Disk with two partitions - Delite one

Similar Questions

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• Z400 disks with EFI partition not mounting after the Windows 7 Pro upgrade

  HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed.  Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter.  All other discs mount correctly.  Disks with EFI partition will mount on other PCs.  All the drivers seem to be current and fuctional.

  I thought about it... after two weeks of puzzle, I finally found the cause.

  I run MacDrive 8 so I can play discs with HFS + formatting.  This program should be completely uninstalled and reinstalled after the upgrade.  I had turned it off before the upgrade, but it takes more than that.  Everything works now as expected.

  But wouldn't be INCE if Windows reads discs mac natively?

• HD with two partitions, H:Basic in C:Basic with NTFS and Fat32

  My office have unique u HD with two partitions. H: 6.99 GB with FAT32 and the C: with 143 GB and NTFS system. My system works only on drive H: it almost full during the 6.60 GB GB C: 3 busy with that and the rest empty.
  I already have the Win XP SP2 system and can no longer operate the lack of space on the H: drive
  Please how can I fix this problem in my pc

  I'm sory Mr. Noel, I have a question

  When I Higlight the M0 H: partition click on resize.

  After checking me open a window: resize with the partition information, size = 6142 MB, minimum size = 5897 MB and max size = 142629 MB in the center of the window "new format" due to its size than now, size minimum changes for your size permittedtheir max, what am I doing here?

  Thank you

• Portege R700 rebuild, ended up with two partitions

  Hello

  I did a full rebuild of my R700 since the recovery Tosh media today.

  Since I have a relatively small hard drive (120 GB SSD), I wanted to just have a drive. Worst of all, I certainly didn't want to have all files on the C: drive by default username more little that has all the apps.

  Can the two be easily merged partitions or am I buggered here? To specify me if honestly, I don't know what I would do differently even when there is no option in the reconstruction.

  For now, everything is on C:, including all the user and document records, on the D: there is a folder called "HDDRecovery" which I think was put there when the system has been rebuilt.

  Suggestions appreciated!

  Thank you

  Alastair

  > Can the two be easily merged partitions or am I buggered here?
  Well, the recovery disk created these two partitions automatically because the second contains the files on HARD drive recovery and option which means that you might be able to recover the HARD drive unit.

  But two partitions can be merged together; Look for the free tool called GParted
  http://gparted.sourceforge.NET/

  You can also use the internal option of the Windows operating system.

  In disk management, you can delete the second partition and can then lay the first partition.
  It should also work.

• How to create Secureboot DELL PE disk with NTFS partition

  Hi Tyler

  I tried with /secureboot command line switch, but its not allow me to change partition to NTFS format.

  Answer me as soon as possible

  Thank you

  Deepak

  Deepak,

  To start under UEFI, you need to boot from a FAT32 partition and since USB Thumb drives allow only one partition, the tools for FAT32 only locks. A secondary drive which is NTFS, or even a network drive could be used to store your WIM files if they are bigger, then the limitation of 4 GB to FAT32. Just start with the key USB ImageAssist and point the tool corresponding to the NTFS drive or use it to map a network drive.

  Thank you

  Gary

• SQL to communicate with two rows in one record

  I have a source table that includes data in the following format.
  CON_ADDR_ID TIME_CONFIGURATION START_TM END_TM
  1 GU-798 Tuesday 1/1/1980 08:00 1980-01-01 17:00
  1 GU-798 Thursday 1/1/1980 07:00 01/01/1980 16:00
  
  I need to concatenate fields time_configuration, start_tm, end_tm for con_addr even
  
  For example, for the light of the foregoing, the output should be * & you = 480, 1020 & th = 480, 1020 *.
  
  Logic: -.
  
  1 convert the time in minutes
  Min start time = 8 h = 480 min
  End time in minutes = 17 h = 1020 mins
  Beginning in minutes hour = 7 h = 420 min
  Time in minutes to end = 16 h = 960 minutes
  
  2 concatenate 2 rows and 3 columns.
  & < Start the day in format MM > = < start in a few minutes time >, < time in minutes left > & < start the day in format MM > = < start in a few minutes time >, < time in minutes to go >

  user10566312 wrote:
  I have a source table that includes data in the following format.
  CON_ADDR_ID TIME_CONFIGURATION START_TM END_TM
  1 GU-798 Tuesday 1/1/1980 08:00 1980-01-01 17:00
  1 GU-798 Thursday 1/1/1980 07:00 01/01/1980 16:00

  I need to concatenate fields time_configuration, start_tm, end_tm for con_addr even

  For example, for the light of the foregoing, the output should be * & you = 480, 1020 & th = 480, 1020 *.

  Logic: -.

  1 convert the time in minutes
  Min start time = 8 h = 480 min
  End time in minutes = 17 h = 1020 mins
  Beginning in minutes hour = 7 h = 420 min
  Time in minutes to end = 16 h = 960 minutes

  2 concatenate 2 rows and 3 columns.
  &=, &=,

  According to your logic, shouldn't be out & you = 480, 1020 * & th = 420 960 *?

