Displacement of clustered servers

Similar Questions

• Any way to limit the clusters/servers/VMs being monitored?

  I just brought it to the top of my operations with 50 licenses VM server. I want to follow my server infrastructure, but not my view infrastructure. My vCenter server has a cluster for my servers and cluster for my desktop PC. Since operations looking for everything, including my office computers, I used a lot of 50 licenses. Is there a way to tell not to montior operations some servers or clusters? I looked around and saw nothing, but I wanted to ask to be sure.

  Yes, you can do it.

  the registration of VCOps to the VC, you may have noticed there are 2 sets of credentials - administrative and collector.

  in your vcenter, create a new user (say "VCOps_collector") and gim him "no access" on the cluster, you don't want to monitor.

  then use this user for the credentials of _collector_ in VCOps. in this way, it will not collect stats for the machines that you want to not monitored.

  you will still be able to see them in VCOps well, just as there are no statistics for them

• Clustered servers listed in TMS

  How managing licenses for control of VCS MSE 8510, TCS, cluster, VCS Expressway TMS.  Each slave/peers must be added in the TMS or that the master should be added?  I know for the MSE 8510 it says not to add the slave to MSDS, only add that the master, you can access the slave by the master in TMS via a tab group.  Is it the same way for other devices, and the slave/peers take device licenses in MSDS?

  Thanks, Patrick

  Hi Patrick,

  I can tell you that VCS and it is each VCS must be added to the MSDS. When there are cluster and you click the Cluster tab and that VCS you have selected, you will see the cluster information to include peer global cluster name under 'Settings of Cluster' and then all VCS cluster under "Cluster." According to which VCS you have selected, you will see which is the 'master' and who is a 'slave' in the pane "Peer Cluster.

  As far as TCS is going, and I assume you mean TANDBERG Content Server, I need for work research since I'll admit that I don't have a TCS cluster in my lab. However, I would remind each TCS must be added to the TMS as well and it will appear as does the VCS in TMS. And this should be covered in their documentation, i.e. Add TCSs and/or TCS clusters to MSDS.

  see you soon,

  Dale

• Essentials Plus and Standard - two clusters

  Can someone confirm if it is possible to rotate the following scenario.

  4 guests in total servers

  2 first clustered servers

  2 second cluster servers

  1 x Essentials Plus license

  1 x Standard license

  Is it possible to have essentially more license (which hosts physical licenses 3) cover both servers in the cluster first, and the first server in the second cluster.  Then have a single Standard license covers the remaining in the second group server.  I would use then two separate vCenter servers to manage each cluster separately.

  Hope that makes sense

  Yes, you can manage mutiple bouquets with a unique vCenter - clusters can be in different geographic locations. You must upgrade the essentails more vCenter license since you can only manage 3 guests with this license.

• Does Windows natively support the aggregation of links?

  There are some descriptions on the aggregation of links in Wikipedia.

  http://en.Wikipedia.org/wiki/Link_aggregation

  "Note that Microsoft Windows does support not natively the aggregation of links (at least until Windows Server 2008)."

  I was wondering if this description is accurate? And what about the new windows operating system, such as Windows Server 2012 edition?

  Windows xp, Windows 7 and Windows 8 natively supports the aggregation of links? If the answer if not, anyone know why? I know, Linux and other operating systems support the aggregation of links.

  Hi, Peacegump,

  For NIC teaming or link aggregation support, you will need to contact your provider network adapter or an OEM (for example, Dell offers a driver of consolidation).  They provide you with a driver that allows the grouping of NETWORK adapters, because Windows does not offer this feature in the core of the operating system.

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/thread/f200b747-d9fb-4632-b6a4-aaf89c3dcc9b

  Grouping network adapter and clustered servers

  http://support.Microsoft.com/kb/254101

  How to use matching with Advanced Networking Services (YEARS)?

  http://www.Intel.com/support/network/sb/CS-009747.htm

  Windows 7 - aggregation of links to double bandwidth: 2 p., 2 network cards of each

  http://www.SevenForums.com/network-sharing/124720-link-aggregation-bandwidth-doubling-2pcs-2-NICs-each.html

  If you need more information, transfer your question on the Forum on TechNet.

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• DHCP - Windows 2000 - > Windows 2008

  I have two Windows 2000 servers with their own glasses, I want to build two 2008 clustered servers using the 80/20 rule and migrate the scopes on manually, no matter what advice?  If this is not the right place let me know.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the TechNet forum.
   
