image / photo not appearing is not in the source monitor or program

Similar Questions

• Could not get the Source monitor and program to display together

  Hi, I use Premiere Pro constantly for about 6 or 7 years and have never had problems with the monitors Source and program appearing side by side in my workspace.  I've recently updated to CC and, in addition to having one monitor 'fixed' and a sudden 'floating' (I've unable to paste the two up, but would have a run on my second monitor) it was working OK. The last two days, I can't set both monitors. I double click on a clip in the project, and it is not displayed anywhere.

  My preference is to set the workspace to imitate CS5.5, but this option is sorting is no longer the problem.  I'm trying to go back to the previous workspace and it tells me that there is not.  I tried control boxes and uncheck the menu window. Any help would be appreciated.

  

  Source monitor can normally be added to any 'panel' by clicking on the Panel, then in the menu dropdown you show, by clicking on the Source monitor... then navigate to it by selecting the tab is in the Panel that was highlighted when you clicked.

  You can change the panels by "entering" a title as source or scopes or whatnot too and drag in or to another palette, with the possibility of having always appear (for example, if you then release in the area left highlighted a Panel, you drag in) to the left of other things in the control panel... or if you say leave in the Middle then it displays when you select the tab at the top of the Panel. Others cover it when you click on the tabs. I think that the help pages following (they aren't long) could you get:

  Use and customize workspaces in Premiere Pro

  Working with panels in Premiere Pro

  Using the Source program monitor in Premiere Pro

  Things have changed a lot since 5.5...

  Neil

• Different sizes of resolution between the Source monitor and program monitor

  Hi guys!

  Newbie here-sorry in advance. The size of resolution replaces my source monitor monitor of the program to the point where its very large in the program monitor and the image stays that way when exporting... What I am doing wrong?

  If all the clips are from the same camera, you make a new sequence that is correct, then put all your clips in it and change. You are simply based on this first clip sequence settings to lay the foundations for your project.

  If you have snippets of a few different types, such as 1080 p and 720 p, then you must decide on a workflow that suits your needs. If the final result must be distributed to 1080 p, you high-end 720 p content, but end result must be 720 p, better off to reduce the content in 1080 p. It depends on different factors.

  Thank you

  Jeff

• 2015.0.2 question of image distorted in the source monitor and program when I double click on a clip

  When I press play it continues normally but every clip I click the image looks like this... On OS X El Capitan 10.11 and 2015.0.2 first

  

  Known issue with El Capitan.

  Disable the MPE material in project settings for now.

• Why the source monitor and program goes black when you try to apply the lumetri effect in cc first Pro 2015

  Whenever I do any type of adjustment in the effect of lumetri, monitors go black

  Hi Jerry,

  You have a structure of AVCHD (MTS) files folder?

  Please try the steps below.

  Close Premiere Pro.

  Go to the Documents folder and folder rename Adobe at old_Adobe.

  Then click on Start button, type %appdata%\microsoft\windows\sendto in the box find and open the folder Roaming Roaming > Adobe rename the folder of Premiere Pro. Plese don't delete any folder just a change of name.

  Roaming > Adobe, open the common folder and delete all files in the media Cache folder and media Cache files.

  Launch of Premiere Pro, then try to apply the LUT.

  Vinay

• When I stop playing, the source monitor goes black. It does not show a still image after pausing.

  I just got a HP Prodesktop 400 G1 MT, Intel core I7 processor. In first 8 adobe, when I stop the video playback, the source monitor and program monitor won't give me a fixed image. As soon as the video is stopped, the screen is empty while normally, they would be in a freeze frame. the computer has an AMD radeon graphics card. I have two pc for dual monitors. I tried to play with the settings of reading to the premier, but no luck. I'm about to take the computer to be recovered. Any suggestions?

