Disk not appearing file is not in the list of the 'Source files' Installer

Similar Questions

• get error message SCR ADE 4.5 E file is not found, the source file cannot be read.  Tried to withdraw approval of & re allow including factory reset and re load but still can not read the library on my Kobo Touch book.  With the help of Windows 10...

  Hi, when you try to read the book from the public library on my Kobo Touch I get error message SCR ADE 4.5 E file is missing could not read the source code.   I tried to remove and re downloaded from the website of the public library (no luck), I did the resets, including plate and re authorizing with the reset factory and re loading (no luck).  This problem started after the last update to 4.5 ADE unfortunately as before no problem.   If anyone has any ideas, would be appreciated.   Thank you.

  Try it work when you uninstall 4.5 and install new 3.0: the Adobe Digital Editions software downloads

• Mysterious < br > tag in live code, and not in the source code

  I have a problem here, as mentioned above, with ma page Web.  When you go to this link:

  www.tsohngyun.com

  you will find a space perfectly size between menu horizontal blue and red background that lines on two images (image of the handshake, 'Welcome to the Master Insurance Agency' image).  When I look at to inspect the Web site in Dreamweaver in live code, I noticed a < br > tag sitting just before the tag of table containing the red background.  However, when I go back to the source code, the < br > tag is not found by the opening table tag.

  How can I change something that is not in the source code?  I want to get rid of this gap! Help, please!

  And this
  tag does not exist in the source code of your Dreamweaver? Really?  Because it is based on what I see in your code, you
  Tags on line 31, line 35, line 42, line 45 and 49 of your code line.

  Dreamweaver in code and design split view and see if you can spot the
  tags in your code (can even use useful tool to search and replace in Dreamweaver to find each istance of the)
  tag in your code.) Now, not all of the
  the tags are innapropriate so don't remove them just good willy nilly.

  In any case, hope this helps.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• MD1000 attached to MD3000. Virtual disk not on the preferred path

  Hello

  I have a MD3000i box connected to 2 boxes of MD1000, these are connected to a Dell Power Vault Storage server 2003 running.

  Last night I connected the 2nd MD1000 and added in 25 TB of drives worth. I had initially hurt mapping the new virtual disk after 20 minutes or so, I noticed that I had shot the Ethernet cable plugged into the Module Raid 0 by mistake. I plugged it back in and was able to map the drive and started the initialization of disks.

  I came this morning to check how everything is done and found an error on the table. Disk not on favorite virtual path, preferred owner: at location 0 RAID Controller Module. Current owner: Module to slot 1 RAID controller. Group MD1000_2 of disc. Ramdisk: Virtual4.

  Now, it seems that influence the new virtual disk that I created. I checked the path virtual disk property and all the other virtual disks are using path 1 and try that I created to use channel 0.

  The virtual disk seems to be working for the moment it is detectable and to initialize itself in the area of operations of MDSM. I'm under pressure to get the space of storage as soon as possible, so I can't really afford to have to blow the virtual disk and restart the initialization. I'm hoping a simple reboot of the storage array will cure the problem, but I guess I can't do so until the end of the initialization of the disks. I could also remap the path to the virtual disk, but I saw online that it does not solve the problem, and I always have to wait until the initialization is complete.

  Any help would be appreciated.

  Hello

  I deleted the disk group and created a new one that even once, did not help even after that I tried to change the path. I deleted again and created a new and then changed to RAID 1 controller quickly while he was still on the controller 0 (before it came with the failure of the path) as the preferred path that has cleared the error. There must be a mistake with the controller or the wiring to it.

  Thank you

• First will not quote the source files, it is trying to locate

  Hi, when I opened a project first wants me to identify the source files but it fails to tell me that he's looking for! Anyone know why?

  Looks like you're on Mac El Capitan (10,11, x), is - that correct? If Yes, some dialogs changed with 10.11 Mac and affected dialog boxes are more display the title bar, which is where this information is displayed (this affects a number of applications, not just the first one). Is a question that is being investigated because he was not a problem on Mac OS 10.10.x.