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• TelePresence VLAN

  We have a Manager Communications Group to serve our PBX.  We recently bought a new telepresence system and a 2nd CM cluster that is dedicated to the CTS.  Telepresence SRND States to put the CTS codec in the VLAN voice. There is no mention of this VLAN to the 2nd cluster dedicated to CM in.  I don't think that we can have clusters of 2 CM on the same VLAN voice then what would be the best practice to set the codec and the cluster of CM for the CTS?  Thank you.

  http://www.Cisco.com/en/us/docs/solutions/enterprise/video/tpendpts.html

  Hello

  It's more a question of CUCM SRND, but based on our CUCM SRND take a look at this:

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/srnd/7x/netstruc.html#wp1043629

  In general, servers of Cisco Unified Communications Manager (Unified CM) clusters, including the multimedia resource servers, reside in a data center or server farm environment. [...] Because these servers and resources are essential to voice networks, Cisco recommends distributing all servers in clusters CM unified, gateways voice hardware and centralized centralized resources among multiple switches physical and, if possible, several physical locations within the campus. This allocation of resources to ensure that, given a hardware failure (for example, a switch or switch line card failure), at least some servers in the cluster will be always available to provide telephony services. In addition, walkways, and material resources will be always available to provide access to the PSTN and to provide auxiliary services.    In addition to being distributed physically, these servers, gateways and material resources should be distributed between the VLANS separated or subnets so that, if a broadcast storm or a denial of service occurs on one VLAN, not all services and voice connectivity will be disrupted.

  ...

  There is the potential for a large number of devices in a single VLAN or broadcast domain to generate large amounts of broadcast traffic periodically, which can be problematic. A good rule of thumb is to limit the number of devices per VLAN to about 512, which equals two subnets of class C (that is, a class C address of subnet 23 bits masked). Typical access layer switches include the stackable Cisco Catalyst 2950, 3500XL, 3550 and 3750, as well as the Cisco 3560 and the larger, high-density Catalyst 4000 and 6000 switches.

  

  Note The recommendation to limit the number of devices in a single VLAN of Communications unified about 512 is not only due to the need to control the amount of broadcast traffic VLAN. For Linux Unified CM-based server platforms, the ARP cache has a limit of 1024 devices. Installation of Unified CM in a VLAN with an IP subnet that contains devices more than 1024 can cause Server Unified CM ARP cache fills up quickly, which can seriously affect the communications between the Unified CM server and other Unified Communications endpoints. Although the size of the ARP cache on server based on Windows Unified CM platforms is developing dynamically, Cisco recommends a limit of 512 devices in any VLAN regardless of the operating system that is used by the Unified CM server platform.

  To answer your question, Yes, separate the VLAN for CUCM, not only for clusters, servers (one cluster contains 1 to 20 servers (super cluster))

  Let us know if you have any questions

• JVM and JMS.

  Hi all

  We use WLS 10.3.6. We have created a JMS server and we receive files to our queues from a supplier.

  We are looking for the setting of the JMS and we read that we could create multiple Java virtual machines for many JMS servers.

  It would make sense to speed up our processes? And if so, how can we do this?

  Thanks a lot for your help!

  "What I get your answer, is that it is also possible to create several managed without clustering servers, right?"

  Yes you can.

  Note that the use of a cluster in WebLogic is not complex, it's just an extra step

  -When you created your managed servers

  -You can create a cluster (leave the messaging unicast mode) and add your managed server, that's all.

  HOWTOs are provided here: create and configure clusters

• WLST in embedded mode

  Hello

  I'm currently implementing wlst in embedded mode to automate a few creations of administration weblogic server configuration. I added the required jars in the classpath and tried to run the code. But the WLSTInterprester does not instantiate and threw under the exception:

  Exception in thread "main" java.lang.NullPointerException

  in java.io.File. < init >(Unknown Source)

  at weblogic.management.utils.PDevHelper.getUpgradeLaunchLocation(PDevHelper.java:77)

  at weblogic.management.utils.PDevHelper.getPDevClassLoader(PDevHelper.java:36)

  at weblogic.management.scripting.utils.WLSTUtil.setupOffline(WLSTUtil.java:226)

  to weblogic.management.scripting.utils.WLSTInterpreter. < init > (WLSTInterpreter.java:134)

  to weblogic.management.scripting.utils.WLSTInterpreter. < init > (WLSTInterpreter.java:76)

  to com.ncr.main.EmbeddedWLST. < init > (EmbeddedWLST.java:11)

  at com.ncr.main.EmbeddedWLST.main(EmbeddedWLST.java:27)

  Please help me solve this problem.