  Can be:

  SQL> ed
  Wrote file afiedt.buf
  
    1  with sample_data
    2       as (select '1-GU-798'
    3                  con_addr_id,
    4                  'Tuesday'
    5                  start_day,
    6                  to_date('1/1/1980 8:00:00 AM', 'DD/MM/YYYY HH12:MI:SS AM')
    7                  start_tm,
    8                  to_date('1/1/1980 5:00:00 PM', 'DD/MM/YYYY HH12:MI:SS AM')
    9                  end_tm
   10           from   dual
   11           union all
   12           select '1-GU-798',
   13                  'Thursday',
   14                  to_date('1/1/1980 7:00:00 AM', 'DD/MM/YYYY HH12:MI:SS AM'),
   15                  to_date('1/1/1980 4:00:00 PM', 'DD/MM/YYYY HH12:MI:SS AM')
   16           from   dual)
   17  select listagg(tm, ' ') within group(order by con_addr_id) val,
   18         min(con_addr_id)                                    con_addr_id
   19  from   (select con_addr_id,
   20                 '&'
   21                 ||substr(start_day, 1, 2)
   22                 ||'='
   23                 ||( ( start_tm - trunc(start_tm) ) * 24 * 60 )
   24                 ||','
   25                 ||( ( end_tm - trunc(end_tm) ) * 24 * 60 ) tm
   26          from   sample_data)
   27* group  by con_addr_id
  SQL> /
  
  VAL                            CON_ADDR
  ------------------------------ --------
  &Th=420,960 &Tu=480,1020       1-GU-798
  

• Can I get the Win 7 on a hard drive with multiple partitions without erasing all the data on the disk

  I have a HP p6310f with a 1 TB hard drive partitioned into two partitions.  One I have a Win 7 OS, which becomes more and more corrupt.  I would get a new version on the other partition and keep the old version until I don't know that I have restored all the programs and data properly, just in case I need something and are struggling to rebuild.  Is this possible?  When I tried to install the recovery disks, they said that the entire disk, not just the score, would be erased.  This seems a bit silly, but I am very worried about losing key information and programs that I am not able to restore.

  Hello

  If you use HP recovery disks to reinstall the operating system, you are right that they reformatted the whole HARD drive before installing the operating system.  As far as I know, has no way around that.  The only thing I can suggest is to make sure that you are able to get the installers of any program that you need before you restore the PC and maybe do two backup copies of all your personal data, just to be sure.

  On the link below, just select your operating system (Windows 7 32 bit or 64 bit) and verify that you are able to download the drivers and software you need before you reinstall it.  You can always save installers for a writable DVD etc. now and then just to run it from the disk when you want to reinstall.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us β = en & product = 4107914 & 〉

  I hope this helps.

  Best wishes

  DP - K

• How to use the recovery on the Satellite A100-192 with 2 partitions CD

  I have a satellite a100-192 with 100 GB hard drive.
  When I bought it I used magic norton 8.0 partion to divide the disk into two partitions, c drive (used for files of program and other things; 20 GB) and d ' drive that I use for all my documents, music, videos and similar stuff...

  and now, because of a few bad shots, I made (the software bad... lol) I want to reinstall windows. and honestly, I have no idea how to proceed. what I mean, I don't know what cd to use (I have two CD when I bought the computer), in fact I guess that's the one with ms a note on it, but how to do it safely without losing all my data on the d drive?

  The problem is that I did a lot of relocations on desktop computers when you hava clean facilities and then I know what I'm doing, but I have no experience with bundled windows installations.

  Hello

  Usually, Toshiba laptops are supplied with a Toshiba restore CD.
  On this CD, you will find the image of Toshiba which contains all Toshiba drivers and utilities.

  The question is what CD image you received.
  Some people here in the forum suggested that, since January 2006 the Toshiba Recovery CD supports another recovery procedure. The new recovery CD does not support the ghost but the surface RECO and it s not possible to choose the partition for the installation of the OS.
  In this case the whole HARD disk will be deleted and you will lose all your partitions.

  I have only one old recovery CD and so I can't say if it is possible to choose the right partition. It was possible on the old recovery cd by selecting the expert mode.

  In my view, that should make a backup of you all important files before you begin the recovery procedure.

• With EFI partitions will not rise

  HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed.  Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter.  All other discs mount correctly.  Disks with EFI partition will mount on other PCs.  All the drivers seem to be current and fuctional.

  Hello

  I never got a message error... all options have been grayed out.  And I tried the guest... but it has not yet been recognized in disk management.

  But after two weeks of puzzle, I finally found the cause.  I run MacDrive 8 so I can play discs with HFS + formatting.  This program should be completely uninstalled and reinstalled after the upgrade.  I had turned it off before the upgrade, but it takes more than that.  Everything works now as expected.

  But it would be really nice if Windows reads HFS disks...

  Thank you

  Scott

• How can I install Windows 7 on a desktop Dell running two Partitions XP?

  We have a Dell XPS 400 machine running Windows XP Home Edition with two partitions, the ethat on is used, and then an elder who has been corrupted and restored.  Nevertheless, we have tried to install Windows 7 Professional 64 - Bit Version on a CD.  When we tried to install it as usual, it wouldn't read the disc... we tried it in two disk drives at startup and under XP.  A way to solve this problem?