  FWIW, in the latest versions of CC, the feature has been added to the Media link dialog box, which displays the path information in the dialog box. I know that it is not for you, since you are using CS6, but FYI if you plan to update.

• image / photo not appearing is not in the source monitor or program

  I work in Premiere Pro CC 2014. I can't see the pictures / images in the source monitor Panel or the program monitor. I can see the thumbnails in the bins, but when I drag the sequence or in the source monitor, the image does not come to the top in monitors. I can see the images in AE and in first Pro CC.

  I have reset the workspace. I restarted the computer. It does not matter what is the file format.

  Thoughts? Thank you.

  Hey!

  Have you tried to change the video rendering engine? If not, go to file > project settings > General and change the rendering engine video software of Mercury playback engine only. Click OK, and then select "remove previews."

  I hope this helps...

  Regalo

• Could not get the Source monitor and program to display together

  Hi, I use Premiere Pro constantly for about 6 or 7 years and have never had problems with the monitors Source and program appearing side by side in my workspace.  I've recently updated to CC and, in addition to having one monitor 'fixed' and a sudden 'floating' (I've unable to paste the two up, but would have a run on my second monitor) it was working OK. The last two days, I can't set both monitors. I double click on a clip in the project, and it is not displayed anywhere.

  My preference is to set the workspace to imitate CS5.5, but this option is sorting is no longer the problem.  I'm trying to go back to the previous workspace and it tells me that there is not.  I tried control boxes and uncheck the menu window. Any help would be appreciated.

  

  Source monitor can normally be added to any 'panel' by clicking on the Panel, then in the menu dropdown you show, by clicking on the Source monitor... then navigate to it by selecting the tab is in the Panel that was highlighted when you clicked.

  You can change the panels by "entering" a title as source or scopes or whatnot too and drag in or to another palette, with the possibility of having always appear (for example, if you then release in the area left highlighted a Panel, you drag in) to the left of other things in the control panel... or if you say leave in the Middle then it displays when you select the tab at the top of the Panel. Others cover it when you click on the tabs. I think that the help pages following (they aren't long) could you get:

  Use and customize workspaces in Premiere Pro

  Working with panels in Premiere Pro

  Using the Source program monitor in Premiere Pro

  Things have changed a lot since 5.5...

  Neil

• iPhone app does not display the icon during installation

  Hello

  We have developed an iPhone application using flash builder. We used the following icons of the resolution.

  <>icon

  < image29x29 > assets/images/x_29px.png < / image29x29 >

  < image57x57 > assets/images/x_57px.png < / image57x57 >

  < image72x72 > assets/images/x_72px.png < / image72x72 >

  < image114x114 > assets/images/x_114px.png < / image114x114 >

  < image128x128 > assets/images/x_128px.png < / image128x128 >

  < image512x512 > assets/images/x_512x512.png < / image512x512 >

  < / icon >

  The icon appears correctly in iTunes and also icon in the device after installation. but the problem is during the installation of the application in the device, it is show Virgin icon.

  The app is only specific to iPhone devices. for example,.

  < iPhone >

  < InfoAdditions >

  <! [CDATA]

  < key > UIDeviceFamily < / key >

  < table >

  < string > 1 < / string >

  < / array >

  []] >

  < / InfoAdditions >

  < requestedDisplayResolution > top < / requestedDisplayResolution >

  < / iPhone >

  Please help me how to display the icon during the installation of the specific application of the iPhone.

  Hello

  The icon is not displayed during the installation of the application of the ad hoc package. Now, we have published (same code game) app in the Apple iStore and no problem icon with the distributed version (the application that's iStore).

  Thank you

  Chandrashekarreddy Muthumula

• Why 42 Firefox does not display the source page

  When I choose to view the Source of the Page I get a message 'document has expired. It happened not in previous versions.

  Ah! view_source. Tab set to true. I put it to false, and the world returns to normal!

• I have an error message of "can not question the source linux machine" when you do a P2V of a linux machine

  Hello

  I'm doing a P2V of a linux machine, but I get this error message.

