Disks hard area 51. R2 (end of 2014)

Similar Questions

• Alienware Area 51 R2 (end of 2014) ejection of the optical disc drive does not

  New Alienware Area 51 R2 (end of 2014) happened the month last in January 2015. Not tried any DVD or Blue-ray until yesterday. The optical drive eject button does not work in windows pro 8.1, but soft eject works in click with the right button on the drive and select "eject". The button works also before starting Windows start. I invited it must be a software problem and could be fixed by updating some drivers. But I googled a lot and can't find solutions for other Alienware models, but not for the Office of area 51 R2.

  Bluetooth also does not work, but fixed with a new driver from Intel.

  Install the driver from the disk...

• Area 51 - R2 (end of 2014), maximum length of the video card?

  It has space for GTX Titan X (pascal). 10.5 "?  And power connections required are 2 x 8 pins. I wasn't far into my computer at the moment. Have I not 2 x 8 pins? It's the Gen 3 bus @ 16 right total pins x 2? Also, anyone know if the Titan X GTX is bi - GPU?

  We sell area 51 - R2 with the following Nvidia GeForce Titan X = 1XXH0
  12 GB
  BI - GPU
  PCIe x 16 Gen 3
  DVI-I/DP1.2/DP1.2/DP1.2/HDMI2.0
  6 pins + 8 power pins
  Height 4,376 "
  Length 10.50 "

  

  My area 51 - R2 has it.

  Power supply 6 pin--> 6-pin to 8 pin Cable--> Titan X 8 pins
  Power supply 6 pin--> 6-pin to 6-pin Cable--> Titan X 6 pins

• Software Windows 10 and Alienware (area 51 R2 end of 2014)

  Ive noticed on the Alienware system software check - when I hover over the options (verification of the system upward, tools, community, etc.) the fonts change / corrupted - more.

  It all works, but is - anyone else knows this glitch?

  Changing the settings in the bios fixed that.

• Change the hard disk of 1.4 Ghz Mac Mini end of 2014

  Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

  My Mac is:

  Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

  So, my best regards to the community and hope for a response.

  I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

  • Samsung 850 Evo SSD
  • Cutting Ultra Slim 2.5 SATA to USB 3.0 aluminum hard drive external enclosure

  Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

  Good luck!

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

  Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Laughing out loud

• Mac Mini end of 2014 vs SSD Ram

  Hey guys, I just bought the Mac Mini end of 2014. Maybe I should blame myself for not doing some research that I have a model end of 2012 before that. I used to increase the ram myself whenever I need it, it was easy-peasy. So I bought the 2014 version, thinking that it will be the same. But no, the ram is welded on and there is no way that I can upgrade. The mac was bought to an APR, his return is not possible according to the policy of the store.

  I understand that if the RAM is not enough, the operating system will use hard disk space instead. So what I intend is to upgrade the HDD to the SSD, I have made the my previous Mac Mini. Just so that it allows to speed up the process and minimize the crash.

  Question, this will help solve the problem of ram? Nor can do anything and that's it?

  Yes a SSD will improve performance, and partially make up for not enough RAM. However, how well that depends on what applications run you. Some applications are memory intensive and may not show as much improvement

• iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot

  Hi all

  I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time.  It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.

  Here are the steps I've tried

  1 restart by holding the power button and turning it back on

  2. reboot into recovery by now cmd + R Mode

  3. enter in disk utility

  4 did not have a first-aider for my drive of fusion

  5 tried by clicking file > open or remove encryption (both selections are greyed out)

  6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)

  7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.

  I need help.

  Thanks in advance

  Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.

• Replace hard drive SSD on end 2009 27 "iMac

  end 2009 27 "imac

  OS X 10.11.3

  3.06 GHz intel Core 2 Duo

  4 GB memory

  According to the genius bar, the Seagate 1 TB hard drive on my end 2009 27 "iMac is a failure.  They told me that they do not have the parts to replace and suggest I do myself or take it to Best Buy.  Best Buy said that they are unable to do so I can't to try it myself.  I read and watched directions to ifixit and several other sites.  I am convinced that I have the skills to do the replacement, but I'm less confident about the purchase of equipment:

  (1) Ifixit say I should use a Seagate drive to replace the Seagate drive I have.  Engineering made no mention of this.

  (2) engineering suggested I buy a Crucial BX200 480 GB SATA 6 GB/s 7 mm (with 9.5 mm adapter) 2.5 "disk flash internal SSD (part #CT7414188).  The essential site says I need part CTSSDCONVT a 2.5 "to 3.5" SATA SSD/HHD converter for 2006-2012 MacPro.  They suggest that it will work in my iMac as well.  Articles and discussions have referenced problems with noise from the fan and order and mention with fixes software and manual control of the speed of the fans.  When I mentioned questions fan of genius, he said not to worry about this, and the Crucial site makes no mention of him either.  The SSD costs $129,99 and converter $ 21,50 for a total of $151,49.

  (3) OWC offers aDIY Bundle which includes a 480 Electra of mercury GB 3 G SSD, newer technology AdaptaDrive to allow installation of the 2.5 "SSD and a digital probe online that eliminates the noise of the fan and maintains control of the correct system fan through management for the iMac system controller.  The package costs $199,75.

