(dvd player) E:\ is not accessible. The disk structure is corrupted and unreadable
I get this message when I try to play a cd through "computer." When you insert a dvd movie, the screen gets an a 'multi model' as the places of the miniature and the computer hangs.
It's a laptop HP DV9000. Instead of buying an external dvd drive, it may be better to buy a new computer, I have other problems.
Thanks for the help and have a great weekend!
Louis
Tags: Windows
Similar Questions
-
Original title: corrupt master file table pleae help
Hi all I have a problem I hope that someone can help me with
first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance
Hi helzf,
You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.
Check out the link:
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.
Hope this information is useful.
-
Error 0 x 80070571: the disk structure is corrupted and unreadable
I recently had an error message saying "error 0 x 80070571: the disk structure is corrupted and unreadable," in reference to C:. I tried chkdsk oh so many times. No change.
Recently, I was able to access the C: files sporadically. Occasionally, sometimes not. However, I can access my files in safe mode.
When I start in normal mode, the system is acting funny. I will try to describe. It starts very well, go anyway for the office and everything. Sometimes, I am able to use the laptop for a few minutes until everything freezes but the cursor; nothing else responds, even not ctrl + alt + delete. Other times, I'm still not that chance. You know how pointing the cursor on an icon temporarily highlights the icon? Highlight the thing is sometimes just to block the system. Once locked, all I can do is hold down the power button.
I tried the system restore, but it never once helped me with the cause of the system error.
I also deleted some programs out of the startup list. Not sure if this would have an effect.I am running Vista Home on a HP Pavilion dv5.Thanks for the reply.
I tried all three methods.
Methods 1 and 2 have helped for a while, but not long. Method 3 found nothing.The only solution I can think of is to backup my personal files, then do a system format. Before you do a format, is there anything else that you could recommend?
-
D: / is not readable. This disk structure is corrupted and unreadable.
Shows when I try and look at photos on a CD that I created.
Will work on the laptop, this disc was created, but does not and another laptop computer.
Any ideas?
It seems that the disc has not been finalized, so that all computers can read. Use the laptop, it works on the to make.
Alternatively, the disc format is not compatible with the laptop on that it does not work. Is this just a data disc? How you did it? -
The file system on the disk structure is corrupted and unusable. ...
Dell Optiplex 3010
WD5000AAKXWindows 7 Pro SP1 64 bit
This is the drive that contains the operating system and was just replaced on 23 July. I restored the disk backups using Acronis True Image 2014.
From July 25, I started to see
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume of OS utility.
in the system (Source Ntfs, event ID 55) event log.
I ran a CHKDSK /R on the disk and it reported no problem with the drive.
Except for the scary messages in the system event log, I see no problem, but I also don't see these errors on the other disk in the machine.
[I forgot to mention that the drive passes diagnostics pre-boot]
What happens here?
I see nothing in the article in PC Magazine directly addressed the problem. You were talking about the complexity and the possibilities of seriously screw things with True global Image?
In addition, the link to the Microsoft solution irritates me to 'we're sorry, the requested page is not found.
However, I think I found the solution, and it is quite related software.
After scouring the logs of system events and application, I realized that the error I've been see is still bracketed by the subsystem VSS starts and stops and was almost always related to a backup operation or a virus scan.
Some research (Google search, in fact) have allowed me to suspect that successful shadows of the disc were somewhat corrupt, so I simply deleted them (vssadmin delete shadows / for = c: / all). Since then, there has been no error reported, new instant shade have been created, and everything else works OK.
-
However, chkdsk finds no problems, so what happens?
Checking file system on D:
The type of the file system is NTFS.
Volume label is A RAID.One of your disks needs to be checked for consistency. You
may cancel the disk check, but it is strongly recommended
that you continue.
Windows will now check the disk.
Cleaning of minor inconsistencies on the drive.
Cleaning 9 unused entries index $SII of file 0x9.
Cleaning 9 unused entries index $SDH of file 0x9.
Cleaning unused 9 security descriptors.
CHKDSK checks Usn Journal...
Audit of the USN Journal is complete.
CHKDSK is verifying file data (stage 4 of 5)...
File data verification completed.
CHKDSK is verifying free space (step 5 of 5)...
Free space verification is complete.244196000 KB total disk space.
126454172 KB in 238052 files.
109736 Ko 22501 index.
0 KB in bad sectors.
868124 KB in use by the system.
65536 KB occupied by the log file.
116763968 KB available on disk.4 096 bytes in each allocation unit.
61049000 total allocation on the drive units.
29190992 allocation units available on disk.He is so little known about your configuration - because the forums MS Answers do not ask for information, when a new question is asked.
If you run some kind of RAID configuration, you might do better if you describe your RAID configuration and after the actual event that you see in the event log (is it event ID 55?). Then maybe you will get some ideas of the Microsoft Support engineer who might actually work.
You see just this event in the paper at random times or is it when you try to run a specific operation and if yes, what operation triggers the event? Here is an article of MS to help get you started, but if you use Google to search for the error message, you can find more ideas:
http://support.Microsoft.com/kb/246026
If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.
Here's how to publish events to the event to display the log files:
If you double-click on an event, it will open a window of properties with more information. On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.
When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis. Remove all personal information from your information after you paste If you are forced to do so.
