disk upgrade for G4-1318tx?

Similar Questions

• I received a disk upgrade for windows 7 for my pc to microsoft, but now I get the message that says that my copy of windows 7 may not be true. What should I do?

  When I bought my laptop, it came with windows xp. I found that there was a lot of programs that were not compatible with xp, so I asked microsoft one say upgrade to windows 7 to upgrade my system. Everything worked fine until about 3 months ago when I kept getting a message on my screen that says that my copy of windows 7 is not genuine.  I tried all the tools on the microsoft Web site to solve this problem, but nothing has worked. Finally, I used the diagnostic tool to verify I checked that I put in the activation code is right, what is causing me to pass this message and what I can do to correct that only cost me an arm and a leg? Thank you for your help.

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK will run the next time he started - press Y, press ENTER, and then restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the created CBS.log (C:\Windows\Logs\CBS\CBS.log) file on your desktop (you can not manipulate directly) can compress the copy and transfer it to your Public SkyDrive folder (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

  new hard drive

  I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  http://www.PAGESTART.com/acronisnewharddrive01.html

  The same technique should also work for Vista.

  Note: Acronis now sells their 2012 for the UI version may be slightly different.

  J W Stuart: http://www.pagestart.com

• Virus ruined Win7, no disk upgrade is?

  Hello world.

  I have a laptop, G70 - 467 CL.  It came with Vista, with the promise that when Windows 7 is out I could upgrade for free.  I did as soon as I could.

  Here, 3 years later, I catch a virus that started my impossible machine.  I took the HD, copied my important files on a backup HD and started from scratch.  Only problem is, I can't find the upgrade disc ANYWHERE.

  Any help you can give me would be greatly appreciated, because I am in the 3rd week of a school semester new and I can't do without my laptop.  (That and I forgot how sucked much of Vista AND Win 7 to purchase seems silly since I already...)

  Anyway, I don't remember if sent HP upgrade disks or if you need to download Windows 7 or what the deal was, because it's been awhile.  If they sent discs, I can't find mine anywhere.  And the HP website is a mess when it comes to order recovery disks.  (On Windows 7, Vista no.  I did those, they worked...)  AND I must pay if I even want to talk to a real person...

  My apologies for my tone.  This whole ordeal is * really * bothers me...

  Thank you in advance and I appreciate really help everyone.

  Good evening.

  Brian

  To the best of my knowledge, the Windows 7 upgrade disks once lost, cannot be pronounced again. (Microsft restriction I guess, because of the long period since the program was launched). This is why I think that the only option is to have a retail version of Windows 7 and install it to your laptop.

• Get the 8004FF84 error when you try to download and install an upgrade for Windows

  I can't download and install an upgrade for windows. Try to install the product error code 8004FF84.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Media Center is Reporting insufficient disk space for each record programmed

  Since the upgrade to Windows 8 Media Center reports that there is not enough disk space for each scheduled TV recording despite there are currently more than 1 TB of free space. The programs record very well, but it is impossible to tell when it is a genuine issue (for example, a program conflict) as an indicator of each scheduled recording is also problematic.

  There is a simple solution to this in Media Center as an administrator (which implies that there may be a problem of permissions with Windows 8). However, I also use an XBox 360 as an Extender and there is no known method to apply this workaround to an Extender then it continues to be a lack of disk space for each unique record.

  I tried completely removing the recorded TV folder, followed by a reboot to allow Media Center services recreate the folder, but it does not solve the problem. I checked all the settings and Media Center reports that it has enough free space to save more than 400 hours of television, but he's still complaining lack of disk space for each individual scheduled recording.

  Any ideas?

  I found a solution that worked for me on another thread.

  See the post from Steve Scoltock on executing a recovery job in the computer management application, here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Windows-8-TV-recording-problem-with-Windows-Media/f9695954-246F-4C59-8d1b-3729a81feee9?page=1&TM=1352456456164

  It worked for me.  I hope this guy helps too.

• How to allocate disk space for vCenter server logs

  Hello

  I plan to level 4.1 to 5.5 U2d vCenter on the customer site. One of the conditions set out in the vSphere upgrade guide is:

  "In vCenter Server 5.x, the default size for vCenter Server connects is larger than in vCenter Server 4.x. make sure that the disk space allocated for the log folder is sufficient for this increase 450MB."

