Disk on CD Satellite 4030

Hello.

What is the maximum capacity of a hard disk capable of managing with Satellite 4030 CD?

Is it possible to put a Combo (cd-rw/dvd-rom) on a CD Satellite 4030?

Thank you

PS: Sorry the bad English.

Hello

It is not easy to find info on the maximum capacity of the HARD drive that can be used with your device. These types of information have partner or different HARD drive supplier. Check on the net if you can find some of them in your country.

I no a lot of experience with the older models, but in my opinion, your device is not powerful enough to deal with player combo that you exchange (only 300 MHz).

Good bye

Tags: Toshiba

Similar Questions

  • External monitor satellite 4030 CDT

    Hi Please help
    I have a Satellite 4030 CDT running windows 98 with a trident cyber9525DVD W98 driver/video card (22) PCI/AGP.
    I bought a LCD TV and I would like to use it as an external monitor.
    When I use the Fn + F5 to switch I do not get a signal on the external screen, but when in display properties and I only check the box marked "extend my desktop to this monitor", I get a signal. I checked the check box selected in the view tab, in the hardware toshiba put in place. But I would use it as a main monitor and I cannot get it to work in the simultaneous mode.

    Hello

    As far as I know it of not possible to use the external monitor as a primary monitor.
    You can change the monitor settings, tv, display clone and extended desktop.

    Good bye

  • DVD Rom in a Satellite 4030 CD drive?

    I have an old Toshiba Satellite 4030 CD. I would like to know if I am able to install a dvd rom drive in this laptop. If so what models would take on this machine.

    Thank you

    PB

    Hi Breck,

    in my opinion there is no way to upgrade the internal CD on a DVD player because the CD player is set up and could only be replaced with the same model!

    Only an external USB or PCMCIA solution would fit!

    Sorry!

    Rudi

  • Satellite 4030 has much too much memory embedded - 66 MB not 64 MB

    Hi all

    I have a 2nd Satellite 4030 user who has far too much memory shipped! [66 MB not 64 mb]
    The maximum allowed to my machine is Total = 312 mb.

    I added a 256 MB stick in slot 1 memory to the supposed 64 MB on board & it does not start.
    I put back the original 128 MB & started stick & apparently, I have 66 MB of RAM?

    Adding to this 66 MB 256 = 314 MB! 2Mbmb more than max allowed.
    I tried 2 different sticks of 256 of ram to my other laptop Toshiba & still no boot [prove it is the amount of ram?]

    Am or work around for this I stuck running on only 192 MB?

    Help K Morton

    Hello Morton

    This is a very stupid situation. That I can see, nobody has written anything in the last 3 days and to be honest, it is not easy to say why this happens.

    I don't really have experience with these cases, but maybe you can try to update BIOS. Check Toshiba support page and try to update BIOS. Maybe BIOS values will be refreshed, and after that the memory will be displayed as it should be.

  • I'm looking for a driver for Satellite 4030 CDT CD

    I'm sorry for my English, but I'm looking for a satellite 4030 CDT rescue cd, I need to format my laptop, but I don't have the driver CD, where can I look for it?
    Thank you so much everyone
    Fabri
    p.s. or someone can share me this cd?

    [Edited by: admin January 22 06 09:13]

    Hello

    You can find the drivers here
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    Good bye

  • Merging 2 partitions on a hard disk again on Satellite X 200-21 L

    Ok
    my situation: I bought the Satellite X 200-21 L (European version of the X 205-SLi3) on this point, I have two hard drives with a capacity of 160 GB per disk.
    But among the hard disks is divided into two partitions, the partition "C:" for progra0ms and vista and partition "F:" for what you want.
    The second hard drive D: is normal without a split (160GB).
    But now, my score of the first hardrive (where is saved the programms and viste) is full. Therefore, I want to know, if possible, to unite the two bulkheads again!

    -is it possible?
    -can which program I use? Vista its own program to do this?
    -I only have a recovery CD... so I don't want to lose my data! the hidden for the automatic system recovery partition could be damaged?
    -is only possible to run such a program, which protect my data and unite those partitions without losing something?

    My hard drives:

    File data-system: NTFS
    Hardrive-Capacity: 160 GB (two of them, one is divided into two partitions))
    size: 2.5 Zoll
    Rotation speed: 5400U/min
    Cache memory: 8 MB
    average access time: 11 ms
    port (internal): IDE 40Pin (Ultra DMA/ATA-66)
    MTBF: 600000 hours
    Engine technology: dynamic fluid bearing / RoHS compliant

    THX!

    As far as I know that something like this is possible. You can do the following:

    1. remove all data of D on the second HARD drive
    2. open Computer Management > disk management
    3. click with the right button of the mouse on the D partition, and then choose the option Remove Volume
    4. click with the right button of the mouse on the C partition and select Extend Volume option
    5. simply follow the menu on the screen

    All that s!

  • How can I access the hard disk in a satellite A30?

    I just bought a new hard drive and were surprised by the lack of information on the internet with the help to access the hard disk. Help, please. I have the satellite a30-203. Thank you, Daniel Short

    Hello Daniel,.
    location of the HARD drive is down just under the CD-RW/DVD device.