If you paste an event, it will look something like this annoying system startup event:
Event type: Information
Event source: Service Control Manager
Event category: no
Event ID: 7035
Date: 14/07/2010
Time: 17:54:18
User: Jose
Computer: computerDescription:
The Remote Access Connection Manager service was sent successfully a starting control.To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.
You can search for events on the World Wide Web and get ideas. It's where people events they see and then to the top of their questions, ideas and solutions:
http://www.EventID.NET/
If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.
-
What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?
Disconnect, and then try to connect again. Use a different cable.
-
Windows 7 - DVD does not read the disk on the computer.
My DVD does not read discs, when I click ion DVD player on my desktop shows insert a disk me error help
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://Club.myce.com/F61/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I bought 10 items on the disk and now need to install it on a new computer that lacks a dvd player. Download it from the Adobe site?
-
I try to install my photoshop material... but I have not a dvd player... is any way for me to do this without a dvd player? I already bought the software in a form of DVD
Download Photoshop Elements products | 10, 11, 12, 13
Mylenium
-
How can I fix my dvd player so it will play the DVD
I ordered a new DVD player on amazon, he came straight from China. Now it will not read the dvd. and there is no region tab change the region in the dvd drive properties.
Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.
Hello
Check with the support of creating DVDs, their online documentation and drivers.
Troubleshooting and ask questions in the forums about known problems. Don check
for Windows 10 compatibility.Click with the right button on the Start button CD/DVD Player - Device Manager - double click
the player - driver tab - click on Uninstall - then OK - reboot the computer for
reload the driver. If no help go back and try to update driver, and then click OK.More troubleshooting.
1. control - troubleshooting - hardware and audio Panel - configuration of a device.
See if this resolution of the problems of aid.
2 Panel - Device Manager - DVD-CD drivers - right click on the disk -
Driver tab - uninstall the drive - and then restart the computer3 see if this helps:
FIX: DVD drive not detected in Windows 8/10
http://www.intowindows.com/fix-DVD-drive-not-detected-in-Windows-8/=====================
If necessary we will test the CD/DVD player to see if it works at all:
Try this to see if the drive is viable at all (you will need to make of these on)
another computer since your willingness not to not start - XP, Vista, 7, 8/8.1 or 10
(or even under Linux is not serious). You can also try to start with
another drive in Windows - any OS but do not use it to try to repairs
unless it's absolutely the same version of Windows on your system - just
start to see if the drive works. You can even make a boot Windows 10 DVD
disk by running the creation of Windows Media tool (on any computer)-Tool for creating Windows Media (make 32 or 64 the two same disk as the operating system
the version you are using.
http://www.Microsoft.com/en-us/software-download/Windows10/ Settings (BIOS/CMOS) often F2 then watch the display as launch you - set
the order of boot on CD/DVD first. Don't forget to when.Or ry boot from a Linux boot disk.
If the player does not start to these then there no or there is other equipment
problems that affect it. However, even it doesn't start that does not mean there is
other functions not possible some hardware problems affect the reader.Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.htmlSystem Rescue CD
http://SysRescCd.org/Main_PageScan a Windows PC for viruses from a Ubuntu Live CD
http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computerCheck the wiring of course that nothing is not loose.
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
SONY DVP-SR760HP DVD player plays does not MP4 or AVI videos
Hello
My newly bought Sony DVP-SR760HP DVD player plays does not MP4 or AVI connected by USB videos. His power play only videos in VCD format. Its giving "unsupported format error" for MP4 videos. From the information provided, it is supposed to play MP4 videos less than 3 GB.
The video player is faulty?
Thank you
Nitin
Hello douradosolange
-
Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.
CD/DVD players use different lasers to read CD DVD vs. Eventually, your DVD laser has grilled. It might be time to replace your CD/DVD drive.
HTH,
JW
-
My PC has XP Tablet installed. I would like to re - install (it's so slow) but do not have the disks (PC was good for me to my business when I'm retired). I have XP Home disks and another valid product key and not used. I don't need the features of the Tablet, just a working pc. Can I do this?
Toshiba Portege P3500, XP Tablet. 2 GB of Ram. Has had a lot of software installed and uninstalled during the years, and even if I do cleanups and defrags, etc, it's still dog slow. I want to just start from scratch.
Yes, you can install your unused copy of Windows XP Home Edition, assuming that it is a "Full Version" and not a "Version upgrade".
-
Help with my computer of dumping
I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?
If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.
Maybe you are looking for
-
For some reason a business the company website does not load on my desktop PC. The page is grey and white with a few titles and a circle in the middle which goes around and round. I have previously (a few months ago) has been able to access the site
-
Boot Camp install fails: cannot create the partition
512SSD i7 MacBook Pro late 2013 Boot Camp Assistant 6.0 O/S 10.11.2 true (paid for!) Windows 10 home Create USB boot exactly according to the instructions of the Boot Camp Assistant (time consuming) Re-partition Mac SSD in Colombia-British Deputy wit
-
Hey is the Nvidia GeForce gtx ti 750 FTW work in the Hp envy 700-214.
-
Need help with measurement excitation current OR 9219 Module
Hello I have problems to find the answer to my question. My question is... How do you analyze the excitation of a 9219 module current? It seems that the excitation current which is specified (0.0005 (A) is not what is provided at the exit. With a
-
Verclsid.exe taking 30 seconds to complete
Various programs on my computer regularly cross periods do not respond for up to 30 years. I have a correlation between these periods to the verclsid.exe process running. When the process is complete (it disappears from the task list), the original