disk recovery or usb after an upgrade

Similar Questions

• Win 7: can I start Win 7 from USB after having upgraded to Win 8?

  Hello

  I am currently facing up my Win 7 OS using a USB hard drive.

  Say if I upgrade Win 7 to win 8 to my main OS C drive, can I have a dual operating system by choosing to start sometimes since my last Win 7 on the USB drive?

  Thank you

  Low

  Unfortunately, no, you can do that. Windows 7 must be installed on a device of storage attached internally.

  You could do a dual boot:

  http://techingiteasy.WordPress.com/2012/03/05/How-to-dual-boot-Windows-Vista7-and-Windows-8/

• Envy TouchSmart d030xt 20: HP Recovery Manager blocked after upgrade Windows 10

  Yesterday, after the upgrade my computer to Windows Recovery Manager 10 is now blocked. It wasn't like this until I upgraded. I have a feeling that the operating system may have changed my security settings. (For example, when I try to change something in my pictures folder, UAC pops up) Anyone know how can I get Win10 to unlock Recovery Manager?

  OK, I found a solution. This is the certificate.

  What you need to do is:
  
  1. open 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' in the file Explorer.

  2. right click on Rebecca.exe (recovery program) and click "copy."

  3. paste it on your desktop.

  4 unzip this download http://www.fluxbytes.com/software-releases/fileunsigner-v1-0/

  5. drag your copied version of Rebecca.exe on FileUnsigner.exe

  6. right click on Rebecca.exe on the desktop and click "copy."

  7. paste in 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' and say yes to replace the existing file.

  8. search "HP Recovery Manager", click on it and a prompt will come, click 'Yes' and it should open.

  You can repeat this for other programs that are blocked. Basically, it removes the obsolete certificate which prevents opening in Windows 10.

• Is the drive to upgrade Vista from Toshiba, a recovery disk or a normal CD to upgrade to Vista?

  Hello

  My status has now left COA validated for valid POP so I was wondering how much longer it would take to shipping. Anyone received the disc or know if there is a disk recovery or upgrade disc.

  They would probably have to lock it to Toshiba computers only? Exactly how does it work?

  If anyone knows it please post :)

  Thank you
  Stephen

  You're in luck. I put mine in early December, has called once, sent the POP e-mail twice and he says AGAIN as "COA validated." Apparently, they begin to send now (at least in Germany) so as soon as you get to know everyone here :)!

• New HP HARD drive > load recovery disks > fails to start after the installation process on the press continue

  I have Pavilion d7-4165dx laptop. I saw US, that made a purchase of the United States (BestBuy).

  -HARD drive failed after renewal of antivirus software trial period.

  -All diagnoses would not recognize the HARD drive.

  -Support HP said still in warranty, but I am out of country.  HP said more was likely HARD drive cable.

  -Buy cables and a hand off USA door.

  -Installed, always the same answer.

  -Ordered the new HP's HARD drive.  Out of stock.  Finally inquiring was commissioned to a part 3rd US rep.  He recommended to buy directly from output, but higher speed.  Did this and then HP replacement HARD drive arrives.  Both outside the U.S. door hand.

  -Install the fastest (slightly smaller) Seagate 500G 7200.  Has started the recovery with discs of recovery (5 in total who received from BestBuy, but not the OEM to the research), but before the new HARD drive is smaller than the original WD 640 G 5400.   Put WD #1 Bay and Seagate in #2.

  -Start the process of disk recovery.  Any resumption of the process of the plant and on the last drive-through, it says do not touch while the PC starts on and outside, etc.  Said so press on continue continue.

  -When the press continue, simply goes to the black screen with "No boot device...". »

  -Run the other options, the same message.

  -Diagnosis of ran.  Drive HARD everything is OK.

  -Called HP support.  It says I have to buy the HP recovery discs.  Those I have (5) is not the right one, there should be only 3!  They are that I got from BestBuy, but look like they were made here when BestBuy configures the PC.

  Suggestions anyone?

  Someone has found the problem for me today...

  "Put WD #1 Bay and Seagate in #2.

  When the directions say eliminates any external devices... it really means remove all devices that can be removed that were added after you bought the computer... including in-house!

• Drivers for USB audio devices do not detect my Casio keybaord (piano) after the upgrade to Intel core i5

  I have windows XP with SP2.

