Disk check frequently, but not consistently on boot up.

Similar Questions

• Machine Vista "frequently", but not always, ask user name and password to access the public folders on the XP machine.

  Location:

  4 x Vista computers
  1 x XP computer acting as a server file, all the data in the "shared folders".

  All 4 Vista computers were to access shared data on the XP machine for two years without problem. All of a sudden this week one of the Vista computers "Frequently" but not always ask for a username and password to access the machine XP - not only shared folders, but still a list of shared resources on the machine XP via my network places is the result in the box of "connect to" request credentials to appear. All 3 other Vista machines have no problem to access the XP machine, so the problem must be with the a Vista machine.

  To put a spanner in the works as I have said in this case "Frequently" and by that I mean probably 9 of the 10 connection attempts. Let's say, you can see the name of the computer in my network places, you double click it and have asked for credentials, cancel the attempt and to repeat 4 or 5 times and then you could get display shared resources without going into the details of connection. For a few minutes, you might be able to access all the shared data and to navigate through the folders, but then all of a sudden have asked you credentials and can not access to anything, even the files accessed you seconds before.

  Lets say you are able to access the shared folders, you navigate to the Parent folder, then under A folder, then a subfolder B, go back to A notebook, then try to access folder B even once and you get guest credentials, quit out of the network completely locations, navigate back to the XP via Network Places and this machine you not even be able to display all the shared resources on the XP machine.

  I've also set up a shared folder on a Vista machine with matching username and password on the machines and the Vista machine with the get the problem exactly the same problem so this definatley Vista machine with the question and not sharing files on the XP machine.

  Someone at - he met before or have any suggestions?

  Hi MikeBarnes,

  You can check in the Analyzer for performance and reliability.

  Step 1:

  To start reliability monitor and performance monitor

  a. Click Start, right-click computer and click on manage.

  b. in the Microsoft Management Console navigation tree, click on performance and reliability.

  Step 2:

  You can also try a system restore to a point before the problem started.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Disk hard online, but not visible in Windows Explorer

  Hi guys, I need a little help.

  Today, I installed an old 80 GB Maxtor Diamondmax 10 PATA hard drive on my other PC, a Dell Inspiron 530, as a second HDD. I had to order new parts to connect actually upward from the power supply and motherboard SATA and IDE connections are not, but all those who are working very well.

  My problem is that this Maxtor drive does not appear in Windows Explorer. BIOS, see Device Manager it disk management he sees (and even said it's online). Just not Windows Explorer.

  In disk management, it is not a drive letter assigned to it, and when I right click on the disk partitions, anything but 'Delete the Volume' and 'Help' are grayed out. (Screenshot here: http://i39.tinypic.com/2ujpbeo.png)

  I'm a bit stumped, it's almost like I can't use the drive at all. Any ideas?

  Here's some more information about the system:

  OS: Windows Vista editions Home Premium (Build 6002, Service Pack 2)

  BIOS: Phoenix AwardBIOS review 1.0.18

  Motherboard: Foxconn G33M02

  CPU: Intel Pentium Dual-Core E2140 1.6gHz

  Memory: 3072 MB DDR2 SDRAM

  First HARD drive: 250 GB Hitachi SATA sister

  HARD drive secondary: 80 GB Maxtor Diamondmax 10 PATA (with jumper set to "Master DS")

  GPU: ASUS EAH4670

  And I should add, just in case... This is PATA to SATA card, I use the drive: http://www.ebay.co.uk/itm/320759737706?ssPageName=STRK:MEWNX:IT & _trksid = p3984.m1439.l2649

  And I just use a SATA to Molex cable I found to convert the power.

  Thank you

  Hello

  Thanks for this info. I looked more into filesystems and it turns out that the disc was either FAT or NTFS - it was EXT2 which is a Linux file system. I found this by starting Ubuntu that supports multiple file systems.

  I didn't format it had data on personal, but I found an EXT2 driver and can now browse the Windows hard disk.

• Conversion of thick disks into thin, but not for any space back

  Hi all

  We have been the conversion of the virtual disks from thick to thin over 30 servers using the method in offline mode, as we don't have storage vmotion:

  vmkfstools-i SERVERNAME.vmdk d thinSERVERNAME.vmdk thin

  The virtual machine is a good mix of NT4 until 2008, vsphere 4.1 all patches installed until 01/05/11. Some we have been recovery of space well when comparing the original vmdk and sizes of vmdk converted file on the console with 'ls s' and 'Browse datastore' in the viclient, but others that we do not get something back into space?

  Using Windows disk defrag to analyze the disks it shows there are no data at the end of the disc also surely the disc should shrink to where the last piece of data on the disk is?

  What you have to do to thin to reclaim any unused space on the virtual FRONT thickness conversion machine drive?

  Once that a disk block was written for her data even if the files have been deleted. You must use something like sdelete before use vmkfstools. Products like sdelete zero free space allowing you to reduce the disk.