  Thanks in advance

  Think that I thought about it, you must set weblogic.home to point to a valid home. I was using JDeveloper 11.1.1.6 to extract the jars, but for a quick test, said a House WLS 11.1.1.7 and it worked. This got me past the NullPointerException, I just kept adding jars to correct exceptions ClassDefNotFound until he ran clean; Therefore, the minimum set that took my script

  It comes to my java command line (obviously split for readability).

  Java - cp

  . / bin:

  . / lib:

  . / lib/jython.jar:

  . / lib/wlfullclient.jar:

  . / lib/com.oracle.cie.comdev_6.3.0.0.jar:

  . / lib/com.oracle.cie.config-wls_7.1.0.0.jar:

  . / lib/com.oracle.cie.config_7.1.0.0.jar:

  . / lib/com.bea.core.xml.xmlbeans_2.1.0.0_2-5-1.jar:

  . / lib/com.oracle.cie.config-wls-schema_10.3.4.0.jar:

  . / lib/com. Oracle.Cie.wizard_6.1.0.0.jar

  -Dprod.props.file=./lib/props.txt

  -Dbea.home =

  -Dweblogic.home=/users/xxxxxx/projects/WebLogicServer/

  com.testing.wlst.WLST

  It is the output

  T3 connection: / / el01cn06:7599 with username weblogic...

  Connected to the Server Admin "AdminServer" which belongs to the domain "dev-web"

  WARNING: A non-secure protocol was used to connect to the

  Server. To ensure the safety of on-the-wire, the SSL port or

  Admin port should be used instead.

  There are 10 or clustered servers: web-cluster

  States of the servers are

  el01cn06-web08 - STOP

  el01cn06-web09 - STOP

  el01cn06-web10 - STOP

  el01cn06-web01 - running

  el01cn06-web02 - STOP

  el01cn06-web03 - STOP

  el01cn06-web04 - STOP

  el01cn06-web05 - STOP

  el01cn06-web06 - STOP

  el01cn06-web07 - STOP

  It's my embedded WLST class (hacked an example that I found through the Google Technology Institute)

  package com.testing.wlst;

  Import Java.util;

  Import weblogic.management.scripting.utils.WLSTInterpreter;

  Import org.python.util.InteractiveInterpreter;

  public class WLST

  {

  public static InteractiveInterpreter interpreter = new WLSTInterpreter();

  private static Sub connect()

  {

  StringBuffer buffer = new StringBuffer();

  buffer. Append ("Connect('weblogic','NoneOfYourBiz','t3://el01cn06:7599')");

  Interpreter.exec (buffer. ToString());

  }

  status() private static Sub

  {

  StringBuffer buffer = new StringBuffer();

  buffer. Append ("State ('web-cluster', 'Cluster')");

  Interpreter.exec (buffer. ToString());

  }

  Public Shared Sub main (String [] args)

  {

  Connect();

  Status();

  }

  }

• No recorded error DSM

  Hi all. I hope I am in the right place. Try physical installation 1-vm cluster. Both servers are running 2008 R2 Enterprise. The physical server is the use of Powerpath to connect to the network on zFCP via HBAs installed EMC SAN. Installed on both physical and virtual Clustering servers.

  Running vsphere 4.1. Here, we had the LUNS in the SAN that is presented to us. On the server of the VM, we created then two mappings of drive CRUDE to easch two LUNS presented to us by the SAN. Quorum 1 GB Player 1 LUN and the second. We also then created a second NETWORK adapter for the private network. After you install the Cluster service and then, by running the validate a Configuration, we get the following error on the server VM:

  There is no DSM on server2.domain.com

  Server1.domain.com

  EMC PowerPath DSM for symm	5	5	36 s	0
  EMC PowerPath DSM for clariion	5	5	36 s	0
  Microsoft DSM	6	1	7601	17514

  DSM named EMC PowerPath DSM for symm, installed on the node server1domain.com is missing on the node server2.domain.com
  DSM named EMC PowerPath DSM for clariion, installed on the node server1.domain.com is missing on the node server2.domain.com
  DSM named Microsoft DSM, installed on the node server1.domain.com is missing on the node server2.domain.com
  Item was not found

  Is there a way to support around that? Hoped to not have to find another physical server which is how our other hubs are configured.

  Thank you

  Carito

  I just had the same problem, but on a physical cluster connected to the San.

  I was able to fix this by going to control Panel\Programs\EMC Powerpath - Change\Modify and added the missing table support.

  Server will require a reboot. Not sure what this all help to your situation.