  Device drivers audio USB is unable to detect my Casio keybaord (piano) after the upgrade to Intel core i5. Usually, when I connect my keyboard via USB, the drivers used to get automatically installed. But now he is unable to install the drivers and still shows the yellow "?" symbol. I tried everything but nothing seems to work. Someone please help. :-(

  If you update your motherboard, you must install the drivers available from your mobo site and not from winupdate

• put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them

  put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them help

  Hello

  Read the results of a problem similar to yours at this link Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/restore-backup-after-clean-installation/2b443d83-BFE9-4601-A055-a10e7ec7e183

  See you soon.

• Can I delete my recovery for WIN7 partition after the upgrade

  Can I delete my recovery for WIN7 partition after the upgrade.

  What can I INSTALL CLEAN so I want

  What should I do when I need to reinstall Windows 10?

  The upgrade is a download of ISO or just installed on WIN7?

  The application upgrade says to reserve my copy so I did but I never got confirmation of this email?

  July 29, 2015.

  How to get the Windows 10 free upgrade

  J W Stuart: http://www.pagestart.com

• Make the recovery with USB disks

  I have a HP Pavilion older m9300t Intel Core 2 Quad Q9300 2.50 GHz 4 GB 500 GB. HP told me that they no longer have the recovery discs available.  I bought a refurbished with no disk system.  The hard drive eventually crushed and I decided to keep the computer as it is beyond my needs.  I want to recover my software. I read that you can make the recovery disks with a USB key. It will work in safe mode? And we know if it's a system of 64 or 32-bit?

  If the disk hard th is crushed, then the recovery partition will be unreliable.

  Follow the instructions on the web HP to the address following document to find out how to order a set of recovery disks. Maybe it's a bit difficult because the desktop PC is three generations behind the current operating system.  Is there a certificate of Windows of authenticity with an activatinkey of license of twenty-five characters on the case somewhere?

  http://support.HP.com/us-en/document/bph07143

• Satellite P100 - recovery disk no longer works after you start

  Hi, I tried to use the disk recovery toshiba last night and it did not work. He worked twice before.

  The laptop starts with the cd drive and says it's loading ramdisk Image. It then loads the image and request that if I want to add a SCSI controller, before I can say anything he says 'Please wait', and then restarts the computer and re-trys the previous steps.

  A that someone has experienced this problem? Can anyone offer advice?

  I hope someone can help

  Ben

  Hi Ben

  Sorry, but I'm a little confused. You wrote about Microsoft CD or DVD recovery facilities you have with your laptop?

  I ask this question because, as far as I know, by its use of origin designed Toshiba recovery image the user should not get much just recovery procedure without adding any controllers or similar stuff.

• Satellite L850 - how to replace a HARD disk recovery partition?

  Hello.

  Toshiba laptop Satellite L850. PSKDGA-02Y012. The original HARD drive has failed in his colleagues even mobile, so we replaced the two HARD drive after you have created a recovery USB. When used to restore the operating system to original status of OOB.
  That has worked and portable runs much, but now I want to BACK the recovery partition (now only on the USB I think) for the new HARD drive.

  Simple to shrink the disk HARD C: (partition 2) on the HARD disk, but then how to transfer twhats on the USB (USB recovery stick) back on the HARD drive?

  Thanks for any help.

  Karim...

  Hello karim

  When you buy the notebook you will get it with preinstalled operating system (recovery image). Original recovery image is saved on the HARD disk on the recovery partition.
  Each owner of the laptop has option to make the backup recovery image and create recovery media. It could be the DVD or USB support. You can do this by using preinstalled Toshiba recovery media creator tool.
  This tool will create bootable recovery media that can be used for the installation of original image recovery if there is problem with the installation of image disk HARD recovery or when the drive is defective and must be replaced.

  Where the HARD drive is faulty and should be replaced or the owner of the laptop to upgrade HARD drive, you can install original image created using recovery recovery media (USB). After installing recovery image, you will have the same situation as for the first boot after the purchase of the laptop. With other words notebook will have factory settings again.

  In this case original recovery image is already copied onto the new HARD drive and you will also be able to start the installation of HARD drive recovery. There is therefore no reason to copy a recovery on HARD drive media.
  Please note: installation of HARD drive recovery works with the factory only settings.

  If you have any other questions do not hesitate to ask.