• Why my WMP will burn a WAV file as a disk of data, but not as an audio disc?

  I have an audio file that began as part of a power point presentation. It is now saved as a WAV file. I have successfully he burned as a data disc, but need the disc is playable in a cd player. When I try to burn as an audio disc, WMP gives me the error message "Windows Media Player cannot open the WAV file."
  Why can open and burn the file as data disc, but cannot open the file when I am trying to burn an audio disc?

  E length is 11:11, baud rate: 16 Kbps, media type: audio, the file is not protected. I have WMP set to burn at slow speed.

  Any help would be appreciated.

  WMP should be able to read the file. But to burn I do not. I never use it for burning.

  Audacity is a free software and is a full blown audio editor, where you can change the bitrate by exporting (save as) the fileas, which is required FRO Redbook 16 bit burning.
  See you soon,.
  Jerry

• can eny help every time I turn on my pc, on that I get a blue screen and a message check disk on C: but he did not need compleat finish get access to drive C

  When the pc is completely booted I try and do a defrag and it will tell a disk check is scheduled to run on the C drive and run a chkdsk/f., I check't calendar and nothing is there to be dun the other thing I foud is two disks are fat32 (drive F G and slaves) but the C drive is ntfs? How is this has happen'd I can change in fat32 or the other and not lose data? and how can I stop this? and when I road RUN and type chkdsk/f. it due not reconice it any idea of each?

  Hello
  Here's how one gives info complete http://www.updatexp.com/windows-xp-chkdsk.html if this post can help solve your problem, please click the mark as answer check on this page, that it helps people who need quick access to answers THANKS AND GOOD LUCK

• Checking system files on...- One of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press a key in the second.

  The Windows boot splash screen appears and then I get the above message on a BACK screen when I start my laptop.  I am running Windows 7 64 bit... it does not recognize when I try to ignore it and it freezes.  I tried hard to stop and start again without luck to get past this screen.

  Suggestion:
  Let the system run the disk check. Will take some time, but let it run.
  After that, read the answer below on how to stop it in current check disk at startup.

  Here is the answer to a similar question
  Answered by: Amrita M, Microsoft support, moderator
  Date: December 27, 2009

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/35f58c69-7a6c-4e1b-AEC3-26d7131ec643

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Power output during the disk check currently not able to boot to the desktop

  Power output during the disk check.  Now, does nothing.

  I started my system, he said to check the disc. The disk check began, he had run for a while. Then my power is out for a few seconds. Once the power was back on that I tried to reboot and nothing. The monitor shows no info yet. Just black says no signal and turns off. I have no option to boot or anything else besides. What I can do. Thank you

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can connect the monitor to a different display port or connect another monitor if possible and check if it works very well.

  If the monitor is right, it implies that there is a problem with the graphics card or motherboard. In this scenario, I recommend you contact the manufacturer of your computer for help.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Disk check does not

  At the start of my Dell Inspiron 1501 laptop with vista I get the following message "checking file system on"c", one of your disks needs to be checked for consistency. Disk check was cancelled. Because this message appeared startup and shutdown has slowed considerably. Any suggestion would be appreciated.

  At the start of my Dell Inspiron 1501 laptop with vista I get the following message "checking file system on"c", one of your disks needs to be checked for consistency. Disk check was cancelled. Because this message appeared startup and shutdown has slowed considerably. Any suggestion would be appreciated.

  The system said to do a check disk.

  Here is the tutorial to do disc check... chkdsk.
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If the tutorial seems to be a bit confusing, try my version...

  Start button > in the search box, type cmd > turn to upper-left, done right click on cmd.exe click on Run As Administrator > in the window black and white, at the prompt of flashing, copy and paste this command line... chkdsk/f/r
  * note: there is a space between 'chkdsk' and ' / '.

  > Press the Enter key > you will see a message that says: he can do right now, but you want to reboot (I am paraphrasing) > type Y as in Yes > press > release cmd wind > restart your computer.

  Check the disk will begin to run at startup > do not stop the computer > it will take a while > just wait > the computer will restart when done.

• Re: Satellite M70-339 DVD movie disks but not recognize Virgin DVD or CD?

  Hello

  My Toshiba Satellite M70-339 recognizes the DVD movie but not blank blank DVD or CD discs.
  It happened some time ago and I'm ever round to sorting. INE day that only, it has stopped working.

  I have since reformatted all the computer several times, but it has never begun work again.
  I can watch a movie, a DVD OK, but when I try to burn anything to a DVD or CD, it don't think that there is a disc in the machine to engrave on Virgin.

  I tried the software built into Windows XP, burning CD and it does not work, nor does any third-party CD or DVD burning software.

