Two Partitions of BootCamp, cannot start second of two.

Similar Questions

• Delete the Linux partition and now cannot start PC

  Hiya,

  I had partitioned my HD to a disk of windows xp and linux by car. I deleted the Linnux partition using the application for the removal of a partition in windows. I cannot start my computer now. When I turn on my PC, I get the screen toshiba with all the small icons and then what follows:

  Intel Boot Agent GE v1.2.45
  Copyright (C) 1997-2007. Intel Corporation

  PXE - E61 Media test failure. check the cable
  PXE - M0F: exit Intel Boot agent.
  error: no such partition.
  grub rescue >

  I do not have my recovery as I am overseas at the moment. What can I do? I use a friends pc to write this. The sick PC is a laptop.

  I'm not very computer chip - so if you are kind enough to answer for me, please speak slowly and use easy words ;-)

  Van
  Shaari

  Hello

  You can download the Setup from the Microsoft page of WIindows disk:
  http://support.Microsoft.com/kb/310994/

  Then you could install the Microsoft recovery console that helps you use the commands * Fixmbr and Fixboot * to fix the Boot Manager:
  http://support.Microsoft.com/kb/307654/

  I think this should help other rational use the Live like BartPe or WinPE disc to boot up the laptop.

• Bootcamp partition extended, now cannot start Windows

  Hi all, hope you can help. Running Windows 7 on Bootcamp partition. OS X El Capitan 10.11.5 on the other side.

  Needed to make Windows larger partition to install away from port, although comments, not sure that all this pain is worth it. That's what's happened so far:

  1. I enlarged the Bootcamp using disk utility partition

  2 restart the computer and now the Alt key, I could not see the usual option to start the Windows partition.

  3 then I read that I had to go to the preferences system and make my boot drive Bootcamp, I did.

  4 but on reboot, I get the error message "no boot device - insert the diskette and press any".

  5. isn't a step 5. The hope that you could help me find one.

  Thanks in advance for any wisdom.

  How to enlarge a Boot Camp partition is either:

  a. assistant Boot Camp use to remove Windows and refer the reader to a single partition. Then reinstall Windows using Boot Camp Assistant by specifying the size of Boot Camp, that you need for now.

  b. use CampTune, a third-party application, to resize one already set up to the Boot Camp partition.

• Cannot start after the formatted NTFS partition

  Option to boot OS X suddenly absent after that I formatted the partition NTFS (bootcamp) of Windows installation.

  

  I read many previous question in many Web site and

  I tried to fix it in disk utility, but it cannot go up more.

  user mode single launch I tried, but it does not start.

  already reset NVRAM and SMC.

  Is there not any solution to start again or access my files in the partition mac to back up?

  Thank you.

  Somehow, you managed to format your OS X with making it unusable NTFS volume. I recommend you do the following:

  Clean Install of El Capitan

  Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.

  The Utility Menu appears in 5 to 20 minutes. Be patient.

  Select disk utility, then click on the continue button.

  When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.

  Click the Partition tab in the main window of disk utility. A panel will fall.

  Set the GUID partition scheme.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then click the fact when it is active.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

  This should install it the version of Mac OS X that has been previously installed when the computer was new.

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Re: Satellite A210 - cannot start and how can I backup my data?

  Hi, after installing some software of spyware on my vista A210 (spysweeper) I rebooted my laptop, restart it went straight to the Boot Manager and load insert me my recovery disc and follow the instructions in an effective way. The only options I have with this disc to format my hard drive, it seems to indicate that it will erase everything (that would include things on my partitioned drive?).

  No there is no way to start the PC in safe mode? I tried using the F8 key, but couldn't get the SafeMode menu by using the recovery disk to start my machine. So when I chose to start windows in safe mode it loaded the disc in place.

  This sounds like a familiar problem, if so someone knows how can I restore the last parameters of weeks without access to windows?

  I'll have to swallow and format my drive, on the partition that I have a few photos, etc. that I've not saved yet a trip last week so I want to only do this as a last resort?

  Would I be able to go buy a copy of vista and fix it using the CD? My laptop came with windows vista installed but no windows disk.

  Any help is very appreciated!

  Thank you.

  If you are not able to go into the F8 advanced boot menu, you cannot start in safe mode. It's done.
  I think the only way is to reinstall Vista.