  The system where you are running the Converter vCenter has active UAC? Have you tried to use the option "Run As Administrator" at the launch of the vCenter Converter? Have a look here for additional troubleshooting steps: VMware KB: when you do a conversion of Linux you receive the error: could not query the live source Linux computer

• Composite video is not showing is not on the Source and program monitors

  Update Premiere Pro CC 2014 to v8.1 on my Mac Pro running OS X 10.9.5

  When the conversion and loading of a project that worked very well in the last version of first Pro CC 2014, the source and program monitors refuse to display video.  Why? It's terribly frustrating!

  Information on Mac:

  Mac Pro - 2 x 2.4 Quad-Core

  24 GB RAM

  2 x ATI Radeon HD 5770

  Mark thank you for answering my question.

  I ended up having to create a new project, select the the CPU processing, the old CPU project and Recheck in my preferences to import.  Unfortunately this update cost me 2 hours of time to fix as well for me and my client. Not impressed.

• Audio Please HELP - not in the Source window

  When I import a clip to PP CS6, it will only video, not audio. I can't drag the audio of the film because it does not exist in the source window. The film works well (with audio video) in any player that I tried, so the problem is not the movie.

  Here is the complete information on archive:

  Please, if you know what to do, help me, I tried this medication, I have found no solution on the web. I tried to solve this problem for the last 3 days.

  How can I transcode the clip? in a convhierter of codec? I have serached in the web, but ts kind of softwrea I think that does not exist. I'm new to editing of media, I have buyed the first pro only about 3 weeks. so, back to the question, how can I transcode codec in the clip?

  Thanks in advance, Rasputin.

• I can't uninstall Silverlight 1 (1.0.30109.0) because the system can not find the source. How can I get it so I can install version 4?

  We strive to produce a report required by the State of California, which requires us to download Silverlight 4. The error message says you need to uninstall all previous versions of Silverlight, which there is one on the system: 1 of Silverlight (1.0.30109.0). The last update 29/01/11 at 12:38, an automatic update. When I go into "Control Panel" "Add/Remove Programs" find Microsoft Silverlight 1 and hit 'Delete' another error message tells me that it cannot find the source. I did a search on the hard drive and it came with c:/229fe816f9d5ed50e95460. I can access this file or delete it. How can I get Silverlight 1 out of this machine if I install Silverlight 4?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro audience on the Silverlight forums. Please post your question in the below link:
  http://forums.Silverlight.NET/forums/13.aspx

  I hope this helps.

• Why not start the Web Platform Installer on my pc?

  Someone has an answer for me?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the Web platform installer forum. Please post your question in the below link: http://forums.iis.net/1155.aspx

• &lt; br &gt; tag in live code, but not in the source code

  I'm having a problem with my form such that there is a huge gap between my section break and my table below.  The source code to this article looks like this:

  < div class = "right" > < / div >

  < class li = "section_break" >

  < /li > < /ul >

  < name of the form 'Form' = >

  < table width = "470" id = "Orders" border = "0" >

  < tr align = "left" valign = "top" >

  < td > < class = "description" label for = "element_6" > size < / label >

  However, my direct code at the same location shows something in a different way:

  < div class = "right" > < / div >

  < /li > < class li = "section_break" >

  < /li > < /ul >

  < br > < br > < br > < br > < br > < br > < table width = "470" id = "Orders" border = "0" >

  < tbody > < tr align = "left" valign = "top" >

  < td > < class = "description" label for = "element_6" > size < / label >

  I've no idea how out the < br > tags and they have to go.  Any help is greatly appreciated. Thank you!

  In your original code, you have a lot of
  Tags in the meantime andtags that belong here (see below). Go through the code of the table and get rid of them, 5 in total I think. Also, you cannot nest a

  in one. You start with an opening
  and only close together at the end of the page. What sort and it will get a little better.

  
         

  
   
     

  
  
  

  Size             Select one             Small             Medium             Large             Extra Large XXL

  Design