  You cannot start the installation to a 64-bit version of Windows 7 from Windows XP, you must boot from the disc and select the partition during the installation where you want to install Windows 7.

  After inserting the disc of Windows 8, restart your computer and boot from the DVD.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  -----------------------------

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Two Partitions of BootCamp, cannot start second of two.

  I created manually two partitions Bootcamp as each boot fine using BootCamp. The images have already worked as unique BootCamp partitions.

  Windows 8.1 is on/dev/disk4s2, Windows 7 x 64 on ./dev/disk4/s3

  When I create an automatic configuration of BootCamp, it built a virtual machine with two partitions of/dev/disk4s2 Startup - Windows 8

  I have reproduced the configurations, but created new disks:

  Create the Fusion.app/Contents/Library/vmware-rawdiskCreator applications/VMware\ $ / dev/disk4 3 ide BootCamp7

  Create the Fusion.app/Contents/Library/vmware-rawdiskCreator applications/VMware\ $ / dev/disk4 2 BootCamp8 ide

  I then removed the old files vmdk and pt-vmdk beams, added these and edited the VMX to reflect the name change. The discs appear correctly in the GUI.

  The configuration of Windows 8 on slice 2 boots fine, but Windows 7 on unit 3 eventually try to boot from the network with a boot disk not found. The BIOS is configured correctly and sees the drive. Settings is configured to boot from the hard drive.

  What Miss me?

  -Harald

  Just realized it as legacy boot. Only a SINGLE boot partition 'Active' for Windows by drive.

  It's bee too long...

• Using a remote control or the remote with two Apple TV app?

  1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

  2. an iPhone Remote APP can be used with two different Apple TV?

  Thank you.

  1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

  2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

• bar graph with two scales of y

  Hello

  I have a graph with two scales different (one on the left side from 0 to 50, the other to the right of 0 to 1)

  Now I want to draw horizontal lines limit. I do this with the programately adjustment sliders.

  But I can only put the sliders that "belongs" to the first scale.

  Is there a solution?

  Thanks for any help

  Yves

  LV 8.6

  Hi Yves,

  You can assign each slider to a YScale. Simple right click on the cursor and choose the YScale. I think you can also do it programmatically.

• VMware device with 2 network cards claiming the same IP address with two MAC addresses

  Hello.

  I see messages intermittent my gateway network two MAC addresses associated with a virtual machine running on a 5.5 ESXi host for the same IP address.

  The virtual machine is a MiTel 3300 controller for a VOIP system. the system is configured with two IP addresses, one on the local network and another with a public IP address in the DMZ. In the network configuration of the 3300, I assigned the address LAN IP at 00: 0C: 29:30:B2:B2 and the DMZ IP at 00: 0C: 29:30:B2:BC (Mac for network devices presented by the ESXi host virtual machine).

  On the host, I configured a vSwitch with exclusive access to two physical network adapters on the host machine. The vSwitch is configured with two machine virtual port groups, LAN and DMZ, with access to the physical network interface cards. Tab grouping of groups vSwitch port NIC, I replaced the order of failover of the switch to activate an active NETWORK card only for the Group of LAN ports and the other card NETWORK only for the DMZ port group. (I don't know how the content of the column of networks is determined. Neither is correct for the traffic on the physical switch. If these are configurable, please advise and I'll change the settings). The relevant parameters of vSwitch, groups of ports and VM are distinguished below.

  On the virtual machine itself, through the VMWare host, I assigned 00: 0C: 29:30:B2:B2 for the Group of LAN ports and 00: 0C: 29:30:B2:BC to the DMZ group port (best I can tell, anyway, since the MAC address field annoyingly obscures the last two digits of the MAC address - break if I invert the mapping) (, but all seems OK).

  The goal here is to make sure that MACs of ports vSwitch the 3300 is listening and sending always correspond to the physical ports that are VLAN Tag by the physical switch to ensure the routing. Generally speaking, it seems that what is happening but, intermittently, we cross one-way calls that suggests a problem of routing between us and our SIP trunk provider; coinciding with these incidents, I get an email along the lines of "the security in the network device has detected a conflict of IP address with two or more devices. The period of INVESTIGATION "DMZ. DMZ. DMZ. DMZ' is claimed by the following clients with MAC addresses: ' 00: 0C: 29:30:B2:B2' ' 00: 0C: 29:30:B2:BC'. »

  I did something in the configuration that would lead to this kind of collision intermittent? Have a hacked together a way to do something that could be accomplished in a way that is simpler and more reliable?

  Thanks for any idea that you can offer.

  Kind regards

  J.

  

  

  

  I probably don't fully understand your configuration, but it seems that you are not interested in using the collection of NETWORK adapters in the virtual switch of the VM MiTel 3300.

  If it is correct, why not create two virtual switches, each with a group of port (LAN and DMZ) unique and with a separate connection of (vmnic2 and vmnic1)?

  In general, collection of NETWORK adapters may be used to share traffic between uplinks and ensure that if one of the uplinks connect fails, a virtual machine still has access to the network.