  Just to reiterate, I want to be able to burn the files to CD/DVD again.
  Can someone advise?
  Thank you

  Windows XP Service Pack 3
  1.70 GHz Pentium
  1.99 GB Ram (upgraded self)
  Carpet * a DVD-RAM UJ - 841S internal DVD Multi Recorder

  Hello

  Check this box:
  Remove the drive CD/DVD from the list of Device Manager.
  Go to the registry and remove the filters above and below the following key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Restart the unit.

  By the way; I also recommend trying different disks, CDs and DVDs from different manufacturers. Discs R TDK is a good brand and good qulaity I use this and I m satisfied

• Why the disk check is not complete?

  I foresaw a disk check and received a message that replaced windows cluster bad file 23773 name Windows\software\download\6EC896~\BITE.tmp, but it will not continue beyond 99% in step 4 of 5.

  Any suggestions?

  It is a Dell Insperion notebook.

  Earlier, I got the error message when you try to start in normal error Code 2000-0141, that says to remove and reinstall the hard drive. This means it needs a new hard drive?

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_126A722713F6D0D0E0401E0A55174AE6&isLegacy=true

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• I'm on disk check utility, how do I know when its done and how I know whether or not, I have a problem?

  I have Microsoft windows, I have a laptop, windows vista, I ran CCleaner, Speedy PC Pro, Uniblue registry Booster and security system from Microsoft that comes with this system. Now, whenever I run these or any program on my computer that has to do with safety or clean my computer or any fixing problem, I get a message that appears from the bar saying run disk utility to check off tasks? I know you probably want to know what the message says, but I can tell you that he keeps telling to run check disk utility.  the full message is "corrupt Registry Booster.exe file or directoryc:\program key is damaged and unreadable. Run the chkdsk utility.  What can I do to fix this?

  ... Initially re-read your error message.
  ...." Corrupt Registry Booster.exe file the file or the directoryc:\program

  data\microsoft\crypto\RSA\machine keys is damaged and unreadable.

  Your registry booster has damaged your system.

  Uninstall Speedy PC Pro and Uniblue Registry Booster. They is snake at best, disastrous at worst oil.

  As the CCleaner, it's ok as LONG as stay you away from registry option in the left column. Never use registry cleaner... period.
  Registry cleaner could be useful in the hands of accomplished computer experts.
  In the hands of regular users, it's a time bomb.

  You said... more security system from Microsoft that comes with this system.
  Only the security system that comes with the operating system is Windows Defender and Windows Firewall.
  This is not enough. Advise to install Microsoft Security Essentials...
  It's a free program and good enough for home use.
  A point to note: stop Windows Defender because he has his own Defender. 2 defenders running on the same computer will create conflicts. It's normal.

  How long disk check run...

  Depending on your system. More "junks" in the system, more time. In general, it takes some time. When it runs, don't interrupt, don't stop the computer.

  How do you know you have a problem or drive no check...

  The system will create a log of disk check. Here's how to access the Journal:

  Start > in the search box, type event viewer > Enter >
  the column on the left, click on the pointer before Windows logs
  Select (left-click) Applications, and then
  Click with the right button on Applications
  Select search
  in the 'search box', type chkdsk
  Click next
  leave the search window
  the middle column, you will see Wininit 1001, click
  right column, under the event 1001, Wininit, click Properties of the event
  A new window with the diskcheck newspaper.
  You can use the slider to display, or click the button copy and then paste it to the one that you want to use, such as Notepad or wordpad.

• I think my IE has a virus but not of my scans for virus or malware checks come up with anything. Is there a way to check this?

  I think my IE has a virus but not of my scans for virus or malware checks come up with anything. My computer is running VERY slowly, lagging behind, or even on an occasional basis freezes and stops when I'm on the net. Computer function uses only the net works fine until a program I use try to use Windows Explorer. Is there a difference between Explorer Windows and Internet Exporer and is there a way to check this, other than the usual scans. I have McAfee and AVG, as well as malicious software running on a schedule and they are still running in the background, constantly analyzes the sites.

  I am at a total loss here. I use secure sites (https rather than just http) when the choice and do not use sites that McAfee or AVG is marked as dangerous. It worries me that I have a lot of things, such a Bank, online and not worry that someone could get information. I recently also maually run the two scan disk and Defrag but they can also be programmed to run on a schedule. The model is NOT saved. When I tried ot create a backup disk, when I first bought the model, something has gone wrong, and he refused to back up then reset would mean a great loss of material. If it's a virus, worm, etc., it is done gradually and I'm not sure that a restart of the plant would be useful it is in IE or Windows Explorer (if there is a difference).

  Yes, it is safe to uninstall McAfee.

  I recommend you to read this review: http://www.techsupportalert.com/best-free-anti-virus-software.htm
  You can also try CCleaner: http://www.filehippo.com/download_ccleaner
  "CCleaner is a freeware system, privacy and cleaning tool optimization. It removes unused files from your system - allowing Windows to run faster and free up valuable disk space. »
  
  
  Brian