  Good luck.

• How to roll back to vista after an upgrade to windows 7?

  How to roll back to vista after an upgrade to windows 7?

  New computers that come pre-installed with Windows 7 or Windows Vista often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  ------------------------------------

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  or

  Windows Vista download and reinstall

  Files Windows Vista Setup official (Digital River)

  Note these .iso files can be used with a Dell/no - product Dell OEM keys but the phone activation is required (see the note at the end). This key is usually located on the COA attached to the base of the system.

  Sale to the retail/upgrade product keys that can be used with these .iso files and activated by internet or by phone. See the note at the end for the activation of the phone.

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  Note: You can use the HP format tool to format your USB (run as administrator) after the windows install so you can use it as a USB again. ;)

• After that upgrade to El Capitan about this Mac does not work"

  After the upgrade to El Capitan by clicking on about this Mac, nothing happens and by double clicking on System profiler I get the error message from the Application "System information" cannot be opened.  I ran disk utility, tried in safe mode and as a guest and all user are the same.

  It is a late 2008 MacBook.  It's on 10.5.8.  I did a clean install of 10.6.3 with upgrades to 10.6.8 to give birth to El Capitan.  According to me, that he was working at that time.  Then, I migrated the user of a backup image of the 10.5.8 account. Who could have when it stopped, but I'm not sure.

  I had two newspapers @ pastbin.com/Mca6LS4H

  Hello mrtrytofixit,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to rely on public services provides your Mac and I want to help you get things working again. With troubleshooting, you have already done, it seems that it is a systemic problem.

  From there, what I recommend is reinstall OS X El Capitan using OS X Recovery on your Mac. It should not remove or erasure of your data, but it is recommended that you make backup before you do incase of an emergency.

  These articles will guide you through the backup and reinstallation:
  Use Time Machine to back up or restore your Mac
  How to reinstall OS X

  If you have any questions or concerns, inform the community. We are all here to help.
  Best regards.

• Major Outlook and timing of the problems after the upgrade of the El Capitan

  On the advice of the Apple support (phone call) I recently upgraded from Yosemite to El Capitan 10.11.6.

  I have many problems. The two largest are (1) stands (2016) Outlook and frequently "must be closed; (2) calendars quickly goes to "not responding" after the launch and shows multiple entries for a single event. Example: I have a class to repeat each week (when I was in Yosemite). Before the upgrade, he showed the event once a week. After the upgrade, it it shows 13452 times the same day. I followed the advice on these topics, but nothing has worked. Similarly the calendars on my iPhone5 freezes as well.

  Hello Steve,.

  Thank you for using communities Support from Apple. I have a problem with your MacBook Air use after update is not what you expect. Based on what you said, it seems you can experience some software related issues, and here's how I recommend refine you and resolve these issues:

  1. first of all, try to run a quick with the disk utility tool test, as this can correct simple problems that you encounter. Then restart normally and retest your problems.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test mode safe questions, then restart normally and test again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  3. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• How Firefox can remember after I upgraded to Windows 7 from Vista?

  I intend to have someone to do a clean install of windows7 on my HP laptop (which currently is running vista home premium) from the windows disks 7 provided by HP. My Favorites will be remembered when I reload Firefox?

  All of your personal information for Firefox (bookmarks, passwords, etc.) are stored on your hard drive.

  You must make a backup of your entire profile folder or some elements in your profile folder before installing Windows 7.

  1. Put the backup somewhere a course on another hard disk, CD or USB/pin/thumb/jump drive until after Windows 7 is installed, and Firefox is re-installed.
  2. Then, you can copy selected files in your profile folder under your Windows 7 Firefox installation.

  Some information is duplicated in the following articles, but try all read. If you plan carefully, you should lose any of your information.

  • See-> profiles-how to find your profile
  • You may need this: http://kb.mozillazine.org/Show_hidden_files_and_folders
  • See-> back up your information
  • See-> profile backup
  • See-> transfer of data to a new profile (this article is a list of suggested items to transfer to your new profile)
  • See-> Firefox - profile folder (this article is a complete list of files and folders in your profile)
  • See-> recovery of data from an old profile

  Don't forget that you will need to re - install on your new installation of Windows 7, all Extensions (including the toolbars you have installed), Plugins and themes you have installed in Firefox.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.