  The reason why the laptop came without installation disk is the disk HARD on the second partition a folder called "HDDRecovery". This folder contains the factory settings and you can restore it if you go to the menu of advanced, boot repair my computer and then you can select the Toshiba Recovery feature.
  In addition, you always get a reminder message that you must burn this image to a DVD:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  However, now it is too late to burn the recovery disc.
  In your case, I would order a Toshiba Recovery disk directly. Then, you can reinstall the laptop and the Toshiba drive already contains all the drivers and tools.
  Here you can order: [https://backupmedia.toshiba.eu/landing.aspx]

  If you use the recovery disk Toshiba that the whole HARD disk will be formatted. You should back up your data before doing this.
  To do this, you can buy an external HARD drive enclosure. Remove the HARD drive from the laptop, put it in the case and plug it into another PC or laptop. Then, you are able to save your data.

  I hope I could help you.

• HP ENVY m6 1206 TX: cannot start Windows (8.1)

  The other day I wanted to turn my computer off and let it, because I was in a bad mood and wanted to get awy and do something else. But when I went to click on update and stop, I clicked on update and restart. I more wanted to leave everything to rest because he was for a long time on the computer. But I waited for the update that stopped on 27% for a long time, after going quickly through the others. It probably would have been fine, but I was imptient and took the incredibly stupid decision to force the computer to turn off because I was tired. The next time that I turned it, Windows wouldn't start.
  
  When I try to start the computer, it says:
  
  Auto repair
  
  Your PC did not start successfully
  
  So, I can either tap on restart to restart my PC that it can sometimes solve (this isn't for me). Or go to advaced options.
  In options advanced > troubleshooting, I can update my pc without losing the files but that fails.
  Then options are more advanced. I can do a system restore, but there is none. Same thing with system image recovery. Starup repair fails. Command PROMT... I don't know what to do. Even with the settings of the UEFI firmware. There is start parameters also right up. I don't know what to do with them.
  
  In a quick test of the system, everything going except Hard shore short check the DST, who said the warning. No info was given, which doesn't really help.
  
  I can do with these options that could help? Or should I send repair? Or, if the reset in advanced options option is different to the first, what should I do? I doubt that it is the same because he says that I will lose all my files, whereas it would appear to the other literally just restart the computer.

  Thanks for any help.

  Redstar86

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your PC is no longer to leave and wanted to help.
  
  The description of the problems you are experiencing generally indicate one or two of the following ways:

  (1) defective hard drive
  (2) damaged/missing bootloader files

  Already, you did the second and said that has not fixed the problems.

  And you have already received errors on the first.  To confirm the status of hard disk, please follow the instructions in this link to test your hard drive: http://support.hp.com/us-en/document/c00439024
  
  If that confirms that your drive has failed, then you will need to replace it.  Please report back if this is the case.

  If the drive has failed, you will need replace it and order the HP recovery media to restore your PC to a working state.

  As for recovery, onlu Refresh keeps the files; the other delete files - so before you make them, you must save all the files and folders you want to keep.  If you cannot start the PC enough to do this, you would need to remove the drive from the PC, buy a USB-to-Hard-Driver adapter, connect the drive to another PC and copy files and folders there.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Re: Equium A210-1AS - blue screen and cannot start

  My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

  in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

  UNMOUNTABLE_BOOT_VOLUME
  STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

  I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
  I use Equium A210-1AS
  Part number: PSAFJE-005005KS
  Windows vista 32 bit

  Thank you

  I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

  null

  > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• BOOTMGR image is corrupt. The system cannot start.

  Toshiba Satellite L355: MODEL No.: PSLD0U-00800 X

  Start the computer, a black screen with the wording of the "BOOTMGR image is corrupted.  The system cannot start. »

  Use the Applications/drivers, satellite L350 series windows vista Home Premium 32 - Bit SP 1 comes with the laptop in the DVD player and Toshiba Recovery and you will see the loading of the window.  After a certain time.  Screen pop up as Windows boot manager below:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your computer manufacturer or the system administrator.
  File:\windows\system32\boot\winload.exe
  status: 0 xC0000001
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He did not show the original image from all the instructions on-screen (System Recovery option).  How the diagnosis without system recovery option to find the laptop computer component failure?  First impression of the BOOTMGR image is corrupt is the failure of hard drive, but I replaced the new hard-drive(SATA 2.5"MOMENTUS") and tried used the disc of discovery.  The result displays same window boot manager as described above.

  What is the suggestion to the exception to send to the repair shop?  Thank you

  Hello

  Your Toshiba did not come with two discs? One allows the Startup Repair - start a boot and press F12 for
  Select DVD as the boot device.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Unable to boot Windows vista-windows boot configuration data file is missing required information-
  Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  If necessary:

  Toshiba support - click on connect and contact the technical support and/or forums
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Photosamart Premium: the program cannot start because hpqcutil.dll is missing

  I've had my printer for quite awhile.  Recently I had to download as because wireless USB port would not work.  I've used it since, but yesterday, I changed two cartridges.  Once I tried scanning photo and save it I got the message: the program cannot start because hpqcutil.dll is missing from the computer.  Try reinstalling the program to fix the problem.