  Bundle OWC seems like a good deal but it seems to me that SSD Crucial works to 6 GB/s and the Electra of mercury to 3 Gbps.  If I go through the replacement, it seems more sensible to get the 6 GB/s.

  I wonder if I can mix and match and use the Crucial SSD with the Adaptadrive of more recent technology and digital sensor OWC.

  Any suggestions from anyone who has done this replacement would be appreciated.

  2009 iMacs have SATA 2 - meant 3Gbps rate.  It does not matter if you use 2 SATA and SATA 3 - you get only speed SATA 2.

  Second - the adapter for 2.5 to 3 5 - don't hang a lot of money on this,-l'ebay has many choices.

  My personal experience, support 'intel' works best - since it is the length, so the seat fits much better.

  Yes, you can mix and match - choose what might suit you best.

  For me, I had Apple OEM SSD (Samsung doing this - 256 GB, SATA 3) with intel on iMac 2011 (SATA 3 speed), with support from OWC thermal line sensor.

  Samsung 830 (256 GB and SATA 3) on iMac 2010 (SATA 2 speed), with support from Intel, with OWC thermal line sensor.

  Note: the probe heat 2010 and 2011 are different.

  Good luck.

  Sam

• Disks hard = cached

  I always intend to create caching / storage setup with my 256 GB ssd (area51 r2 end of 2014) and I have at least 1 hard disk.  The question is, to allow RAID (needed to use intel SMART) I will have to install a second ssd in 3.5 "bays. Some forum describe 1 ssd, 1 hard disk, then activate the RAID and make changes in the RST SMART.   How does this work with 99 x express?  I see THAT RAID is announced to be supported by

  drive hard 3,5 '' bays only, however x 99 is announced to have the support of the RST SMART.  What is the truth. ??

  Yes!

• A51 SSDS (end of 2014)

  Will this turn in each slot 2.5 "sata?

  SamSung evo 2.5 1 TB sataIII internal ssd MZ-75E1tobam ($325.00)

  I also noticed disks 7200 RPM are the Go 3 speeds on inventories of dell.  Whereas the fastest for AREA 51 r2? (end of 2014).  I need the drives of 2 TB.  or 4 TB.

  I see no height, width, and depth to our number. But we have the same appearance as ours below =

  

  I don't know where you're looking, but all drives (SSD & regular) offered on the commercial area 51 - R2 Configurator are 6 Gbps.

• AirDrop does not work between Mac mini end of 2014 and 6 s iPhone more

  Hello!

  I'm here for the first time. A little more last year, I bought a Mac mini end of 2014 with Core i5 clocked at 2.6 GHz, 8 GB RAM and 5400 RPM HARD drive. I replaced the HDD for an SSD, Samsung EVO 850 250 GB, to be correct. I also have an iPhone 6 Plus and does not AirDrop between my devices. They discover each other. Update both OS X and iOS on a regular basis, so that's not the problem. Check on this issue and finding a solution a have met this Airdrop is not my Mac mini 2012 and I have a few questions:

  I checked that TRIM Enabler Coulon, but later on my Mac I searched this Samsung EVO can't GARNISH. What it means? Download and install TRIM Enabler would be unnecessary, because the problem isn't here? Everything is fine with the Bluetooth, WiFi, my 6s more connects to the other MacBook Pro Retina early 2015, as the new MacBook 12 "iPads and iPhones, too. Please help me, thank you in advance.

  10.10.4 and later Apple does not allow that you caraa select TRIM and third part SSD. See:

  http://osxdaily.com/2015/10/29/use-trimforce-trim-SSD-Mac-OS-x/

  Can yo test to see if AirDrop works among other devices?

  like the iPhone with another device iOS or Mac or Mac with another Mac or iOS device?

• If I move my pictures from my macbook air to the icloud storage remove them from my disk hard mac without them moved from the icloud?

  If I move my pictures from my macbook air to the icloud storage remove them from my disk hard mac without them moved from the icloud?

  Hello there, bfo4nne.

  Looks like you are trying to manage your iCloud-storage space to save space on the hard drive of your MacBook Air. The following Knowledge Base article provides a well rounded explanation of managing storage iCloud:

  Manage your iCloud-storage space

  Thank you for reaching out to the communities of Apple Support.

  Sincerely.

• How to remove the disk HARD passwordon Portege R500?

  Hello

  do you know how to remove the HARD drive password? I know the current password, but if I try to remove it by changing your current password to a blank password, it does not work.
  It has password always news.

  Thank you

  Hello

  I hope that you use the correct and just HARD drive password because it of necessary to remove and delete the existing HARD disk password.
  If you have forgot the password for HARD drive then the HARD drive should be locked and you would not be able to unlock the HARD drive!

  Generally, the HARD drive password can be deleted in the BIOS.
  Please ensure that another password would be removed too.

  I found a forum thread useful on a password disk HARD similar question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=66386𐍒

  According to the information published by the user jonr17 you must first make sure that all other like BIOS passwords, user and supervisor passwords are removed.
  Then try to remove the HDD from the BIOS password.

  Good bye