  Hello! Thank you for responding. I'm currently doing an update for my AMD display driver, and it is up to date. I called tech support and they helped me in the question of fixing from the option menu file - rendered video - general - project settings and playback - selecting mercury playback engine software only option. My computer was set to the GPU acceleration engine. It works fine now. Thanks.Aldo

• Source monitor and program monitor not video playback

  The last time I used the first Pro CC has 8 Oct and the program worked fine. As of today, I have opened the project file and the source monitor and program is nothing display respectively. However, the audio playback for both are not affected. I tried to do a completely new project with different video and I get the same error. I restarted the first, restarted the computer and reinstalled first. No help. :/

  First CC Version: 8.1.0

  Computer information:

  Model name: Mac Pro

  Model identifier: MacPro5, 1

  Processor name: Intel Quad - Core Xeon

  Processor speed: 2.4 GHz

  Number of processors: 2

  Total number of cores: 8

  (By heart) L2 Cache: 256 KB

  L3 Cache (per CPU): 12 MB

  Memory: 16 GB

  Graphics ATI Radeon HD 5770 1024 MB

  Processor speed of interconnection: 5.86 GT/s

  Boot ROM version: MP51.007F.B03

  Version of the SCM (System): 1.39f11

  Version of the SMC (processor board): 1.39f11

  Serial number (System): H00470SREUH

  Serial number (processor board): J504301VJBH8B

  Material UUID: 4D6175EA-3353-5E84-BCA0-42A013A69BED

  Hello

  Please go to file > Project Settings > General and change the video rendering to the GPU acceleration software only provider and see if that helps.

  Thank you

  Regalo

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Why does my audio play in the source monitor, but not in the timeline?

  I imported some MOV files in first 2015 (codec H.264, PCM Linear, timecode).  The audio plays fine in the source window, but when I drag the clip to the timeline, no audio file appears under it and there is no sound.  I followed the instructions on this link, nothing helps: no sound during playback in Adobe Premiere Pro.

  These clips were filmed on a GH4.  I was shooting 1080 24 fps.  Before this problem I was shooting on a Canon 5 d.  Is it possible that it is the codec?

  Video playback in the timeline panel is also trolling and jittering a bit, but normally play in the source monitor.

  If anyone can help, please excessively it because I am not very fluent in the first.  Thank you.

  Source patch http://forums.adobe.com/thread/1442800?tstart=0 can help

• can not see the wave forms when dragging clips in the source monitor

  I'm editing interviews where images and the original sound has been grouped in merged clips or sequences. I love the source monitor editing in the timeline, so I drag the sequence in the monitor source from the location of the project. From there, I can see and hear the movie without problem. However, when I mark the starting points and insert the images into a new sequence (my own assembly), there is none of the waveforms. In the source monitor itself, if I change the Audio waveform display, there seems to be none of the waveforms here either. Its strange, because first of all, I can hear the audio, and secondly, if I open the original sequence in the timeline panel by double-clicking it, instead of in the source monitor, dragging in there, then I can see the audio waveforms very well... Sounds strange... that the program if not just showing the waveforms for sequences if they are in the source monitor?

  Any ideas would be a massive help.

  (this is CC, 2014, with the Canon 5 d footage and Wav audio files recorded separately)

  Thank you!

  Thank you all for your advice.

  I really discovered what seems to be the cause of the problem. In the sequence, there is a blank audio track for a reason any. When I delete the sequence and then drag this sequence in the source monitor, BEHOLD, I still see forms audio waveform. No idea why it shows one track empty when it IS... Weird.

• Mysterious < br > tag in live code, and not in the source code

  I have a problem here, as mentioned above, with ma page Web.  When you go to this link:

  www.tsohngyun.com

  you will find a space perfectly size between menu horizontal blue and red background that lines on two images (image of the handshake, 'Welcome to the Master Insurance Agency' image).  When I look at to inspect the Web site in Dreamweaver in live code, I noticed a < br > tag sitting just before the tag of table containing the red background.  However, when I go back to the source code, the < br > tag is not found by the opening table tag.

  How can I change something that is not in the source code?  I want to get rid of this gap! Help, please!

