removable data drives (Windows 7) BitLocker-protected
  https://TechNet.Microsoft.com/en-us/library/ee424320 (v = ws.10) .aspx

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Re-installed Windows XP on another hard drive after corruption and cannot access a folder "access denied."

  Windows XP has become corrupted, so I installed XP on another drive and two drives installed in my computer.  I can access all files, except for one. I get the error "F:\My Documents\Temp is not accessible access is denied."  Does anyone have an idea how to access?

  Thank you

  See How to take ownership of a file or a folder in Windows XP .

• \\N-PC is not accessible. You might not have permission to use this network resource while trying to access the network computer

  Title: Cannot access computers on my network?

  For some reason any my computer won't let me access any computer on my network.

  When I try to open any computer, including mine, since the tab "network" on the left he gives an error message saying "\\N-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid.
  I ran the corner store to home group and network troubleshooting & two is out clearly said there are no problem.
  Anyone know how to fix this?

  Hello

  -What are the versions of the operating system installed on the conencted to computers in the network?

  -Did you do changes on the computer before this problem?

  Step 1: I suggest you to choose a network location, and then try to access the computer and check if it helps.

  Choose a network location

  http://Windows.Microsoft.com/en-us/Windows7/choosing-a-network-location

  Step 2: I also suggest you to check the network troubleshooter event logs to solve network problems and to check if it helps.

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Step 3: If the problem persists, I suggest you to follow the steps from the link and check if the problem persists.

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  For reference:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Step 4: Disable the Antivirus

  I suggest to disable the Antivirus/Firewall temporarily, then check the issue.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Note: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Hope this information helps.

• Satellite Pro M76E - CD player does not recognize blank CD D:\ is not accessible

  Hello.

  Just recently, my satellite pro m76e ceased to recognize blank CDs. If I stick a CD it recognizes that it is a CD, but if I click, it throws an error message indicating that "D:\ is not accessible. Incorrect function. "I tried the search for driver updates but couldn't find one, and toshiba sites says you don't need additional drivers for the internal CD drives.

  The drive works fine for everything else. It's just empty CD. Any advice would be welcome.

  See you soon. Dan

  Hello

  One question; Why you want to read a blank CD? ?:|
  As you say all the CD and DVD is recognized, but only the blank CD cannot be read.

  Regarding the driversa? ... you're right, the update of the driver is not necessary and is not possible because the Windows operating system uses a clean Microsoft drivers to run the ODD.

  But have you already checked these threads?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24238

  There are a few proposals of solution that helped solve a similar a? D:\ is not accessible. Incorrect FunctionA? problems with the CD/DVD drive.

• Impossible to update of Windows Media Player and Microsoft Security Essentials and the error is "access denied error 80070005."

  Apparently an involuntary change of administrative privileges or permissions (Windows XP Pro, SP3) keeps me updated Media Player version 9 to 11 v. and updated virus Security Essentials definitions.
  For Media Player, wmsetup.log reports access denied error 80070005 and UpdSpAPI.log reports access denied for the HKLM\SOFTWARE\Microsoft\MediaPlayer\Settings\MP3Encoding\LowRate registry key. In regedt32, I'm blocked from display HKLM\...\MediaPlayer\Settings and below, and "are allowed to view the current permission settings, but... can make a change." Except that I can't. I can enter the change but get «...» Access is denied"trying to apply them. So this is the first problem that I need help.
  But of course it's more than a registry key and the subkeys, because MSE too is affected and will download but not install virus definitions. WindowsUpdate.log reports: failed to install with error 80070643.
  My user account (it's the only one!) is part of the Administrators group and all that I tried to verify administrative permissions is positive. This is a new issue. No virus/malware, according to MSE, Lavasoft Ad-Aware, MalWarebytes Anti-Malware.
   
  Original title: cannot update Media Player or Microsoft Security Essentials - access denied Erors

  Hello

  Question: Impossible to update Windows Media Player

  Run the Fixit and see if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Problem: cannot install Microsoft Security Essentials

  Perform the steps from the link below and see if it helps.

  I can't install Microsoft Security Essentials

  Hope this information helps.