  I reinstalled again today and still get the same message.  How do I now please?

  HP Photosmart Premium 309

  Lyn

  PS my system is Windows 7.  32-bit.

  You don't need the installation disc at all. Discover the second option in my last post, where you can download the airline pilot, I posted for you as well. Once the download is complete, installation begins, for now, cancel the installation and start following the steps in the second part of my last post, and that will help you perform the uninstall of level 3.

  Good luck

• Cannot start the physical machine converted to a virtual machine under ESXi 4.0

  Hi all

  I have 2 has with the material below

  Dell optiplex 755 2.4 Qcore 4 GB of RAM and 160 GB of HARD drive

  A performer with ESXi 4.0 other runs with Windows 2003.

  I tried to convert physical machine with "Vmware Vcenter converter Stand alone" 4.0.1 build 161434

  I used the tool on the source machine and by another machine on the network.

  The two process converts the physical machine to a virtual machine successfully without any errors.

  After conversion, the virtual machine cannot start, and shows only a small slider that is not flashing too.

  

  The physical machine have a single partition of 160 GB

  The space currently used on the physical machine is 26 GB.

  I reduced the size of the HARD drive to virtual computer with fix / light available in 40 GB.

  point to make here is that the ESX have only 160 GB HDD, so he will not be able to copy all 160 GB because of which I am reducing the 40 GB HARD drive

  I converted a few other physical machines with 40 GB HARD drive and they work well after the conversion.

  Any sugessions would be greatly appreciated.

  Thanks in advance

  Hi Sunil,

  Let me know the drive selected in the custom option controller.

  Thank you

  Krishna

• HP 8440p: Audio device high definition - device cannot start (Code 10)

  I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.

  Device Manager indicates that "this device cannot start (Code 10)"

  Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver

  Details tab - value = device high definition Audio

  Tab events - (information)

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.

  

  Any guidance is appreciated.

  Hi @JS2045

  The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.

  I looked around for a driver W10 to the hardware ID you have published and fails.

  This device is necessary unless you want or need audio via the port display.

  The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...

  Download, but do not work with this graphics driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059

  Download and install this free utility for files.  64-bit is the second listed file.

  http://www.7-zip.org/

  After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.

  Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).

  Go to Device Manager and click on the audio device problem Intel HD requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.

  If this driver audio works on W10, I don't know.

  But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.

• PROTECTED 2010 cannot start the Slimline Combo drive

  Hello

  I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

  A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

  Both computers are running Windows XP 2nd edition.

  ????

  Thank you

  Best regards
  Anne Mette Voss

  Hello

  Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
  Hmm I think I have an idea.
  I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
  Reboot the laptop.

  After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

  Good luck

• Cannot start the operating system preinstalled on Satellite L350-170

  Hello!

  Today I was surfing on the internet on MSN etc and my phone froze. I tried control, alt, delete etc and nothing happened so I finally pushed the power button.

  When I turn on the laptop now I get this:

  * Windows Error Recovery *.

  * Windows cannot start. A recent hardware or software change might be the cause.*

  * If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the people was interrupted during startup, choose Start Windows Normally.*

  * (Use the arrows to select your choice.) *

  Launch Startup Repair (recommended) *.
  * Start Windows normally *.

  When I choose the first option (startup to launch repair) a loading bar comes up saying "Windows is loading files...". ': then a loading bar "Microsoft Corporation", then this charge and brings me to a gray screen:

  http://i43.Tinypic.com/23jspqe.jpg

  When I select the second option (start Windows normally), I just get this loading bar for ages, and that the bar is load from the top down, I kept it at least half an hour, a few times and it still remains on the loading below bar:

  http://i43.Tinypic.com/sw3jbt.jpg

  Any help is much appreciated, thank you!

  Hello

  Start your laptop and press F8 to display the advanced startup options.
  Option repair my computer is available?

  If so this option allows to enter system recovery option. There is option called Startup Repair. Try using this option to solve this problem.

  Let me know if this will help.

• Satellite L300-19F starts not-cannot start Windows

  My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

  I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
  Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

  Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

  Please notify. Kind regards.

  > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
  No, it is not possible!
  If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

  You can try to start by using a WinPE
  http://www.LiveCD.com/

  This allows you to start the device and access the data on the HARD drive

  You could also build own Windows live CD
  Check this box:
  http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/