  • Waste of space on the hard disk on the Satellite C650 - 15 X

    Hello

    I found a problem on my laptop Toshiba Satellite C650-15 X (almost new), I bought several months ago. It has a drive hard 500 GB volume in 2 partitions: C and D-with 250 GB each; and Windows 7 Premium 64-bit operating system.

    There is something strange about the partition D: it is 225 GB of missing! After scoring all of the files in the partition D > properties, there are only 25 GB in use and really little or no free space! There isn't any system or other files with this 25 GB. More than 220 GB in partition D is simply disappeared.

    C partition looks normal. Tried all known Windows tools: check disk, defragmentation, convenience stores, etc. without results. Any suggestion or idea what s happened past and how to fix it? Thanks in advance!

    Can you please open Computer Management > disk management. Make a screenshot and post it here.
    I would like to see exact HDD structure.

  • Fitness by using disk recovery on Satellite M70-169

    Hello

    I have a Satellite M70-169.

    According to me, I have messed around a bit with software such as cleaners of register etc. and want to make a new start.

    Exactly how, step by step, using the recovery disk came with the laptop?

    It will reinstall all that originally shipped with the laptop?

    Any help is greatly appreciated!

    Pesche

    Hello Pesche

    Instructions how to install Os using supplied recovery media, you can find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2513&tstart=15

    I recommend to use the Expert installation mode and create a clean partition. When the computer starts for the first time you will be able to see the C partition only. The D partition must be created also in the OS, but is really not a problem.

    Exact explanation which you will find under:

    http://www.theeldergeek.com/hard_drives_07.htm - create an extended Partition (step
    http://www.theeldergeek.com/hard_drives_08.htm - create logical drives in an extended Partition. (Step 2)

    If you have any other questions, please write again.

    Bye and good luck!

  • Disk failure hard satellite L650-12N - replaced with SSD - how to recover?

    My HARD drive has failed, so I bought a 256 GB SSD Crucial CT256MX100SSD1. I installed it in the laptop and went to use the recovery CD. It's the bit score correctly as far as I can tell, but to cut a long story short, I think that the recovery disk is missing a few vital pieces of information (read below - I may be wrong).

    So, how do for Satellite L650-12N new recovery discs?

    Thank you
    RQ

    After the partition, it then says "copy files of database recovery.
    some random jargon

    Then he said: «unpack the OS and system/WinRE»
    Set of RECO...
    It says "copy F:\ZZImg\11353XSP.swm to V:\HDDRecovery\SWImg 1/10
    1 file (s) copied.
    Copy of the CRC files
    1 file (s) copied.
    Copy F:\ZZImg\11353XSP2.swm to V:\HDDRecovery\SWImg 2/10
    1 file (s) copied.
    Copy of F:\ZZImg\11353XSP3.swm to V:\HDDRecovery\SWImg 3/10
    1 file (s) copied.
    Copy of F:\ZZImg\11353XSP4.swm to V:\HDDRecovery\SWImg 4/10
    1 file (s) copied.
    Copy of F:\ZZImg\11353XSP5.swm V:\HDDRecovery\SWImg 5/10
    1 file (s) copied. »

    at this stage it says ' insert the next recovery media (containing the F:\ZZImg\11353XSP6.swm file)!
    but the backup I did only has one drive.

    Hmm, for me, it seems that some image packages are missing.
    According to your message, the recovery image must contain 10 packs, but the first recovery disc provides only 5 packages.
    Should be so 2nd drive providing other packages to complete the recovery procedure.

    I m wondering if you already used the recovery disc (CD) in the past.
    Are you sure that this recovery disc has been done correctly 100%?

    From my point of few recovery disk is defective and to recover the laptop, you need a good way to return to work.
    Usually this can be ordered here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Question about the new disk on the Satellite A100 (PSAA9)

    Hello!

    To extend time to work on the battery to make hard disk access faster and to extend the disk space, I upgrade my hard drive.
    I found this beautiful disc:

    Link:
    [http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=Momentus_7200.2_SATA_3.0Gb/s_160-GB_Laptop_Hard_Drive&vgnextoid=546207c8108dd010Vgn VCM100000dd04090aRCRD & vgnextchannel = c021a47948a3d0 10VgnVCM100000dd04090aRCRD & reqPage = model]

    This hard drive is compatible with my Toshiba Satellite A series and you have a better solution please respone?

    Love, peace,
    Vasja.

    The HARD drive is very nice.
    The A100 PSAA9 series supports SATA 2.5 hard drives.
    The 160 GB should also be compatible because some units of the A100 series were already equipped with 160 GB hard drives.

    I think it s a HARD drive supported.

  • Creation of recovery disks on a Satellite Pro L300 running XP pro

    Hello

    you want to create a recovery disc for my Satellite Pro L300. Operating manual provides instructions for Vista but the machine comes with XP Pro.

    Can anyone help?

    Can you please send the exact model number? I just want to check the specification.

    Anyway, as far as I know this model was supplied with preinstalled VISTA 32 bit BUSINESS and WXP recovery DVD. You always have this DVD?