• Recommendations on domain DR

  I'm trying to document our recovery of WebLogic and have some questions about best practices.
  
  (1) if my physical server goes down and I'm trying to get my WebLogic domain name back up as soon as possible on another machine should I:
  (a) have the 'unwrapped' field of archive most recent (which had a 'pack' done about it)? (I guess that WebLogic will need to be installed first on the new server and do not appear in the field decompress?)
  (b) request a complete copy of the area restored from a copy of the file of the domain? (This would probably have installed first WebLogic)
  (c) have the field installed from a model that was built of generator model? (I guess WebLogic should be installed that is not part of the model?)
  
  ('B' seems to be the fastest answer to me, but please confirm if there are reservations about this approach and if/why it would be best to use the pack generator or model for this)
  
  
  (2) here, the assumption that the IP addresses would be the same for new machines, however, if they were not, these just would be a matter of editing the config.xml file to the new IP address? Or is there more to consider?
  
  (3) if the environment is clustered models make (or jar pack) on both servers? (These 2 servers in the cluster ARE registered in the area and therefore have a domain, config.xml.etc... as well).
  
  
  Thanks in advance for any experience or knowledge on how best to handle this...

  Hello
  1. I wouldn't recommend unpack approach. First thing, it is, YES, do not install the Weblogic version server exactly the same. Then run unzip command. But the main question is packing and unpacking may not copy all the resources of the domain configuration as a source of data AD/configurations settings, JDBC, JMS stuff etc. If I'm not mistaken in general we use pack/unpack to create managed on the remote machines in an env clustered servers.

  2 copy the complete folder field completely, it's a quick and sort of a reliable way to get back in business. Of course, you must have Weblogic Server same version installed in the same exact folder structure. Also if you have any external JDK, you need to install them too. Now if the IP address is different, just modify the config.xml file for updating the new IP address. It's the only place.

  3. model is mainly during the development phase. We create a domain, configure all the stuff. Then export it as a model. On the other remote machine, first install weblogic server. Run the Configuration Wizard and create the new domain based on this model. Now, some things are configurable as password etc to the field again. But the point is, you had to do extra work such as the creation of domain etc.

  4. If the Env is clustered, do you always model Pack or only from the main master machine that has AdminServer and all other configurations. Because the remote control or other machines with managed servers, just get a copy of master admin machine each time. Then managed servers is just a copy but not the original.

  So ideally, have a regular backup of the domain folder and use that is a quick fix. If this fails, use model approach. If that fails, the last option is to pack/unpack.

  Thank you
  Ravi Jegga

• Basic questions about the storage on ESXi

  Hello

  We are about to implement a VMware ESXi environment and I would like to get some clarification on the storage in ESXi before proceeding.

  Material: 3 guests and HP EVA4000 FC 4 TB SAN.

  We execute the file, mail, web, directory, application and database servers.

  Some of these services require quick I/O and some require data to be 'seen' by at least 2 virtual servers for HA.

  Can I use discs RDM for HA/Clustering servers and for those who need quick I/O, or can I use VMDK:s?

  If I present to you the entire 4 TB SAN ESXi can I then several virtual servers use certain parts of this 4 TB SAN as discs RDM and other servers use certain parts of this SAN as VMDK:s? (Do we have virtual HBA:s in ESXi?)

  Thank you

  Yes. But you must consider as usual VMDK of hard drives in this case, you must install the cluster file system there.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• isLockout on weblogic

  Hello
  
  I opened the question below and I've been advised to open it on this forum. Please help, if anyone knows how to solve this problem.
  
  isLockedOutUser on weblogic
  
  Thank you.
  
  I want to know the State of a user is locked or unlocked in weblogic. I used the code below. My localhost all it works but when I deploy on the server I can not get the correct result even the user is locked.
  I got no errors, but the status is not correct.
  
  Someone at - it an idea?
  
  public class UnlockWeblogicUser {}
  static MBeanServerConnection connection private;
  Connector of static JMXConnector private;
  Private static final service ObjectName;
  {public static
  try {}
  service =
  new ObjectName (com.bea:Name = DomainRuntimeService, Type = weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");
  } catch (MalformedObjectNameException e) {}
  System.out.println (e.getMessage ());
  throw new AssertionError (e.getMessage ());
  