  My question is how to allocate disk space for the log file and where can I find the disk space allotted to file papers to vCenter 4.1 existing?

  Just see the free space on the partition where the vCenter server logs are stored. If it is insufficient, increase the size of the virtual disk and then increase the file system to the guest OS.

• vCenter data recovery - is it upgrade for VCB

  Hello

  I wonder if vCenter data recovery is an upgrade for existing ESX enterprise clients using VCB, or it is a new product which must be purchased?

  any ideas?

  VMware data recovery is intended as a product recovery and backup of disk to disk for virtual machines.

  The product is included in some editions of vSphere and downloadable and add-on for some of the other (for example standard).

  hope that helps,

  Lee Dilworth

• white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  Computer works wonders but new applications are not supported by 10.6.8

  Unless you have a specific reason to choose one plus one, El Capitan.

  (144668)

• Can I install Firefox in a way that will never check an upgrade for all users?

  In the approximately 500 mV VDI environment I would like to disable checking of upgrades for users of all virtual machines. We cannot update Firefox until we have ensured that the new version works with specific tools. Virtual machines are linked clones that are being refreshed to their State before logon after users log off. This causes the popup to come upgrade whenever users connect. Users are not allowed to upgrade, then it is a nuisance that I would like to eliminate them.

  I found that I can use on: config to disable checking of upgrade on the image, where all virtual machines are created, but cela will not shut it for all users for the user with which the image is kept. Is there a central setting that allows me to do this? Or this would require a change in profile all users? And if the latter, what a change I need to make to their profile?

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

  lockPref("app.update.enabled", false);

• How can I get an upgrade for my Satellite 4010CDT?

  How can I get an upgrade for my laptop S4010CDT / 4.0 NL TOSHIBA?

  Hello

  I guess you're talking about the Satellite 4010CDT
  Did you mean hardware upgrade or update of the software driver?

  If you mean the upgrade of the software so I found some drivers Toshiba for Win95, 98 and NT on page of Toshiba.

• CPU Upgrade for Presario SR1110NX?

  Is there an available CPU I can use an upgrade for a Presario SR1110NX? It currently has a Celeron processor (I don't know what type of socket). If not, is there a motherboard I can get low fees for this case that does not require update me all my (old) devices and memory? I don't want to buy a new machine until the summer, but my CPU usage is at 100%.

  Thank you

  Dante

  Hello

  Which will support your card mother MS-6577 (Giovani, Giovani2).

  Socket 478 for Intel P4 Willamette and Northwood 1.4 GHZ to 2.8 GHz or higher processors.

  Here is a link to NewEgg for a card mother microATX replacement. You will need to buy the DDR2 memory, but it's pretty inexpensive. All of your devices will work in this one. You need to replace the power supply. The diagram of the motherboard is not marked ATX is an owner of COMPAQ connector configuration. Try to use it on a new motherboard will probably lead many motherboard smoked and fried

• X 250 additional storage drive? Hello! Is it possible to have an another disk storage for X 250?

  X 250 additional storage drive?

  Hello! Is it possible to have an another disk storage for X 250?

  Hello

  "I just got a X 250 myself and am currently play with using an SSD of m2 (2242 size, it's a little smaller than an mSATA SSD) and a"regular 7 mm of height"2.5" SSD in as well.

  Kind regards

  Aryeh Goretsky

• Power Supply Upgrade for a Lenovo 3000 K100

  Greetings,

  I have a Lenovo desktop computer that I would like to upgrade. Firstly the power supply. I was wondering what is the stronger power supply that I can put. So that when in the future when I purchase an upgrade I won't have to worry about food being a problem. I also noticed that the power cable area is located in a different place when I look at power supplys. Is there a certain format that I need to keep in mind? All the detailed data would be a great help. If you need more going off and then comes the series I left in the subject, let me know. Thank you.

  Hi djmclaughlinjr and welcome to the community.

  Here's a thread on it with instructions to hang the light of power dial.

  http://forums.Lenovo.com/T5/Lenovo-3000-and-Valueline/upgrades-for-the-3000k100-desktop/TD-p/2439

  Kind regards

  Dave