    I m not 100% sure, but I think that WXP had no option for recovery disk creator. The whole story started with Vista.

  • Cannot restore the disk on my Satellite L650 - 18 M

    Satellite L650 frozen at startup upward. Despite the cost of mc, a virus stopped starting upwards. Stops up to blinking cursor left. can boot from the recovery cd. BUT the restoration / used to complete recovery to any selected restore point if she goes through all the motions and then says at the end, fails with the error.

    No recovery disc option hard toshiba (IE to factory settings) is available in the console and recovery with the recovery disk.
    Drive D contains all data recovery ok I can move aroud go c > prompt back to alldrives / areas. Have own burned recovery disks. It happened quickly.

    NOW installed win 7 (64-bit) in the frustration of 'a' disc, works but all installed s/wareand drivers toshiba now useless. Bottom line there at - it a patch to install or a work around that allows access to reset the factory settings with the data stored on the disk/drive Normal D. methods of starting this process are not available

    Can you please tell us what error was shown at the end of the installation of recovery?

    In any case, now after installation of operating system with a non-Toshiba drive has no way start HDD recovery Setup again and the recovery image can be installed with Toshiba recovery DVD only.

    > NOW installed win 7 (64-bit) in the frustration of 'a' disc, works but all installed s/wareand drivers toshiba now useless
    To be honest, your ad is a bit confused and I n t understand what you mean with this sentence. If you have own OS you install all drivers and all the Toshiba stuff also. All are available on the Toshiba download page.

    If you have any other questions please be clear and ask a so it will be easier to respond to each of them.

  • Update disk on the Satellite 4030CDT

    Hello!

    First "Sorry!" for asking such a stupid question.

    I've Googled, manuals, forums, eBay... but nowhere find an answer exactly. I have an old laptop Satellite 4030CDT. I want to change the old 4, 3 GB of hard drive for a bigger to use it as an MP3 player and musicvideo in my bathroom.

    Can what type of hard drive (space) I use? Is it possible to use a higher than 40 GB HDD? The latest version of the BIOS is installed but I have found no info on higher disk space. Hope someone could help me.
    Thank you and greetings from the Germany
    Micha

    Hello Mich

    Unfortunately, I wasn't able to find much info on this old laptop model. According to some info on the net this laptop was designed in 1999 and you must understand that there is not much info on these books.

    I don't really know what is the capacity of HARD drive max, that you can use, but if you need it for music I think only 20 or maybe 30 GB should be enough and I hope that the full capacity will be recognized correctly.

    20 GB hard drives are more expensive and you can get n eBay for little money. Buy one and test it with your good old classic.

    Bye and good luck!

  • Care about disk HARD of Satellite 4030CDT

    Hello

    I own a laptop Satellite 4030CDT. It runs under Windows 98 SE.

    I would like to upgrade its default disk (4 or 6 GB, I don't know now) to something bigger, so I can install Linux next to the existing Windows partition.

    Can anyone here give me the specs should I look for in a new drive? Thermal or limitation of power, I should look for?
    All versions of the BIOS should I put up-to-date? (one of my friends said that if the BIOS is old enough (this computer was purchased around 1999) then it does not take in charge the larger disks).

    The two changes I've done with it so far are:
    1 update the BIOS to the latest version from last year, to make it possible from the CD.
    2 installed 128 MB of additional memory, so now he has 192Mo (as I understand is the maximum possible).

    Thank you

    -Amos

    Hi Amos

    You are right on the RAM. For this unit 192 MB of RAM is max.

    As much as I know there is not any specification of maximum size of HARD drive that can be used for this device. This kind of solutions providers HDD are competent. Please take a few information on the net and you will find specific information on this subject.

    I found on this HARD disk a single seller in my country has 20 GB and 30 GB HARD drive for this model of laptop.

Maybe you are looking for

  • How can I open e-mail messages on the screen rather than behind Foxfire?

    When I opened an e-mail earlier, he'd jump upward in front of Foxfire. He is now behind Foxfire. I have to minimize Foxfire to read e-mail. It's now how it worked. I don't know how she has changed. And I want to reset it. I don't know how to solve th

  • SQL Server, get the event ID 10016 hourly

    Hi guys,. We get the error message below on our SQL with OS WS2012 server every hour. "The application-specific permission settings do not grant permission to local Activation for the application server COM with the CLSID. {FDC3723D-1588-4BA3-92D4-42

  • initialize the shift register

    Hello How to initialize the shift register (inside the second loop for) so that it starts from 0 whenever the program runs. I tried to attach a constant 0 in left shift register, but which resets the registry whenever it passes through the inner loop

  • Error with the received Fax

    We have a new laser jet 400 MFP all-in-one at our reception and have been very happy with it, except for a problem that we have at all times.  When we receive a fax it will recognize it and receiver say page 1, and then he began to compose the 102 an

  • Access denied to the program - Windows 7

    I installed a program that worked on Windows 7 before and he was met by security and everything. Now, whenever I try to open it, the computer refuse me access to use the program. I tried to reinstall the program, temporarily disabled the user access