  }
  }
  
  {} public boolean isUserLocked (String username)
  Ground of String = "";
  try {}
  ObjectName [] serverRT =
  (ObjectName []) connection.getAttribute (service,
  "ServerRuntimes");
  ObjectName = ssr
  (ObjectName) connection.getAttribute (serverRT [0], "ServerSecurityRuntime");
  MRR ObjectName =
  (ObjectName) connection.getAttribute (ssr, "DefaultRealmRuntime");
  Ulr = ObjectName
  (ObjectName) connection.getAttribute (MORR, "UserLockoutManagerRuntime");
  ground =
  Connection.Invoke (ulr, "isLockedOut", new Object() {username},
  New String() {"java.lang.String"}). toString();
  System.out.println ("Rezultat isUserLocked" + ground);
  
  } catch (MalformedURLException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (IOException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (Exception e) {}
  System.out.println (e.getMessage ());
  }
  System.out.println ("rezultatul" + ground);
  try {}
  Connector.Close ();
  } catch (MalformedURLException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (IOException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (Exception e) {}
  System.out.println (e.getMessage ());
  }
  If (rez.trim () .equals ("false")) {/ / System.out.println ("faaalse");}
  Returns false;
  } else {/ / System.out.println ("true");}
  Returns true;
  }
  }
  
  public public static void initConnection (String hostname, String portString,
  String username,
  String password) throws IOException,
  MalformedURLException {}
  String Protocol = 't3 ';
  Integer portInteger = Integer.valueOf (portString);
  int port = portInteger.intValue ();
  String jndiroot = "/jndi/";
  String mserver = "weblogic.management.mbeanservers.domainruntime";
  try {}
  JMXServiceURL serviceURL =
  new JMXServiceURL (Protocol, host name, port,
  jndiroot + mserver);
  H Hashtable = new Hashtable();
  h.put (Context.SECURITY_PRINCIPAL, username);
  h.put (Context.SECURITY_CREDENTIALS, password);
  h.put (JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,
  "weblogic.management.remote");
  Connector = JMXConnectorFactory.connect (serviceURL, h);
  connection = connector.getMBeanServerConnection ();
  System.out.println ("face conexiune");
  } catch (MalformedURLException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (IOException exc) {}
  System.out.println (Exc.getMessage ());
  } catch (Exception e) {}
  System.out.println (e.getMessage ());
  }
  
  }
  
  On the host name, I set the ip address and port for the administration server. It seems that he make the link, because if I put another ip from clustered servers I get error.
  How can I solve this problem?
  
  I try even with ServerSecurityRuntimeMBean.isLockedOut
  ground = connection.invoke(ulr,_"ServerSecurityRuntimeMBean.isLockedOut",_new_Object[]_{username},_new_String[]_{"java.lang.String"}).toString ();
  because I read that is obsolete and has been replaced by this. On my localhost everything works fine, but when I deploy the application on weblogic 10.3.3 I get even only false results, that the user is locked out.

  You must connect to the server for the runtime domain administrator

  When you look at your code above

  ObjectName[] serverRT = (ObjectName[])connection.getAttribute(service,"ServerRuntimes");
  ObjectName ssr = (ObjectName)connection.getAttribute(serverRT[0], "ServerSecurityRuntime");
  ObjectName rrm = (ObjectName)connection.getAttribute(ssr, "DefaultRealmRuntime");
  ObjectName ulr = (ObjectName)connection.getAttribute(rrm, "UserLockoutManagerRuntime");
  

  The serverRT is an array of serverruntimes, here you get the right server. You can browse table
  and check, for example, the name of the server (note that at position 0 is usually the adminserver). When you have the right server you can use

  rez = connection.invoke(ulr, "isLockedOut", new Object[] { username },
  new String[] { "java.lang.String" }).toString();
  System.out.println("Rezultat isUserLocked " + rez);
  

  To check if the user is locked.

• Reg: Scheduler

  Hello
  
  during the setup of Planner in the ibots tab, there is a presentation of Olivier option so server if my presentation server url is http://localhost:9704/analytics/saw.dll?Dashboard
  then I should mention as localhost:9704 or whatever default localhost:9710? If I leave it as default value what are the mistakes happen?
  
  
  Thank you

  If you have not changed any port number and also you have not configured in cluster envn then keep the value by default as it is for example "localhost:9710". This won't give any error...

  ===============
  The name of the computer and the port where the Referral Services Oracle BI is running.
  The server name must be specified and may be followed by a
  Colon and port number. If you do not specify a port number, Oracle BI
  Planner uses the default port number Web server 9710. For example,.
  If the Web server is running on Computer1 and port 8900, the value of this
  field is machine1:8900.
  If you use SAW clustered servers, specify the names of the machine as
  a comma

  ===============

  In case you face any error regarding iBots check newspapers to OracleBI_Home\server\Log\iBots

  Hope its clear