  And this
  tag does not exist in the source code of your Dreamweaver? Really?  Because it is based on what I see in your code, you
  Tags on line 31, line 35, line 42, line 45 and 49 of your code line.

  Dreamweaver in code and design split view and see if you can spot the
  tags in your code (can even use useful tool to search and replace in Dreamweaver to find each istance of the)
  tag in your code.) Now, not all of the
  the tags are innapropriate so don't remove them just good willy nilly.

  In any case, hope this helps.

• After the installation of 6.0 KB948465 - X 64 .exe it does not correct the graphic titles and programs on the taskbar

  Downloaded this update KB (above) - not IS NOT CORRECT THE GRAPHICS AND BLURS PROGRAM TITLES ON TASK BAR... VIRUS? PLEASE HELP ME!

  You have another question in these Forums about this;

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/60-KB948465-x64exe-prefer-not-IE-9-force-fed/022efdba-4F65-4e7c-9fff-f4b19f91b85d

  The Service Pack is not designed to solve your graphics.

  Access the site on your computer or the manufacturer of the graphics card > drivers download Section > then key in your computer or a model number graphic card > find your operating system > find two graphics / video or the drivers of the Chipset and download and install.

  See you soon.

• Did not find the main: PluraRunner. Program ends.

  Hello..

  I use Windows 7 (64-bit). The problem is that I have a prompt with the error "did not find the main: PluraRunner.» Program will exit. "Here's a screenshot of the error:

  

  -By clicking on OK the prompt again in about 20 seconds. It never stops.

  I tried:

  -Restart and re-login
  -Uninstall and reinstall Java
  -Remove any redundant Java installation. So for the moment I only have a single installation of Java on my machine.
  -Defining the path and Classpath variables

  Whenever the prompt, I see files two following jar in the temporary location:

  

  If I click OK to the prompt and delete these files, they are re-created in the same place when the guest returns.

  Please me before I lose my sanity on this stupid problem!

  -Mitesh

  Solved!

  I was able to resolve the problem by disabling one of the start-up services in msconfig:

  

  Some people may find the same as that in their list of others, but the key has been one of the start-up services which kept causing the error message. I even rebooted my machine and made sure that the error does not return.

• Transmit mercury only shows the program, not the source monitor monitor

  Hello people,

  For some time now, I have this problem where only the signal from the program monitor is sent to my external monitor. The source monitor working within first on my computer monitors, but will not playback on my external monitor. It is in each project unique im working on and I find it very difficult to identify the problem. It won't work when I drag a clip from a location to the source monitor or make a match frame of the timeline. I would add also that sometimes, but not everytime, when the program monitor transmits very well and I do a double click on a clip in the tray or drag it to the source monitor, my external monitor goes black. This also happens when you do a correspondence framework. And to add another weird thing, the audio is being transmitted by the source monitor. First pro audio is routed through my external monitor. I can just hear end during playback of clips in the source monitor. It's just the video that will not be displayed on my screen.

  
  

  My hardware is just simple Quicktime mov with ProRes in them in 1920 x 1080 so nothing special.

  I have the latest version of first and my driver for the monitor of Blackmagic Mini is also updated.

  I'm open to suggestions!

  Thank you!

  I think I solved my problem.  After a lot of troubleshooting, we ransacked the Premiere Pro preferences (hold down shift + option while launching the first) and the source has been restored.  Or my preferences were corrupt, or else my system has been set up in the reading panels and Audio hardware preferences.

  Unfortunately, after a few days the reading of the source monitor went out again.  I trashed my preferences again and reading has been restored.  I'm still trying to understand why this has happened.

  To answer your questions.  I am using a monitor.  He has worked with AJA Kona, but we recently went to Blackmagic so that we can use to Resolve.  I do not know if yes or no the Blackmagic was initially working right, but I don't think it was.  I got stuck on a large project, it was a few months before I could make a test or troubleshooting.

  I hope this helps!